标准号 |
中文名称 |
英文名称 |
| NF C18-313/A1-1997 |
NF EN 61243-1-1997的修改1 |
() |
| NF C18-3131-1997 |
NF C18-313-1997的补充件1 |
() |
| NF C18-314-2-2001 |
带电作业.电压检测器.第2部分:1kV-36kV交流电压检测器用电阻类型 |
(Live working - Voltage detectors - Part 2 : resistive type to be used for voltages of 1 kV to 36 kV a.c.) |
| NF C18-314-2/A2-2003 |
带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻类型 |
(Live working - Voltage detectors - Part 2 : resistive type to be used for voltages of 1 kV to 36 kV a.c.) |
| NF C18-315-2000 |
带电作业.电压检测器.第3部分:双极低压检测器 |
(Live working - Voltage detectors - Part 3 : two-pole low-voltage type.) |
| NF C18-400-1994 |
在交流电1000V和直流电1500V的情况下带电作业用的手工工具 |
(Hand tools for live working up to 1000 A.C. And 1500 V D.C.) |
| NF C18-400/A1-1996 |
NF EN 60900-1994 修改件 1 |
() |
| NF C18-400/A11-1997 |
NF EN 60900-1994的修改件11 |
() |
| NF C18-400/A2-2003 |
交流1000V和直流1500V以下带电作业用手持工具 |
(Hand tools for live working up to 1 000 V a.c. and 1 500 V d.c.) |
| NF C18-4001-1996 |
NF C 18-400-1994的补充件1 |
() |
| NF C18-40011-1997 |
NF C 18-400-1994的补充件11 |
() |
| NF C18-401-1997 |
带电作业用填充绝缘泡沫管和实心棒 |
(Insulating foam-filled tubes and solid rods for live working.) |
| NF C18-402-1996 |
带电作业用绝缘棒和万能工具配件 |
(Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working.) |
| NF C18-403-2002 |
带电作业.工具,设备和器械术语 |
(Live working - Terminology for tools, equipment and devices.) |
| NF C18-404-1993 |
带电作业用的绝缘材料袖套 |
(Sleeves of insulating material for live working.) |
| NF C18-404/A1-2003 |
带电作业用绝缘袖套 |
(Sleeves of insulating material for live working.) |
| NF C18-404/A11-1997 |
NF EN 60984-1993的修改件1 |
() |
| NF C18-40411-1997 |
NF C18-404的补充件11 |
() |
| NF C18-405-1996 |
在标称交流电压达到800KV时带电作业用的导电衣 |
(Conductive clothing for live working at a nominal voltage up to 800 kV a.c.) |
| NF C18-406-1996 |
带电作业.电工用绝缘空心管 |
(Live working. Insulating hollows tubes for electrical purposes.) |
| NF C18-415-1993 |
带电作业用的绝缘材料手套和连指手套规范 |
(Specification for gloves and mitts of insulating material for live working.) |
| NF C18-415/A11-1997 |
NF EN 60903-1993的修改件11 |
() |
| NF C18-41511-1997 |
1993年NF C 18-415的补充件11 |
() |
| NF C18-420-1972 |
以天然橡胶或合成橡胶为基础的绝缘垫 |
(INSULATING MATS MADE FROM NATURAL RUBBER OR SYNTHETIC ELASTOMER.) |
| NF C18-426-1996 |
交流设备上带电作业用硬质保护罩 |
(Rigid protective covers for live working on A.C. Installations.) |
| NF C18-426/A1-2003 |
交流设备上带电作业用硬质保护罩 |
(Rigid protective covers for live working on a.c. installations.) |
| NF C18-426/A2-2003 |
交流设备上带电作业用硬质保护罩 |
(Rigid protective covers for live working on a.c. installations.) |
| NF C18-431-1996 |
带电作业用滑动座架、电杆夹及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working.) |
| NF C18-437-1997 |
电工机械保护用手套和连指手套 |
(GLOVES AND MITTS WITH MECHANICAL PROTECTION FOR ELECTRICAL PURPOSES. (EUROPEAN STANDARD EN 50 237).) |
| NF C18-440-2002 |
液压电缆切割装置.标称电压高达交流30KV的电气设施用设备 |
(Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV.) |
| NF C18-445-1994 |
带电作业.接地或用矛状物作为短路装置的接地和短路设备.矛式接地 |
(Live working. Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device. Lance earthing.) |
| NF C18-446-1996 |
带电作业.便携式接地或接地短路设备 |
(Live working. Portable equipment for earthing or earthing and short-circuiting.) |
| NF C18-446/A11-2001 |
带电作业.接地用便携式设备或接地和短路 |
(Live working - Portable equipment for earthing or earthing and short-circuiting.) |
| NF C18-450-1994 |
带电作业用带绝缘杆的天线设备 |
