标准号 |
中文名称 |
英文名称 |
| NF A89-700-2-2000 |
焊接.电子束焊接机的认可检验.第2部分:加速电压特性的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 2 : measurement of accelerating voltage characteristics.) |
| NF A89-700-3-2000 |
焊接.电子束焊接机的认可检验.第3部分:电子束电流特性的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 3 : measurement of beam current characteristics.) |
| NF A89-700-4-2000 |
焊接.电子束焊接机的认可检验.第4部分:焊接速度的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 4 : measurement of welding speed.) |
| NF A89-700-5-2000 |
焊接.电子束焊接机的认可检验.第5部分:电子束放出精确度的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 5 : measurement of run-out accuracy.) |
| NF A89-700-6-2000 |
焊接.电子束焊接机的认可检验.第6部分:焊点位稳定性的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 6 : measurement of stabilitry of spot position.) |
| NF A89-701-1-2003 |
CO2激光切割、焊接机的验收试验.第1部分:通用原理和验收条件 |
(Acceptance tests for CO2-laser beam machines for welding and cutting - Part 1 : general principles, acceptance conditions.) |
| NF A89-701-2-2003 |
CO2激光切割、焊接机的验收试验.第2部分:静态和动态准确度的测定 |
(Acceptance tests for CO2-laser beam machines for welding and cutting - Part 2 : measurement of static and dynamic accuracy.) |
| NF A89-701-3-2003 |
CO2激光切割、焊接机的验收试验.第3部分:气体流量和压力测量仪的校准 |
(Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.) |
| NF A89-750-1-2003 |
焊接.与焊接和相关工艺有关的底漆的试验.第1部分:一般要求 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 1 : general requirements.) |
| NF A89-750-2-2003 |
焊接.与焊接和相关工艺有关的底漆的试验.第2部分:底漆的焊接特性 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 2 : welding properties of shop primers.) |
| NF A89-750-3-2003 |
焊接.与焊接和相关工艺有关的底漆的试验.第3部分:热切割 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 3 : thermal cutting.) |
| NF A89-750-4-2003 |
焊接.与焊接和相关工艺有关的底漆的试验.第4部分:烟气排放 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 4 : emission of fumes and gases.) |
| NF A89-810-1-1999 |
热塑性半成品的焊接接头试验.第1部分:弯曲试验. |
(Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.) |
| NF A89-810-3-2000 |
热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验. |
(Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.) |
| NF A89-810-4-2002 |
热塑性半成品的焊接接头试验.第4部分:剥离试验 |
(Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.) |
| NF A89-810-5-2000 |
热塑半成品焊接接头的试验.第5部分:宏观检验 |
(Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.) |
| NF A89-810-7-2003 |
热塑性半成品焊接接头的试验.第7部分:腰形试验样品的抗拉试验 |
(Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.) |
| NF A89-810-8-2002 |
热塑性半成品的焊接接头试验.第8部分:要求 |
(Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.) |
| NF A91-001-2000 |
金属和合金防腐蚀.表面处理、金属和其他无机镀层.词汇. |
(Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary.) |
| NF A91-010-1984 |
金属镀层和表面处理.术语.分类.符号 |
(Metallic coatings and surface treatments of metals. Terminology. Classification. Symbols.) |
| NF A91-012-1977 |
金属镀层.易损件的金属镀层保护 |
(METALLIC COATINGS. WEAR PARTS PROTECTED BY METALLIC COATINGS.) |
| NF A91-023-2001 |
金属基质上金属和其他无机覆层腐蚀试验方法.经受腐蚀试验的试样和制成品的额定值 |
(Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests.) |
| NF A91-050-1998 |
金属防腐蚀.电镀涂层.确定一般规范的方法 |
(CORROSION PROTECTION OF METALS. ELECTRODEPOSITED COATINGS. METHOD OF SPECIFYING GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 1403).) |
| NF A91-052-2000 |
金属防腐蚀.铁或钢上辅助处理的锌电镀涂层 |
(Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel.) |
| NF A91-053-2000 |
金属防腐蚀.铁或钢上的镉电镀涂层 |
(Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel.) |
| NF A91-080-1987 |
金属镀层.锡电镀层.规范和试验方法 |
(Metallic coatings. Electroplated coatings of tin. Specification and test methods.) |
| NF A91-081-1987 |
金属镀层.锡镍合金电镀层.规范和试验方法 |
(Metallic coatings. Electroplated coatings of tin-nickel alloy. Specification and test methods.) |
| NF A91-082-1987 |
金属镀层.锡铅合金电解沉淀.规范和试验方法 |
(METALLIC COATINGS. ELECTROPLATED COATINGS OF TIN-LEAD ALLOYS. SPECIFICATION AND TEST METHODS.) |
| NF A91-091-1987 |
金属镀层.工业用的银和银合金电解沉淀 |
(Metallic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes.) |
| NF A91-092-1-1987 |
金属镀层.电解银和电解合金镀层的试验方法.第1部分:镀层厚度的测定 |
(Metallic coatings. Test methods for electrodeposited silver and silver alloys coatings. Part 1 : determination of coating thickness.) |
| NF A91-092-2-1987 |
金属镀层.电解银和电解合金镀层的试验方法.第2部分:粘附试验 |
(Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 2 : adhesion tests.) |
| NF A91-094-1987 |
金属镀层.工业用金和镀金合金电镀层 |
(Metallic coatings. Electrodeposited gold and gold alloy coatings for engineering purposes.) |
| NF A91-095-1-1987 |
金属镀层.金和金合金镀层试验方法:第1部分:镀层厚度的测定 |
(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : determination of coating thickness.) |
| NF A91-095-2-1987 |
金属镀层.金和金合金镀层试验方法:第2部分:环境试验 |
(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : environmental tests.) |
| NF A91-095-3-1995 |
金属镀层.金及金合金电镀层的试验方法.第3部分:孔隙率的阳极电解试验 |
(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 3 : electrographic tests for porosity.) |
| NF A91-095-4-1987 |
金属镀层.金和金合金镀层试验方法:第4部分:金含量的测定 |
(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 4 : determination of gold content.) |
| NF A91-095-5-1987 |
金属镀层.金和金合金镀层试验方法:第5部分:粘附试验 |
(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 5 : adhesion tests.) |
| NF A91-095-6-1995 |
金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定 |
(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 6 : determination of the presence of residual salts.) |
| NF A91-101-2000 |
金属防腐蚀.镍、镍铬、铜镍、铜镍铬电解沉积物覆层 |
(Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium.) |
| NF A91-103-1969 |
金属镀层.镀镍和镀铬的锌合金零件的验收条件 |
(Metallic coatings. Acceptance conditions for nickel- and chromium-plated zinc alloy parts.) |
| NF A91-104-2000 |
金属覆层和其它无机物覆层.有关厚度测量的定义和惯例 |
(Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness.) |
| NF A91-105-2003 |
金属覆层.自动催化(无电)的镍磷合金覆层.规范和试验方法 |
(Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods.) |
| NF A91-107-1995 |
金属镀层.延展性的测量方法述评 |
(METALLIC COATINGS. REVIEW OF METHODS OF MEASUREMENT OF DUCTILITY. (EUROPEAN STANDARD EN ISO 8401).) |
