标准号 |
中文名称 |
英文名称 |
NF P12-319-1999 |
砌筑体用砂浆的试验方法.第19部分:硬化抹灰和灰浆水蒸气穿透率的测定 |
(METHODS OF TEST FOR MORTAR FOR MASONRY. PART 19 : DETERMINATION FOR WATER VAPOUR PERMEABILITY OF HARDENED RENDERING AND PLASTERING MORTARS. (EUROPEAN STANDARD EN 1015-19).) |
NF P12-321-2003 |
圬工用灰浆的检验方法.第21部分:测定底层灰浆与基材的兼容性 |
(Methods of test for mortar for masonry - Part 21 : Determination of the compatibility of one-coat rendering mortars with substrates.) |
NF P12-521-2003 |
砖石建筑辅助件规范.第1部分:拉杆、带条、吊架和托架 |
(Specification for ancillary components for masonry - Part 1 : ties, tension straps, hangers and brackets.) |
NF P12-522-2003 |
砖石建筑辅助件规范.第2部分:门窗过梁 |
(Specification for ancillary components for masonry - Part 2 : lintels.) |
NF P12-523-2003 |
砖石建筑辅助件规范.第3部分:钢网结构工作用底层接缝加筋 |
(Specification for ancullary components for masonry - Part 3 : bed joint reinforcement of steel meshwork.) |
NF P12-602-2000 |
圬工辅助成份的试验方法.第2部分:灰浆粘结处预制床接头增强的粘结强度的测定 |
(Methods of test for ancillary components for masonry - Part 2 : determination of bond strength of prefabricated bed joint reinforcement in mortar joints.) |
NF P12-603-2000 |
圬工辅助成份的试验方法.第3部分:预制床连接处增强的焊接剪切负载容量的测定 |
(Methods of test for ancillary components for masonry - Part 3 : determination of shear load capacity of welds in prefabricated bed joint reinforcement.) |
NF P12-604-2002 |
砖石工程用辅助部件的试验方法.第4部分:测定托架的载荷能力和加载变形特性 |
(Methods of test for ancillary components for masonry - Part 4 : determination of load capacity and load-deflection characteristics of straps.) |
NF P12-605-2000 |
圬工辅助成份的试验方法.第5部分:拉伸和压缩负载容量和墙系柱和负载代替特性的测定 |
(Methods of test for ancillary components for masonry - Part 5 : determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test).) |
NF P12-606-2000 |
圬工辅助成份的试验方法.第5部分:拉伸和压缩负载容量和墙系柱和负载代替特性的测定(双端法) |
(Methods of test for ancillary components for masonry - Part 6 : determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test).) |
NF P12-607-2000 |
圬工辅助成份的试验方法.第7部分:拉伸和压缩负载容量和墙系柱和负载代替特性的测定(单端法) |
(Methods of test for ancillary components for masonry - Part 7 : determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint co) |
NF P12-608-2000 |
圬工辅助成份的试验方法.第8部分:墙筋吊架处负载偏转特性和负载容量的测定 |
(Methods of test for ancillary components for masonry - Part 8 : determination of load capacity and load-deflection characteristics of joist hangers.) |
NF P12-609-2000 |
圬工辅助成份的试验方法.第9部分:梁的耐挠曲和耐剪切性的测定 |
(Methods of test for ancillary components for masonry - Part 9 : determination of flexural resistance and shear resistance of lintels.) |
NF P12-610-2000 |
圬工辅助成份的试验方法.第10部分:支架负载偏转特性和负载容量的测定 |
(Methods of test for ancillary components for masonry - Part 10 : determination of load capacity and load deflection characteristics of brackets.) |
NF P12-611-2000 |
圬工辅助部件的试验方法.第11部分:尺寸的测定和梁的弯曲 |
