标准号 |
中文名称 |
英文名称 |
| NF T54-019-1995 |
塑料管道和导管系统.未增塑聚氯乙烯(PVC-U)管和配件.粘度值的测定和K值的计算的样品制备 |
(PLASTICS PIPING AND DUCTING SYSTEMS. PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE. (EUROPEAN STANDARD EN 922).) |
| NF T54-020-1995 |
塑料.未增塑聚氯乙烯管.冷却扩孔试验 |
(Plastics. Pipes made of light weight unplasticized polyvinyl chloride. Cold flaring test.) |
| NF T54-024-1994 |
塑料管道系统.热塑塑料管和配件.维卡软化点的测定 |
(PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).) |
| NF T54-025-1995 |
塑料管道系统.热塑塑料管.恒定低温度下耐内压性能的测定 |
(Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.) |
| NF T54-029-1981 |
塑料.未增塑聚氯乙烯模制接头.压力系列.规范 |
(Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.) |
| NF T54-036-1994 |
塑料管道和导管系统.注模热塑配件.热效应目视评定的试验方法 |
(Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.) |
| NF T54-037-1981 |
塑料.未增塑聚氯乙烯管道件.生活污水无压排放设备用密封圈接头.使 用特性 |
(Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.) |
| NF T54-038-1981 |
装配有压力管用密封圈的未增塑聚氯乙烯管和接头.尺寸特性 |
(Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Dimensional caracteristics.) |
| NF T54-039-1988 |
塑料.未增塑聚氯乙烯压力管用密封圈的固定接头.使用特性.规范 |
(Plastics. Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Fitness for use.) |
| NF T54-040-1977 |
塑料.未增塑聚氯乙烯模制配件.尺寸 |
(PLASTICS.MOULDED UN-PLASTICIZED FITTINGS.DIMENSIONS.) |
| NF T54-041-1994 |
塑料管道系统.压力管道用弹性密封圈型接头的热注塑料配件.耐无轴向力短暂内压力性能的试验方法 |
(Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.) |
| NF T54-042-1994 |
塑料管道系统.压力管道用溶剂-水泥胶合接头的注模承窝配件 |
(Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.) |
| NF T54-044-1978 |
塑料.聚乙烯管与接头.按标定密度和热融流动指数命名的聚乙烯的名称 |
(POLYETHYLENE (PE) PIPES AND FITTINGS. DESIGNATION OF POLYETHYLENE BASED ON NOMINAL DENSITY AND MELT FLOW INDEX.) |
| NF T54-045-1994 |
塑料管道和导管系统.压力管道系统用热注塑料配件.最大变形的挤撞试验法 |
(Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.) |
| NF T54-046-1978 |
低密度聚乙烯(PE-BD)管与配件.流体输送管的化学稳定性 |
(LOW DENSITY POLYETHYLENE (PE-BD) PIPES AND FITTINGS. CHEMICAL RESISTANCE WITH RESPECT TO FLUIDS TO BE CONVEYED.) |
| NF T54-048-1977 |
塑料.低密度聚乙烯管.物理试验用试样的制备 |
(PLASTICS. LOW DENSITY POLYETHYLENE PIPES. PREPARATION OF SPECIMENS FOR PHYSICAL TESTING.) |
| NF T54-049-1977 |
塑料.聚乙烯管.管状聚乙烯基准密度的计算 |
(EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF A PIPES.) |
| NF T54-050-1977 |
塑料.聚乙烯管.粒状聚乙烯基准密度的计算 |
(EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF GRANULATES.) |
| NF T54-051-1979 |
聚乙烯管道.机械接头的载荷减小.试验方法与规 |
(Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.) |
| NF T54-052-2001 |
人类饮用水输送用塑料管道系统.迁移评定.塑料管和配件及其接头迁移值的测定 |
(Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.) |
| NF T54-054-1997 |
塑料管道系统.未增塑聚氯乙烯端点负载轴承双插座连接件.当弯曲和受到内压时测定其防漏性和强度的试验方法 |
(Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.) |
| NF T54-059-1995 |
压力管道和配件用热塑性塑料.分类和名称与符号.总体设备的设计系数 |
(Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service (design) coefficient.) |
| NF T54-061-1978 |
聚丙烯(PP)管和配件.流体输送管的化学稳定性 |
(POLYPROPYLENE (PP) PIPES AND FITTINGS. CHEMICAL RESISTANCE WITH RESPECT TO FLUIDS TO BE CONVEYED.) |
| NF T54-062-1-1999 |
建筑物内污物和污水排放(低、高温)用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统规范 |
(Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
| NF T54-063-1-2003 |
供水用塑料管道系统.聚乙烯.第1部分:总则 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 1 : general.) |
| NF T54-063-1989 |
塑料.自来水网用的聚乙烯管子.规范和试验方法 |
