标准号 |
中文名称 |
英文名称 |
NF C23-577-1998 |
易燃涂料粉用自动静电喷雾装置 |
(AUTOMATIC ELECTROSTATIC SPRAYING INSTALLATIONS FOR FLAMMABLE COATING POWDER. (EUROPEAN STANDARD EN 50 177).) |
NF C23-579-10-2003 |
爆炸性气体环境用电气设备.第10部分:危险场所的分类 |
(Electrical apparatus for explosive gas atmospheres - Part 10 : classification of hazardous areas.) |
NF C23-579-14-1999 |
爆炸气体环境用电气设备.第14部分:危险区(矿井除外)的电气设备 |
(Electrical apparatus for explosive gas atmospheres. Part 14 : electrical installations in hazardous areas (other than mines).) |
NF C23-579-17-2003 |
爆炸性气体环境用电气设备.第17部分:危险场所(矿井除外)电气设备的检验和维护 |
(Electrical apparatus for explosive gas atmospheres - Part 17 : inspection and maintenance of electrical installations in hazardous areas (other than mines).) |
NF C23-581-1-1-2000 |
用于存在易燃灰尘的电气装置.第1-1部分:由外壳保护的电气装置.组装和试验 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-1 : electrical apparatus protected by enclosures - Construction and testing.) |
NF C23-581-1-1/A1-2003 |
易燃粉尘区用电气设备.第1-1部分:用外壳保护的电气设备.结构和检验 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-1: electrical apparatus protected by enclosures - Construction and testing.) |
NF C23-581-1-2-2000 |
用于存在易燃灰尘的电气装置.第1-2部分:由外壳保护的电气装置.选择,安装和维修 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-2 : electrical apparatus protected by enclosures - Selection, installation and maintenance.) |
NF C23-581-1-2/A1-2003 |
易燃粉尘区用电气设备.第1-2部分:用外壳保护的电气设备.选择、安装和维护 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-2: electrical apparatus protected by enclosures - Selection, installation and maintenance.) |
NF C23-581-2-1-2000 |
用于存在易燃灰尘的电气装置.第2-1部分:试验方法.测定灰尘最低燃烧温度的试验方法 |
(Electrical apparatus for use in the presence of combustible dust - Part 2-1 : test methods - Methods for determining the minimum ignition temperatures of dust.) |
NF C23-581-3-2002 |
存在可燃性尘埃时使用的电气设备.第3部分:存在或可能存在可燃性尘埃的地区分类 |
(Equipment for use in the presence of combustible dust - Part 3 : classification of areas where combustible dusts are or may be present.) |
NF C23-584-2000 |
II组1G类设备的电工仪器的结构、试验和标记的特殊要求 |
(Special requirements for construction, test and marking of electrical apparatus of equipment group II, Category 1G.) |
NF C23-591-2002 |
检测家庭住所中的一氧化碳的电气设备.试验方法和性能要求 |
(Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements.) |
NF C23-594-2000 |
家用易燃气体监测用电气设备.试验方法和性能要求 |
(Electrical apparatus for the detection of combustibe gases in domestic premises - Test methods and performance requirements.) |
NF C26-011-1-2003 |
绝缘材料.电工用工业刚性模制矩形和六边形横截面的热固性树脂基层压管材和棒材.第1部分:定义、名称与符号和 |
(Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1 : definitions, des) |
NF C26-111-2003 |
云母基绝缘材料规范.第1部分:定义和一般要求 |
(Specification for insulating materials based on mica - Part 1 : definitions and general requirements.) |
NF C26-112-1997 |
云母基绝缘材料规范.第2部分:试验方法 |
(Specification for insuslating materials based on mica. Part 2 : methods of test.) |
NF C26-113-1-1995 |
云母基绝缘材料规范.第3部分:单项材料规范.第1活页:换向器隔板和材料 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 1 : commutator separators and materials.) |
NF C26-113-2-1995 |
云母基绝缘材料规范.第3部分:单一材料规范.第2活页:云母纸 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 2 : mica paper.) |
NF C26-113-3-1995 |
