标准号 |
中文名称 |
英文名称 |
NF P22-470-1989 |
金属结构.静负荷焊接连接.结构规定和焊接检验 |
(STEEL CONSTRUCITON. WELDED CONNECTIONS. DETAILS AND DESIGN OF WELDS.) |
NF P22-471-1984 |
金属结构.焊接连接.制造 |
(Metallic construction. Welded joints. Fabrication.) |
NF P22-473-1986 |
金属结构.焊接连接.无损检验范围 |
(METAL CONSTRUCTION. WELDED ASSEMBLIES. RANGES OF NON DESTRUCTIVES CONTROL.) |
NF P22-615-1978 |
桥式活动吊车转动梁.工作变形和公差 |
(METAL CONSTRUCTION. ROLLING BEAMS FOR OVERHEAD CRANES. DEFORMATIONS IN OPERATION AND TOLERANCES.) |
NF P22-800-1981 |
金属结构.中构件在工厂的制备 |
(Metal construction. Preparation of parts in the factory.) |
NF P23-201-1-2000 |
DTU 36.1.建筑工程.木连接.第1部分:技术规范 |
(DTU 36.1 - Building works - Wood joinery - Part 1 : technical specifications.) |
NF P23-201-1/A1-2002 |
DTU 36.1.建筑工程.木连接.第1部分:技术规范 |
(DTU 36.1 - Building works - Wood joinery - Part 1 : technical specifications.) |
NF P23-201-2-2000 |
DTU 36.1.建筑工程.个人合同.木连接.第2部分:特殊条款 |
(DTU 36.1 - Building works - Private contracts - Wood joinery - Part 2 : special clauses.) |
NF P23-201-2/A1-2002 |
DTU 36.1.建筑工程.私人合同.木材连接.第2部分:专用条款 |
(DTU 36.1 - Building works - Private contracts - Wood joinery - Part 2 : special clauses.) |
NF P23-300-1983 |
木作.内门门扇尺寸 |
(WOODEN INTERIOR CONNECTING DOORS. SPECIFICATIONS.) |
NF P23-301-1987 |
木作.门框.一般特性 |
(JOINERY PRODUCTS. ENTRANCE DOORSETS. GENERAL REQUIREMENTS.) |
NF P23-302-1983 |
木作.木制内平面门.一般特性 |
(Flat wooden doors for indoor use. General characteristics.) |
NF P23-303-1984 |
木制通道内平面门.规范 |
(Wooden interior connecting doors. Specifications.) |
NF P23-304-1984 |
木制平台内平面门.规范 |
(Wooden interior landing doors. Specifications.) |
NF P23-305-1988 |
木制窗、落地窗和木制固定窗框技术规范 |
(TECHNICAL SPECIFICATIONS FOR WOODEN WINDOWS,FRENCH WINDOWS AND FIXED FRAME.) |
NF P23-305/A1-1997 |
补充件1 |
() |
NF P23-3051-1997 |
NF P23-305-88的补充件1 |
() |
NF P23-403-1974 |
木作.窗架的构造 |
(WOOD JOINERY. COMPOSITION OF CASEMENTS.) |
NF P23-404-1959 |
木作.木制系列窗.尺寸 |
(WOOD JOINERY. MASS PRODUCED WOODEN WINDOWS. DIMENSIONS.) |
NF P23-444-1974 |
木作.地下室门 |
(WOOD JOINERY. CELLAR DOORS.) |
NF P23-445-1974 |
木作.带水平和斜式撑构的木制百叶窗 |
(WOOD JOINERY. WOODEN SHUTTERS WITH HORIZONTAL AND SLANT BRACING.) |
NF P23-501-1986 |
木作.门周围设备有1/4小时防火和防烟装置 |
(JOINERY PRODUCTS. FLAME PROTECTION AND FIRE STOP DOORSETS (1/4 H).) |
NF P24-203-1-1993 |
建筑工程.金属制品.第11部分:技术规范 |
(DTU 37-1. BUILDING WORKS. METAL JOINERY. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P24-203-1/A1-2001 |
DTU 37.1.建筑工程.金属制品.第1部分:技术规范 |
(DTU 37.1 - Building works - Metal joinery - Part 1 : technical specifications.) |
NF P24-203-2-1993 |
建筑工程.私人合同.金属制品.第2部分:特别条款 |
(DTU 37-1. BUILDING WORKS. PRIVATE CONTRACTS. METAL JOINERY. PART 2 : SPECIAL CLAUSES.) |
NF P24-204-1-2003 |
DTU 37.2.建筑工程.现有框架翻新中金属细木工制品.第1部分:技术规范 |
