标准号 |
中文名称 |
英文名称 |
NF C93-328-1981 |
电子件.电感件和磁回路.非耦合磁回路用线圈和安装附件.一般规定 |
(COMPONENTS FOR ELECTRONIC EQUIPMENTS. MAGNETIC CORES AND ACCESSORIES. ACCESSORIES FOR LAMINATIONS.) |
NF C93-329-2000 |
U型和E型铁氧体磁芯的标记 |
(Marking on U and E ferrites cores.) |
NF C93-330-1997 |
用在通讯和电子设备的变压器和电感器.线圈主尺寸:第1部分:层压芯片线圈 |
(Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formers. Part 1 : coil formers for laminated cores.) |
NF C93-331-1973 |
电子件.磁和铁氧体件.可调或不可调低电感线圈.一般规定 |
(COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC COMPONENTS AND FERRITE MATERIALS. INDUCTOR OF LOW SELF-INDUCTANCE VALUE. GENERAL REQUIREMENTS.) |
NF C93-332-1980 |
电子件.电信或专用电子设备用变压器和感应线圈.一般规定 |
(ELECTRONIC COMPONENTS. TRANSFORMERS AND INDUCTORS FOR TELECOMMUNICATION AND PROFESSIONAL ELECTRONIC EQUIPMENT. GENERAL REQUIREMENTS.) |
NF C93-333-1987 |
电子件.磁和铁氧体件.表面安装用低电感线圈.一般规定 |
(MAGNETIC COMPONENTS. SURFACE MOUNTING INDUCTORS. GENERAL REQUIREMENTS.) |
NF C93-334-1981 |
电子件.供电用磁性氧化铁芯的尺寸(EC铁芯) |
(Electronic components. Dimensions for magnetic oxyde cores intended for use in power supplies (ec-cores).) |
NF C93-336-1983 |
电子设备用件.磁芯和附件.铁芯用附件 |
(COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC CORES AND ACCESSORIES. ACCESSORIES FOR FERRITE CORES.) |
NF C93-337-1998 |
电子和通信设备用变压器和电感器.测量方法和试验程序 |
(Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures.) |
NF C93-338-1998 |
磁性氧化物正方形磁芯(RM磁芯)的尺寸和附件 |
(Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts.) |
NF C93-338/A2-2000 |
由磁性氧化物和相关零件制造的方型磁心(RM-磁心)的尺寸 |
(Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts.) |
NF C93-339-1998 |
供电设备用磁性氧化铁芯(ETD-CORES).尺寸 |
(Magnetic oxide cores (ETD-cores) intended for use in power supply applications. Dimensions.) |
NF C93-340-1-2000 |
铁氧体磁芯.表面缺陷极限指南.第1部分:总规范 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 1 : general specification.) |
NF C93-340-3-2000 |
铁氧体磁心.表面不规则性限值指南.第3部分:ETD芯和E芯 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 3 : ETD-cores and E-cores.) |
NF C93-341-1998 |
电信和电子设备用变压器和电感器的叠片铁芯包装件.第1部分:尺寸 |
(Laminated core packages for transformers and inductors used in telecommunication and electronic equipment. Part 1 : dimensions.) |
NF C93-342-1998 |
用于远程通信和电子设备的叠层磁芯包.第2部分:使用YEE2叠层的磁芯的电气特性 |
(Laminated core packages for use in telecommunication and electronic equipment. Part 2 : electrical characteristics for cores using YEE 2 laminations.) |
NF C93-343-1998 |
磁性氧化和相关零件制永久磁铁芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts. Dimensions.) |
NF C93-345-1998 |
软铁素体材料分级(欧洲标准61332) |
(Soft ferrite material classification.) |
NF C93-346-1998 |
电子和电信设备用固定电感器.标记代码 |
(Fixed inductors for use in electronic and telecommunication equipment. Marking codes.) |
NF C93-349-1998 |
回旋磁装置中产生的内调谐产品值的测量方法 |
(Measuring method for the level of intermodulation products generated in a gyromagnetic device.) |
NF C93-350-2000 |
微波铁氧体件.主要特性的测量方法 |
(Microwave ferrite components - Measuring methods for major properties.) |
NF C93-353-2003 |
磁性氧化物制壶形铁心及相关零件的尺寸 |
(Dimensions of pot-cores made of magnetic oxides and associated parts.) |
NF C93-354-2003 |
磁性零件有效参数的计算 |
