标准号 |
中文名称 |
英文名称 |
| NF A91-477-2000 |
金属的防腐蚀.经清洗和没有清洗的铝及铝合金上的铬酸盐转化涂层 |
(Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys.) |
| NF A91-501-1991 |
金属用磷盐转化涂层.技术规定 |
(Phosphate conversion coatings for metals. Method of specifying requirements.) |
| NF A91-701-1999 |
表面处理.工厂水箱,管道和设备的识别.安全标志 |
(Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.) |
| NF A92-020-1990 |
铝和铝合金用的搪瓷涂层.试样的制备 |
(VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM ALLOYS. PREPARATION OF TEST SAMPLES.) |
| NF A92-021-1990 |
铝和铝合金用的搪瓷涂层.附着力试验 |
(VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM LLOYS. ADHESION TESTS.) |
| NF A92-030-1991 |
搪瓷.连续擦清洗用的自洁搪瓷制品的特性 |
(VITREOUS AND PORCELAIN ENAMELS. CHARACTERISTICS OF CONTINUOUSLY SELF-CLEANING ENAMELS.) |
| NF A92-031-1994 |
釉瓷和搪瓷.高温分解自洁搪瓷的特性 |
(VITREOUS AND PROCELAIN ENAMELS. CHARACTERISTICS OF THE PYROLITIC SELF-CLEANING ENAMELS.) |
| NF A92-032-1998 |
釉瓷和搪瓷.易清洗搪瓷的特性 |
(VITREOUS AND PORCELAIN ENAMELS. CHARACTERISTICS OF EASILY CLEANABLE ENAMELS.) |
| NF A92-060-1994 |
釉瓷和搪瓷.建筑用搪瓷对钢板的涂覆特性 |
(VITREOUS AND PORCELAIN ENAMELS. CHARACTERISTICS OF THE ENAMELS APPLIED TO STEEL PANELS INTENTED FOR ARCHITECTURE.) |
| NF A92-101-1993 |
搪瓷.室温下耐柠檬酸的测定 |
(VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF RESISTANCE TO CITRIC ACID AT ROOM TEMPERATURE.) |
| NF A92-102-1993 |
钢板用搪瓷.试验用试样的制备 |
(VITREOUS AND PORCELAIN ENAMELS FOR SHEET STEEL. PRODUCTION OF SPECIMENS FOR TESTING.) |
| NF A92-103-1989 |
用于铸铁的釉瓷和搪瓷.试验试件的制造 |
(VITREOUS AND PORCELAIN ENAMELS FOR CAST IRON. PRODUCTION OF SPECIMENS FOR TESTING.) |
| NF A92-104-1989 |
搪瓷.用酸性或中性液体和水蒸汽的试验用器具 |
(VITREOUS AND PORCELAIN ENAMELS. APPARATUS FOR TESTING WITH ACID AND NEUTRAL LIQUIDS AND THEIR VAPOURS.) |
| NF A92-105-1989 |
搪瓷.用碱性液体的试验用器具 |
(VITREOUS AND PORCELAIN ENAMELS. APPARATUS FOR TESTING WITH ALKALINE LIQUIDS.) |
| NF A92-106-1989 |
搪瓷.抗沸腾柠檬酸的测定 |
(VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF RESISTANCE TO BOILING CITRIC ACID.) |
| NF A92-107-1989 |
搪瓷.耐盐酸蒸气冷凝的测定 |
(VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF RESISTANCE TO CONDENSING HYDROCHLORIC ACID VAPOUR.) |
| NF A92-108-1989 |
搪瓷.耐沸水和水蒸气的测定 |
(VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF RESISTANCE TO BOILING WATER AND WATER VAPOUR.) |
| NF A92-109-1989 |
搪瓷.耐热氢氧化钠的测定 |
(VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF RESISTANCE TO HOT SODIUM HYDROXIDE.) |
| NF A92-110-1993 |
搪瓷.强烈腐蚀条件下使用的搪瓷器皿.高压试验 |
(VITREOUS AND PORCELAIN ENAMELS. ENAMELLED ARTICLES FOR SERVICE UNDER HIGHLY CORROSIVE CONDITIONS. HIGH VOLTAGE TEST.) |
| NF A92-112-1989 |
搪瓷上釉涂层的制品.耐热性能的测定 |
(VITREOUS AND PORCELAIN ENAMELLED MANUFACTURED ARTICLES. DETERMINATION OF RESISTANCE TO HEAT.) |
