标准号 |
中文名称 |
英文名称 |
| NF X31-403-1995 |
土壤质量.磷的测定.在碳酸氢钠溶液中可溶磷的光谱测定 |
SOIL QUALITY. DETERMINATION OF PHOSPHORUS. SPECTROMETRIC DETERMINATION OF PHOSPHORUS IN SODIUM HYDROGEN CARBONATE SOLUTION. |
| NF X31-409-1995 |
土壤质量.干燃烧后对有机碳和总碳含量的测定(素分析法) |
Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis). |
| NF X31-411-1994 |
土壤质量.使用氯化钡溶液测定有效阳离子交换能力和基本浸透等级 |
SOIL QUALITY. DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY AND BASE SATURATION LEVEL USING BARIUM CHLORIDE SOLUTION. |
| NF X31-412-1994 |
土质.物理化学分析试样的制备 |
Soil quality. Pretreatment of samples for physico-chemical analysis. |
| NF X31-415-1995 |
土壤质量.溶于王水中的痕量素的萃取 |
Soil quality. Extraction of trace elements soluble in aqua regia. |
| NF X31-416-1995 |
土壤质量.电离子交换的能力和用氯化钡溶液进行离子交换的PH值 |
SOIL QUALITY. DETERMINATION OF THE POTENTIAL CATION EXCHANGE CAPACITY AND EXCHANGEABLE CATIONS USING BARIUM CHLORIDE SOLUTION BUFFERED AT PH |
| NF X31-417-1999 |
土壤质量.多环芳香碳氢化合物的测定.高性能液相色谱法 |
SOIL QUALITY. DETERMINATION OF POLYNUCLEAR AROMATIC HYDROCARBONS. METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY. |
| NF X31-418-1998 |
土壤质量.干燃法测定总氮含量(素分析) |
SOIL QUALITY. DETERMINATION OF TOTAL NITROGEN CONTENT BY DRY COMBUSTION (ELEMENTAL ANALYSIS). |
| NF X31-419-1998 |
土壤质量.用硫铬氧化法测定有机碳 |
SOIL QUALITY. DETERMINATION OF ORGANIC CARBON BY SULFOCHROMIC OXIDATION. |
| NF X31-422-2001 |
土质.氯化钡提取物中交换性酸度的测定 |
Soil quality - Determination of exchangeable acidity in barium chloride extracts. |
| NF X31-425-2003 |
土质.测定有机污物用试样的预处理 |
(Soil quality - Pretreatment of samples for determination of organic contaminants.) |
| NF X31-426-2003 |
土壤质量.气相测谱法测定挥发性芳烃、萘和挥发性卤化烃含量.热解析的净化和收集法 |
Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge and trap method with thermal desorption. |
| NF X31-427-2002 |
土质.用缓冲DTPA溶液提取痕量素 |
Soil quality - Extraction of trace elements by buffered DTPA solution. |
| NF X31-428-1-2001 |
土壤质量.用于总素含量测定的溶解作用.第1部分:使用氢氟酸和过氯酸的溶解 |
Soil quality - Dissolution for the determination of total element contents - Part 1: dissolution with hydrofluoric and perchloric acids. |
| NF X31-428-2-2002 |
土壤质量.总素含量测定的稀释法.第2部分:碱熔稀释法 |
Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion. |
| NF X31-429-2001 |
土壤质量.通过干燃烧对总硫的测定. |
Soil quality - Determination of total sulfur by dry combustion. |
| NF X31-433-2003 |
土质.在已知毛体积干密度基础上测定作为体积分数的土壤含水量.重量分析法 |
(Sol quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method.) |
| NF X31-500-1996 |
土壤质量.不饱和区域水含量的测定.中子深度探测法 |
Soil quality. Determination of water content of the unsaturated zone. Neutron depth probe method. |
| NF X31-501-1992 |
土质.物理方法.原状土样松密度的测量.圆桶方法 |
SOIL QUALITY. PHYSICAL METHODS. MEASURING OF THE BULK DENSITY OF A UNDISTURBED SOIL SAMPLE. CYLINDER METHOD. |
| NF X31-502-1992 |
土质.物理方法.松密度的测定.胶球密度仪 |
SOIL QUALITY. PHYSICAL METHODS. MEASURING OF THE BULK DENSITY. RUBBER BALLOON DENSITY APPARATUS. |
| NF X31-503-1992 |
土壤质量.物理方法.集块密度的测定.沙法 |
SOIL QUALITY. PHYSICAL METHODS. MEASURING OF THE BULK DENSITY. SAND METHOD. |
| NF X31-504-1995 |
土壤质量.位于水平位置的传导率和多孔排水性的测试方法.GUYON方法 |
SOIL QUALITY. METHOD FOR MEASURING IN SITU THE EQUIVALENT HORIZONTAL HYDRAULIC CONDUCTIVITY AND THE DRAINAGE POROSITY. GUYON METHOD. |
| NF X31-507-1993 |
土质.土壤的视密度的评定.用Υ射线发射法 |
SOIL QUALITY. EVALUATION OF APPARENT DENSITY OF A SOIL. GAMMA-RAY TRANSMISSION METHOD. |
| NF X31-509-1993 |
土壤质量.土壤地理用途的土地滴注方法 |
SOIL QUALITY. METHOD FOR INSTALLING A PIEZOMETER IN THE GROUND FOR AGROPEDOLOGICAL PURPOSES. |
| NF X31-510-1993 |
土质.土块密度的测定.石蜡涂层法 |
SOIL QUALITY. DETERMINATION OF DENSITY OF CLODS. PARAFFIN COATING METHOD. |