(Calculation of the effective parameters of magnetic piece parts.) |
NF C93-355-1968 |
电子件.无线电收音机的中频变压器 |
(COMPONENTS FOR ELECTRONIC EQUIPMENT. INTERMEDIATE FREQUENCY TRANSFORMERS USED IN BROADCAST RECEIVERS.) |
NF C93-356-1998 |
铁素体芯表面不规则性限值的指南.第2部分:RM芯 |
(Guidance of the limits of surface irregularities of ferrite cores. Part 2 : RM-cores.) |
NF C93-361-1998 |
用于电子设备和通迅设备的变压器和导体.第1部分:一般规范 |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 1 : generic specification.) |
NF C93-362-1998 |
用于电子和远程通信设备的变压器和导体.第2部分:以容量验收过程为基础的单型变压器的分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 2 : sectional specification for signal transformers on the basis of the capability approval procedure.) |
NF C93-363-1998 |
用于电气和远程设备的变压器和感应器.第3部分: 基于可验收过程的电力变压器分规范(欧洲标准EN61 248-3) |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 3 : sectional specification for power transformers on the basis of the capability approval procedure.) |
NF C93-364-1998 |
用于电子设备和通迅设备的变压器和导体.第4部分:基于容量扩增过程的接转模式电力供应(SMPS)用电力变压器的 |
(Transformers and inductors for use in electronic and telecommunication and telecommunication equipment. Part 4 : sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure.) |
NF C93-365-1998 |
用于电气和远程设备的变压器和感应器.第5部分: 基于可验收过程的脉冲变压器分规范(欧洲标准EN61 248-5) |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 5 : sectional specification for pulse transformers on the basis of the capability approval procedure.) |
NF C93-366-1998 |
印制板和印制板组件.设计和使用. 第1-1部分:一般要求.电气件平坦性考虑.(EN 61.188-1-1) |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 6 : sectional specification for inductors on the basis of the capability approval procedure.) |
NF C93-367-1998 |
电子和电信设备用变压器和电感器.第7部分:有关高频变压器性能检验程序基础的分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 7 : sectional specification for high-frequency transformers on the basis of the capability approval procedure.) |
NF C93-368-2001 |
磁氧化物制成的低断面芯的尺寸 |
(Dimensions of low-profile cores made of magnetic oxides.) |
NF C93-369-1-2003 |
软磁材料衬芯的测量方法.第1部分:总规范 |
(Cores made of soft magnetic materials - Measuring methods - Part 1 : generic specification.) |
NF C93-369-3-2001 |
软磁性材料制成的磁芯.测量方法.第3部分:高冲击水平的磁化特性 |
(Cores made of soft magnetic materials - Measuring methods - Part 3 : magnetic properties at high excitation level.) |
NF C93-370-1-2002 |
高频感应件.电气特性和测量方法.第1部分:毫微亨(利)级芯片式感应器 |
(High frequency inductive components - Electrical characteristics and measuring methods - Part 1 : nanohenry range chip inductor.) |
NF C93-371-2003 |
高频感应部件.非电气特性和测量方法.第1部分:电子和电信设备用固定的表面安装感应器 |
(High frequency inductive components - Non electrical characteristics and measuring methods - Part 1 : fixed, surface mounted inductors for use in electronic and telecommunication equipment.) |
NF C93-372-2-2003 |
铁氧体软磁芯的术语和命名.第2部分:尺寸参考 |
(Terms and nomenclature for cores made of magnetically soft ferrites - Part 2 : reference of dimensions.) |
NF C93-400-1-1-2002 |
电子设备连接器.试验和测量.第1-1部分:一般检查.试验1a:外观检查 |
(Connectors for electronic equipment - Tests and measurements - Part 1-1 : general examination - Test 1a : visual examination.) |