| NF A92-113-1989 |
搪瓷.耐洗涤纺织物用热洗涤剂溶液性能的测定 |
(VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF RESISTANCE TO HOT DETERGENT SOLUTIONS USED FOR WASHING TESXTILES.) |
| NF A92-115-2001 |
釉瓷和搪瓷.检测和确定缺陷位置的低电压试验 |
(Vitreous and porcelain enamels - Low voltage test for detecting and locating defects.) |
| NF A92-116-1998 |
搪瓷.室温下抗硫酸的测定 |
(Vitreous and porcelain enamels. Determination of resistance to sulfuric acid at room temperature.) |
| NF A92-117-1989 |
釉瓷和搪瓷.自洁性能的试验方法 |
(VITREOUS AND PORCELAIN ENAMELS. METHOD OF TEST OF SELF-CLEANINGPROPERTIES.) |
| NF A92-118-1993 |
搪瓷.搪瓷器皿耐碰撞测定.焊接工具试验 |
(VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF THE RESISTANCE OF ENAMELLED ARTICLES TO IMPACT. PISTOL TEST.) |
| NF A92-119-2001 |
釉瓷和搪瓷.搪瓷涂层耐划痕性的测定 |
(Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes.) |
| NF A92-801-1-2003 |
高级工业陶瓷.陶瓷覆层的试验方法.第1部分:用接触式探针轮廓测定仪测定覆层厚度 |
(Advanced technical ceramics - Methods of test for ceramic coatings - Part 1 : determination of coating thickness by contact probe filometer.) |
| NF A92-801-2-2003 |
高级工程陶瓷.陶瓷覆层的试验方法.第2部分:用环形研磨法测定覆层厚度 |
(Advanced technical ceramics - Methods of test for ceramic coatings - Part 2 : determination of coating thickness by the crater grinding method.) |
| NF A95-001-2000 |
粉末冶金.词汇 |
(Powder metallurgy - Vocabulary.) |
| NF A95-113-2002 |
金属粉末.用校准漏斗(霍尔流量计)测定流动时间 |
(Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter).) |
| NF A95-116-1980 |
粉末冶金.金属粉末.用震动漏斗法测定表视密度 |
(POWDER METALLURGY. METALLIC POWDERS. DETERMINATION OF APPARENT DENSITY BY OSCILLATING FUNNEL METHOD.) |
| NF A95-121-2002 |
金属粉末(不包括硬质合金粉末).单轴向压缩时压塑性(压缩性)的测定 |
(Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression.) |
| NF A95-311-1977 |
粉末冶金.透气烧结金属材料.密度和开气孔率的测定 |
(POWDER METALLURGY. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY AND OPEN POROSITY.) |
| NF A95-312-1971 |
粉末冶金.多孔烧结制品中.油含量的测定 |
(POWDER METALLURGY. DETERMINATION OF THE OIL CONTENT OF POROUS SINTERED PRODUCTS.) |
| NF A95-322-2000 |
硬金属除外的烧结金属材料.拉伸试验块 |
(Sintered metal materials, excluding hardmetals - Tensile test pieces.) |
| NF A95-323/A1-2003 |
不包括硬质合金的烧结金属材料.横向断裂强度的测定.修改件1:精确说明 |
(Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 : precision statement.) |
| NF A95-325-1998 |
烧结金属衬套.径向抗压强度的测定 |
(Sintered metal bushes. Determination of radial crushing strength.) |
| NF A95-326-1993 |
除硬金属外的烧结金属材料.无缺口试件 |
(Sintered metal materials, excluding hardmetals. Unnotched impact test piece.) |
| NF A95-327-1986 |
粉末冶金.硬金属除外的烧结金属材料.疲劳试验用试件 |
(Powder metallurgy. Sintered metal materials excluding hardmetals. Fatigue test pieces.) |
| NF A95-329-1986 |
粉末冶金.硬金属除外的烧结金属材料.维氏显微硬度的测定 |