| NF X31-551-1998 |
土壤质量.水保持特性的测定.实验室法 |
SOIL QUALITY. DETERMINATION OF THE WATER RETENTION CHARACTERISTIC. LABORATORY METHODS. |
| NF X31-552-1995 |
土质.孔隙水压的测定.拉力计法 |
SOIL QUALITY. DETERMINATION OF PORE WATER PRESSURE. TENSIOMETER METHOD. |
| NF X31-553-2002 |
土质.使用芯套管作为容积一部分的土壤水含量的测定.重量分析法 |
Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method. |
| NF X31-554-1998 |
土壤质量.颗粒密度的测定 |
Soil quality. Determination of particle density. |
| NF X31-556-1998 |
土壤质量.干松密度的测定 |
Soil quality. Determination of dry bulk density. |
| NF X31-557-2003 |
土壤质量.氧化还原电势的测定.现场试验 |
Soil quality - Determination of redox potential - Field method. |
| NF X31-602-2003 |
土壤质量.挖掘土壤和要求再利用的其他土壤物质特征 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use. |
| NF X31-620-2003 |
土质.与污染场所有关的活动(协调、工程设计、场所清洁和污染清除) |
(Soil quality - Activities related to contaminated sites (consulting, engineering, site clean-up and pollution remediation).) |
| NF X33-003-1998 |
淤泥的特性表示.pH值测定 |
Characterization of sludge. Determination of pH-value. |
| NF X33-004-2000 |
淤泥的特性.干物质点火损失的测定 |
Characterization of sludges - Determination of the loss on ignition of dry mass. |
| NF X33-005-2000 |
淤泥的特性.干残留和水含量的测定 |
Characterization of sludges - Determination of dry residue and water content. |
| NF X33-006-1998 |
水质.取样.第13部分:污水管和水处理厂淤泥的取样指南 |
WATER QUALITY. SAMPLING. PART 13 : GUIDANCE ON SAMPLING OF SLUDGES FROM SEWAGE AND WATER TREATMENT WORKS. (EUROPEAN STANDARD EN ISO 5667-13). |
| NF X33-009-2000 |
淤泥的特性.氮含量的测定 |
Characterization of sludges - Determination of Kjeldahl nitrogen. |
| NF X33-010-2000 |
淤泥的特性.磷和痕量素的测定.水萃取方法 |
Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods. |
| NF X35-004-1-1995 |
机械的安全.人机工效学设计原则.第1部分:术语和一般原则 |
SAFETY OF MACHINERY. ERGONOMIC DESIGN PRINCIPLES. PART 1 : TERMINOLOGY AND GENERAL PRINCIPLES. (EUROPEAN STANDARD EN 614-1). |
| NF X35-004-2-2000 |
机械的安全.人类工效学设计原理.第2部分:机器和工作任务设计之间的交互作用 |
Safety of machinery - Ergonomic design principles - Part 2 : interactions between the design of machinery and work tasks. |
| NF X35-005-2003 |
机械安全.机械设计中人类工效学应用指南 |
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery. |
| NF X35-011-2003 |
建立人体测量数据库的一般要求 |
(General requirements for establishing anthropometric databases.) |
| NF X35-101-1-1997 |
机械安全.显示和控制调节器设计的人类工效学要求.第1部分:人与显示和控制调节器相互作用的一般原则(欧洲标准EN 894-1) |
SAFETY OF MACHINERY. ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS. PART 1 : GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS. (EUROPEAN STANDARD EN 894-1). |
| NF X35-101-2-1997 |
机械安全.显示和控制调节器设计的人类工效学要求.第2部分:显示 |
Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2 : displays. |
| NF X35-101-3-2000 |
机械的安全.显示和控制传动装置设计的人类工效学要求.第3部分:控制传动装置 |
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3 : control actuators. |
| NF X35-102-1998 |
办公室工作空间人类工效学设计 |
Ergonomic design of work spaces in offices. |
| NF X35-104-1983 |
人类工效学.人体在机器和装备上工作时的姿势和尺寸 |
Positions and dimensions for men working on machines and plant. |
| NF X35-104-2003 |
机械设备的安全.机械设备工作台设计的人体测量要求 |
(Safety of machinery - Anthropometric requirements for the design of workstations at machinery.) |
| NF X35-106-1-2001 |
机械安全.人体物理性能.第1部分:术语和定义 |
Safety of machinery - Human physical performance - Part 1 : terms and definitions. |
| NF X35-106-2-2003 |
机械安全.人体特性.第2部分:机械及其零部件的人工装卸 |
(Safety of machinery - Human physical performance - Part 2 : manual handling of machinery and component parts of machinery.) |
| NF X35-106-3-2002 |
机械安全.人体的物理特性.第3部分:机械操作用的推荐负荷极限 |