(DTU 37.2 - Building works - Metal joinery in renovation on existing frame - Part 1 : technical specifications.) |
NF P24-204-2-2003 |
DTU 37.2.建筑工程.专用市场.现有框架翻新时的金属细木工制品.第2部分:特殊条款 |
(DTU 37.2 - Building works - Private markets - Metal joinery during renovation on existing frame - Part 2 : special clauses.) |
NF P24-301-1980 |
金属门窗.落地窗和固定窗框技术规范 |
(TECHNICAL SPECIFICATIONS FOR METAL WINDOWS,FRENCH WINDOWS AND FIXED FRAME.) |
NF P24-351/A1-2003 |
金属细木工.窗、幕墙和金属框板.防腐及表面状态的保护 |
(Metal joinery - Windows, curtain walling, metal frame panels - Protection against corrosion and conservation of surface conditions.) |
NF P24-501-1995 |
窗户制造用未增塑聚氯乙烯型材耐降落物冲击力的测定 |
(Unplasticized polyvinychloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to impact of main profiles by falling mass.) |
NF P24-502-1995 |
窗户制造用未增塑聚氯乙烯型材加热150℃后外观试验方法 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Appearance after exposure at 150 degrees celsius. Test method.) |
NF P24-503-1995 |
窗户制造用未增塑聚氯乙烯型材热收缩性的测定 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of heat reversion.) |
NF P24-504-2000 |
未增塑聚氯乙烯纤维门窗的外形.耐人工气候老化性测定 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering.) |
NF P24-505-2000 |
门窗制造用未增塑聚氯乙烯型材.焊接弯头和T接头强度的测定 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints.) |
NF P24-506-2003 |
门窗制造用未增塑聚氯乙烯(PVC-U)型材.分类、要求和试验方法 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods.) |
NF P24-802-1-2001 |
DTU 35.1.建筑工程.可拆卸部分.第1部分:技术条款的合同项 |
(DTU 35.1 - Building works - Removable and dismountable partitions - Part 1 : contract bill of technical clauses.) |
NF P24-802-1/A1-2003 |
DTU 35.1.建筑工程.可拆卸部分.第1部分:技术条款的合同项 |
(DTU 35.1 - Building works - Removable and dismountable partitions - Part 1 : contract bill of technical clauses.) |
NF P24-802-2-2001 |
DTU 35.1.建筑工程.可拆卸部分.第2部分:特殊条款的合同项 |
(DTU 35.1 - Building works - Removable and dismountable partitions - Part 2 : contract bill of special clauses.) |
NF P25-101-1980 |
建筑物外部闭锁装置.定义.分类.名称 |
(EXTERIOR CLOSING APPARATUS FOR BUILDINGS. DEFINITIONS. CLASSIFICATION. DESIGNATION.) |
NF P25-201-1-1993 |
DTU 34-1.建筑工程.外露单建筑用百叶窗.第1部分:技术规范 |
(DTU 34-1. BUILDING WORKS. SHUTTERS FOR OPEN BAYS. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P25-201-1/A1-1994 |
DTU 34.1.NF P 25-201-1-1993的修改件1 |
() |
NF P25-201-11-1994 |
DTU 34-1.NF P25-201-1-93的修改件1 |
() |
NF P25-201-2-1993 |
建筑工程.私人合同.外露单建筑用百叶窗.第2部分:特别条款 |
(DTU 34-1. BUILDING WORKS. PRIVATE CONTRACTS. SHUTTERS FOR OPEN BAYS. PART 2 : SPECIAL CLAUSES.) |
NF P25-302-2000 |
工业,商业和车库门.对风负载的抗性.分级 |
(Industrial, commercial and garage doors and gates - Resistance to wind load - Classification.) |
NF P25-303-2000 |
工业,商业和车库门.对水渗透的抗性.分级 |
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification.) |
NF P25-304-2000 |
工业,商业和车库门.空气渗透性.分级 |
