标准号 |
中文名称 |
英文名称 |
NF C93-7661-1996 |
NF C93-766-94补充件1 |
() |
NF C93-767-1994 |
印制电路用基材.第2部分:规范.第17号规范:多层印制板制作用的规定易燃性的聚酰亚胺编织玻璃纤维织物覆铜层 |
(Base materials for printed circuits. Part 2 : specifications. Specification number 17 : thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed board.) |
NF C93-767/A1-1996 |
NF EN 60249-2-17-1994的修改1 |
() |
NF C93-767/A2-2001 |
印制电路用基材.第2部分:规范.第17号规范:多层印制板制作用规定易燃性的薄铜涂覆聚酰亚胺层压玻璃布板 |
(Base materials for printed circuits. Part 2 : specifications - Specification number 17 : thin polyimide oven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication) |
NF C93-7671-1996 |
NF C93-767-94补充件1和2 |
() |
NF C93-768-1994 |
印制电路用基材.第2部分:规范.第18号规范:规定易燃性的比斯玛勒米德(bismaleimide)/三嗪改良型环氧化合物编 |
(Base materials for printed circuits. Part 2 : specifications. Specification number 18 : bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).) |
NF C93-768/A1-1996 |
NF EN 60249-2-18-1994的修改1 |
() |
NF C93-768/A2-2001 |
印制电路用基材.第2部分:规范.第18号规范.规定易燃性的带双马来酰亚胺三嗪的铜涂覆改良性环氧化物层压玻璃 |
(Base materials for printed circuits. Part 2 : specifications - Specification number 18 : bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability () |
NF C93-7681-1996 |
NF C93-768-94补充件1和2 |
() |
NF C93-769-1994 |
印制电路用基材.第2部分:规范.第19号规范:多层印制板制作用的规定易燃性的bismaleimide/三嗪改良型环氧化物 |
() |
NF C93-769/A1-1996 |
NF EN 60249-2-19-1994的修改1 |
() |
NF C93-7691-1996 |
NF C93-769-94补充件1和2 |
() |
NF C93-770-3-3-2002 |
印制板和其它互连结构用材料.第3-3部分:包被和非包被的非增强基材(用于挠性印制板)的分规范集.粘着的涂覆挠 |
(Materials for printed boards and other interconnecting structures - Part 3-3 : sectional specification set for unreinforced base materials, clad and unclad (intented for flexible printed boards) - Adh) |
NF C93-770-3-4-2002 |
印制板和其它互连结构用材料.第3-4部分:包被和非包被的非增强基材(用于挠性印制板)的分规范集.粘着的涂覆挠 |
(Materials for printed boards and other interconnecting structures - Part 3-4 : sectional specification set for unreinforced base materials, clad and unclad (intented for flexible printed boards) - Adh) |
NF C93-770-3-5-2002 |
印制板和其它互连结构用材料.第3-5部分:包被和非包被的非增强基材(用于挠性印制板)的分规范集.转换粘性薄膜 |
(Materials for printed boards and other interconnecting structures - Part 3-5 : sectional specification set for unreinforced base materials, clad and unclad (intented for flexible printed boards) - Tra) |
NF C93-771-1996 |
互连结构用材料.第7部分:限制芯材料分规范组.第1节:铜/铁镊合金/镊铜合金 |
(Materials for interconnection structures. Part 7 : sectional specification set for restraining core materials. Section 1 : copper/invar/coper.) |
NF C93-780-2-10-2003 |
印制板和其它互连结构用材料.第2-10部分:包被和非包被增强基材.阻燃型铜包被改良或未改良的氰酸酯溴化环氧 |
() |
NF C93-780-2-12-2002 |
印制板和其它互连结构用材料.第2-12部分:包被和非包被的非增强基材(用于挠性印制板)的分规范集.阻燃型铜包 |
(Materials for printed boards and other interconnecting structures - Part 2-12 : sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of define) |
NF C93-780-2-13-2002 |
印制板和其它互连结构用材料.第2-13部分:包被和非包被的非增强基材(用于挠性印制板)的分规范集.阻燃型铜包 |
(Materials for printed boards and other interconnecting structures - Part 2-13 : sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of) |
NF C93-780-2-18-2002 |
印制板和其它互连结构用材料.第2-18部分:包覆或非包覆增强基材.规定了易燃性的覆铜非编织玻璃纤维增强层压 |
(Materials for printed boards and other interconnecting structures - Part 2-18 : reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flamma) |