NF C93-400-1-100-2001 |
电子设备用连接件.试验和测量.第1-100部分:通则.可应用的出版物 |
(Connectors for electronic equipment - Tests and measurements - Part 1-100 : general - Applicable publications.) |
NF C93-400-1-2-2002 |
电子设备连接器.试验和测量.第1-2部分:一般检查.试验1b:尺寸和质量检查 |
(Connectors for electronic equipment - Tests and measurements - Part 1-2 : general examination - Test 1b : examination of dimension and mass.) |
NF C93-400-1-2001 |
电子设备用连接件.试验和测量.第1部分:通则 |
(Connectors for electronic equipment - Test and measurements - Part 1 : general.) |
NF C93-400-1-3-1998 |
电气设备用机电件.基本试验过程和测量方法.第1部分:一般检验.第3节:试验1C:电气啮合长度 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1 : general examination. Section 3 : test 1c : electrical engagement length.) |
NF C93-400-1-4-1998 |
电气设备用机电件.基本试验过程和测量方法.第1部分:一般检验.第3节:试验1D:接触保护效果 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1 : general. Section 4 : test 1d : contact protection effectiveness (scoop-proof).) |
NF C93-400-10-4-1997 |
电子设备用机电件.基本试验过程和测量方法.第10部分:冲击试验(自由件)、静负荷试验(固定件)、耐久性 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 10 : impact tests (free components), static load tests (fixed components), endurance tests and overload tests. Section 4 : test 10d : electrical o |
NF C93-400-11-1-1999 |
电子设备用电机件.基本试验过程和测量方法.第11部分:气候试验.第1节:试验11A.气候序列 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 1 : test 11a. Climatic sequence.) |
NF C93-400-11-10-2002 |
电子设备连接器.试验和测量.第11-10部分:气候试验.试验11j:寒冷 |
(Connectors for electronic equipment - Tests and measurements - Part 11-10 : climatic tests - Test 11j : cold.) |
NF C93-400-11-11-2002 |
电子设备连接器.试验和测量.第11-11部分:气候试验.试验11k:低气压 |
(Connectors for electronic equipment - Tests and measurements - Part 11-11 : climatic tests - Test 11k : low air pressure.) |
NF C93-400-11-12-2002 |
电子设备连接器.试验和测量.第11-12部分:气候试验.试验11m:湿热、循环 |
(Connectors for electronic equipment - Tests and measurements - Part 11-12 : climatic tests - Test 11m : damp heat, cyclic.) |
NF C93-400-11-13-2002 |
电子设备连接器.试验和测量.第11-13部分:气候试验.试验11n:无钎焊包装连接的气密性 |
(Connectors for electronic equipment - Tests and measurements - Part 11-13 : climatic tests - Test 11n : gas tightness, solderless wrapped connections.) |
NF C93-400-11-14-1997 |
电子设备用机电件.基本试验过程和测量方法.第11部分:气候试验.第14节:试验11p:单一流动气体腐蚀试验 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 14 : test 11p : flowing single gas corrosion test.) |
NF C93-400-11-2-2002 |
电子设备连接器.试验和测量.第11-2部分:气候试验.试验11b:组合的/顺序的低温、低气压和湿热 |
(Connectors for electronic equipment - Tests and measurements - Part 11-2 : climatic tests - Test 11b : combined/sequential cold, low air pressure and damp heat.) |
NF C93-400-11-3-2002 |
电子设备连接器.试验和测量.第11-3部分:气候试验.试验11c:湿热、稳态 |
(Connectors for electronic equipment - Tests and measurements - Part 11-3 : climatic tests - Test 11c : damp heat, steady state.) |
NF C93-400-11-4-2002 |
电子设备连接器.试验和测量.第11-4部分:气候试验.试验11d:温度的快速变化 |
(Connectors for electronic equipment - Tests and measurements - Part 11-4 : climatic tests - Test 11d : rapid change of temperature.) |
NF C93-400-11-5-2002 |
电子设备连接器.试验和测量.第11-5部分:气候试验.试验11e:霉菌生长 |