(Methods of test for ancillary components for masonry - Part 11 : determination of dimensions and bow of lintels.) |
NF P12-613-2002 |
圬工用的辅助构件的试验方法.第13部分:有机涂层耐冲击性、耐磨性及耐腐蚀性的测定 |
(Methods of test for ancillary components for masonry - Part 13 : determination of resistance to impact, abrasion and corrosion of organic coatings.) |
NF P12-701-1999 |
砂浆的试验方法.第1部分:压强的测定 |
(METHOD OF TEST FOR MASONRY. PART 1 : DETERMINATION OF COMPRESSIVE STRENGTH. (EUROPEAN STANDARD EN 1052-1).) |
NF P12-702-2000 |
圬工的试验方法.第2部分:挠曲强度的测定 |
(Methods of test for masonry - Part 2 : determination of flexural strength.) |
NF P12-703-2003 |
圬工的检验方法.第3部分:初始剪切强度的测定 |
(Methods of test for masonry - Part 3 : determination of initial shear strength.) |
NF P12-704-2001 |
圬工的试验方法.第4部分:包括防潮层的剪切强度的测定 |
(Methods of test for masonry - Part 4 : determination of shear strength including damp proof course.) |
NF P12-801-2002 |
砖石工程和砖石工程产品.测定设计热值的方法 |
(Masonry and masonry products - Methods for determining design thermal values.) |
NF P13-302-1983 |
地板用带预制混凝土桁条的陶土空心砖 |
(Hollow clay blocks for floors made with precast concrete beams.) |
NF P13-307-1995 |
小的粘土板.墙表面用小的粘土板.规范和试验方法 |
(SMALL CLAY PLATES. WALL COVERING IN SMALL CLAY PLATES. SPECIFICATIONS AND TEST METHODS.) |
NF P14-101-1983 |
墙和隔墙用混凝土块.定义 |
(Concrete blocks for walls and partitions. Definitions.) |
NF P14-201-1/A1-1998 |
DTU 26.2.建筑工程.带有液压粘合剂的样板和板梁.第1部分:技术规范 |
(DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.) |
NF P14-201-1/A2-2000 |
DTU 26.2.建筑工程.带有液压粘合剂的样板和板梁.第1部分:技术规范 |
(DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.) |
NF P14-201-1/A3-2003 |
DTU 26.2.建筑工程.有液压粘合剂座的找平层和平板.第1部分:技术规范 |
(DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.) |
NF P14-201-11-1998 |
NF P14-201-1-1993的补充件1 |
() |
NF P14-201-2-1993 |
建筑工程.私人合同.水硬性粘合料基的样板及板块.第2部分:特别条款 |
(DTU 26-2. BUILDING WORKS. PRIVATE CONTRACTS. SCREEDS AND SLABS WITH A BASE OF HYDRAULIC BINDERS. PART 2 : SPECIAL CLAUSES.) |
NF P14-202-2000 |
整平板材料和地板整平.定义 |
(Screed material and floor screeds - Definitions.) |
NF P14-203-2003 |
刮板材料和地面刮板.刮板材料.特性和要求 |
(Screed material and floor screeds - Screed materia - Properties and requirements.) |
NF P14-204-1-2003 |
找平层材料的试验方法.第1部分:取样、标记和试验用硫化样品 |
(Methods of test for screed materials - Part 1 : sampling, making and curing specimens for test.) |
NF P14-204-2-2003 |
找平层材料的试验方法.第2部分:挠曲强度和抗压强度的测定 |
(Methods of test for screed materials - Part 2 : determination of flexural and compressive strength.) |
NF P14-204-4-2003 |
找平层材料的试验方法.第4部分:耐磨损BCA的测定 |
(Methods of test for screed materials - Part 4 : determination of wear resistance-BCA.) |
NF P14-204-6-2003 |
找平层材料的试验方法.第6部分:表面硬度的测定 |
(Methods of test for screed materials - Part 6 : determination of surface hardness.) |
NF P14-204-8-2003 |
找平层材料的试验方法.第8部分:粘结强度的测定 |