云母基绝缘材料规范.第3部分:单项材料规范.第3活页:加热设备用硬质云母材料 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 3 : specification for rigid mica materials for heating equipment.) |
NF C26-113-4-1995 |
云母基绝缘材料规范.第3部分:单项材料规范.第4活页:用B级环氧树脂粘合剂粘结的聚酯薄膜衬底云母纸 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 4 : polyester film-backed mica paper with a B-stage epoxy resin binder.) |
NF C26-113-5-1995 |
云母基绝缘材料规范.第3部分:单项材料规范.第5活页:用环氧树脂粘合剂粘结的待浸渍处理的玻璃纤维织物衬底云 |
(Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).) |
NF C26-113-6-1995 |
云母基绝缘材料规范.第3部分:单项材料规范.第6活页:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.) |
NF C26-113-7-1996 |
云母基绝缘材料规范.第3部分:单项材料规范.第7活页:单导体胶带用带环氧树脂粘结剂的聚酯薄膜云母纸 |
(Insulating materials based on mica. Part 3 : specification of individual materials. Sheet 7 : polyester film mica paper with an expoxy resin binder for single conductor taping.) |
NF C26-113-8-1996 |
云母基绝缘材料规范.第3部分:单项材料规范.第8活页:抗燃安全电缆用云母纸带 |
(Insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 8 : mica paper tapes for flame-resistant security cables.) |
NF C26-113-9-1996 |
云母基绝缘材料规范.第3部分:单项材料规范.第9活页:单项材料规范.第9活页:压制胶合云母板 |
(Insulating materials based on mica. Part 3 : specification for individual materials. Sheet 9 : moulding micanite.) |
NF C26-121-1971 |
固体绝缘材料.云母基制品.选型件.规则 |
(SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS - MOULDED PARTS. REQUIREMENTS.) |
NF C26-122-1971 |
固体绝缘材料.成卷云母基制品.规范 |
(SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS IN ROLLS. SPECIFICATIONS.) |
NF C26-125-1972 |
固体绝缘材料.软云母基制品.规范 |
(SOLID INSULATING MATERIALS. FLEXIBLE MICA PRODUCTS. SPECIFICATION.) |
NF C26-131-1-1995 |
电工用纸板和厚纸板规范.第1部分:定义和一般要求(欧洲标准EN 60 641-1) |
(Specifications for pressboard and presspaper for electrical purposes. Part 1 : definitions and general requirements.) |
NF C26-131-2-1996 |
电工用压纸板和厚纸板规范.第2部分:试验方法 |
(Specification for pressboard and presspaper for electrical purposes. Part 2 : methods of test.) |
NF C26-132-1-1996 |
层压板规范.第1部分:定义、分类和一般要求 |
(Specification for laminated pressboard. Part 1 : definitions, classification and general requirements.) |
NF C26-132-2-1996 |
层压板规范.第2部分:试验方法 |
(Specification for laminated pressboard. Part 2 : methods of test.) |
NF C26-132-3-1-1996 |
层压板规范.第3部分:各种材料规范.活页1:预压层压板规范.型号LB 3.1.1,3.1.2,3.3.1和3.3.2 |
(Specification for laminated pressboard. Part 3 : specifications for individual materials. Sheet 1 : specifications for laminated precompressed board. Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2.) |
NF C26-133-1-1994 |
电工用压纸板和厚纸板.第3部分:个别材料规范.第1活页:B.01、B.2.1、B.2.3、B.3.1、B.3.3、B.4.1、B.4.3、B. |
(Specification for pressboard and presspaper for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : requirements for pressboard, types B.O.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1.) |
NF C26-133-2-1994 |
电工用压纸板和厚纸板.第3部分:个别材料规范.第2活页:P.2.1、P.4.1、P.4.2、P.4.3、P.6.1和P.7.1型厚纸板的 |
(Specification for pressboard and presspaper for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for presspaper, type P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1.) |
NF C26-136-1-1998 |
电气用途的波纹状压力板和压力纸板.定义,标记和一般要求 |
(Corrugated pressboard and presspaper for electrical purposes. Part 1 : definitions, designations and general requirements.) |
NF C26-136-2-1999 |
电工用波纹纸板和纸板.第2部分:试验方法 |