(Connectors for electronic equipment - Tests and measurements - Part 11-5 : climatic tests - Test 11e : mould growth.) |
NF C93-400-11-6-2002 |
电子设备连接器.试验和测量.第11-6部分:气候试验.试验11f:盐雾腐蚀 |
(Connectors for electronic equipment - Tests and measurements - Part 11-6 : climatic tests - Test 11f : corrosion, salt mist.) |
NF C93-400-11-7-1997 |
电子设备用机电件.基本试验过程和测量方法.第11部分:气候试验.第7节:试验11g:混合流动气体腐蚀试验 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 7 : test 11g : flowing mixed gas corrosion test.) |
NF C93-400-11-8-1999 |
电子设备的电机件.基本试验过程和测量方法.第11部分:气候试验.第8节:试验11H:沙和尘土 |
(Eletromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. section 8 : test 11h : sand and dust.) |
NF C93-400-11-9-2002 |
电子设备连接器.试验和测量.第11-9部分:气候试验.试验11i:干热 |
(Connectors for electronic equipment - Tests and measurements - Part 11-9 : climatic tests - Test 11i : dry heat.) |
NF C93-400-12-6-1997 |
电子设备用机电件.基本试验过程和测量方法.第12部分:焊接试验.第6节:试验12f:防熔密封和机械焊接中的清洗 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 12 : soldering tests. Section 6 : test 12f : sealing against flux and cleaning solvents in machine soldering.) |
NF C93-400-12-7-2002 |
电子设备用连接器.试验和测量.第12-7部分: 软钎焊试验.试验 12g: 软钎焊性,润湿平衡法 |
(Connectors for electronic equipment - Tests and measurements - Part 12-7 : Soldering tests - Test 12g : solderability, wetting balance method.) |
NF C93-400-13-1-1997 |
电子设备用机电件.基本试验过程和测量方法.第13部分:机械运行试验.第1节:试验13a:啮合力及分离力 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 13 : mechanical operating tests. Section 1 : test 13a : engaging and separating forces.) |
NF C93-400-14-7-1998 |
电子设备的电机件.基本试验过程和测量方法.第14部分:密封试验.第7节:试验14G.撞击水 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 14 : sealing tests. Section 7 : test 14g : impacting water.) |
NF C93-400-15-8-1997 |
电子设备用机电件.基本试验过程和测量方法.第15部分:触点和终端的机械试验.第8节:试验15h:对所用工具有阻 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 15 : mechanichal tests on contacts and terminations. Section 8 : test 15h : contact retention system resistance to tool application.) |
NF C93-400-16-20-1997 |
电子设备用机电件.基本试验过程和测量方法.第16部分:触点和终端的机械试验.第20节:试验16t:机械强度(无焊 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 16 : mechanical tests on contacts and terminations. Section 20 : test 16t : mechanical strength (wired termination of solderless connections).) |
NF C93-400-19-3-1998 |
电子设备电机件.基本试验过程和测量方法.第19部分:化学抗性试验.第3节:试验19c:液流阻力 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 19 : chemical resistance tests. Section 3 : test 19c : fluid resistance.) |
NF C93-400-1985 |
电子器件.连接器件.基本试验方法和测量方法 |
(Electronic components. Connecting devices. Basic testing procedures and measuring methods.) |
NF C93-400-2-1-2002 |
电子设备连接器.试验和测量.第2-1部分:带电连续性和接触电阻试验.试验2a:接触电阻.毫伏法 |
(Connectors for electronic equipment - Tests and measurements - Part 2-1 : electrical continuity and contact resistance tests - Test 2a : contact resistance - Millivolt level method.) |
NF C93-400-2-2-2003 |
电子设备连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法 |
(Connectors for electronic equipment - Tests and measurements - Part 2-2 : electrical continuity and contact resistance tests - Test 2b : contact resistance - Specified test current method.) |