NF C93-780-2-19-2002 |
印制板和其它互连结构用材料.第2-19部分:被包和非包被增强基材料.规定燃烧性的环氧交叉帘布层线性纤维玻璃 |
(Materials for printed boards and other interconnecting structures - Part 2-19 : reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of define) |
NF C93-780-2-4-2002 |
印制板和其它互连结构用材料.第2-4部分:包覆和非包覆增强基材.规定了易燃性的覆铜聚酯非编织/编织玻璃纤维 |
(Materials for printed boards and other interconnecting structures - Part 2-4 : reinforced base materials clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability) |
NF C93-780-2-7-2002 |
印制板和其它互连结构用材料.第2-7部分:涂覆和非涂覆增强基材.规定了易燃性的环氧编织E型玻璃纤维层压覆铜 |
(Materials for printed boards and other interconnecting structures - Part 2-7 : reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burni) |
NF C93-781-1996 |
连接结构用材料.第5部分:带和不带涂层的导电箔和薄膜的分规范.第1节:铜箔(用于生产铜涂覆基材) |
(Materials for interconnection structures. Part 5 : sectional specification set for conductive foils and films with and without coatings. Section 1 : copper foils (for the manufacture of copper-clad base materials).) |
NF C93-784-1997 |
互连结构用材料.第5部分:有或无涂覆的导电箔和膜的分规范组.第4节:导电油墨 |
(Materials for interconnection structures. Part 5 : sectional specification set for conductive foils and films with or without coatings. Section 4 : conductive inks.) |
NF C93-791-1996 |
印制板.电子数据的描述和传送.第791部分:裸板数字格式电试验信息 |
(Printed boards. Electronic data description and transfer. Part 7 : bare board electric test information in digital form.) |
NF C93-800-1999 |
纤维光学传感器.第1部分:总规范 |
(Fibre optic sensors. Part 1 : generic specification.) |
NF C93-801-1-2001 |
光纤系统用半导体光电器件.第1部分:基本额定值及特性 |
(Semiconductor optoelectronic devices for fibre optic system applications - Part 1 : essential ratings and characteristics.) |
NF C93-801-2-2001 |
光纤系统用半导体光电器件.第2部分:测量方法 |
(Semiconductor optoelectronic devices for fibre optic system applications - Part 1 : measuring methods.) |
NF C93-802-1-1998 |
光纤放大器.第1部分:总规范 |
(Optical fibre amplifiers. Part 1 : generic specification.) |
NF C93-802-2-2001 |
光纤放大器.第2部分:数字设施.性能规范模板 |
(Optical fibre amplifiers - Part 2 : digital applications - Performance specification template.) |
NF C93-802-4-2003 |
光纤放大器.第4部分:多信道应用.性能规范模板 |
(Optical amplifiers - Part 4 : multichannel applications - Performance specification template.) |
NF C93-802-5-2-2003 |
光学放大器.第5-2部分:合格鉴定规范.光纤放大器可靠性合格鉴定 |
(Optical amplifiers - Part 5-2 : qualification specifications - Reliability qualification for optical fibre amplifiers.) |
NF C93-803-1997 |
光纤功率仪校正 |
(Calibration of fibre optic power meters.) |
NF C93-805-1-1-1998 |
光纤增强器.基本规范.第1-1部分:获取参数的试验方法.光学光谱分析器 |
(Optical fibre amplifiers. Basic specification. Part 1-1 : test methods for gain parameters. Optical spectrum analyzer.) |
NF C93-805-1-2-1998 |
光纤增强器.基本规范.第1-2部分:获取参数的试验方法.电子光谱分析器 |
(Optical fibre amplifiers. Basic specification. Part 1-2 : test methods for gain parameters. Electrical spectrum analyzer.) |
NF C93-805-1-3-1998 |
光纤增强器.基本规范.第1-3部分:获取参数的试验方法.光电测量表 |
(Optical fibre amplifiers. Basic specification. Part 1-3 : test methods for gain parameters. Optical power meter.) |
NF C93-805-10-1-2003 |
光学放大器.试验方法.第10-1部分:多道参数.使用光学开关和光谱分析仪的脉冲法 |
(Optical amplifiers - Test methods - Part 10-1 : multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer.) |
NF C93-805-10-2-2003 |