(Methods of test for screed materials - Part 8 : determination of bond strength.) |
NF P14-402-1983 |
砌块.在墙和隔墙混凝土砖.尺寸 |
(Concrete blocks for walls and partitions. Dimensions.) |
NF P15-101-1-2001 |
水泥.第1部分:通用水泥的一致性标准,规范和组成 |
(Cement - Part 1 : composition, specifications and conformity criteria for common cements.) |
NF P15-101-2-2001 |
水泥.第2部分:合格评定 |
(Cement - Part 2 : conformity evaluation.) |
NF P15-103-1995 |
圬工水泥.第2部分:试验方法 |
(MASONRY CEMENT. PART 2 : TEST METHODS. (EUROPEAN STANDARD EN 413-2).) |
NF P15-104-2002 |
建筑石灰.第1部分:定义、规范和合格标准 |
(Building lime - Part 1 : definitions, specifications and conformity criteria.) |
NF P15-105-2002 |
建筑用石灰.第2部分:试验方法 |
(Building lime - Part 2 : test methods.) |
NF P15-106-2002 |
建筑石灰.第3部分:合格评定 |
(Building lime - Part 3 : conformity evaluation.) |
NF P15-108-2000 |
液压胶合剂.液压道路胶合剂.组成、规范和合格标准 |
(Hydraulic binders - Hydraulic road binders - Composition, specifications and conformity criteria.) |
NF P15-201-1-1993 |
DTU 26-1.建筑工程.水泥砂浆、石灰砂浆、混合石膏及熟石灰砂浆制成的石膏制品.第1部分:技术规范 |
(DTU 26-1. BUILDING WORKS. PLASTERWORKS MADE FROM CEMENT MORTARS, LIME MORTARS, MIXED GYPSUM AND SLAKED LIME MORTARS. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P15-201-1/A1-1994 |
DTU 26.1.NF P 15-201-1-1993的修改件1 |
() |
NF P15-201-1/A2-1999 |
补充件2 |
() |
NF P15-201-11-1994 |
NF P15-201-1-1993的补充件1 |
() |
NF P15-201-12-1999 |
DTU 26.1.NF P15-201-1-93的补充件2 |
() |
NF P15-201-2-1993 |
DTU 26-1.建筑工程,私人合同.用水泥砂浆,石灰砂浆,混合石膏和消热石灰砂浆制成的灰浆.第2部分:特殊条款 |
(DTU 26-1. BUILDING WORKS. PRIVATE CONTRACTS. PLASTERWORKS MADE FROM CEMENT MORTARS, LIME MORTARS, MIXED GYPSUM AND SLAKED LIME MORTARS. PART 2 : SPECIAL CLAUSES.) |
NF P15-201-2/A1-1994 |
DTU 26.1.NF P 15-201-2-1993的修改件1 |
() |
NF P15-201-21-1994 |
NF P15-201-2-1993的补充件1 |
() |
NF P15-202-1-1993 |
建筑工程.具有粘合剂的多孔矿物纤维覆盖物.第1部分:技术规范 |
(DTU 27-1. BUILDING WORKS. COVERINGS FROM BLOWN-OUT MINERAL FIBRES WITH BINDER. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P15-202-2-1993 |
建筑工程.私人合同.具有粘合料的多孔矿物纤维覆盖层.第2部分:特别条款 |
(DTU 27-1. BUILDING WORKS. PRIVATE CONTRACTS. COVERINGS FROM BLOWN-OUT MINERAL FIBRES WITH BINDER. PART 2 : SPECIAL CLAUSES.) |
NF P15-203-1-1997 |
DTU 27.2.建筑工程.用潮湿喷射产品喷涂的覆盖层.第1部分:技术规范 |
(DTU 27.2. BUILDING WORKS. COVERINGS FROM BLOWN-OUT BY WET-SPRAYED PRODUCTS. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P15-203-2-1997 |
DTU 27.2.建筑工程.用潮湿喷射产品时排放口覆盖.第2部分:特殊条款 |
(DTU 27.2. BUILDING WORKS. PRIVATE CONTRACTS. COVERINGS FROM BLOWN-OUT BY WET-SPRAYED PRODUCTS. PART 2 : SPECIAL CLAUSES.) |
NF P15-301/A1-1980 |
修改件1 |
() |
NF P15-301/A2-1981 |
修改件2 |
() |
NF P15-302-1995 |
水胶粘剂.热带用水泥.组成,规格和一致性要求 |
(HYDRAULIC BINDERS. CEMENTS FOR TROPICAL USE. COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA.) |
NF P15-306-1964 |
水硬性粘合料.石灰矿渣水泥CLX |
(HYDRAULIC BINDERS. LIME BLAST-FURNACE CEMENTS.) |