(Corrugated pressboard and presspaper for electrical purposes. Part 2 : methods of test.) |
NF C26-137-1-1997 |
电工用芳族压板.第1部分:定义、名称与符号和总要求 |
(Aramid pressboard for electrical purposes. Part 1 : definitions, designations and general requirements.) |
NF C26-137-2-1997 |
电工用芳族厚纸板.第2部分:试验方法(欧洲标准EN 61 629-1) |
(Aramid pressboard for electrical purposes. Part 2 : methods of test.) |
NF C26-144-1-1995 |
电绝缘用复合柔性材料.第1部分:定义和一般要求 |
(Combined flexible materials for electrical insulation. Part 1 : definitions and general requirements.) |
NF C26-144-1/A1-1997 |
NF EN 60626-1-1995的修改1 |
() |
NF C26-144-2-1996 |
电气绝缘用复合柔软材料规范.第2部分:试验方法(欧洲标准EN 60 626-2) |
(Combined flexible materials for electrical insulation. Part 2 : methods of test.) |
NF C26-144-3-1997 |
电绝缘用复合柔性材料.第2部分:单项材料规范 |
(Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials.) |
NF C26-144-3/A1-1999 |
电绝缘用复合柔性材料.第3部分:单项材料规范 |
(Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials.) |
NF C26-145-1-1998 |
电气应用的塑料膜的规范.第1部分:定义和一般要求 |
(Specification for plastic films for electrical purposes. Part 1 : definitions and general requirements.) |
NF C26-145-2-1998 |
电器用塑料薄膜规范.第2部分:试验方法 |
(Specification for plastic films for electrical purposes. Part 2 : methods of test.) |
NF C26-145-2/A1-2002 |
电器用塑料薄膜规范.第2部分:试验方法 |
(Specification for plastic films for electrical purposes - Part 2 : methods of test.) |
NF C26-145-3-1-1998 |
电工用塑料薄膜.第3部分:单项材料规范.第1活页:电容器用双轴取向聚丙烯(PP)薄膜 |
(Plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors.) |
NF C26-145-3-2-1998 |
电气应用的塑料膜的规范.第3部分:个体材料规范.第2章:用于电气绝缘的平衡双轴定向PEP薄膜的要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for balanced biaxially oriented polyethylene terephtalate (PET) films used for electrical insulation.) |
NF C26-145-3-3-1998 |
电器用途塑料膜规范.第3部分:个别材料规范.第3章:电气绝缘用PC膜要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for polycarbonate (PC) films used for electrical insulation.) |
NF C26-145-3-4-1995 |
电工用塑料薄膜规范.第3部分:各别材料规范.第4-6活页:电绝缘用聚酰亚胺薄膜要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheets 4 to 6 : requirements for polyimide films used for electrical insulation.) |
NF C26-145-3-7-1998 |
电气用塑料膜规范.第3部分:个体材料规范.第7章:电气绝缘用FEP膜的要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for fluoroethylene-propylene (FEP) films used for electrical insulation.) |
NF C26-146-1994 |
电气用压感胶纸带.第1部分:一般要求 |
(Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 1 : general requirements.) |
NF C26-147-1995 |
电气用途压敏粘结带的规范.第2部分:试验方法 |
(Specification for pressure-sensitive adhesive tapes for electrical purposes. Part 2 : methods of test.) |
NF C26-148-1-1998 |
电气用压力敏感粘接带.第3部分:个体材料规范.第1节:带压力敏感粘接的PVC膜带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : PVC film tapes with pressure-sensitive adhesive.) |
NF C26-148-10-1996 |
电工用压敏粘带规范.第3部分:单项材料规范.第10活页:带有橡胶热固性胶的乙酸丁酸薄膜胶粘带的要求 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 10 : requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive.) |
NF C26-148-11-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第11活页:纤维素质绉纹纸和带有橡胶热固胶粘剂的聚对苯二甲酸乙酯 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 11 : combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive.) |