(Aerial devices with insulating boom used for live working exceeding 1 kv A.C.) |
| NF C18-465-2002 |
在低压设备中使用的电绝缘头盔 |
(Electrically insulating helmets for use on low voltage intallations.) |
| NF C18-478-2002 |
带电作业.绝缘材料作成的梯子 |
(Live working - Ladders of insulating material.) |
| NF C18-479-2001 |
带电作业.绝缘材料用柔性导线外壳(软管) |
(Live working - Flexible conductor covers (line hoses) of insulating material.) |
| NF C18-479/A1-2003 |
带电作业.绝缘材料的柔性导体封盖物 |
(Live working - Flexible conductor covers (line hoses) of insulating material.) |
| NF C18-481-2001 |
带电作业.交流电压为1KV至36KV的便携式相位比较器 |
(Live working - Portable phase comparators for voltages of 1 kV to 36 kV a.c.) |
| NF C18-481/A1-2003 |
带电作业.1kV至36kV交流电压用小型相位比较器 |
(Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.) |
| NF C18-501-1997 |
电气设备的操作 |
(Operation of electrical installations.) |
| NF C18-502-1997 |
电气设备的操作 |
(Operation of electrical installations (national annexes).) |
| NF C20-000/A1-1993 |
NF C 20-000-1990 修改1 |
() |
| NF C20-0001-1993 |
NF C 20-000-1990的补充件1 |
() |
| NF C20-001-1995 |
环境条件的分类.第1部分:环境参数及其严密性 |
(Classification of environmental conditions. Part 1 : environmental parameters and their severities.) |
| NF C20-001/A2-1995 |
NF EN 60721-1-1995的修改件 A2 |
() |
| NF C20-0012-1995 |
NF C20-001-95补充件2 |
() |
| NF C20-003-0-1993 |
环境条件分类.第3部分:环境参数及其严酷度组的分类.介绍 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Introduction.) |
| NF C20-003-1-1997 |
环境条件分类.第3部分:环境参数及其严酷度组的分类.第1节:存储 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 1 : storage.) |
| NF C20-003-2-1997 |
环境条件分类.第3部分:环境参数及其严酷度组的分类.第2节:运输 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 2 : transportation.) |
| NF C20-003-3-1995 |
环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第3节:气候防护场所用固定装置 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 3 : stationary use at weatherprotected locations.) |
| NF C20-003-3/A2-1997 |
NF EN 60721-3-3-1995的修改2 |
() |
| NF C20-003-4-1995 |
环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第4节:在无天气防护固定位置使用的产品 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 4 : stationary use at non-weatherprotected locations.) |
| NF C20-003-4/A1-1997 |
NF EN 60721-3-4-1995的修改1 |
() |
| NF C20-003-41-1997 |
NF C 20-003-4-1997的补充件1 |
() |
| NF C20-003-5-1997 |
环境条件分类.第3部分:环境参数及其严酷度组的分类.第5节:地面车辆装置 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 5 : ground vehicle installations.) |
| NF C20-003-6-1993 |
环境条件的分类.第3部分:环境参数及其严密性的组别分类.船舶环境 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Ship environment.) |
| NF C20-003-6/A2-1997 |
NF EN 60721-3-6-1993的修改2 |
() |
| NF C20-003-62-1997 |
NF C 20-003-6-1993的补充件2 |
() |
| NF C20-003-7-1995 |
环境条件分类.第3部分:环境参数组及其严重程度分类.第7节:便携式和不固定使用的产品 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 7 : portable and non-stationary use.) |
| NF C20-003-7/A1-1997 |
NF EN 60721-3-7-1995的修改件 A1 |
() |
| NF C20-003-71-1997 |
NF C 20-003-7-1995的补充件1 |
() |
| NF C20-003-9-1993 |
环境条件分类.第3部分:环境参数组及其严酷程度分类.第9节:产品中的小气候 |
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 9 : microclimats inside products.) |
| NF C20-003-9/A1-1995 |
NF EN 60721-3-9-1993的修改1 |
() |
| NF C20-003-91-1995 |
NF C20-003-9-93补充件1 |
() |
| NF C20-010-1992 |
外壳防护等级(1P代码) |
(Degrees of protection provided by enclosures (IP Code).) |
| NF C20-010/A1-2000 |
外壳的保护程度 |
(Degrees of protection provided by enclosures (IP Code).) |
| NF C20-013-1998 |