| NF A91-108-1995 |
金属镀层.镀层厚度的测量.扫描电子显微镜法 |
(Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.) |
| NF A91-109-1995 |
金属和其他无机物涂层.厚度测量方法述评 |
(Metallic and other non-organic coatings. Review of methods of measurement of thickness.) |
| NF A91-109-2003 |
金属和其他无机物覆层.厚度测量方法述评 |
(Metallic and other inorganic coatings - Review of methods of measurement of thickness.) |
| NF A91-110-1995 |
金属和氧化物镀层.镀层厚度的测定.显微镜法 |
(Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.) |
| NF A91-111-1995 |
金属镀层.镀层厚度的测量.阳极分解的电量计法 |
(Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution.) |
| NF A91-112-1995 |
磁性基质的非磁性镀层.镀层厚度的测量.磁性法 |
(Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method.) |
| NF A91-113-1995 |
非磁性基体金属上的非导体镀层.镀层厚度的测量.涡流法 |
(Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method.) |
| NF A91-114-1995 |
金属镀层.镀层厚度的测量.表面光法度轮廓仪法 |
(Metallic coatings. Measurement of coating thickness. Profilometric method.) |
| NF A91-116-2001 |
金属镀层.镀层厚度的测定.X射线光谱测定法 |
(Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods.) |
| NF A91-117-1995 |
金属和其他无机物涂层.涂层厚度的测量.菲索(Fizeau)多光束干涉仪法 |
(Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method.) |
| NF A91-118-2002 |
冶金和其他非有机镀层.维氏硬度计和努氏显微硬度试验机 |
(Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.) |
| NF A91-119-1981 |
铬电解镀层.电解腐蚀试验.(EC试验) |
(Electrodeposited chromium coatings. Electrolytic corrosion testing. (EC test).) |
| NF A91-120-1995 |
磁性和非磁性基质的镍电镀层.镀层厚度的测量.磁性法(欧洲标准EN ISO 2361) |
(Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method.) |
| NF A91-123-1995 |
金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量 |
(METALLIC COATINGS. HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS. GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA. (EUROPEAN STANDARD EN ISO 1460).) |
| NF A91-124-2002 |
金属镀层.热浸镀锌.粘结强度试验法 |
(Metallic coatings - Galvanization by immersion in molten zinc (hot-dip galvanizing) - Adhesion test methods.) |
| NF A91-125-2002 |
金属和其它无机覆层.单位面积质量的测量.重量法和化学分析方法概述 |
(Metallic coatings and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods.) |
| NF A91-131-1962 |
热镀锌钢丝.锌镀层的规范 |
(HOT-GALVANIZED STEEL WIRE. ZINC COATING SPECIFICATION.) |
| NF A91-140-1995 |
金属基质上的金属镀层.电镀层和化学沉积层.试验附着力的方法述评 |
(METALLIC COATINGS ON METALLIC SUBSTRATES. ELECTRODEPOSITED AND CHEMICALLY DEPOSITED COATINGS. REVIEW OF METHODS AVAILABLE FOR TESTING ADHESION. (EUROPEAN STANDARD EN ISO 2819).) |
| NF A91-142-2003 |
金属和其他无机覆层.通过抗拉试验定量测量粘性的方法 |
(Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test.) |
| NF A91-144-2003 |
金属和其他无机覆层.定义和外观约定 |
(Metallic and other inorganic coatings - Definitions and conventions concerning appearance.) |
| NF A91-146-1997 |
金属覆层.孔隙率检验复审 |
(METALLIC COATINGS. REVIEW OF POROSITY TESTS. (EUROPEAN STANDARD EN ISO 10308).) |
| NF A91-147-2003 |
金属和其他无机覆层.有关孔隙率的定义和约定 |
(Metallic and other inorganic coatings - Definitions and conventions concerning porosity.) |