NF P15-307-2000 |
水硬性粘合料.砌筑水泥.组份、规范和合格标准 |
(Hydraulic binders - Masonry cements - Composition, specifications and conformity criteria.) |
NF P15-308-1964 |
水硬性粘合料.天然水泥CN |
(HYDRAULIC BINDERS. NATURAL CEMENTS.) |
NF P15-314-1993 |
水硬性胶结剂.快硬水泥 |
(Hydraulic binders. Prompt natural cement.) |
NF P15-315-1991 |
水硬性粘合料.高铝水泥 |
(HYDRAULIC BINDERS. HIGH-ALUMINA MELTED CEMENT.) |
NF P15-317-1995 |
水压打桩机.耐海水腐蚀的水泥 |
(Hydraulic binders. Sea-water resisting cements.) |
NF P15-318-1998 |
用于预拉伸混凝土的有限硫化物含量的混凝土.水力胶合剂 |
(Hydraulic binders. Cement with limited sulphides content for use in prestressed concrete.) |
NF P15-436-1988 |
粘结剂.半绝热量热法测定水泥水化热(LANGAVANT测热法) |
(BINDERS. MEASURING THE HYDRATION HEAT OF CEMENTS BY MEANS OF SEMI-ADIABATIC CALORIMETRY (LANGAVANT METHOD).) |
NF P15-443-1960 |
水硬性粘合料.试验技术.澄清法 |
(HYDRAULIC BINDERS. FLUOROMETRY.) |
NF P15-471-1995 |
水泥的试验方法.第一部分:强度测定 |
(Methods of testing cement. Part 1 : determination of strength.) |
NF P15-472-1995 |
水泥的试验方法.第2部分:水泥的化学分析(欧洲标准EN 196-2) |
(Methods of testing cement. Part 2 : chemical analysis of cement.) |
NF P15-473-1995 |
水泥的试验方法.第三部分:凝结时间和安定性的测定 |
(Methods of testing cement. Part 3 : determination of setting time and soundness.) |
NF P15-475-1995 |
水泥的试验方法.第五部分:火山灰水泥的凝硬性试验 |
(Methods of testing cement. Part 5 : pozzolanicity test for pozzolanic cement.) |
NF P15-476-1990 |
水泥试验方法.细度的测定 |
(Methods of testing cement. Determination of fininess.) |
NF P15-477-1990 |
水泥试验方法.取样的方法 |
(METHODS OF TESTING CEMENT. METHODS OF TAKING AND PREPARING SAMPLES OF CEMENT. (EUROPEAN STANDARD EN 196-7).) |
NF P15-478-1990 |
水泥试验方法.水泥中氯化物.二氧化碳和碱含量的测定 |
(Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement.) |
NF P15-900-1-2000 |
本地公共服务.与饮用水供应和废水有关的供应指南.第1部分:用户服务 |
(Local public services - Guidelines for service activities relating to drinking water supply and sewerage - Part 1 : user services.) |
NF P15-900-2-2001 |
地区公共服务.应用水和废水服务指南.第2部分:废水网络的管理 |
(Local public services - Guidelines for drinking water supply and sewerage service activities - Part 2 : management of a sewerage network.) |
NF P15-900-3-2002 |
地区公共服务.与饮用水供应和废水有关的服务工作指南.第3部分:废水处理的管理 |
(Local public services - Guidelines for service activities relating to drinking water supply and sewerage - Part 3 : management of waste water treatment.) |
NF P15-900-4-2002 |
地区公共服务.与饮用水供应和废水有关的服务工作指南.第4部分:饮用水系统的管理 |
(Local public services - Guidelines for service activities relating to drinking water supply and sewerage - Part 4 : management of drinking water system.) |
NF P15-910-2001 |
在非收集污水区域与家用污水净化有关的服务活动.自身污水处理装置诊断及其维修合同化指南 |
(Service activities relating to domestic sewerage purification in non-collective sewerage areas - Guidelines for a diagnosis of self-contained sewerage installations and for the contractualization of t) |