NF C93-400-2-3-2002 |
电子设备连接器.试验和测量.第2-3部分:带电连续性和接触电阻试验.试验2c:接触电阻变化 |
(Connectors for electronic equipment - Tests and measurements - Part 2-3 : electrical continuity and contact resistance tests - Test 2c : contact resistance variation.) |
NF C93-400-2-5-2003 |
电子设备连接器.试验和测量.第2-5部分:电连续性和接触电阻试验.试验2e:接触干扰 |
(Connectors for electronic equipment - Tests and measurements - Part 2-5 : electrical continuity and contact resistance tests - Test 2e : contact disturbance.) |
NF C93-400-2-6-2002 |
电子设备连接器.试验和测量.第2-6部分:带电连续性和接触电阻试验.试验2f:外壳带电连续性 |
(Connectors for electronic equipment - Tests and measurements - Part 2-6 : electrical continuity and contact resistance tests - Test 2f : housing (shell) electrical continuity.) |
NF C93-400-20-2-2001 |
电子设备的电机件.基本试验过程和测量方法.第20-2部分:试验:20b.燃烧性试验.阻燃性 |
(Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2 : test 20b - Flammability tests - Fireproofness.) |
NF C93-400-23-3-2001 |
电子设备用电机件.基本试验过程和测量方法.第23-3部分:试验23c.连接件和附属件的屏蔽效应 |
(Electromechanical components for elctronic equipment - Basic testing procedures and measuring methods - Part 23-3 : test 23c : shielding effectiveness of connectors and accessories.) |
NF C93-400-23-4-2002 |
电子设备用连接器.试验和测量.第23-4部分: 筛选和过滤试验.试验 23d: 时间域中的传输线路反射 |
(Connectors for electronic equipment - Tests and measurements - Part 23-4 : screening and filtering tests - Test 23d : transmission line reflections in the time domain.) |
NF C93-400-25-1-2002 |
电子设备用连接器.试验和测量.第25-1部分: 试验 25a:串音比 |
(Connectors for electronic equipment - Tests and measurements - Part 25-1 : test 25a - Crosstalk ratio.) |
NF C93-400-25-2-2002 |
电子设备连接器.试验和测量.第25-2部分:试验25b.衰减(介入损耗) |
(Connectors for electronic equipment - Tests and measurements - Part 25-2 : test 25b : attenuation (insertion loss).) |
NF C93-400-25-3-2002 |
电子设备用连接器.试验和测量.第25-3部分: 试验 25c:上升时间梯度 |
(Connectors for electronic equipment - Tests and measurement - Part 25-3 : test 25c - Rise time degradation.) |
NF C93-400-25-4-2002 |
电子设备用连接器.试验和测量.第25-4部分: 试验 25d:传播延迟 |
(Connectors for electronic equipment - Tests and measurements - Part 25-4 : test 25d - Propagation delay.) |
NF C93-400-3-1-2002 |
电子设备连接器.试验和测量.第3-1部分:绝缘试验.试验3a:绝缘电阻 |
(Connectors for electronic equipment - Tests and measurements - Part 3-1 : insulation tests - Test 3a : insulation resistance.) |
NF C93-400-4-1-2003 |
电子设备连接器.试验和测量.第4-1部分:电压应力试验.试验4a:耐电压 |
(Connectors for electronic equipment - Tests and measurements - Part 4-1 : voltage stress tests - Test 4a : voltage proof.) |
NF C93-400-4-2-2002 |
电子设备连接器.试验和测量.第4-2部分:电压应力试验.试验4b:部分放电 |
(Connectors for electronic equipment - Tests and measurements - Part 4-2 : voltage stress tests - Test 4b : partial discharge.) |
NF C93-400-4-3-2002 |
电子设备连接器.试验和测量.第4-3部分:电压应力试验.试验4c:预绝缘卷筒的电压检验 |
(Connectors for electronic equipment - Tests and measurements - Part 4-3 : voltage stress tests - Test 4c : voltage proof of pre-insulated crimp barrels.) |
NF C93-400-5-1-2002 |
电子设备连接器.试验和测量.第5-1部分:载流量试验.试验5a:升温 |
(Connectors for electronic equipment - Tests and measurements - Part 5-1 : current-carrying capacity tests - Test 5a : temperature rise.) |