光学放大器.试验方法.第10-2部分:多道参数.使用选通光频谱分析仪的脉冲法 |
(Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.) |
NF C93-805-10-3-2003 |
光学放大器.试验方法.第10-3部分:多道参数.探测法 |
(Optical amplifiers - Test methods - Part 10-3 : multichannel parameters - Probe methods.) |
NF C93-805-11-1-2003 |
光学放大器试验方法.第11-1部分:偏振模式分散.琼斯矩阵特征分析法(JME) |
(Optical amplifier test methods - Part 11-1 : polarization mode dispersion - Jones matrix eigenanalysis method (JME).) |
NF C93-805-2-1-1998 |
光纤增强器.基本规范.第2-1部分:光电参数的试验方法.光学光谱分析器 |
(Optical fibre amplifiers. Basic specification. Part 2-1 : test methods for optical power parameters. Optical spectrum analyzer.) |
NF C93-805-2-2-1998 |
光纤放大器.基本规范.第2-2部分:光强度参数的试验方法.电频谱分析器 |
(Optical fibre amplifiers. Basic specification. Part 2-2 : test methods for optical power parameters. Electrical spectrum analyzer.) |
NF C93-805-2-3-1998 |
光纤放大器.基本规范.第2-3部分:光电参数基本试验方法.光电计 |
(Optical fibre amplifiers. Basic specification. Part 2-3 : test methods for optical power parameters. Optical power meter.) |
NF C93-805-3-2-2003 |
光学放大器.第3-2部分:噪音指数参数的试验方法.电频谱分析仪法 |
(Optical amplifiers - Part 3-2 : test methods for noise figure parameters - Electrical spectrum analyser method.) |
NF C93-805-3-2001 |
光纤放大器.基本规范.第3部分:试验方法和噪音图形参数 |
(Optical fibre amplifiers - Basic specification - Part 3 : test methods for noise figure parameters.) |
NF C93-805-5-1-2001 |
光纤放大器.基本规范.第5-1部分:反射参数的试验方法.光谱分析仪 |
(Optical fibre amplifiers - Basic specification - Part 5-1 : test methods for reflectance parameters - Optical spectrum analyser.) |
NF C93-805-5-3-2002 |
光纤放大器.基础规范.第5-3部分:反射参数的试验方法.使用光电谱分析仪的反射公差试验法 |
(Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.) |
NF C93-805-6-1-1998 |
光纤放大器. 基本规范.第6-1部分:泵漏参数的试验方法.光信号分离器 |
(Optical fibre amplifiers. Basic specification. Part 6-1 : test methods for pump leakage parameters. Optical demultiplexer.) |
NF C93-805-7-1-1998 |
光纤放大器. 基本规范.第7-1部分:波谱外插入损失的试验方法.滤过光电计 |
(Optical fibre amplifiers. Basic specification. Part 7-1 : test methods for out-of-band insertion losses. Filtered optical power meter.) |
NF C93-806-1998 |
远程通信用激光模块.可靠性评估 |
(Laser modules used for telecommunication. Reliability assessment.) |
NF C93-807-1-1-1998 |
光纤通信子系统基本试验程序.第1-1部分:一般通信子系统的试验程序.单模式光纤电缆用发射机输出光能的测量 |
(Fibre optic communication subsystem basic test procedures. Part 1-1 : test procedures for general communication subsystems. Transmitter output optical power measurement for single-mode optical fibre cable.) |
NF C93-807-1-3-1999 |
纤维光学通信子系统基本试验程序.第1-3部分:一般通信子系统的试验程序.中心波长和谱宽的测量 |
(Fibre optic communication subsystem basic test procedures. Part 1-3 : test procedures for general communication subsystems. Central wavelength and spectral width measurement.) |
NF C93-807-2-1-1999 |
光纤通信分系统基本试验程序.第2-1部分:数字系统试验程序.接收器灵敏度和过载测量 |
(Fibre optic communication subsystem basic test procedures - Part 2-1 : test procedures for digital systems - Receiver sensitivity and overload measurement.) |
NF C93-807-2-2-1999 |
纤维光学通信子系统基本试验过程.第2-2部分:数字系统试验过程.光学眼孔图,波形和消亡比率 |
(Fibre optic communication subsystem basic test procedures. Part 2-2 : test procedures for digital systems. Optical eye pattern, waveform and extinction ratio.) |
NF C93-807-2-4-1998 |
光纤通信子系统基本试验程序.第2-4部分:数字系统的试验程序.比特速率公差测量 |