Safety of machinery - Human physical performance - Part 3 : recommended force limits for machinery operation. |
| NF X35-107-1-1997 |
机械安全.人体测量.第1部分:整个人体进入机械的开口尺寸确定原则 |
Safety of machinery. Human body measurements. Part 1 : principles for determining the dimensions required for openings for whole body access into machinery. |
| NF X35-107-2-1997 |
机器的安全性.人体测量.第2部分:测定人孔尺寸要求的原则 |
Safety of machinery. Human body measurements. Part 2 : principles for determining the dimensions required for access openings. |
| NF X35-107-3-1997 |
机械安全.人体测量.第3部分:人体测量数据 |
Safety of machinery. Human body measurements. Part 3 : anthropometric data. |
| NF X35-108-1992 |
机械的安全.危险声信号.一般要求、设计和试验 |
Safety of machinery. Auditory danger signals. General requirements, design testing. |
| NF X35-111-1994 |
机械的安全.可触摸表面的温度.确定热表面温度极限值的人机工效学数据 |
Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperatur limit values for hot surfaces. |
| NF X35-111/A1-1999 |
机械的安全.可触摸表面的温度.确定热表面温度极限值的人机工效学数据 |
Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperatur limit values for hot surfaces. |
| NF X35-113-2000 |
热环境的人类工效学要求.可接触的热表面的温度.由EN 563辅助的生产标准中建立表面温度限制值的指南 |
Ergonomics of the thermal environment - Temperatures of touchable hot surfaces - Guidance for establishing surface temperature limit values in production standards with the aid of EN 563. |
| NF X35-116-1996 |
机械的安全.可视危险信号.一般要求、设计和试验 |
Safety of machinery. Visual danger signals. General requirements, design and testing. |
| NF X35-118-1997 |
机械的安全.声和可视危险信号以及信息信号系统 |
Safety of machinery. System of auditory and visual danger and information signals. |
| NF X35-122-1-1997 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第1部分:概述(欧洲标准EN ISO 9241-1) |
Ergonomic requirements for office work with visual display terminals (VDTs). Part 1 : general introduction. |
| NF X35-122-1/A1-2001 |
用屏幕终端的办公室工作的人类工效学要求.第1部分:概述 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1 : general introduction. |
| NF X35-122-10-1996 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第10部分:对话原理 |
Ergonomic requirements for office work with visual display terminals (vdts). Part 10 : dialogue principles. |
| NF X35-122-11-1998 |
带有可视显示终端(VDTs)的办公室工作的人类工效学要求.第11部分:可用性指南 |
Ergonomic requirements for office work with visual display terminals (VDTs). Part 11 : guidance on usability. |
| NF X35-122-12-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第12部分:信息表示法 |
Ergonomic requirements for office work with visual display terminals (VDTs). Part 12 : presentation of information. |
| NF X35-122-13-1998 |
用屏幕显示终端(VDTS)的办公室内人类工效学要求.第13部分:用户指南 |
Ergonomic requirements for office work with visual display terminals (VDTs). Part 13 : user guidance. |
| NF X35-122-14-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第14部分:对话菜单 |
Ergonomics requirements for office work with visual display terminals (VDTs). Part 14 : menu dialogues. |
| NF X35-122-15-1998 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第15部分:命令对话 |
Ergonomic requirements for office work with visual display terminals (VDTs). Part 15 : command dialogues. |
| NF X35-122-16-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第16部分:直接操作对话 |
Ergonomic requirements for office work with visual display terminals (VDTs). Part 16 : direct manipulation dialogues. |
| NF X35-122-17-1998 |
用屏幕显示终端(VDTS)的办公室内人类工效学要求.第17部分:填写问答表格 |
Ergonomic requirements for office work with visual display terminals (VDTs). Part 17 : form filling dialogues. |
| NF X35-122-2-1993 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第2部分:工作要求指南 |