NF C93-400-5-2-2002 |
电子设备连接器.试验和测量.第5-2部分:载流量试验.试验5b:电流-温度下降 |
(Connectors for electronic equipment - Tests and measurements - Part 5-2 : current-carrying capacity tests - Test 5b : current-temperature derating.) |
NF C93-400-6-1-2002 |
电子设备连接器.试验和测量.第6-1部分:动态应力试验.试验6a:稳态加速 |
(Connectors for electronic equipment - Tests and measurements - Part 6-1 : dynamic stress tests - Test 6a : acceleration, steady state.) |
NF C93-400-6-2-2002 |
电子设备连接器.试验和测量.第6-2部分:动态应力试验.试验6b:连续冲击 |
(Connectors for electronic equipment - Tests and measurements - Part 6-2 : dynamic stress tests - Test 6b : bump.) |
NF C93-400-6-3-2002 |
电子设备连接器.试验和测量.第6-3部分:动态应力试验.试验6c:冲击 |
(Connectors for electronic equipment - Tests and measurements - Part 6-3 : dynamic stress tests - Test 6c : shock.) |
NF C93-400-6-4-2002 |
电子设备连接器.试验和测量.第6-4部分:动态应力试验.试验6d:振动(正弦) |
(Connectors for electronic equipment - Tests and measurements - Part 6-4 : dynamic stress tests - Test 6d : vibration (sinusoidal).) |
NF C93-400-6-5-2000 |
电子设备用机电件.基本试验程序和测量方法.第6部分:动态应力试验.第5节:试验6e:随机振动 |
(Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6 : dynamic stress tests - Section 5 : test 6e : random vibration.) |
NF C93-400/A1-1988 |
NF C 93-400-1985的补充件1 |
() |
NF C93-4001-1988 |
C 93-400-85的补充1 |
() |
NF C93-401-1985 |
电子件.印制电路板的两部件连接和插入连接 |
(ELECTRONIC COMPONENTS. TWO PART AND EDGE SOCKET. CONNECTORS FOR PRINTED BOARD APPLICATION.) |
NF C93-403-101-1998 |
经质量评定的直流低频模拟和数字高速数据设备用连接器.第3部分:矩形连接器.第101节:连接在1.27mm X 2.54mm |
() |
NF C93-404-1988 |
电子件.微型葙支架 |
(ELECTRONIC COMPONENTS. CHIP CARRIER.) |
NF C93-406-001-1997 |
直流低频模拟设备和数字高速数据应用设备用已审定质量的连接器.第4部分:印制电路板连接器.第001节:空白详细 |
(Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.) |
NF C93-406-1-2002 |
有质量评定的直流低频模拟及数字高速数据应用系统用连接器.第1部分:总规范 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification.) |
NF C93-406-1/A1-2002 |
经质量评定的直流低频模拟及数字高速数据应用系统用连接器.第1部分:总规范.能力鉴定.修改件A1 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification - Capability approval.) |
NF C93-406-1/A2-2002 |
经质量评定的直流低频模拟设备及数字高速数据设备用连接器.第1部分:总规范.能力鉴定.修改件A2 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification - Capability approval.) |
NF C93-406-102-1998 |
直流低频率模拟设备和高速数据应用设备用经质量评定的连接器.第4部分:印制电路板联接器.第102节:带前定心,编码和预配合部件的米制多用途插件用双部分单极联接器的祥细规格102 : detail specification for two-part single-pole connectors, for multiple uses on plug-in uni |
Connectors with assessed quality for use in D.C., low-frequency analogue and in digital high speed data applications. Part 4 : printed board connectors. Section 102 : detail specification for two-part single-pole connectors, for multiple uses on plug-in u |
NF C93-406-2-001-2002 |
电气设备连接器.第2-001部分:圆形连接器.空白详细规范 |
(Connectors for electronic equipment - Part 2-001 : circular connectors - Blank detail specification.) |
NF C93-406-2-102-2002 |
电子设备连接器.第2-102部分:经质量评定的圆形连接器.外部低电压电源用插头和插座的分规范 |
(Connectors for electronic equipment - Part 2-102 : circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply.) |
NF C93-406-2-1999 |
直流低频模拟设备和高速数字数据应用设备用连接器.第2部分:已评定质量的圆形连接器.分规范 |
