标准号 |
中文名称 |
英文名称 |
NF E38-115-3-1997 |
带电驱动压缩机的空调器,液体冷却设备和热力泵.暖气.第3部分:工业用水加热用设备标志的检验和要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 3 : testing and requirements for marking for sanitary hot water units.) |
NF E38-115-4-1997 |
带电驱动压缩机的空调器,液体冷却设备和热力泵.暖气.第4部分:工业用水加热及室内暖气用设备的要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 4 : requirements for space heating and sanitary hot water units.) |
NF E38-321-1997 |
热交换器.功率测定检验用的概念和一般规定 |
(Heat exchangers. Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers.) |
NF E38-325-2000 |
热交换器.强制对流式空气制冷压缩机.性能形成的试验过程 |
(Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance.) |
NF E38-325/A1-2003 |
热交换器.强制对流空气冷却制冷剂凝结器.性能确定的试验程序 |
(Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance.) |
NF E38-326/A1-2003 |
热交换器.制冷用强制对流装置空气冷却器性能确定的试验程序 |
(Heat exchangers - Test procedure for establishing the performance of forced convection unit air coolers for refrigeration.) |
NF E38-328/A1-2003 |
热交换器.液体冷却制冷剂凝结器.性能确定的试验程序 |
(Heat exchangers - Liquid cooled refrigerant condensors - Test procedures for establishing the performance.) |
NF E38-329/A1-2003 |
热交换器.制冷剂冷却的液体冷却器.性能确定的试验程序 |
(Heat exchangers - Refrigerant cooled liquid coolers - Test procedure for establishing the performance.) |
NF E38-330/A1-2003 |
热交换器.强制循环空气冷却器和空气加热器.性能确定的试验程序 |
(Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance.) |
NF E38-331-1998 |
热交换器.区域供暖用水换热器.确定性能数据的试验程序 |
(Heat exchangers - Water to water heat exchangers for district heating - test procedures for establishing the performance data.) |
NF E38-350-1995 |
热交换.动力装置冷却器的热力学性能检验方法 |
(HEAT EXCHANGERS. VERIFICATION METHODS FOR THERMODYNAMIC PERFORMANCE OF POWER PLANT CONDENSERS.) |
NF E38-351-1995 |
热交换.热性能状态的释放能力和试验方法.烘干机-过热装置 |
(HEAT EXCHANGERS. TEST METHODS AND DELIVERY ACCEPTANCE CONDITIONS OF THERMAL PERFORMANCES. DRIER-SUPERHEATER UNITS.) |
NF E38-420-1993 |
冷却塔.术语 |
(COOLING TOWERS. TERMINOLOGY.) |
NF E38-423-1993 |
自然通风湿冷却塔.热性能,液压性能和声学性能的试验方法和验收条件 |
(NATURAL DRAFT WET COOLING TOWERS. TEST METHODS AND ACCEPTANCE CONDITIONS FOR THE THERMAL, HYDRAULIC AND ACOUSTIC PERFORMANCES.) |
NF E39-001-1998 |
地区供热.冷水和热水传输分配网络.术语 |
(District heating. Hot or cold water transport and distribution networks. Terminology.) |
NF E39-010-2003 |
直接加热的预绝缘粘结管系统的设计和安装 |
(Design, and installation of preinsulated bonded pipes systems for district heating.) |
NF E39-011-2003 |
区域供暖管道.直埋式热水供暖网用预隔热连接的管道系统.聚氨酯热绝缘和聚乙烯外覆层的用户钢管组件 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene) |
NF E39-012-2003 |
区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外护层的入户钢管用接头组件 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies for steel service pipes, polyurethane thermal insulation and outer casing of polye) |
NF E39-013-2003 |
区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外覆层进宅钢管用钢阀门组件 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of pol) |
NF E39-014-2003 |
区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外覆层的进宅钢管用接合组件 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of poluethyl) |
NF E44-003-2000 |
液体泵.泵和设施的一般术语.定义,数量,字母符号和件 |
(Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units.) |
NF E44-051-2001 |
液体泵.安全要求.静液压试验过程 |
(Liquid pumps - Safety requirements - Procedure for hydrostatic testing.) |
NF E44-052-1986 |
泵.标记 |
(PUMPS. MARKING.) |
NF E44-090-1998 |