(POWDER METALLURGY. SINTERED METAL MATERIALS EXCLUDING HARDMETALS. MEASUREMENT OF VICKERS MICROHARDNESS.) |
| NF A95-342-1985 |
粉末冶金.包括硬金属在内的烧结金属材料.显微照相检查技术 |
(POWDER METALLURGY. SINTERED MATERIALS INCLUDING HARDMETALS. MICROGRAPHIC EXAMINATION TECHNIQUES.) |
| NF A95-381-1983 |
粉末烧结.除硬金属以外的烧结钢和烧结合金钢.总碳量和非结合碳量的测定 |
(Powder metallurgy. Sintered steels and alloys excluding hardmetals. Determination of total carbon and non-combined carbon contents.) |
| NF A95-401-1993 |
烧结硬金属.取样和试验 |
(Sintered hardmetals. Sampling and testing.) |
| NF A95-402-1993 |
硬金属.烧结试件所用粉末的取样和试验 |
(Hardmetals. Sampling and testing of powders using sintered test pieces.) |
| NF A95-421-1983 |
粉末冶金.硬质合金.洛氏硬度试验(A标试验方法) |
(Powder metallurgy. Hardmetals. Rockwell hardness test (A-scale-test method).) |
| NF A95-422-1993 |
硬金属.维氏硬度试验 |
(Hardmetals. Vickers hardness test.) |
| NF A95-424-1993 |
硬金属.单轴向压测定 |
(Hardmetals. Compression test.) |
| NF A95-432-1971 |
粉末冶金.硬金属.饱和磁化强度的测定 |
(POWDER METALLURGY. HARD METALS. DETERMINATION OF SPECIFIC SATURATION MAGNETIZATION.) |
| NF A95-490-1993 |
硬质合金.用X射线荧光法测定金属素的含量.溶解法 |
(HARDMETALS. DETERMINATION OF CONTENTS OF METALLIC ELEMENTS BY X-RAY FLUORESCENCE. SOLUTION METHOD. (EUROPEAN STANDARD EN 24883).) |
| NF A95-492-1-1993 |
硬质合金.火焰原子吸收光谱法的化学分析.第1部分:一般要求 |
(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 1 : general requirements.) |
| NF A95-492-2-1993 |
硬质合金.火焰原子吸收光谱法的化学分析.第2部分:含量为0.001%-0.02%(m/m)的钙、钾、镁和钠的测定 |
(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 2 : determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 per cent (m/m).) |
| NF A95-492-3-1993 |
硬质合金.火焰原子吸收光谱法的化学分析.第3部分:含量为0.01%-0.5%(m/m)的钴、铁、锰和镍的测定 |
(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 3 : determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 per cent (m/m).) |
| NF A95-492-4-1993 |
硬质合金.火焰原子吸收光谱法的化学分析.第4部分:含量为0.01%-0.5%(m/m)的钼、钛和钒的测定 |
(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 4 : determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 per cent (m/m).) |
| NF A95-492-5-1993 |
硬质合金.火焰原子吸收光谱法的化学分析.第5部分:含量为0.5%-2%(m/m)的钴、铁、锰、钼、镍、钛和钒的测定 |
(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 5 : determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 per cent (m/m).) |
| NF A95-492-6-1993 |
硬质合金.火焰原子吸收光谱法进行化学分析.第6部分:含量为0.01%-2%(m/m)的铬的测定 |
(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 6 : determination of chromium in contents from 0,01 to 2 per cent (m/m).) |
| NF A95-701-1977 |
粉末冶金.机械零部件自润滑轴承用金属与合金.规范和试验方法的说明 |
(POWDER METALLURGY.METALS AND ALLOYS FOR MECHANICAL PARTS SELF-LUBRICATING BEARINGS. INTERPRETATION OF SPECIFICATIONS AND TEST METHODS.) |