(Industrial, commercial and garage doors and gates - Air permeability - Classification.) |
NF P25-305-2000 |
工业,商业和车库门.空气渗透性.试验方法 |
(Industrial, commercial and garage doors and gates - Air permeability - Test method.) |
NF P25-306-2000 |
工业,商业和车库门.热传输性.计算要求 |
(Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation.) |
NF P25-307-1999 |
工业、商业和车库用门.术语.第1部分:门的类型 |
(Industrial, commercial and garage doors and gates - Terminology - Part 1 : types of doors.) |
NF P25-308-1999 |
工业、商业和车库用门.术语.第2部分:门的部件 |
(Industrial, commercial and garage doors and gates - Terminology - Part 2 : parts of doors.) |
NF P25-309-2001 |
工业、商业和车库用门和大门.防风.试验和计算 |
(Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation.) |
NF P25-310-2001 |
工业、商业和车库用门和大门.动力门的使用安全.要求 |
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements.) |
NF P25-311-2001 |
工业,商业和车库门.使用动力操作门时的安全性.试验方法 |
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods.) |
NF P25-312-2000 |
工业,商业和车库门.对渗水性的耐性.试验方法 |
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method.) |
NF P25-314-2001 |
工业,商业和车库门.机械方面.要求 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements.) |
NF P25-315-2001 |
工业,商业和车库门.机械方面.试验方法 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods.) |
NF P25-318-2002 |
工业、商业和车库门的安装和使用 |
(Industrial, commercial and garage doors and gates - Installation and use.) |
NF P25-319-2003 |
工业、商业和车库用门.电动门的安全装置.要求和试验方法 |
(Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods.) |
NF P25-353-1995 |
带窗的外窗洞用锁闩.刚性PVC挤压材制板式锁闩.规范.使用性能.试验方法 |
(Shutters for external openings fitted with windows. PVC profile shutters. Specifications suitability for use, tests method.) |
NF P25-362-1992 |
门窗洞和通门用百叶门(窗).技术规范 |
(Shutters for open bays and gates - Technical specifications.) |
NF P25-362/A1-2001 |
门窗洞和通门用百叶门(窗).技术规范 |
(Shutters for open bays and gates - Technical specifications.) |
NF P25-501-1980 |
外部窗孔闭锁装置.试验方法 |
(CLOSING FOR EXTERIOR OPENING EQUIPED WITH WINDOWS. METHODS OF TEST.) |
NF P25-502-1999 |
百页窗和屏风.操作力的测定.试验方法 |
(Shutters and blinds - Measurement of operating force - Test methods.) |
NF P25-503-2000 |
百叶窗,内部和外部遮蔽物.错用.试验方法 |
(Shutters, external and internal blinds - Misuse - Test methods.) |
NF P25-504-2000 |
电力操作的百叶窗和遮蔽物.使用中的安全性.传输力的测量 |
(Shutters and blinds power operated - Safety in use - Measurement of the transmitted force.) |
NF P25-505-2002 |
遮板、内百叶窗、外百叶页窗.术语、词汇和定义 |
(Shutters, external blinds, internal blinds - Terminology, glossary and definitions.) |
NF P25-506-2002 |
天窗和温室滚动遮板.耐雪荷载性.试验方法 |
(Skylight and conservatory roller shutters - Resistance to show load - Test method.) |
NF P25-507-2001 |
气密遮板.透气性试验 |
(Airtight shutters - Air permeability test.) |
NF P25-509-2002 |
百叶窗和防护板.抗温升性.产品的空气渗透性分级 |
(Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product.) |
NF P25-510-2003 |