| NF A91-148-1998 |
金属镀层.孔隙试验.潮湿硫试验. |
(METALLIC COATINGS. POROSITY TESTS. HUMID SULFUR (FLOWERS OF SULFUR) TEST. (EUROPEAN STANDARD EN ISO 12687).) |
| NF A91-149-2001 |
金属镀层.孔隙试验.电图记录金属基质上金和钯涂层的孔隙度 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.) |
| NF A91-150-2001 |
金属镀层.孔隙试验.通过亚硫酸和二氧化硫蒸气的金和钯涂层的孔隙度 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour.) |
| NF A91-200-1994 |
热喷涂.术语、分类 |
(Thermal spraying. Terminology, classification.) |
| NF A91-206-2001 |
金属和非金属覆层.厚度的测量.β反向散射法 |
(Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method.) |
| NF A91-211-1994 |
热喷涂层的试验.胶粘剂抗拉强度的测定 |
(THERMAL SPRAYING. DETERMINATION OF TENSILE ADHESIVE STRENGTH. (EUROPEAN STANDARD EN 582).) |
| NF A91-212-1996 |
热喷涂.热喷涂设备的验收检验 |
(THERMAL SPRAYING. ACCEPTANCE INSPECTION OF THERMAL SPRAYING EQUIPMENT. (EUROPEAN STANDARD EN 1395).) |
| NF A91-213-1996 |
热喷涂.粉末.合成物.技术供应条件 |
(THERMAL SPRAYING. POWDERS. COMPOSITION. TECHNICAL SUPPLY CONDITIONS. (EUROPEAN STANDARD EN 1274).) |
| NF A91-214-1999 |
热喷镀.自熔化合金的熔化和喷镀(EN ISO 14920) |
(Thermal spraying. Spraying and fusing of self-fluxing alloys.) |
| NF A91-215-2002 |
热喷涂.工程件用热喷镀涂层的应用程序 |
(Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components.) |
| NF A91-219-2002 |
热喷涂.熔喷和电弧喷涂用线材、杆材和软线.分类.技术支持条件 |
(Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions.) |
| NF A91-220-2003 |
热喷镀.热喷镀层的特征和检验 |
(Thermal spraying - Characterization and testing of thermally sprayed coatings.) |
| NF A91-221-1998 |
热喷涂.热喷涂器鉴定试验 |
(Thermal spraying. Approval testing of thermal sprayers.) |
| NF A91-222-2001 |
热喷涂.热喷涂配合.任务和责任 |
(Thermal spraying - Thermal spray coordination - Tasks and responsabilities.) |
| NF A91-223-1-1999 |
热喷镀.热喷镀结构的质量要求.第1部分:选择和使用导则 |
(THERMAL SPRAYING. QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES. PART 1 : GUIDANCE FOR SELECTION AND USE. (EUROPEAN STANDARD EN ISO 14922-1).) |
| NF A91-223-2-1999 |
热喷镀.热喷镀结构的质量要求.第2部分:综合质量要求 |
(THERMAL SPRAYING. QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES. PART 2 : COMPREHENSIVE QUALITY REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14922-2).) |
| NF A91-223-3-1999 |
热喷镀.热喷镀结构的质量要求.第3部分:标准质量要求 |
(THERMAL SPRAYING. QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES. PART 3 : STANDARD QUALITY REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14922-3).) |
| NF A91-223-4-1999 |
热喷镀.热喷镀结构的质量要求.第4部分:基本质量要求 |
(THERMAL SPRAYING. QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES. PART 4 : ELEMENTARY QUALITY REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14922-4).) |
| NF A91-224-2001 |
热喷涂.热喷涂用金属零部件的表面预处理 |
(Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying.) |
| NF A91-225-2004 |
热喷涂.高温下防腐蚀和氧化涂层 |
(Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures.) |
| NF A91-400-1987 |
表面处理.铝及铝合金的阳极极处理.词汇 |
(Anodizing of aluminium and its alloys. Vocabulary.) |
| NF A91-401-1966 |
金属表面处理.铝和铝合金的阳极处理.(阳极氧化).试验方法的名称 |