(PLASTICS. POLYETHYLENE PIPES FOR DRINKING WATER SUPPLY NETWORKS. SPECIFICATIONS AND TEST METHODS.) |
| NF T54-063-2-2003 |
供水用塑料管道系统.聚乙烯.第2部分:管道 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-063-3-2003 |
供水用塑料管道系统.聚乙烯.第3部分:配件 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-063-4-2003 |
供水用塑料管道系统.聚乙烯(PE).第4部分:阀 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-063-5-2003 |
供水用塑料管道系统.聚乙烯.第5部分:系统适用性 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-064-1990 |
塑料.带紧箍的半离合器系统(吉可曼系统).公称压力PN6 |
(PLASTICS-HALF SYMMETRIC FITTING (GUILLEMIN SYSTEM) WITH LOCKING RING. NOMINAL PRESSURE PN 6.) |
| NF T54-065-1-2003 |
气体燃料的塑料管道供应系统.聚乙烯(PE).第1部分:总则 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.) |
| NF T54-065-2-2003 |
气体燃料的塑料管道供应系统.聚乙烯(PE).第2部分:管道 |
(Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.) |
| NF T54-065-3-2003 |
气体燃料的塑料管道供应系统.聚乙烯(PE).第3部分:配件 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-065-4-2003 |
气体燃料的塑料管道供应系统.聚乙烯(PE).第4部分:阀门 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-065-5-2003 |
气体燃料的塑料管道供应系统.聚乙烯(PE).第5部分:系统的配合 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-070-1978 |
高密度聚乙烯(PE-HD)管和配件.流体输送管的化学稳定性 |
(High density polyethelene (pe-hd) pipes and fittings. Chemical resistance with respect to fluids to be conveyed.) |
| NF T54-072-1981 |
塑料.“5”聚乙烯管.规范 |
(POLYETHYLENE PIPES “5“. SPECIFICATIONS.) |
| NF T54-075-1997 |
塑料管和管道系统.聚烯烃管和配件.氧化时间的测定(欧洲标准EN 728) |
(Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.) |
| NF T54-076-1992 |
塑料.聚乙烯塑料管道系统.标称外径125以上导管的耐缓慢龟裂性.试验方法 |
(Plastics. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter over 125. Test method.) |
| NF T54-077-1992 |
塑料.聚乙烯塑料管道系统.标称外径125及其以下导管的耐缓慢龟裂性.试验方法 |
(Plastic. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter up to 125. Test method.) |
| NF T54-078-1992 |
塑料.塑料管道系统用聚乙烯.极限应力强度因数的测定.试验方法 |
(Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.) |
| NF T54-080-2002 |
具有视觉特性的地下电缆和管线用塑料报警装置 |
(Plastics warning devices for underground cables and pipelines with visual characteristics.) |
| NF T54-081-1987 |
塑料.饮用水供给用未增塑聚氯乙烯管(PVC-U).作为杂质的镉和汞的可萃取性 |
(Plastics. Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply. Extractability of cadmium and mercury occurring as impurities.) |
| NF T54-082-1988 |
塑料.热固塑料阀.耐压和密封性试验 |
(PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.) |
| NF T54-083-1991 |
热塑料制阀门.转矩.试验方法.(欧洲标准EN 28233) |
(THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (EUROPEAN STANDARD EN 28233).) |
| NF T54-084-1991 |
热塑料制阀门.耐疲劳强度.试验方法.(欧洲标准EN 28659) |
(THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (EUROPEAN STANDARD EN 28659).) |
| NF T54-085-1988 |
塑料.液体压力管用网状线聚乙烯管.规范 |
(Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.) |
| NF T54-086-1990 |
塑料.地下灌溉用未增塑聚氯乙烯管.规格 |
(PLASTICS. UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U) FOR UNDERGROUND IRRIGATION. SPECIFICATIONS.) |
| NF T54-087-1993 |
塑料管道系统.交联聚乙烯(PE-X)管.溶剂萃取法测定交联度 |
(PLASTICS PIPING SYSTEMS. CROSSLINKED POLYETHYLENE (PE-X) PIPES. DETERMINATION OF DEGREE OF CROSSLINKING BY SOLVENT EXTRACTION. (EUROPEAN STANDARD EN 579).) |
| NF T54-090-1976 |
塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接头颜色 |
(PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.) |
| NF T54-095-1985 |
塑料.未增塑聚氯乙烯管件接头粘合溶剂.使用特性 |
(Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.) |
| NF T54-096-1985 |