液压泵和液压泵组件.一般安全要求 |
(Pumps and pump units for liquids. Common safety requirements.) |
NF E44-125-1995 |
侧槽泵.PN40.公称负荷值.主要尺寸.命名系统 |
(SIDE CHANEL PUMPS PN 40. NOMINAL DUTY POINT, MAIN DIMENSIONS, DESIGNATION SYSTEM. (EUROPEAN STANDARD EN 734).) |
NF E44-145-1988 |
转子动力泵.法兰盘受力和力矩.卧轴离心泵和混流量 |
(ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. HORIZONTAL SHAFT CENTRIFUGAL AND MIXED FLOW PUMPS.) |
NF E44-146-1988 |
旋转泵.法兰力和力矩.垂直轴离心泵.混流泵和轴流泵 |
(ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. VERTICAL SHAFT CENTRIFUGAL,MIXED FLOW AND AXIAL PUMPS.) |
NF E44-151-2002 |
离心泵的技术规范.2类 |
(Technical specifications for centrifugal pumps - Class II.) |
NF E44-152-1998 |
离心泵的技术规范.1类 |
(TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS 1. (EUROPEAN STANDARD EN ISO 9905).) |
NF E44-154-1998 |
离心泵机械规范.三级 |
(TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS III. (EUROPEAN STANDARD EN ISO 9908).) |
NF E44-160-2003 |
无密封旋转动力泵.II级.规范 |
(Seal-less rotodynamic pumps - Class II - Specification.) |
NF E44-165-1990 |
工业泵.离心泵、混流泵和轴流泵.允许的机械振动级 |
(Industrial pumps. Centrifugal, mixed flow and axial pumps. Allowable level for mechanical vibrations.) |
NF E44-170-2001 |
机械密封.主要尺寸、名称与符号、材料编码 |
(Mechanical seals - Principal dimensions, designation and material codes.) |
NF E44-190-1975 |
泵.装配和安装规范 |
(PUMPS-INSTRUCTIONS FOR MOUNTING AND INSTALLATION.) |
NF E44-201-1984 |
泵.收敛和辐射连接规则 |
(PUMPS. RECOMMENDATIONS FOR CONNECTING BY CONVERGENT AND DIVERGENT SECTIONS.) |
NF E44-221-1976 |
泵.连接器安装时轴端的距离 |
(PUMPS. SHAFT END SPACING FOR COUPLING MOUNTING.) |
NF E44-290-1975 |
泵.带或不带插件的连接器.用途和安装 |
(PUMPS-COUPLINGS WITH OR WITHOUT SPACING PART-PURPOSE AND MOUNTING.) |
NF E44-301-1984 |
泵.切削液.规范 |
(PUMPS FOR CUTTING OILS. SPECIFICATIONS.) |
NF E44-351-1987 |
流量测定泵.洁净水补充处理电能计量泵.试验方法 |
(DISPLACEMENT PUMPS. ELECTRICALLY DRIVEN PROPORTIONING PUMPS FOR WASTE WATER TREATMENT. TESTS.) |
NF E44-361-1999 |
旋转变容泵.技术要求 |
(ROTARY POSITIVE DISPLACEMENT PUMPS. TECHNICAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14847).) |
NF E44-362-2003 |
往复式容积泵和泵装置.技术要求 |
(Reciprocating positive displacement pumps and pumps units - Technical requirements.) |
NF E44-401-2000 |
旋转动力泵.液压性能验收试验.等级1和2 |
(Rotodynamic pumps - Hydraulic perforamnce acceptance tests - Grades and 2.) |
NF E44-420-2000 |
液体泵和泵部件.噪音试验规程.2级或3级精度 |
(Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy.) |
NF E44-501-1991 |
小功率液压涡轮机.平台试验 |
(LOW POWER HYDRAULIC TURBINES. TESTS ON TEST RIG.) |
NF E44-502-1991 |
小功率水力涡轮机.现场验收试验 |
(SMALL POWER HYDRAULIC TURBINES. FIELD ACCEPTANCE TEST.) |
NF E48-001-1995 |
液压传动.160bar单双杆液压缸.内径32-160mm.量规系列.设计和互换尺寸 |
(Hydraulic fuid power. 160 bar single and double-rod cylinders, bore 32 to 160 mm. French former series. Designation and interchangeability dimensions.) |
NF E48-010-1984 |
液压传动.千斤顶.塞杆端部用内螺纹普通定位销和支座 |
(Hydraulic fluid power. Cylinder. Fork yoke and tenon for extremity of piston rod.) |
NF E48-015-2001 |
液力传动.16MPa(160bar)系列单杆液压缸装配尺寸.第1部分:中型系列 |
(Hydraulic fluid power - Mounting dimensions for single rot cylinders, 16 MPa (160 bar) series - Part 1 : medium series.) |
NF E48-016-2001 |
液力传动.16MPa(160bar)系列单杆液压缸装配尺寸.第2部分:小型系列 |
(Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2 : compact series.) |
NF E48-019-2003 |
流体动力系统和件.油缸内径和活塞杆直径.米制系列 |
(Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series.) |
NF E48-025-1987 |
液压传动.250巴千斤顶.单杆.内径50到500mm.标牌和互换性尺寸 |
(Hydraulic fluid power. 250 bar single-rod cylinders. Bore from 50 to 500 mm.) |
NF E48-030-2001 |
液动系统和件.液压缸.装配尺寸和装配类型的识别标志 |
(Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types.) |
NF E48-031-1998 |
液压气动.圆柱缸.标识 |
(Hydraulic fluid power. Cylinders. Designation.) |
NF E48-032-2002 |
液力传动.液压缸.验收试验 |
(Hydraulic fluid power - Cylinders - Acceptance tests.) |
NF E48-034-1990 |
液压传动.液压缸.小摩擦力活塞杆的密封壳.尺寸 |
(Hydraulic fluid power. Cylinders. Seal housing for low-friction rods. Dimensions.) |
NF E48-036-1984 |
液压传动.千斤顶.铸铁活塞环和活塞室公差和尺寸 |
(HYDRAULIC FLUID POWER. CYLINDER. DIMENSIONS AND TOLERANCES OF CAST IRON PISTON RINGS AND OF THEIR HOUSINGS.) |
NF E48-039-1987 |
液压传动.千斤顶.活塞导向环密封垫圈连接槽.尺寸 |
(Hydraulic fluid power. Cylinders. Seal-incorporating bearing ring housing for pistons. Dimensions.) |
NF E48-041-1995 |
液体流体动力.多数边缘包装装置.手柄高度的测量方法 |
(Hydraulic fluid power. Multiple lip packing sets. Methods for measuring stock heights.) |
NF E48-050-1-1994 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内具有O形环的油口 |
(Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 1 : ports with O-ring seal in truncated housing.) |
NF E48-050-2-1994 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第2部分:重载(S系列)螺柱端头.尺寸 |
(Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 2 : heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.) |
NF E48-050-3-1994 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸 |
(Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 3 : light-duty (L series) stud ends. Dimensions, design, test methods and requirements.) |
NF E48-051-1992 |
液压传动.进气口上的步进管螺纹接头.接头尺寸 |
(Hydraulic fluid power. Pipe threaded connections for supply ports. Connecting dimensions.) |
NF E48-052-1992 |
液压传动.液压缸.缸筒和活塞杆截面比 |
(Hydraulic fluid power. Cylinders. Bore and rod area ratios.) |
NF E48-055-1-2003 |
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘联接器.第1部分:压力为3.5MPa至35MPa(35bar至350ba |
(Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1 : flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN) |
NF E48-055-1986 |
液压传动.法兰盘和银插入凸缘的矩形法兰和装置,公称压力250和400.尺寸 |
(Hydraulic fluid power. Rectangular flanges with recessed flange head. PN 250 and PN 400. Dimensions.) |
NF E48-055-2-2003 |
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘联接器.第2部分:压力为35MPa至40MPa(350bar至400ba |
(Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2 : flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN) |
NF E48-056-2001 |
液压动力.在压力为20MPa(200bar)至压力为31,5MPa(315bar)使用的面对流型,快反应耦合型 |
(Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications.) |
NF E48-057-1-2001 |
液压动力和一般用连接件.诊断用途的液压耦合件.第1部分:非压力连接耦合 |
(Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1 : coupling not for connection under pressure.) |
NF E48-057-2-2001 |
液压动力和一般用连接件.诊断用途的液压耦合件.第2部分:压力连接的M16X2末端的耦合 |
(Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2 : coupling with M16 X 2 end for connection under pressure.) |
NF E48-058-1-2001 |
液压动力.快速反应耦合.第1部分:尺寸和要求 |
(Hydraulic fluid power - Quick-action couplings - Part 1 : dimensions and requirements.) |
NF E48-058-2-2001 |
液压动力.快速反应耦合.第2部分:试验方法 |
(Hydraulic fluid power - Quick-action couplings - Part 2 : test methods.) |
NF E48-059-1991 |