(Fibre optic communication subsystem basic test procedures. Part 2-4 : test procedures for digital systems. Bit-rate tolerance measurement.) |
NF C93-807-2-5-1998 |
光纤通信子系统基本试验程序.第2-5部分:数字系统的试验程序.不稳定性传输功能测量 |
(Fibre optic communication subsystem basic test procedures. Part 2-5 : test procedures for digital systems. Jitter transfer function measurement.) |
NF C93-807-2-9-2003 |
光纤通信子系统基本试验程序.第2-9部分:数字系统.密集型波分复用系统光学信噪比的测量 |
(Fibre optic communication subsystem test procedures - Part 2-9 : digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems.) |
NF C93-807-4-2-2000 |
光纤通信子系统基本试验程序.第4-2部分:光缆性能指标.单模光缆性能指标的衰减 |
(Fibre optic communication subsystem basic test procedures - Part 4-2 : Fibre optic cable plant - Single-mode fibre optic cable plant attenuation.) |
NF C93-808-1-1999 |
光纤通信子系统.第1部分:总规范 |
(Fibre optic communication subsystems - Part 1 : generic specification.) |
NF C93-810-1995 |
光纤和光缆用连接器组总规范.第1部分:要求、试验方法和合格认可程序 |
(Generic specification. Connector sets for optical fibres and cables. Part 1 : requirements, tests methods and qualification approval procedures.) |
NF C93-811-1987 |
光导纤维互联装置和无源件.光纤和电缆连接件的分规范.CF03型 |
(FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF03.) |
NF C93-812-1987 |
光导纤维互联装置和无源件.光纤和电缆连接件的分规范.CF04型 |
(FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF04.) |
NF C93-813-1987 |
光导纤维互联装置和无源件.光纤和电缆连接件的分规范.CF05型 |
(FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF05.) |
NF C93-814-1989 |
电子件.光导纤维无源件和连接装置.光学件过渡规范 |
(FIBRE OPTICS INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION FOR MECHANICAL SPLICES.) |
NF C93-815-1995 |
空白详细规范:光纤和光缆连接器.Ⅰ类环境(欧洲标准EN 186001) |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY I. (EUROPEAN STANDARD EN 186001).) |
NF C93-816-1995 |
光纤和光缆连接器空白详细规范.Ⅱ类环境 |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY II. (EUROPEAN STANDARD EN 186002).) |
NF C93-817-1995 |
光纤和光缆连接器空白详细规范.Ⅲ类环境 |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY III. (EUROPEAN STANDARD EN 186003).) |
NF C93-818-1995 |
光纤和光缆连接器空白详细规范.Ⅳ类环境 |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY IV. (EUROPEAN STANDARD EN 186004).) |
NF C93-819-1995 |
光纤和光缆连接器空白详细规范.V类环境 |
(BLANK DETAIL SPECIFICATION. CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY V. (EUROPEAN STANDARD EN 186005).) |
NF C93-820-1995 |
分规范:光纤和光缆用连接装置.CF08型(欧洲标准EN 186210) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE CF08. (EUROPEAN STANDARD EN 186210).) |
NF C93-821-1995 |
分规范.光纤和光缆的连接器件.类型F-SMA(欧洲标准EN 186100) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE F-SMA. (EUROPEAN STANDARD EN 186100).) |
NF C93-822-1995 |
分规范.光纤和光缆的连接器件.类型FC(欧洲标准186110) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE FC. (EUROPEAN STANDARD EN 186110).) |
NF C93-823-1995 |
分规范.光纤和光缆的连接器件.类型LSA |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSA. (EUROPEAN STANDARD EN 186130).) |
NF C93-824-1995 |
分规范.光纤和光缆的连接器件.类型LSB(欧洲标准186180) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSB. (EUROPEAN STANDARD EN 186180).) |
NF C93-825-1995 |
分规范.光纤和光缆的连接器件.类型LSC(欧洲标准186220) |
(Sectional specification. Connector sets for optical fibres and cables. Type lsc.) |
NF C93-826-1995 |
分规范.光纤和光缆的连接器件.类型LSF(欧洲标准186230) |