百叶窗.硬物体冲击试验方法 |
(Shutters - Hard body impact - Test method.) |
NF P25-602-2001 |
外遮帘和遮板.对风负载的耐性.试验方法 |
(External blinds and shutters - Resistance to wind loads - Method of testing.) |
NF P25-603-1999 |
外防护板.对水积聚负载的抗性.试验方法(欧洲标准EN 1933) |
(Exterior blinds. Resistance to load due to water accumulation. Test method.) |
NF P26-101-1956 |
五金.锁.定义.分类.名称 |
(HARDWARE. LOCKS. DEFINITIONS. CLASSIFICATION. DESIGNATION.) |
NF P26-102-1971 |
窗栓.定义.分类,名称 |
(BUILDING HARDWARE. CASEMENT BOLTS. DEFINITIONS. CLASSIFICATION. DESIGNATION.) |
NF P26-301-1989 |
五金.建筑物用锁的一般特性 |
(Hardware. General characteristics of building locks.) |
NF P26-303-1976 |
窗栓.特性和试验 |
(BUILDING HARDWARE. CASEMENT BOLTS.) |
NF P26-309-1958 |
五金.称作第一熔化的铝合金重力模制五金用品 |
(HARDWARE. GRAVITY CAST ALUMINIUM ALLOY HARDWARE.) |
NF P26-313-2002 |
建筑五金件.杠杆式门拉手和旋钮装置.要求和试验方法 |
(Building hardware - Lever handles and knob furniture - Requirements and test methods.) |
NF P26-314-1991 |
五金.建筑用锁.管状锁 |
(Hardware. Locks for building. Tubular locks.) |
NF P26-315-1997 |
建筑五金.水平棒操纵的应急出口装置.要求和试验方法 |
(Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods.) |
NF P26-315/A1-2002 |
建筑五金.水平棒操纵的紧急出口装置.要求和实验方法 |
(Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods.) |
NF P26-316-1997 |
建筑五金.控制门锁装置.要求和试验方法(欧洲标准EN 1154) |
(Building hardware. controlled door closing devices. Requirements and test methods.) |
NF P26-316/A1-2003 |
建筑五金.控制门的自动关闭装置.要求和试验方法 |
(Building hardware - Controlled door closing devices - Requirements and test methods.) |
NF P26-318-1997 |
建筑五金.门拉手或推板控制的应急出口装置.要求和试验方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods.) |
NF P26-318/A1-2002 |
建筑五金.由水平把手或推板控制的紧急出口装置.要求和试验方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods.) |
NF P26-319-1997 |
建筑五金.双开弹簧门用电力开门装置.要求和试验方法(欧洲标准EN 1155) |
(BUILDING HARDWARE. ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1155).) |
NF P26-319/A1-2003 |
建筑五金.旋转门用电动定位装置.要求和检验方法 |
(Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods.) |
NF P26-320-1997 |
建筑五金.门的配套装置.要求和试验方法(欧洲标准EN 1158) |
(BUILDING HARDWARE. DOOR COORDINATOR DEVICES. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1158).) |
NF P26-320/A1-2003 |
建筑五金.门协调装置.要求和检验方法 |
(Building hardware - Door coordinator devices - Requirements and test methods.) |
NF P26-321-1998 |
建筑五金.弹簧锁.要求和试验方法(欧洲标准EN 1303) |
(BUILDING HARDWARE. CYLINDERS FOR LOCKS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1303).) |
NF P26-322-2002 |
建筑五金.单轴链接件的要求和试验方法. |
(Building hardware - Single-axis hinges - Requirements and tests methods.) |
NF P26-323-1999 |
建筑物五金.门窗螺栓.要求和试验方法 |
(Building hardware - Door and window bolts - Requirements and test methods.) |
NF P26-326-2001 |
建筑五金.挂锁及其配件.要求和试验方法 |
(Building hardware - Padlocks and padlock fittings - Requirements and test methods.) |