NF P16-100-1997 |
自流系统泄放、排水和污水管部件的一般要求 |
(General requirements for components used in discharge pipes, drains and sewers for gravity systems.) |
NF P16-101-1999 |
用于液压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN773) |
(General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers.) |
NF P16-103-1999 |
用于气压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN1293) |
(General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers.) |
NF P16-104-2001 |
外部建筑排水和污水系统翻新和修理用构件的一般要求 |
(General requirements for components used for renovation and repair of drain and sewer systems outside buildings.) |
NF P16-120-1998 |
在各种负载条件下地下管道的结构设计.第1部分:一般要求(EN 1295-1) |
(Structural design of buried pipelines under various conditions of loading. Part 1 : general requirements.) |
NF P16-125-1997 |
下水管道的铺设和检验 |
(Construction and testing of drains and sewers.) |
NF P16-126-2000 |
非挖沟结构和管道及排水管的试验 |
(Trenchless construction and testing of drains and sewers.) |
NF P16-150-1-1996 |
建筑物外部的排污系统.第1部分:总则 |
(DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 1 : GENERALITIES AND DEFINITIONS. (EUROPEAN STANDARD EN 752-1).) |
NF P16-150-2-1996 |
建筑物外部的排污系统.第2部分:性能要求 |
(DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 2 : PERFORMANCE REQUIREMENTS. (EUROPEAN STANDARD EN 752-2).) |
NF P16-150-3-1996 |
建筑物外部的排污系统.第3部分:规划 |
(DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 3 : PLANNING. (EUROPEAN STANDARD EN 752-3).) |
NF P16-150-4-1997 |
建筑物外部的排污系统.第4部分:液压设计和环境考虑 |
(DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 4 : HYDRAULIC DESIGN AND ENVIRONMENTAL CONSIDERATIONS. (EUROPEAN STANDARD EN 752-4).) |
NF P16-150-5-1997 |
建筑物外部的排污系统.第5部分:恢复 |
(DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 5 : REHABILITATION. (EUROPEAN STANDARD EN 752-5).) |
NF P16-150-6-1998 |
建筑物外部排水和污水系统.第6部分:泵设备 |
(Drain and sewer systems outside buildings. Part 6 : pumping installations.) |
NF P16-150-7-1998 |
建筑物外管道和污水系统.第6部分:维修和操作(欧洲标准EN 752-7) |
(DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 7 : MAINTENANCE AND OPERATIONS. (EUROPEAN STANDARD EN 752-7).) |
NF P16-155-2-2003 |
建筑物外部排水和排污系统条件.第2部分:外观检查编码系统 |
(Condition of drain and sewer systems outside buildings - Part 2 : visual inspection coding system.) |
NF P16-200-1997 |
建筑物外部的真空排污系统 |
(VACUUM SEWERAGE SYSTEMS OUTSIDE BUILDINGS. (EUROPEAN STANDARD EN 1091).) |
NF P16-210-1999 |
建筑物中的真空排水系统 |
(VACUUM DRAINAGE SYSTEMS INSIDE BUILDINGS. (EUROPEAN STANDARD EN 12109).) |
NF P16-220-2003 |
排水系统用通气阀.要求、试验方法和合格评定 |
(Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity.) |
NF P16-250-1-2000 |
建筑物内的重力排水系统.第1部分:一般和性能要求 |
(Gravity drainage systems inside buildings - Part 1: general and performance requirements.) |
NF P16-250-2-2000 |
建筑物内的重力排水系统.第2部分:卫生管道,布局和计算 |