| NF A95-711-1977 |
粉末冶金.机械部件和自润滑轴承用的合金.钢号一般命名规则 |
(POWDER METALLURGY. ALLOYS FOR MECHANICAL PARTS AND SELF-LUBRICATING BEARINGS. RULES FOR THE CONVETIONAL DESIGNATION OF GRADES.) |
| NF A95-725-1971 |
粉末冶金.机械部件用合金.渗透性钢的规范 |
(POWDER METALLURGY. REQUIREMENTS FOR INFILTRATED STEELS.) |
| NF A95-731-1971 |
粉末冶金.机械部件用合金.烧结青铜的规范 |
(POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRONZES.) |
| NF A95-732-1971 |
粉末冶金.机械部件用合金.烧结黄铜的规范 |
(POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRASS.) |
| NF A95-771-1-1988 |
烧结金属材料.规范.第1部分:用液体润滑剂浸渍的轴承材料 |
(Sintered metal materials. Specifications. Part 1 : materials, for bearings, impregnated with liquid lubricant.) |
| NF B10-0013-1978 |
采石和挖掘产品.石灰石 |
(QUARRY PRODUCTS. LIMESTONES.) |
| NF B10-202-1978 |
大理石.定货的一般条件和规范 |
(MARBLE. SPECIFICATIONS AND GENERAL CONDITIONS FOR TRANSACTIONS.) |
| NF B10-504-1973 |
采石场产品.石灰石.吸水系数的测量 |
(QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF THE COEFFICIENT OF WATER ABSORPTION.) |
| NF B10-505-1973 |
采石场产品.石灰石.声传播速度的测量(纵波) |
(QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF THE SPEED OF SOUND PROPAGATION (LONGITUDINAL WAVES).) |
| NF B10-506-1973 |
采石场产品.石灰石.表面硬度的测量(条纹的宽度) |
(QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF SURFACE HARDNESS. (GROOVE WIDTH).) |
| NF B10-507-1973 |
采石场产品.石灰石.维氏硬度的测量 |
(QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF VICKERS HARDNESS.) |
| NF B10-508-1973 |
采石场产品.石灰石.金属盘磨损试验 |
(QUARRY PRODUCTS. LIMESTONES. ABRASION TEST USING A METAL DISC.) |
| NF B10-511-1975 |
石灰石.动力弹性模量的试验 |
(LIMESTONE - TEST FOR DYNAMIC MODULUS OF ELASTICITY.) |
| NF B10-512-1975 |
石灰石.临界水分的测定 |
(LIMESTONE - MEASUREMENT OF CRITICAL WATER CONTENT -) |
| NF B10-513-1991 |
采石场产品.天然石.抗冻裂试验 |
(Quarry products. Natural stones. Frost resistance test.) |
| NF B10-613-1999 |
天然石材的试验方法.毛细管现象测定吸水系数 |
(Natural stone test methods. Determination of water absorption coefficient by capillarity.) |
| NF B10-614-1999 |
天然石材的试验方法.抗压强度测定 |
(Natural stone test methods. Determination of compressive strength.) |
| NF B10-615-1999 |
天然石材的试验方法.实密度、表观密度、总孔隙度和开口孔隙率的测定 |
(Natural stone test methods. Determination of real density and apparent density, and of total and open porosity.) |
| NF B10-619-1999 |
天然石材的试验方法.耐盐结晶化的测定 |
(Natural stone test methods. Determination of resistance to salt crystallisation.) |
| NF B10-620-2003 |
天然石料试验方法.抗冻性 |
(Natural stone test methods - Determination of frost resistance.) |
| NF B10-621-1999 |
天然石材的试验方法.集中负荷下弯曲强度的测定 |
(Natural stone test methods. Determination of flexural strength under concentrated load.) |
| NF B10-622-2000 |
天然石的试验方法.岩相检验 |
(Natural stone test methods - Petrographic examination.) |