NF P26-331-1999 |
建筑五金.电磁铰链.要求和试验方法 |
(BUILDING HARDWARE. ELECTROMAGNETIC HINGES. REQUIREMENTS AND TEST METHODS.) |
NF P26-401-1942 |
五金.地脚 |
(HARDWARE. GROUTING PADS.) |
NF P26-402-1942 |
五金.角钢 |
(HARDWARE. SQUARES.) |
NF P26-405M-1978 |
五金.建筑用小五金.双面锁.特性 |
(BUILDING HARDWARE. TWO WAY LOCKS. CHARACTERISTICS.) |
NF P26-409-1995 |
建筑用五金.135号立式插锁 |
(Building hardware. Simple 135 vertical mortice fitted locks.) |
NF P26-411M-1970 |
五金.有色金属把手和附件.特性 |
() |
NF P26-412-1989 |
五金.建筑物用锁.试验技术 |
(Hardware. Building locks. Testing procedure.) |
NF P26-414-1995 |
建筑用五金.“CHUBB“型或带有汽缸的简单150号配有安全锁的立式插锁 |
(Building hardware. Simple 150 vertical mortice fitted safety locks, type “chubb“ or with cylinders.) |
NF P26-422-1949 |
五金.扣锁螺栓 |
(HARDWARE. PADLOCK EYE.) |
NF P26-427-1998 |
建筑物五金.滑门和折叠门五金.要求和试验方法(欧洲标准EN 1527) |
(Building hardware. Hardware for sliding doors and folding doors. Requirements and test methods.) |
NF P26-433-1998 |
建筑五金.防腐蚀.要求和试验方法 |
(Building hardware. Corrosion resistance. Requirements and test methods.) |
NF P28-001-1990 |
轻型面墙.定义.分类.术语 |
(HIGHTWEIGHT FACADES. DEFINITONS. CLASSIFICATION. TERMINOLOGY.) |
NF P28-101-2002 |
幕墙.透气率.性能要求和分类 |
(Curtain walling - Air permeability - Performance requirements and classification.) |
NF P28-102-2000 |
幕墙.空气渗透性.试验方法 |
(Curtain walling - Air permeability - Test method.) |
NF P28-103-2000 |
幕墙.水密性.性能要求和分级 |
(Curtain walling - Watertightness - Performance requirements and classification.) |
NF P28-104-2000 |
幕墙.水密性.静态压力下的试验室试验 |
(Curtain walling - Watertightness - Laboratory test under static pressure.) |
NF P28-106-2002 |
幕墙.不透水性.位点试验 |
(Curtain walling - Watertightness - Site test.) |
NF P28-108-2001 |
幕墙.对风负载的耐性.性能要求 |
(Curtain walling - Resistance to wind load - Performance requirements.) |
NF P28-114-2000 |
幕墙.对风负载的抗性.试验方法 |
(Curtain walling - Resistance to wind load - Test method.) |
NF P30-101-1948 |
屋顶.术语 |
(ROOFING. TERMINOLOGY.) |
NF P30-302-1963 |
屋顶.波形板弯曲破裂试验 |
(ROOFING. GENERAL DETAILS. BEND BREAK TEST OF CORRUGATED SHEET.) |
NF P30-303-1998 |
建筑物覆盖物.纤维混凝土屋顶挤压胶合板密封带材.规范.试验 |
(Building covering. Extruded mastic sealing strips for fibre-cement roofing. Specifications. Tests.) |
NF P30-305-1995 |
屋顶.金属屋顶用挤压胶粘水泥密封片.规范.试验 |
(BUILDING COVERING. EXTRUDED MASTIC SEALING STRIPS FOR METALLIC ROOFING. SPECIFICATIONS. TEST.) |
NF P31-201-1-1993 |
建筑工程.空心砖屋顶.第1部分:技术规范 |
(DTU 40-22. BUILDING WORKS. ROOF-COVERING MADE FROM HOLLOW TERRACOTTA TILES. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P31-201-1/A1-1996 |
DTU 40.22补充件1 |
() |
NF P31-201-1/A2-1999 |
DTU 40.22补充件2 |
() |
NF P31-201-1/A3-2001 |
DTU 40.22.建筑工程.空心砖屋顶.第1部分:技术规范 |
(DTU 40.22 - Building works - Roof covering made from hollow terracotta tiles - Part 1 : technical specifications.) |