(Connectors for use in d.c. low-frequency analogue and digital high-speed data applications. Part 2 : circular connectors with assessed quality. Sectional specification.) |
NF C93-406-3-001-2000 |
直流低频模拟设备和高速数字数据应用设备用连接器.第3-001部分:经质量评定的矩形连接器.空白详细规范 |
(Connectors for use in d.c., low-frequency ananlogue and digital high-speed data applications - Part 3-001 : rectangular connectors with assessed quality - Blank detail specification.) |
NF C93-406-3-100-2000 |
直流低频模拟设备和高速数字数据应用设备用连接器.第3-100部分:经质量评定的矩形连接器.用梯形外罩和1.27MM |
() |
NF C93-406-3-2000 |
直流低频模拟设备和高速数字数据应用设备用连接器.第3部分:经质量评定的矩形连接器.分规范 |
(Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3 : rectangular connectors with assessed quality - Sectional specification.) |
NF C93-406-4-100-2002 |
电子设备连接器.第4-100部分:已评定质量的印制板连接器.印制电路板和底板用的栅极为2,5mm的两段连接器组件 |
(Connectors for electronic equipment - Part 4-100 : printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and b) |
NF C93-406-4-101-2002 |
电子设备连接器.第4-101部分:经质量评定的印制电路板连接器.带有符合IEC 60917的印制电路板和底板用2,0mm的 |
(Connectors for electronic equipment - Part 4-101 : printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed board) |
NF C93-406-4-103-1999 |
直流低频模拟电路和高速数据传输数字电路的连接器.第4-103部分:有质量评定的印制板连接器.有屏蔽罩及基本网 |
(Connecxtors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103 : printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm.) |
NF C93-406-4-104-1999 |
直流低频模拟设备和高速数据应用设备用连接器.第4-104部分:经质量评定的印制板连接器.带0.5mm多格栅终端的2 |
() |
NF C93-406-4-105-1999 |
直流低频率模拟设备和高速数据应用设备用经质量评定的连接器.第4部分:印制电路用连接器.第105节:用途广泛的 |
() |
NF C93-406-4-107-2002 |
电子设备用连接器.第4-107部分:经质量评定的印制板连接器.固定部分有印制板用焊接和压入端子、活动部分有不 |
() |
NF C93-406-4-110-2002 |
电子设备用连接器.第4-110部分: 具有质量评定的印刷板连接器.包括全屏蔽和闭锁功能的带2.0mm基本网格的闭锁 |
(Connectors for electronic equipment - Part 4-110 : printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full) |
NF C93-406-4-2002 |
有质量评定的直流低频模拟及数字高速数据应用系统用连接器.第4部分:印制板连接器分规范 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4 : sectionnal specification - Printed board connectors.) |
NF C93-406-5-2002 |
直流低频模拟及数字高速数据应用系统用连接器. 第5部分:具有质量评定的在线插座.分规范 |
(Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5 : in-line sockets with assessed quality - Sectional specification.) |
NF C93-406-7-2001 |
直流低频模拟设备和高速数据应用设备用的连接器.第7部分:经质量评定(包括资格和能力认可)的电缆输出附件.分 |
(Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7 : cable outlet accessories with assessed quality, including qualification and capability approval -) |
NF C93-407-17-1999 |
频率低于3MHz的连接器.第17部分:可充电电池用可多向插合的互连器件的详细规范 |
(Connectors for frequencies below 3 MHz - Part 17 : detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries.) |
NF C93-407-9-2001 |
低于3MHz的射频连接器.第9部分:无线电及相关音响设备用的圆形连接器 |
(Connectors for frequencies below 3 MHz - Part 9 : circular connectors for radio and associated sound equipment.) |
NF C93-410-1983 |
电子设备用机电件.质量保证.手动断路器.一般标准 |
(ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENTS. MANUALY ACTIVATED SWITCHES. GENERIC SPECIFICATION.) |
NF C93-411-1983 |
电子设备用机电件.按钮开关.过渡标准 |
(ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENTS. PUSH BUTTON SWITCHES. SECTIONAL SPECIFICATION.) |