| NF B10-623-2000 |
天然石.确定标准 |
(Natural stone - Denomination criteria.) |
| NF B10-624-2003 |
天然石料.术语 |
(Natural stone - Terminology.) |
| NF B10-625-2003 |
天然石料试验方法.恒定瞬间抗弯强度的测定 |
(Natural stone test methods - Determination of flexural strengh under constant moment.) |
| NF B10-626-2002 |
天然石料试验方法.在榫钉孔处断裂荷载的测定 |
(Natural stone test methods - Determination of the breaking load at a dowel hole.) |
| NF B10-628-2003 |
天然石料试验方法.大气压下吸水性的测定 |
(Natural stone test methods - Determination of water absorption at atmospheric pressure.) |
| NF B10-630-2003 |
天然石料的测试方法.用热冲击测定耐老化能力 |
(Natural stones test methods - Determination of resistance to ageing by thermal shock.) |
| NF B10-636-2003 |
天然石料试验方法.用摆动测试仪测定防滑性能 |
(Natural stone test methods - Determination of the slip resistance by means of the pendulum tester.) |
| NF B12-300-1987 |
B12生石膏和熟石膏石膏.综合.一般要求和条件 |
(Gypsum and plaster. Plasters. General specification and conditions.) |
| NF B12-301-1987 |
建筑用石膏和灰泥粉.标定的和超硬度内装修用灰泥粉的分类,命名和规范 |
(Gypsum and plaster. Plasters for normal and extra hard internal finishes, hand or machine applied. Classification, designation, specifications.) |
| NF B12-302-1982 |
石膏.麻刀石膏 |
(Staff gypsum.) |
| NF B12-401-1987 |
石膏.试验技术 |
(Gypsum and plaster. Plasters. Test methods.) |
| NF B13-001-1977 |
天然沥青块、粉末和细粉 |
(RAW,CRUSHED AND GRINDED NATURAL ROCK ASPHALTS.) |
| NF B20-001-1988 |
矿物纤维绝缘产品.词汇 |
(Mineral fiber based insulating products. Vocabulary.) |
| NF B20-002-1983 |
矿物纤维绝缘产品.取样要求 |
(MINERAL FIBER BASED INSULATION PRODUCTS. SAMPLING REQUIREMENTS.) |
| NF B20-101-1983 |
矿物纤维绝缘产品.矿毡、垫子和矿棉板.厚度的常规测量 |
(MINERAL FIBRE BASED INSULATING PRODUCTS. MINERAL WOOLFELTS,MATTRESSES AND PANELS. CONVENTIONAL MEASURE OF THICKNESS.) |
| NF B20-104-1985 |
矿物纤维绝缘产品.矿毡、垫子和矿棉板.透气性的测定 |
(MINERAL BASED INSULATING PRODUCTS. MINERAL WOOLFELTS,MATTRESSES AND PANELS. DETERMINATION OF AIR PERMEABILITY.) |
| NF B20-105-1984 |
矿物纤维绝缘垫子和矿棉板表面密度的测定方法 |
(METHOD OF DETERMINING THE SURFACE MASS OF MINERAL FIBRE INSULATION MATS AND PANELS.) |
| NF B20-106-1984 |
矿物纤维绝缘产品.粘聚力测定用等速垂直牵引时产品表面的扩展试验 |
(MINERAL FIBER BASED INSULATED PRODUCTS. EXTENSION TEST PERPENDICULARY TO THE SURFACES OF THE PRODUCTS AT CONSTANT VELOCITY TO DETERMINE THE COHESION.) |
| NF B20-109-1985 |
矿物纤维绝缘产品.矿毡、垫子和矿棉板.分类 |
(MINERAL BASED INSULATING PRODUCTS. MINERAL WOOLFELTS,MATTRESSES AND PANELS. CLASSIFICATION.) |
| NF B30-004-1974 |
玻璃.水晶、晶体和声学玻璃 |
(GLASS.CRYSTAL,CRYSTAL GLASS,CRYSTALLIN.) |
| NF B30-010-1967 |
玻璃.与玻璃粘度有关的特征温度的词汇 |
(GLASS. VOCABULARY OF CHARACTERISTIC TEMPERATURES RELATED TO GLASS VISCOSITIES.) |
| NF B30-101-1967 |
玻璃.双层玻璃试样的弯曲试验 |
(GLASS. BEND TEST OF A DUAL-GLASS TEST SPECIMEN.) |