(SURFACE TREATMENT OF METALS. ANODISATION (ANODIC OXIDATION) OF ALUMINIUM AND ITS ALLOYS. NOMENCLATURE OF TEST METHODS.) |
| NF A91-402-1981 |
铝和铝合金的阳极处理.(阳极氧化).厚度的测量.剖面的显微照相 |
(Surface treatments of metals. Anodic oxidation of aluminium and its alloys. Thickness measurements.) |
| NF A91-404-1966 |
金属表面处理.铝和铝合金的阳极处理.(阳极氧化).厚度的测量 |
(SURFACE TREATMENT OF METALS. ANODIZING (ANODIC OXYDIZING) OF ALUMINIUM AND ITS ALLOYS. MEASUREMENT OF THICKNESS.) |
| NF A91-407-1981 |
铝和铝合金的阳极处理.(阳极氧化).通过测量在酸溶液浸泡后重量的损失来进行积砂的检验 |
(Anodizing of aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution.) |
| NF A91-408-1985 |
铝和阳极化的铝合金.沉砂检验.SANODALG兰滴定试验 |
(Anodized aluminium and aluminium alloys. Assessment of sealing quality. Sanodal “G“ blue drop test.) |
| NF A91-411-1966 |
金属表面处理.铝和铝合金的阳极处理.耐腐蚀的检验 |
(SURFACE TREATMENT OF METALS. ANODISATION (ANODIC OXIDATION) OF ALUMINIUM AND ITS ALLOYS. CHECK OF CORROSION RESISTANCE.) |
| NF A91-412-1982 |
铝和铝合金的阳极处理.彩色氧化层耐人造光的加速试验 |
(Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxide coatings to artificial light.) |
| NF A91-420-1988 |
表面处理.阳极氧化铝和铝合金.45°镜面反射率.总反射率.成象清晰度 |
(Surface treatments. Anodized aluminium and aluminium alloys. Specular reflectance at 45 degrees. Total reflectance. Image clarity.) |
| NF A91-423-1988 |
表面处理.铝和阳极氧化的铝合金.总反射率的测定.光电反射计法 |
(Surface treatments. Anodized aluminium and aluminium alloys. Measurement of total reflectivity using a photoelectric reflectometer.) |
| NF A91-450-1981 |
铝及其合金的阳极氧化.铝的阳极氧化物镀层的一般规范 |
(Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium.) |
| NF A91-455-1-2001 |
铝及铝合金.阳极氧化.第1部分:铝上装饰和保护用阳极氧化覆层的规定方法 |
(Aluminium and aluminium alloys - Anodizing - Part 1 : method for specifying decorative and protective anodic oxidation coatings on aluminiurm.) |
| NF A91-455-10-1999 |
铝和铝合金.阳极化.第10部分:使用磨损喷射试验装置对阳极氧化物镀膜的主要特定磨损抗性的测定 |
(Aluminium and aluminium alloys. Anodizing. Part 10 : measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus.) |
| NF A91-455-11-2000 |
铝和铝合金.阳极化.第11部分:在20度、45度、60度或85度时测定阳极氧化物涂层的镜面反射和镜面毛重 |
(Aluminium and aluminium alloys - Anodizing - Part 11 : measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 o, 45 o, 60 o or 85 o.) |
| NF A91-455-12-2000 |
铝和铝合金.阳极化.第12部分:用集成球形仪器测量铝表面反射特性 |
(Aluminium and aluminium alloys - Anodizing - Part 12 : measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments.) |
| NF A91-455-13-2000 |
铝和铝合金.阳极化.第13部分:用滤光测角仪测量铝表面反射特性 |
(Aluminium and aluminium alloys - Anodizing - Part 13 : measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer.) |
| NF A91-455-14-2000 |
铝和铝合金.阳极化.第14部分:用肉眼确定阳极氧化物涂层的图像清晰度.图表比例尺法 |
(Aluminium and aluminium alloys - Anodizing - Part 14 : visual determination of image clarity of anodic oxidation coatings - Chart scale method.) |
| NF A91-455-15-2000 |
铝和铝合金.阳极化.第15部分:阳极氧化物涂层抗变形断裂的测定 |
(Aluminium and aluminium alloys - Anodizing - Part 15 : assessment of resistance of anodic oxidation coatings to cracking by deformation.) |