液压和气压传动.起重器.活塞冲程的基本序列 |
(Fluid power systems and components. Cylinders. Basic series of piston strokes.) |
NF E48-060-1992 |
液压和气压传动.千斤顶.活塞杆的端头.螺纹:尺寸和类型 |
(Fluid power. Cylinders. Piston rod thread dimensions and types.) |
NF E48-064-1998 |
液压传动和一般用金属导管的连接.第1部分:24喇叭形压合接头 |
(Metallic tube connections for fluid power and general use. Part 1 : 24 degrees compression fittings.) |
NF E48-064-4-2000 |
液压动力和一般应用的金属管连接.第4部分:由O型环焊接的24芯连接 |
(Metallic tube connections for fluid power and general use - Part 4 : 24 o cone connectors with O-ring weld-on nipples.) |
NF E48-065-1-2000 |
一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第1部分:螺纹孔 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports.) |
NF E48-065-2-2000 |
一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带弹性体密封的 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2 : stud ends with elastomeric sealing (type E).) |
NF E48-065-3-2000 |
一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带金属对金属密 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B).) |
NF E48-080-1989 |
液压和气压传动.连接软管.词汇 |
(Fluid power. Hose assemblies. Vocabulary.) |
NF E48-087-1993 |
线增强橡胶和塑料软管和组件.挠性水压脉冲试验 |
(RUBBER AND PLASTICS HOSE AND ASSEMBLIES WITH WIRE REINFORCEMENTS. HYDRAULIC IMPULSE TEST WITH FLEXING. (EUROPEAN STANDARD EN 26802).) |
NF E48-088-1999 |
橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验) |
(Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).) |
NF E48-100-2000 |
液压传动系统和件.标称压力 |
(Fluid power systems and components - Nominal pressures.) |
NF E48-101-1984 |
液压传动.泵,发动机和变速器.量值的定义和用作符号的字母 |
(Hydraulic fluid power. Pumps, motors and integral transmissions. Parameter definitions and letter symbols.) |
NF E48-120-1993 |
软钎剂的试验方法.第14部分:钎焊剂残留物粘度的测定 |
(FLUID POWER. PRESSURES DEFINITIONS.) |
NF E48-151-2000 |
液压传动.带分离器的气压蓄能器.压力和容量范围、性能数据 |
(Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities.) |
NF E48-152-1996 |
液压传动.气压蓄能器.气孔尺寸 |
(Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports.) |
NF E48-153-1999 |
液压传动.带隔板的气载蓄能器.优先液压端口的选择 |
(HYDRAULIC POWER. GAS-LOADED ACCUMULATORS WITH SEPARATOR. SELECTION OF PREFERRED HYDRAULIC PORTS.) |
NF E48-202-1996 |
机械安全.液力系统和部件的安全要求.液压装置(欧洲标准EN 982) |
(SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. HYDRAULICS. (EUROPEAN STANDARD EN 982).) |
NF E48-351-1974 |
液压传动系统.系统和件的整理和包装规则 |
(HYDRAULIC FLUID POWER SYSTEMS.RULES FOR CONDITIONING AND PACKING SYSTEMS AND COMPONENTS) |
NF E48-353-2002 |
液力传动.活塞泵和电动机的安装法兰盘和轴端用尺寸及识别码.第2部分:米制系列 |
(Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series.) |
NF E48-354-1989 |
液压传动.容积泵和容积汽缸功率的测定 |
(HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.) |
NF E48-361-1992 |
液压传动.变量或定量汽缸发动机.控制规范 |
(HYDRAULIC FLUID POWER. FIXED AND VARIABLE DISPLACEMENT MOTORS. SPECIFICATION WITH ODER.) |
NF E48-372-1997 |
旋转轴唇型密封件.第2部分:词汇 |
(Rotary shaft lip type seals. Part 2 : vocabulary.) |
NF E48-381-2002 |
液压传动.马达特性的测定.第1部分:在恒低速和恒压力下的测定 |
(Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure.) |
NF E48-382-2002 |
液压传动.马达特性的测定.第2部分:起动性 |
(Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability.) |
NF E48-384-1992 |
液压动力.固定式活塞泵.由于AC级细粒粉尘污染引起的流动降缓.试验方法 |
(HYDRAULIC FLUID POWER. FIXED DISPLACEMENT PUMPS. FLOW DEGRADATION DUE TO CLASSIFIED AC FINE TEST DUST CONTAMINANT. TEST METHOD.) |
NF E48-386-1992 |