Ergonomic requirements for office work with visual display terminals (vdts). Part 2 : guidance on task requirements. |
| NF X35-122-3-1993 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第3部分:可视显示要求(欧洲标准EN 29241-3) |
Ergonomic requirements for office work with visual display terminal (VDTs) - Part 3 : visual display requirements. |
| NF X35-122-3/A1-2001 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第3部分:可视显示要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 3 : visual display requirements. |
| NF X35-122-4-1998 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第4部分:键盘要求 |
ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 4 : KEYBOARD REQUIREMENTS. (EUROPEAN STANDARD EN ISO 9241-4). |
| NF X35-122-5-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第5部分:工作台布置及位置要求 |
ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 5 : WORKSTATION LAYOUT AND POSTURAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 9241-5). |
| NF X35-122-6-2000 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第6部分:工作环境指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6 : guidance on the work environment. |
| NF X35-122-7-1998 |
带有可视显示终端(VDTs)的办公室工作的人类工效学要求.第7部分:带反射的显示器要求(欧洲标准EN ISO 9241-7) |
ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 7 : REQUIREMENTS FOR DISPLAY WITH REFLECTIONS. (EUROPEAN STANDARD EN ISO 9241-7). |
| NF X35-122-8-1997 |
带有可视显示终端(VDTs)的办公室工作的人类工效学要求.第8部分:显示色的要求 |
ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 8 : REQUIREMENTS FOR DISPLAYED COLOURS. (EUROPEAN STANDARD EN ISO 9241-8). |
| NF X35-122-9-2000 |
带有可视显示终端的(VTDS)的办公室工作的人类工效学要求.第9部分:非键盘输入装置的要求 |
Ergonomic requirements for office work with visual display terminals (VTDs) - Part 9 : requirements for non-keyboard input devices. |
| NF X35-123-2-2002 |
平板视觉显示工作的人类工效学要求.第2部分:平板显示人类工效学要求 |
Ergonomic requirements for work with visual displays based on flat panels - Part 2 : ergonomic requirements for flat panel displays. |
| NF X35-124-1999 |
互动系统以人为中心的设计过程 |
Human-centred design processes for interactive systems. |
| NF X35-125-1-2003 |
多媒体用户接口的软件人类工效学.第1部分:设计原理和框架 |
Software ergonomics for multimedia user interfaces - Part 1 : design principles and framework. |
| NF X35-125-3-2003 |
多媒体用户接口的软件人类工效学.第3部分:媒体选择和组合 |
Software ergonomics for multimedia user interfaces - Part 3 : media selection and combination. |
| NF X35-201-1994 |
热环境.在WBGT-INDEX基础上评估热应力对工作人员的影响(湿球球形温度计温度) |
Hot environments. Estimation of the heat stress on working man, based on the wbgt-index (wet bulb globe temperature). |
| NF X35-202-2002 |
热环境的人类工效学.物理量测量仪器 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities. |
| NF X35-203-1995 |
中等热环境.预测平均通过(PMV)和预测不满意百分率(PPD)的测定及温度致适条件规范 |
Moderate thermal environments. Determination of the pmv and ppd indices and specification of the conditions for thermal comfort. |
| NF X35-204-1997 |
热环境.利用要求湿度的计算对热应力的分析测定和说明 |
Hot environments. Analytical determination and interpretation of thermal stress using calculation of required sweat rate. |
| NF X35-205-1994 |
人机工效学.代谢热量的测定 |
Ergonomics. Determination of metabolic heat production. |
| NF X35-206-1995 |
热环境的人类工效学.衣服的隔热和耐蒸发的评定 |
Ergonomics of the thermal environment. Estimation of the thermal insulation and evaporative resistance of a clothing ensemble. |
| NF X35-206-2003 |
热环境人类工效学.服装隔热和抗蒸发的评定 |
(Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble.) |
| NF X35-207-2001 |
用生理学测量法评定热应变 |
Evaluation of thermal strain by physiological measurements. |
| NF X35-208-2001 |