| NF B30-102-1968 |
玻璃.软化温度的测定.(LITTLETON点) |
(GLASS. DETERMINATION OF SOFTENING POINT. (LITTLETON POINT).) |
| NF B30-103-1968 |
玻璃.线性膨胀平均系数的测定.(直接法) |
(GLASS. DETERMINATION OF MEAN COEFFICIENT OF LINEAR EXPANSION (DIRECT METHOD).) |
| NF B30-104-1968 |
玻璃.热焊双层嵌内式密封玻璃的研究.(光弹性法) |
(GLASS. ANALYSIS OF SEALS OF TWO GLASSES OBTAINED BY HOT WELDING. (PHOTO-ELASTICIMETRIC METHOD).) |
| NF B30-105-1972 |
玻璃.玻璃的退火温度和应力温度的测定 |
(DETERMINATION OF ANNEALING POINT AND STRAIN POINT OF GLASS.) |
| NF B30-106-1986 |
玻璃.玻璃晶粒在98℃时的耐水解性.试验方法和分类 |
(Glass. Hydrolytic resistance of glass grains at 98 degrees Celsius. Method of test and classification.) |
| NF B30-107-1986 |
玻璃.玻璃晶粒在121℃时的耐水解性.试验方法A和分类 |
(Glass. Hydrolytic resistance of glass grains at 121 degrees Celsius. Method of test and classification.) |
| NF B30-108-1-1989 |
玻璃.玻璃容器内表面的耐水性.第1部分:滴定分析测定和分类 |
(Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 1 : determination by titration method and classification.) |
| NF B30-108-2-1989 |
玻璃.玻璃容器内表面的耐水性.第2部分:火焰分光光度法测定和分类 |
(Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 2 : determination by flame spectrometry and classification.) |
| NF B30-109-1986 |
实验室用玻璃器皿.热冲击试验 |
(LABORATORY GLASSWARE. METHODS FOR THERMAL SHOCK TESTS.) |
| NF B30-110-1986 |
玻璃.耐沸腾混合碱水溶液侵蚀.试验方法和分类 |
(Glass. Resistance to attack by a boiling aqueous solution of mixed alkali. Method of test and classification.) |
| NF B30-111-1986 |
玻璃.耐100℃盐酸侵蚀.火焰发射光谱法或火焰原子吸收光谱法 |
(Glass. Resistance to attack by hydrochloric acid at 100 degrees Celsius. Flame emission or flame atomic absorption spectrometric method.) |
| NF B30-112-1986 |
实验室用玻璃器皿.色刻度和色标记用瓷釉耐化学浸蚀性的评价方法 |
(Laboratory glassware. Methods for assessing the chemical resistance of enamels used for colour coding and colour marking.) |
| NF B32-002-1981 |
拉制玻璃.综合 |
(Drawn sheet glass. General.) |
| NF B32-003-1981 |
无色玻璃.综合 |
(Plate and float clear glass. General.) |
| NF B34-001-1976 |
玻璃制仪器、管路及接头.硼硅3.3玻璃的特性 |
(Glass plant, pipeline and fittings. Properties of borosilicate glass 3.3.) |
| NF B34-002-1976 |
玻璃制仪器、管路及接头.试验、操作和使用的一般规则 |
(Glass plant, pipeline and fittings. General rules for testing, handling and use.) |
| NF B34-003-1999 |
玻璃制仪器、管路及接头.标称内径15-1000mm管与管接头.兼容性与互换性 |
(Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to DN 1000. Compatibility and interchangeability.) |
| NF B34-005-1997 |
硅硼玻璃3.3制压力设备.设计、生产和试验的一般规则 |
(Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing.) |
| NF B35-001-1983 |
实验室玻璃器皿.烧杯 |
(Laboratory glassware. Beakers.) |
| NF B35-003-1973 |
实验室用玻璃器皿.钟表用玻璃 |
(LABORATORY GLASSWARE. WATCH-GLASSES.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com