NF C26-148-12-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第12活页:带有压敏胶粘剂的聚乙烯薄膜胶粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 12 : polyethylene film tapes with pressure-sensitive adhesive.) |
NF C26-148-13-1996 |
电工用压敏粘带规范.第3部分:单项材料规范.第13活页:一侧涂覆热塑材料、另一侧带有橡胶制热固性胶的结合纤 |
() |
NF C26-148-16-2003 |
电工用压敏胶粘带.第3部分:单项材料规范.活页16:涂压敏粘合剂的聚酯薄膜/玻璃长丝复合带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 16 : polyester film/glass filament combinations with pressure-sensitive adhesive.) |
NF C26-148-18-2003 |
电工用压敏胶粘带.第3部分:单项材料规范.活页18:涂压敏粘合剂的聚丙烯薄膜胶粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 18 : polypropylene film tapes with pressure-sensitive adhesive.) |
NF C26-148-19-2003 |
电工用压敏胶粘带.第3部分:单项材料规范.活页19:两面涂压敏粘合剂的各种衬料制胶粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 19 : tapes made from various backing materials with pressure-sensitive adhesive on) |
NF C26-148-2-1998 |
电器用途塑料膜规范.第3部分:个别材料规范.第2章:丙烯酸交叉链接橡胶热固聚酯膜带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : polyester films tapes with rubber thermosetting of acrylic crosslinked adhesives.) |
NF C26-148-3-1998 |
电气用压力敏感粘接带.第3部分:个体材料规范.第3节:带橡胶热固粘接的聚合物膜带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : polyester film tapes rubber thermoplastic adhesive.) |
NF C26-148-4-1998 |
电气用压力敏感粘接带.第3部分:个体材料规范.第4节:带橡胶热塑粘接的,皱折的,纤维素纸 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : cellulosic paper, creped, with rubber thermosetting adhesive.) |
NF C26-148-5-1998 |
电气用压力敏感粘接带.第3部分:个体材料规范.第5节:带橡胶热塑粘接的,非皱折的,纤维素纸 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : cellulosic paper, non creped, with rubber thermosetting adhesive.) |
NF C26-148-6-1998 |
电气用压力敏感粘接带.第3部分:个体材料规范.第6节:带丙烯酸树脂热塑粘接的多聚碳膜 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : polycarbonate film tapes with acrylic thermoplastic adhesive.) |
NF C26-148-7-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第7活页:带有压敏胶粘剂的聚酰亚胺薄膜胶粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : polyimide film tapes with pressure-sensitive adhesive.) |
NF C26-148-8-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第8节:带有压敏胶粘剂的玻璃纤维 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 8 : glass fabric with pressure-sensitive adhesive.) |
NF C26-148-9-1998 |
电工用压敏胶粘带.第3部分:单项材料规范.第9活页:带有橡胶热固胶粘剂的纤维素醋酸纺织纤维带 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 9 : cellulose acetate woven fabric tapes with rubber thermosetting adhesive.) |
NF C26-155-1997 |
玻璃和玻璃聚酯纤维机织带的规范.第1部分:定义、分类和总要求 |
(Specification for glass and glass polyester fibre woven tapes. Part 1 : definitions, classification and general requirements.) |
NF C26-156-1997 |
玻璃和玻璃聚酯纤维机织带的规范.第2部分:试验方法 |
(Specification for glass and glass polyester fibre woven tapes. Part 2 : methods of test.) |
NF C26-157-1-1995 |
玻璃和玻璃聚酯纤维机织带的规范.第3部分:专用材料规范.第1活页:1,2,3型织带 |
(Glass and glass polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : types 1, 2 and 3 tapes.) |
NF C26-158-1-1998 |
聚酯纤维机织带规范.第1部分:定义、名称与符号和一般要求 |
(Specification for polyester fibre woven tapes. Part 1 : definitions, designation and general requirements.) |
NF C26-158-2-1998 |
聚酯纤维机织带规范.第2部分:试验的方法 |
(Specification for polyester fibre woven tapes. Part 2 : methods of test.) |
NF C26-158-3-1-1995 |
聚酯纤维机织带.第3部分:专用材料规范.第1活页:常规的或无梭织机编织带 |
(Polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : tapes woven on conventional or shuttleless looms.) |