(Sectional specification. Connector sets for optical fibres and cables. Type lsf.) |
NF C93-827-1-2002 |
光纤附件.第1部分:总规范 |
(Fibre optic enclosures - Part 1 : generic specification.) |
NF C93-828-1997 |
光纤无源部件和电缆组件.第1部分:容量鉴定.总规范 |
(Fibre optic passive components and cable assemblies. Part 1 : capability approval. Generic specification.) |
NF C93-829-1997 |
纤维光学扇形输出器.第1部分:总规范 |
(Fibre optic fan-outs. Part 1 : generic specification.) |
NF C93-830-2001 |
不根据波长选择的光纤分路装置.第1部分:总规范 |
(Non-wavelength-selective fibre optic branching devices - Part 1 : generic specification.) |
NF C93-831-1-1998 |
光纤分路器件.第1-1部分:空白详细规范 |
(Fibre optic branching devices. Part 1-1 : blank detail specification.) |
NF C93-831-1995 |
光纤分路器件的空白详细规范.型号:非波长选择的星形、发射分光离器/连光器 |
(Blank detail specification. Fibre optic branching devices. Type : non wavelength selective transmissive star.) |
NF C93-832-1995 |
光纤分路器件的空白详细规范.型号:非波长选择的星形、多路调制/解调制器 |
(BLANK DETAIL SPECIFICATION. FIBRE OPTIC BRANCHING DEVICES. TYPE : WAVELENGTH SELECTIVE TRANSMISSIVE STAR. (EUROPEAN STANDARD EN 181102).) |
NF C93-833-1-2000 |
光纤和光缆连接器.第1部分:总规范 |
(Connectors for optical fibres and cables - Part 1 : generic specification.) |
NF C93-833-1997 |
光纤和光缆连接器.第19部分:SC-D(uplex)型,光纤连接器的分规范 |
(Connectors for optical fibres and cables. Part 19 : sectional specification for fibre optic connector. Type SC-D(uplex).) |
NF C93-837-1998 |
空白详细规范.光纤分支装置.型.电信应用的非波长选择传送星 |
(BLANK DETAIL SPECIFICATION : FIBRE OPTIC BRANCHING DEVICES. TYPE : NON WAVELENGTH SELECTIVE TRANSMISSIVE STAR FOR TELECOMMUNICATION APPLICATION. (EUROPEAN STANDARD EN 181103).) |
NF C93-838-1998 |
空白详细规范.光纤分支装置.型.电信应用波长选择传送星 |
(BLANK DETAIL SPECIFICATION : FIBRE OPTIC BRANCHING DEVICES. TYPE : WAVELENGTH SELECTIVE TRANSMISSIVE STAR FOR TELECOMMUNICATION APPLICATION. (EUROPEAN STANDARD EN 181104).) |
NF C93-840-1-1-2003 |
光纤.第1-1部分:测量方法和试验程序.总则和指南 |
(Optical fibres - Part 1-1 : measurement methods and test procedures - General and guidance.) |
NF C93-840-1-20-2002 |
光学纤维.第1-20部分:测量方法和试验规程.纤维几何 |
(Optical fibres - Part 1-20 : measurement methods and test procedures - Fibre geometry.) |
NF C93-840-1-21-2002 |
光学纤维.第1-21部分:测量方法和试验规程.镀涂几何 |
(Optical fibres - Part 1-21 : measurement methods and test procedures - Coating geometry.) |
NF C93-840-1-22-2002 |
光学纤维.第1-22部分:测量方法和试验程序.长度测量 |
(Optical fibres - Part 1-22 : measurements methods and test procedures - Length measurement.) |
NF C93-840-1-30-2002 |
光学纤维.第1-30部分:测量方法和试验规程.纤维验证试验 |
(Optical fibres - Part 1-30 : measurement methods and test procedures - Fibre proof test.) |
NF C93-840-1-31-2002 |
光学纤维.第1-31部分:测量方法和试验程序.抗拉强度 |
(Optical fibres - Part 1-31 : measurement methods and test procedures - Tensile strength.) |
NF C93-840-1-33-2002 |
光学纤维.第1-33部分:测量方法和试验规程.应力腐蚀性 |
(Optical fibres - Part 1-33 : measurement methods and test procedures - Stress corrosion susceptibility.) |
NF C93-840-1-34-2002 |
光学纤维.第1-34部分:测量方法和试验程序.纤维卷曲度 |
(Optical fibres - Part 1-34 : measurement methods and test procedures - Fibre curl.) |
NF C93-840-1-41-2002 |
光学纤维.第1-41部分:测量方法和试验程序.带宽度 |
(Optical fibres - Part 1-41 : measurement methods and test procedures - Bandwidth.) |
NF C93-840-1-42-2002 |
光学纤维.第1-42部分:测量方法和试验程序.颜色描述 |