防护罩对人员和设备的保护.检验探针 |
(Protection of persons and equipment by enclosures. Probes for verification.) |
| NF C20-015-1995 |
电工设备外部自动碰撞的密封用提供保护的级别 |
(Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (ik code).) |
| NF C20-015/A1-1999 |
NF EN 50102-1995的修改件A1 |
() |
| NF C20-0151-1999 |
1995年NF C 20-015的补充件1 |
() |
| NF C20-030-2002 |
电击防护.装置和设备的通用概念 |
(Protection against electric shock - Common aspects for installation and equipment.) |
| NF C20-030/AM1-1977 |
低压电气设备.电击防护.安全要求 |
(LOW-VOLTAGE ELECTRICAL EQUIPMENT.PROTECTION AGAINST ELECTRIC SHOCK.SAFETY REQUIREMENTS.) |
| NF C20-030M1-1977 |
低压电气设备.对电击的防护.安全要求 |
(LOW-VOLTAGE ELECTRICAL EQUIPMENT.PROTECTION AGAINST ELECTRIC SHOCK.SAFETY REQUIREMENTS.) |
| NF C20-040-1-2003 |
低压系统内设备的绝缘配合.第1部分:原理、要求和试验 |
(Insulation coordination for equipment within low-voltage systems - Part 1 : principles, requirements and tests.) |
| NF C20-040-3-2003 |
低压系统内设备的绝缘配合.第3部分:防污染用涂覆、封装或模压的使用 |
(Insulation coordination for equipment within low-voltage systems - Part : use of coating, potting or moulding for protection against pollution.) |
| NF C20-070-2003 |
人-机接口、标记和识别用基本和安全原则.指示器和激励器的编码原则 |
(Basic and safety principles for man-machine interface, marking and indentification - Coding principles for indicators and actuators.) |
| NF C20-090-1994 |
人-机界面.操作规则 |
(Man-machine interface (mmi). Actuating principles.) |
| NF C20-110-1970 |
铜导线绝缘连接端子.规则 |
(INSULATED TERMINALS FOR COPPER CONDUCTORS. REQUIREMENTS.) |
| NF C20-115-1971 |
标定截面不超过2.5mm**2，线芯无特殊预加工的硬铜导线连接的无螺钉接线端 |
(TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF THE CONDUCTOR.) |
| NF C20-116-1981 |
室外铜导线用螺钉丝端子 |
(Terminals with screw campling for external copper conductors.) |
| NF C20-120-1968 |
28-47-5和6.3mm夹子用的簧片 |
(TAB TERMINALS FOR SNAP-ON CONNECTOR ASSEMBLIES DIMENSIONS OF TABS: 2.8,4.7,5 AND 6.3 MM.) |
| NF C20-130-1987 |
铜导线用铜或铜合金镶装式裸套管.规则 |
(Crimp-type copper or copper alloy non-insulated lugs for copper conductors. Requirements.) |
| NF C20-130/A1-1989 |
NF C 20-130-1987的补充件1 |
() |
| NF C20-1301-1989 |
C 20-130-87的修改1 |
() |
| NF C20-131-1974 |
铝导线用带导电镀层的有铝片或铜片的接头.规则和尺寸 |
(LUGS WITH COPPER OR ALUMINIUM FLATS AND WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.) |
| NF C20-150-1988 |
护板与框架的尺寸 |
(Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 1 : panels and racks.) |
| NF C20-151-1988 |
根据NFC20-150：护板与框架的尺寸.一般用柜的尺寸为4826毫米 |
(Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 2 : cabinets and pitches of rack structures.) |
| NF C20-152-1988 |
482.6mm(79英寸)系列的机箱.尺寸.第三部分:箱和相连嵌入部件 |
(Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 3 : subracks and associated plug-in units.) |
| NF C20-153-1992 |
制订电子设备插箱插件的模数等级 |
(MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. (EUROPEAN STANDARD EN 60 917).) |
| NF C20-154-1996 |
电子设备操作规程的机械结构开发的模数等级.第2部分:分规范.25MM的设备接口配置尺寸 |
(Modular order for the development of mechanical structures for electronic equipment practices. Part 2 : sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice.) |
| NF C20-300-1-1994 |
可靠性管理.第1部分:可靠性程序管理 |
(Dependability management. Part 1 : dependability programme management.) |
| NF C20-300-2-1996 |
可靠性管理.第2部分:可靠性程序素和任务 |
(Dependability management. Part 2 : dependability programme elements and tasks.) |
| NF C20-341-1994 |
可靠性分析技术.可靠性方块图法 |
(Analysis techniques for dependability. Reliability block diagram method.) |