NF C26-160/A3-1986 |
NF C 26-160-1985的补充3 |
() |
NF C26-161-1999 |
电绝缘用树脂基活性化合物.第1部分:定义和一般要求(EN 60455-1) |
(Resin based reactive compounds used for electrical insulation. Part 1 : definitions and general requirements.) |
NF C26-162-1999 |
电绝缘用的树脂类化合物.第2部分:试验方法 |
(Resin based reactive compounds used for electrical insulation. Part 2 : methods of test.) |
NF C26-163-1-2003 |
电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第1活页:未加填料的环氧树脂化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : unfilled epoxy resinous compounds.) |
NF C26-163-11-1993 |
电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:单项材料规范.第11活页:环氧树脂基粉末涂料 |
(Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 11 : epoxy resin-based coating powders.) |
NF C26-163-2-2003 |
电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第2活页:石英填充的环氧树脂化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : quartz filled epoxy resinous compounds.) |
NF C26-163-3-2003 |
电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第3活页:未加填料的聚氨酯化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 3 : unfilled polyurethane compounds.) |
NF C26-163-4-2003 |
电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第4活页:加填料的聚氨酯化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 4 : filled polyurethane compounds.) |
NF C26-163-5-1993 |
电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:单项材料规范.第5活页:不饱和聚酯填充性树脂 |
(Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 5 : unsaturated polyester impregnating resins.) |
NF C26-167-1996 |
电气用基于热固性树脂的工业硬质圆形层压管和棒材.第2部分:试验方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 2 : methods of test.) |
NF C26-168-1-1995 |
电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材料规范-活页1:圆层压轧制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for indivudual materials. Sheet 1 : round laminated rolled tubes.) |
NF C26-168-2-1995 |
电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材料规范-活页2:圆层压压制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : round laminated moulded tubes.) |
NF C26-168-3-1995 |
电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材料规范-活页3:圆层压压制杆 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : round laminated moulded rods.) |
NF C26-170-1984 |
固体绝缘材料.电气用刚纸.一般要求 |
(Solid insulating materials. Vulcanized fibre for electrical purposes. General requirements.) |
NF C26-170/A1-1987 |
NF C 26-170-1984的补充1 |
() |
NF C26-1701-1987 |
C26-170-84听补充1 |
() |
NF C26-175-1998 |
电气用途的非浸渍增加密度的层状木材.第1部分:定义,标识和一般要求 |
(Non-impregnated densified laminated wood for electrical purposes. Part 1 : definitions, designation and general requirements.) |
NF C26-176-2002 |
电气设备用非浸渍致密层压板规范.第2部分:试验方法 |
(Specifications for non-impregnated, densified laminated wood for electrical purposes - Part 2 : methods of test.) |
NF C26-177-1-1999 |
电气用途的非浸渍增加密度的层状木材.第3部分:单项材料规范.第1节:山毛榉板制产品 |
(Non-impregnated densified laminated wood for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : sheets produced from beech veneer.) |
NF C26-177-2-2002 |
电气设备用非浸渍致密层压板规范.第3部分:单项材料规范.表2:由毛榉木薄板制成的圆材 |
(Non-impregnated densified laminated wood for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : rings produced from beech veneer.) |
NF C26-181-1994 |