(Gravity drainage systems inside buildings - Part 2 : sanitary pipework, layout and calculation.) |
NF P16-250-3-2000 |
建筑物内的重力排水系统.第3部分:屋顶管道,布局和计算 |
(Gravity drainage systems inside buildings - Part 3 : roof drainage, layout and calculation.) |
NF P16-250-4-2000 |
建筑物内的重力排水系统.第4部分:废水提升工厂.布局和计算 |
(Gravity drainage systems inside buildings - Part 4 : wastewater lifting plants - Layout and calculation.) |
NF P16-250-5-2000 |
建筑物内的重力排水系统.第5部分:安装和试验.操作维护和使用指南 |
(Gravity drainage systems inside buildings - Part 5 : installation and testing, instructions for operation, maintenance and use.) |
NF P16-260-1-2001 |
建筑物和现场用废水提升装置.施工和试验原则.第1部分:包含粪便废物的废水提升工厂 |
(Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1 : lifting plants for wastewater containing faecal matter.) |
NF P16-260-2-2001 |
建筑物和现场用废水提升装置.施工和试验原则.第2部分:无粪便废水提升工厂 |
(Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2 : lifting plants for faecal-free wastewater.) |
NF P16-260-3-2001 |
建筑物和现场用废水提升装置.施工和试验原则.第3部分:受限使用的提升含有粪便物废水的装置 |
(Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3 : lifting plants for wastewater containing faecal matter for limited applications.) |
NF P16-260-4-2001 |
建筑物和现场用废水提升装置.施工和试验原则.第4部分:无粪便废水和含粪便物废水用单向阀 |
(Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : non-return valves for faecal-free wastewater and wastewater containing faecal matter.) |
NF P16-304-1997 |
地下排水管道用纤维水泥管.第1部分:重力循环系统用管子、接头和配件(欧洲标准EN 588-1) |
(Fibre-cement pipes for sewers and drains. Part 1 : pipes, joints and fittings for gravity systems.) |
NF P16-304-2-2002 |
排水管和下水道用纤维水泥管.第2部分:人孔和检查室 |
(Fibre-cement pipes for drains and sewers - Part 2 : manholes and inspection chambers.) |
NF P16-306-2000 |
建筑物排放系统的纤维混凝土管线和配件.交货的尺寸和技术条款 |
(Fibre-cement pipes and fiftings for discharge systems for buildings - Dimensions and technical terms of delivery.) |
NF P16-321-1-1996 |
排水排污用陶管、配件和管接头.第1部分:要求(欧洲标准EN 295-1) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 1 : requirements.) |
NF P16-321-1/A3-1999 |
雨水和污水管道用陶土管、配件及管连接件.第1部分:要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1 : requirements.) |
NF P16-321-13-1999 |
NF P16-321-1-96的补充件3 |
() |
NF P16-321-2-1992 |
管、陶土配件及上水与排水管的安装.第2部分:质量监督和采样(EN 295-2) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 2 : quality control and sampling.) |
NF P16-321-2/A1-1999 |
修改件1 |
() |
NF P16-321-21-1999 |
NF P16-321-2-92的补充件1 |
() |
NF P16-321-3-1992 |
雨水管和污水管用陶土管、配件和管道连接件.第3部分:试验方法(EN 295-3) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 3 : test methods.) |
NF P16-321-3/A1-1999 |
修改件1 |
() |
NF P16-321-31-1999 |
NF P16-321-3-92的补充件1 |
() |
NF P16-321-4-1995 |
排水管和污水管用的陶土管和配件及管接头.第4部分:专用配件、转换接头和可互换附件的要求(EN 295-4) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 4 : requirements for special fittings, adaptors and compatible accessories.) |