| NF C20-343-1998 |
电子部件.可靠性.换算用失效速度和应力模型的参考条件 |
(Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion.) |
| NF C20-344-2002 |
可靠性、有效性、完好性和持续支持术语的数学表达式 |
(Mathematical expressions for reliability, availability, maintainability and maintenance support terms.) |
| NF C20-401-1999 |
环境试验.第3部分:背景信息.第1节:冷和干热试验 |
(Environment testing. Part 3 : background information. Section 1 : cold and dry heat tests.) |
| NF C20-402-1996 |
环境试验.第4部分:技术规范编制者用信息.试验汇总表 |
(Environmental testing. Part 4 : information for specification writers. Test summaries.) |
| NF C20-403-2-1999 |
环境试验.第3部分:背景信息.第2节:结合温度和低气压的试验 |
(Environmental testing. Part 3 : background information. Section 2 : combined temperature/low air pressure tests.) |
| NF C20-403-4-2002 |
环境测试.第3-4部分: 支持文件和指南.湿热术语 |
(Environmental testing - Part 3-4 : supporting documentation and guidance - Damp heat tests.) |
| NF C20-403-5-2002 |
环境试验.第3-5部分:配套文献和导则.温度室功能的确定 |
(Environmental testing - Part 3-5 : supporting documentation and guidance - Confirmation of the performance of temperature chambers.) |
| NF C20-403-6-2002 |
环境试验.第3-6部分:配套文献和导则.温度/潮湿室功能的确认 |
(Environmental testing - Part 3-6 : supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers.) |
| NF C20-403-7-2002 |
环境试验.第3-7部分:配套文献和指南.试验A和B用温度室的测量(加载) |
(Environmental testing - Part 3-7 : supporting documentation and guidance - Measurements in temperature chambers for tests A and test B (with load).) |
| NF C20-409-2000 |
环境测试.第5部分: 试验方法起草指南.术语和定义 |
(Environmental testing - Part 5 : guide to drafting of test methods - Terms and definitions.) |
| NF C20-420-1994 |
环境试验.第3部分:导则;设备的地震试验方法 |
(Environmental testing. Part 3 : guidance seismic test methods for equipments.) |
| NF C20-454-1984 |
气候和机械试验.火的状态 |
(Basic environmental testing procedures. Test methods. Fire behaviour. Analysis and titrations of gases evolved during pyrolysis or combustion of materials used in electrotechnics. Exposure to abnormal heat or fire. Tube furnace method.) |
| NF C20-700-1995 |
环境试验.第1部分:通用导则 |
(Environmental testing. Part 1 : general and guidance.) |
| NF C20-701-1993 |
环境试验.第2部分:试验.试验A:冷试验 |
(Environmental testing. Part 2 : tests. Tests A : cold.) |
| NF C20-701/A1-1993 |
环境试验.第2部分:试验.试验A:低温 |
(Environmental testing. Part 2 : tests. Tests A : cold.) |
| NF C20-701/A2-1995 |
环境试验.第2部分:试验.试验A:低温 |
(Environmental testing. Part 2 : tests. Tests A : cold.) |
| NF C20-7011-1993 |
NF C20-701补充件1 |
() |
| NF C20-7012-1995 |
NF C20-701-93补充件2 |
() |
| NF C20-702-1993 |
基本环境试验规程.第2部分:试验B:干热. |
(Basic environmental testing procedures. Part 2 : tests B : dry heat.) |
| NF C20-702/A1-1993 |
NF EN 60068-2-1993的修改1 |
() |
| NF C20-702/A2-1995 |
基本环境试验规程.第2部分:试验B:干热 |
(Basic environmental testing procedures. Part 2 : tests B : dry heat.) |
| NF C20-7021-1993 |
气侯的基本试验和机械坚固耐用的试验.试验方法.干热.修改件1 |
() |
| NF C20-7022-1995 |
NF C20-702-93补充件2 |
() |
| NF C20-703-1986 |
气侯的基本试验和机械坚固耐用的试验.试验方法.Ca试验.湿热的连续试验 |
(Basic environmental testing procedures. Test methods. Test Ca : damp heat, steady state.) |
| NF C20-705-2000 |
环境试验.第2部分:试验.试验Sa:在地平面模拟太阳辐射 |
(Environmental testing - Part 2 : tests - Test Sa : simulated solar radiation at ground level.) |
| NF C20-706-1995 |
基本环境试验规程.第2部分:试验.第6节:试验Fc:振动(正弦波) |
(Environmental testing. Part 2 : tests. Tests fc : vibration (sinusoidal).) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com