气压液力传动.气载噪声级测定试验规程.第1部分:泵 |
(HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 1 : PUMPS.) |
NF E48-387-1992 |
气压液力传动.气载噪声级测定试验规程.第2部分:电动机 |
(HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 2 : MOTORS.) |
NF E48-388-1992 |
气压液力传动.气载噪声级测定试验规程.第3部分:泵.平行六面传声器阵列方法 |
(HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 3 : PUMPS. METHOD USING A PARALLELEPIPED MICROPHONE ARRAY.) |
NF E48-390-1997 |
液压传动.在系统和件中对产生压力波动等级的测定.第1部分:泵精确度法 |
(HYDRAULIC FLUID POWER. DETERMINATION OF PRESSURE RIPPLE LEVELS GENERATED IN SYSTEMS AND COMPONENTS. PART 1 : PRECISION METHOD FOR PUMP.) |
NF E48-391-2000 |
液压动力.系统和件内产生的压力波动水平的测定.泵用简化方法 |
(Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps.) |
NF E48-392-1-2002 |
液压传动.件和系统中液载噪音特性的测定.第1部分:绪论 |
(Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1 : introduction.) |
NF E48-392-2-2001 |
液压传动.件和系统中液载噪音特性的测定.第2部分:管道液流中声音速度的测量 |
(Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe.) |
NF E48-393-2001 |
液力传动.系统和件中产生的压力波动等级的测定.第3部分:电动机法 |
(Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3 : method for motors.) |
NF E48-400-1996 |
液压传动.阀门装配面及盒式阀腔的识别标志 |
(HYDRAULIC FLUID POWER. CODE FOR IDENTIFICATION OF VALVE MOUNTING SURFACES AND CARTRIDGE VALVE CAVITIES.) |
NF E48-411-1995 |
流体动力系统和件.与地面接触的三极电插头.特性和要求 |
(Fluid power systems and components. Three-pin electrical plug connectors with earth contact. Characteristics and requirements.) |
NF E48-412-1995 |
液压系统和件.带接地的双脚电插头.特性和要求 |
(Fluid power systems and components. Two-pin electrical plug connectors with earth contact. Characteristics and requirements.) |
NF E48-423-2001 |
液压传动.减压阀、顺序阀、卸载阀、节流阀和止回阀.装配面 |
(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.) |
NF E48-432-1993 |
液压动力.4和5阀口伺服阀.安装面 |
(HYDRAULIC FLUID POWER. POUR- AND FIVE-PORTS SERVOVALVES. MOUNTING SURFACES.) |
NF E48-435-1998 |
液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸 |
(Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.) |
NF E48-501-1994 |
液压传动.160bar中型系列和250bar气缸.附件安装尺寸 |
(Hydraulic fluid power. Cylinders, 160 bar medium series and 250 bar. Mouting dimensions for accessories.) |
NF E48-503-1987 |
液压传动.千斤顶.160bar小型A千斤顶活塞杆端头的球头销定 |
(HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.) |
NF E48-505-1988 |
液压传动.160巴小型系列液压缸.B型V形撑架 |
(HYDRAULIC FLUID POWER. CYLINDER 160 BAR COMPACT SERIE. CLEVIS BRACKET FORM B.) |
NF E48-550-1998 |
液压传动系统.O型环遮蔽罩.旋转轴或扩孔器遮蔽罩的设计 |
(Fluid power systems. O-ring housings. Design of housing for static assemblies in shaft or bore.) |
NF E48-560-1997 |
液压驱动系统.环行垫圈罩.轴向装配设计 |
(FLUID POWER SYSTEMS. O-RING HOUSINGS. AXIAL ASSEMBLY DESIGNS.) |
NF E48-602-1982 |
润滑油,工业油和相关产品.L级.分类.H系列液压系统 |
(LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS. CLASS L. CLASSIFICATION. FAMILLE H. “HYDRAULIC SYSTEM“.) |
NF E48-612-1973 |
液压传动用流体.A和C级难燃流体pH值的测定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF PH VALUES OF FIRE-RESISTANT FLUIDS,FORMS A AND C) |
NF E48-613-1973 |
液压传动用流体.D级难燃流体蒸汽压力的测定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF VAPOUR PRESSUREOF FIRE-RESISTANT FLUIDS,FORM D) |
NF E48-614-1973 |
液压传动用流体.难燃流体脱气能力测定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF DEAERATION ABILITY OF FIRE-RESISTANT FLUIDS) |
NF E48-615-1973 |
液压传动用流体.A和B级难燃流体乳化稳定性测定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS,FORMS A AND B) |