以热固性树脂为基的电工用工业刚性层压板规范.第1部分:定义、标记和一般要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 1 : definitions, designations and general requirements.) |
NF C26-182-1994 |
电气用基于热固性树脂的工业硬质层压板材规范.第2部分:试验方法 |
(Specification for industrial rigide laminated sheets based on thermosetting resins for electrical purposes. Part 2 : methods of test.) |
NF C26-183-1-1994 |
电工用热固性树脂基工业刚性层压板规范.第3部分:单项材料规范.第1篇:工业刚性层压板的型号 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : types of industrial rigid laminated sheets.) |
NF C26-183-1/A1-1997 |
NF EN 60893-3-1-1994的修改1 |
() |
NF C26-183-11-1997 |
NF C26-183-1-1994的补充件1 |
() |
NF C26-183-2-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:单项材料规范.第2篇:环氧树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminated sheets based on epoxyde resins.) |
NF C26-183-2/A1-2000 |
电气工业用热固性树脂基的刚性层压薄板规范.第3部分:单项材料规范.第2节:环氧树脂基的刚性层压薄板要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminate) |
NF C26-183-3-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第3活页:密胺树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for rigid laminated sheets based on melamine resins.) |
NF C26-183-4-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第4活页:酚醛树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : requirements for rigid laminated sheets based on phenolic resins.) |
NF C26-183-5-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第5活页:聚酯树脂基刚性压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : requirements for rigid laminated sheets based on polyester resins.) |
NF C26-183-6-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第6活页:硅氧烷树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : requirements for rigid laminated sheets based on silicone resins.) |
NF C26-183-7-1995 |
电工用热固性树脂基工业刚性层压板规范.第3部分:专用材料规范规范.第7活页:聚酰亚胺树脂基刚性层压板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for rigid laminated sheets based on polyimide resins.) |
NF C26-191-1995 |
电工用工业刚性圆热固树脂层压管和棒材 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 1 : general requirements.) |
NF C26-197-2003 |
电工用纤维素纸.第2部分:试验方法 |
(Cellulosic papers for electrical purposes - Part 2 : methods of test.) |
NF C26-200-1973 |
绝缘材料试验方法.电气绝缘材料在试验前和试验中应遵循的条件 |
(Methods of testing insulating materials. Standard conditions for usterials.) |
NF C26-202-1975 |
绝缘材料.老化试验数据的统计分析 |
(Insulating materials statistical analysis of ageing test data.) |
NF C26-203-1985 |
试验方法.用绕管法评价软片型绝缘材料耐热性的试验方法 |
(Test method for evaluating thermal endurance of flexible sheet materials using the wrappel tube method.) |
NF C26-205-1993 |
测定电绝缘液体玻璃化转变温度的试验方法 |
(Methods of test for the determination of the galss transition temperature of electrical insulationg liquids.) |
NF C26-206-1985 |
电气隔热的评价和分类 |
(Thermal evaluation and classification of electrical insulation.) |
NF C26-207-2000 |
电气绝缘系统的评估和质量检定 |
(Evaluation and qualification of electrical insulation systems.) |
NF C26-209-1985 |
制订评价电气绝缘系统耐热性的试验方法指南 |
(Guide for the preparation of test procedures for evaluating the thermal endurance of electrical insulation systems.) |
NF C26-212-1989 |
测定暴露于电热金属线源时固体电绝缘材料可燃性的试验方法. |
(Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources.) |
NF C26-212/A1-1992 |
NF C 26-212-1989的补充1 |
() |
NF C26-2121-1992 |
NF C26-212-1989的补充件1 |
() |