热环境的人类工效学.有关国际标准的应用和原则 |
Ergonomics of the thermal environment - Principles and application of relevant International Standards. |
| NF X35-209-2001 |
热环境的人类工效学.使用主观判断尺度评定热环境的影响 |
Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales. |
| NF X35-210-2001 |
热环境的人类工效学.暴露于极热和冷环境中的人的医学检验 |
Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments. |
| NF X35-211-2002 |
热环境的人类工效学.词汇和符号 |
Ergonomics of the thermal environment - Vocabulary and symbols. |
| NF X35-300-1-2000 |
与脑力工作负荷有关的人类工效学原理.第1部分:一般条款和定义 |
(Ergonomic principles related to mental work-load - Part 1 : general terms and definitions.) |
| NF X35-300-2-2000 |
与脑力工作负载有关的人类工效学原理.第2部分:设计原理 |
(Ergonomic principles related to mental workload - Part 2 : design principles.) |
| NF X35-400-1-2001 |
控制中心的人体工效学设计.第1部分:控制中心的设计原理 |
(Ergonomic design of control centres - Part 1 : principles for the design of control centres.) |
| NF X35-400-2-2001 |
控制中心的人类工效设计.第2部分:控制场所的布置原则 |
(Ergonomic design of control centres - Part 2 : principles for the arrangement of control suites.) |
| NF X35-400-3-2000 |
控制中心的人类工效学设计.第3部分:控制室布置 |
(Ergonomic design of control centres - Part 3 : control room layout.) |
| NF X40-001-1956 |
木材防护.术语 |
(PROTECTION. TERMINOLOGY.) |
| NF X40-002-1983 |
木材防护.词汇 |
(WOOD PRESERVATION. VOCABULARY.) |
| NF X40-100-1-1996 |
木材和木基制品的耐久性.用生物试验测定的木材防腐剂的性能.第1部分:按危险等级的分类 |
(Durability of wood and wood-based products. Performance of preventive wood preservatives as determined by biological tests. Part 1 : specification according to hazard class.) |
| NF X40-100-2-1995 |
木材和木基制品的耐久性.用生物试验测定的木材防腐剂的性能.第2部分:分类和标记 |
(Durability of wood and wood-based products. Performance of preventive wood preservatives as determined by biological tests. Part 2 : classification and labelling.) |
| NF X40-101-1986 |
木材防护.鉴定标准 |
(WOOD PRESERVATIVES. IDENTIFICATION CRITERIA.) |
| NF X40-102-1994 |
木材防护.专业用户用信息标签.实心木材处理用产品 |
Wood preservatives. Labelling for the information of professional users. Products for treatment of solid wood. |
| NF X40-103-1997 |
木材防腐剂.物理化学标准 |
Wood preservatives. Physico-chemical criteria. |
| NF X40-501-1975 |
防护.白蚁.法国建筑物对白蚁的防护 |
Protection - Termites - Protection of buildings in france against termites. |
| NF X40-502-1963 |
颜色.博物馆和美术馆里展出的彩色物品的照明和防护 |
COLOURS. LIGHTING AND PROTECTION AGAINST LIGHT OF COLOURED OBJECTS EXHIBITED IN MUSEUMS AND ART GALLERIES. |
| NF X40-504-1969 |
航上环境保护.船身污物主要类型的实际鉴定 |
PROTECTION IN MARINE ENVIRONMENT. PRACTICAL IDENTIFICATION OF MAIN TYPES OF HULL FOULING. |
| NF X40-505-1992 |
木材防腐剂.抗船蛀虫的防护效果的确定 |
WOOD PRESERVATIVES. DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST MARINE BORERS. (EUROPEAN STANDARD EN 275). |
| NF X40-506-2003 |
装饰油灯.安全和试验方法 |
Decorative oil lamps - Safety requirements and test methods. |
| NF X41-003-2001 |
涂料和清漆.耐中性盐雾的测定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog). |
| NF X41-021-1996 |
胶粘带.抗拉伸强度的测定 |
Self adhesive tapes. Measurement of breaking strength. |
| NF X41-022-1996 |
胶粘带.从不锈钢和胶粘带自身剥离粘性的测定 |
Self adhesive tapes. Measurement of peel adhesion from stainless steel or from its own backing. |
| NF X41-022-2003 |
胶粘带.剥离粘性的测定 |
(Self adhesive tapes - Determination of peel adhesion properties.) |
| NF X41-025-1996 |
胶粘带.断裂伸长度的测定 |
Self adhesive tapes. Measurement of elongation at break. |
| NF X41-026-1996 |
胶粘带.厚度的测定 |
Self adhesive tapes. Measurement of thickness. |
| NF X41-026-2003 |
胶粘带.厚度的测量 |
(Self adhesive tapes - Measurement of thickness.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com