(Optical fibres - Part 1-42 : measurement methods and test procedures - Chromatic dispersion.) |
NF C93-840-1-43-2002 |
光学纤维.第1-43部分:测量方法和试验程序.数字孔径 |
(Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture.) |
NF C93-840-1-44-2002 |
光学纤维.第1-44部分:测量方法和试验程序.截止波长 |
(Optical fibres - Part 1-44 : measurements methods and test procedures - Cut-off wavelength.) |
NF C93-840-1-46-2002 |
光学纤维.第1-46部分:测量方法和试验程序.监测光透射率变化 |
(Optical fibres - Part 1-46 : measurement methods and test procedures - Monitoring of changes in optical transmittance.) |
NF C93-840-1-47-2002 |
光学纤维.第1-47部分:测量方法和试验程序.微弯曲损耗 |
(Optical fibres - Part 1-47 : measurement methods and test procedures - Macrobending loss.) |
NF C93-840-1-50-2002 |
光学纤维.第1-50部分:测量方法和试验规程.湿热(稳态) |
(Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state).) |
NF C93-840-1-51-2002 |
光学纤维.第1-51部分:测量方法和试验程序.干热 |
(Optical fibres - Part 1-51 : measurement methods and test procedures - Dry heat.) |
NF C93-840-1-52-2002 |
光学纤维.第1-52部分:测量方法和试验程序.温度变化 |
(Optical fibres - Part 1-52 : measurement methods and test procedures - Change of temperature.) |
NF C93-840-1-53-2002 |
光学纤维.第1-53部分:测量方法和试验程序.水浸湿 |
(Optical fibres - Part 1-53 : measurement methods and test procedures - Water immersion.) |
NF C93-840-1987 |
电子件.光导纤维过渡总规范 |
(ELECTRONIC COMPONENTS. GENERIC SPECIFICATION FOR OPTICAL FIBRES.) |
NF C93-841-1989 |
光导纤维过渡规范 |
(SECTIONAL SPECIFICATION FOR OPTICAL FIBRES.) |
NF C93-841-2-10-2002 |
光纤.第2-10部分:产品规范.A1类多模光纤分规范 |
(Optical fibres - Part 2-10 : product specifications - Sectional specification for category A1 multimode fibres.) |
NF C93-841-2-20-2002 |
光纤.第2-20部分:产品规范.A2类多模光纤分规范 |
(Optical fibres - Part 2-20 : product specifications - Sectional specification for category A2 multimode fibres.) |
NF C93-841-2-30-2002 |
光纤.第2-30部分:产品规范.A3类多模光纤分规范 |
(Optical fibres - Part 2-30 : product specifications - Sectional specification for category A3 multimode fibres.) |
NF C93-841-2-40-2002 |
光纤.第2-40部分:产品规范.A4类多模光纤分规范 |
(Optical fibres - Part 2-40 : product specifications - Sectional specification for category A4 multimode fibres.) |
NF C93-841-2-50-2002 |
光纤.第2-50部分:产品规范.B类单模光纤分规范 |
(Optical fibres - Part 2-50 : product specifications - Sectional specification for class B single-mode fibres.) |
NF C93-842-1992 |
电信领域用光纤的产品规范 |
(Product specification for optical fibres used in the telecom field.) |
NF C93-850-1-1-2002 |
光学纤维电缆.第1-1部分:总规范.总则 |
(Optical fibre cables - Part 1-1 : generic specification - General.) |
NF C93-850-1-2-2000 |
光纤电缆.第1-2部分:总规范.基本光缆试验过程 |
(Optical fibre cables - Part 1-2 : generic specification - Basic optical cable test procedures.) |
NF C93-850-1-2/A1-2003 |
光缆.第1-2部分:总规范.光缆基本试验程序 |
(Optical fibre cables - Part 1-2 : generic specificaiton - Basic optical cable test procedures.) |
NF C93-850-2-10-2003 |
光学纤维电缆.第2-10部分:室内光缆.单股光缆和双股光缆的系列规范 |
(Optical fibre cables - Part 2-10 : indoor cables - Family specification for simplex and duplex cables.) |
NF C93-850-2-20-2003 |
光学纤维电缆.第2-20部分:室内光缆.多纤配电光缆的系列规范 |
(Optical fibre cables - Part 2-20 : indoor cables - Family specification for multi-fibre optical distribution cables.) |
NF C93-850-2-2003 |
光学纤维电缆.第2部分:室内光缆.分规范 |
(Optical fibre cables - Part 2 : indoor cables - Sectional specification.) |