| NF A91-455-16-2001 |
铝及铝合金.阳极氧化.第16部分:阳极氧化覆层连续性检查.硫酸铜试验 |
(Aluminium and aluminium alloys - Anodizing - Part 16 : check for continuity of thin anodic oxydation coatings - Copper sulfate test.) |
| NF A91-455-17-2001 |
铝及铝合金.阳极氧化.第17部分:电介质击穿潜能的测定 |
(Aluminium and aluminium alloys - Anodizing - Part 17 : determination of electric breakdown potential.) |
| NF A91-455-18-2001 |
铝和铝合金.阳极氧化.第18部分:点腐蚀评定用额定值系统.图表法 |
(Aluminium and aluminium alloys - Anodizing - Part 18 : Rating system for the evaluation of pitting corrosion - Chart method.) |
| NF A91-455-19-2002 |
铝及铝合金.阳极氧化.第19部分:斑蚀评定的等级系统.格栅法 |
(Aluminium and aluminium alloys - Anodizing - Part 19 : rating system for the evaluation of pitting corrosion - Grid method.) |
| NF A91-455-2-1999 |
铝和铝合金.阳极化.第2部分:阳极氧化物镀膜单位面积质量的测定(表面密度).重量计法(欧洲标准EN 12373-2) |
(Aluminium and aluminium alloys. Anodizing. Part 2 : determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method.) |
| NF A91-455-3-1999 |
铝和铝合金.阳极化.第3部分:阳极氧化物镀膜厚度的测定.用分裂束显微镜的非损测量(欧洲标准EN 12373-3) |
(Aluminium and aluminium alloys. Anodizing. Part 3 : determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope.) |
| NF A91-455-5-1999 |
铝和铝合金.阳极化.第5部分:用验收测量的密封阳极氧化物镀膜质量评估(欧洲标准EN 12373-5) |
(Aluminium and aluminium alloys. Anodizing. Part 5 : assessment of quality of sealed anodic oxidation coatings by measurement of admittance.) |
| NF A91-455-6-1999 |
铝和铝合金.阳极化.第6部分:通过对未预先进行酸处理的浸入到磷酸/铬酸溶液中的质量损失的测量对密封阳极氧 |
(Aluminium and aluminium alloys. Anodizing. Part 6 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment.) |
| NF A91-455-7-2002 |
铝及铝合金.阳极氧化.第7部分:测量经过磷酸和铬酸溶液酸处理浸渍后的质量损失来评定密封阳极氧化覆层的质量 |
(Aluminium and aluminium alloys - Anodizing - Part 7 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solut) |
| NF A91-455-8-1999 |
铝和铝合金.阳极化.第8部分:紫外灯和有色阳极氧化物加热镀膜的相对固定性测定.(欧洲标准EN 12373-8) |
(Aluminium and aluminium alloys. Anodizing. Part 8 : determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings.) |
| NF A91-455-9-1999 |
铝和铝合金.阳极化.第9部分:使用磨擦轮磨损试验的阳极氧化物镀膜的磨损抗性和磨损指数的测定 |
(Aluminium and aluminium alloys. Anodizing. Part 9 : measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus.) |
| NF A91-460-2003 |
镀粉扩散渗镀.铁制品上的锌扩散涂层.规范 |
(Sherardizing - Zinc diffusion coatings on ferrous products - Specification.) |
| NF A91-461-2004 |
金属的防腐蚀.铁或钢件上的非电解镀锌薄涂层 |
(Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components.) |
| NF A91-472-1980 |
锌或镉电解沉积物的铬酸盐转化镀层.规范和试验方法 |
(Chromate conversion coatings on zinc or cadmium electrodeposits. Specifications and test methods.) |
| NF A91-473-2001 |
锌、镉、铝锌合金和锌铝合金的铬酸盐转化涂层.试验方法 |
(Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods.) |
| NF A91-474-2001 |
金属材料上的转化涂层.单位面积涂层质量的测定.重量分析法 |
(Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods.) |
| NF A91-475-2000 |
金属的磷酸盐转化涂层.规定要求的方法 |
(Phosphate conversion coatings of metals - Method of specifying requirements.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com