塑料.未增塑聚氯乙烯管件装配用溶剂胶粘剂.适用性 |
(ADHESIVES WITH SOLVENTS FOR ASSEMBLY OF UNPLASTICIZED PVC PIPE ELEMENTS. SUITABILITY FOR USE.) |
| NF T54-097-1995 |
塑料管道系统.热塑管.耐连续吹风的试验方法 |
(Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.) |
| NF T54-099-1987 |
承压工业用热塑料管.耐化学因素和基本约束因素的测定.第1部分:聚烯烃管 |
(THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE. DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS. PART 1 : POLYOLEFIN PIPES.) |
| NF T54-100-1997 |
塑料管道系统.热塑阀门.外部送风后阀门完好性的测试方法 |
(Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.) |
| NF T54-101-1974 |
塑料.塑料板.外现和尺寸.检验方法 |
(PLASTIC SHEET. PRESENTATION AND DIMENSIONS. METHODS OF CONTROL.) |
| NF T54-103-1996 |
塑料.聚甲基丙烯酸甲酯双合板和三合板.试验方法 |
(PLASTICS. POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS. TEST METHODS. (EUROPEAN STANDARD EN ISO 12017).) |
| NF T54-104-1970 |
塑料.塑料膜.柔软性的评定.吊环法 |
(PLASTICS. SHEETS. ESTIMATE OF FLEXIBILITY. SUSPENDED LOOP METHOD.) |
| NF T54-105-1973 |
塑料.塑料膜.受热后尺寸变化的测定.KAOLIN床法 |
(PLASTICS SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. KAOLIN BED METHOD.) |
| NF T54-106-1980 |
塑料.薄膜.粘接的评定.剥离法 |
(Plastics. Sheets. Evaluation of the tendency to cohere. Peeling method.) |
| NF T54-107-1971 |
塑料.薄膜.抗撕断强度的测定（非多孔试验件） |
(PLASTICS. THIN SHEETS. DETERMINATION OF TEAR RESISTANCE (NON PERFORATED TEST PIECE).) |
| NF T54-108-1971 |
塑料.薄膜.抗撕断扩张强度的测定 |
(PLASTICS. THIN SHEETS. DETERMINATION OF RESISTANCE TO TEAR PROPAGATION.) |
| NF T54-109-1973 |
塑料.薄膜.自由击锤锥子法测定抗冲击强度.DART试验法 |
(PLASTICS. SHEETS. IMPACT RESISTANCE BY THE FREE FALLING DART METHOD.) |
| NF T54-110-1971 |
塑料.薄膜.不脆化常规极限温度测定.（扣环冲击） |
(PLASTICS. THIN SHEETS. DETERMINATION OF PLIABILITY LIMIT TEMPERATURE.(LOOPED TEST PIECE IMPACT TEST).) |
| NF T54-111-1971 |
塑料.聚乙烯透明塑料薄膜.通过对光线的扩散和传播计算测定混浊度 |
(TRANSPARENT SHEETS OF POLYETHYLENE. DETERMINATION OF THE HAZE.) |
| NF T54-112-1980 |
塑料.薄膜.滑动性的测定.摩擦系数的测定 |
(Plastics. Sheets. Determination of the slippage. Measuring the friction coefficients.) |
| NF T54-113-1971 |
塑料.薄膜.薄膜平展性的检验 |
(PLASTICS MATERIALS. THIN SHEET. INSPECTION OF THE EVENNESS.) |
| NF T54-115-1973 |
塑料.薄膜.受热后尺寸变化的测定.浸泡法 |
(PLASTIC SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. IMMERSION METHOD.) |
| NF T54-116-1973 |
塑料.薄膜.抗穿孔强度的测定.穿孔法 |
(PLASTIC. SHEETS. DETERMINATION OF RESISTANCE TO PERFORATION. PERFORAMETRE METHOD.) |
| NF T54-118-2001 |
塑料.在大气压力下薄膜和薄板的透气率的测定.测压法 |
(Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method.) |
| NF T54-119-1976 |
塑料.增塑聚氯乙烯塑料薄膜.高频焊接试验常规方法 |
(PLASTICS.PLASTICIZED PVC SHEETS. CONVENTIONAL TEST METHOD FOR HIGH FREQUENCY WELDING.) |
| NF T54-120-1976 |
塑料.薄膜.热焊接试验常规方法（热棒法） |
(PLASTICS. SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL WELDING. (HOT BAR METHOD.)) |
| NF T54-121-1976 |
塑料.聚乙烯薄膜.化学试剂和恒定拉力作用下焊缝抗裂强度 |
(PLASTICS. THIN POLYETHYLENE SHEETS. RESISTANCE TO SPLITTING OF WELDS UNDER TENSILE STRESS IN THE PRESENCE OF CHEMICAL AGENTS.) |
| NF T54-122-1976 |
塑料.薄膜.张力试验评定焊缝和或粘合质量 |
(PLASTICS. SHEETS. ASSESSMENT OF THE QUALITY OF A WELD OR BOND BETWEEN TWO SHEET ELEMENTS BY MEANS OF A TENSILE TEST.) |
| NF T54-123-1987 |
塑料.塑料薄膜.抗破裂强度的测定 |
(Plastics. Sheets. Determination of bursting strength.) |
| NF T54-124-1980 |
塑料薄膜和塑料片.印花特性 |
(PLASTICS SHEETS AND FILMS. IMPRESSIBILITY.) |
| NF T54-125-1993 |
塑料.聚乙烯,乙烯共聚物及其混合物制热缩性薄膜.收缩应力的测定.试验方法 |
(PLASTICS. HEATSHRINKABLE FILMS IN POLYETHYLENE, ETHYLEN COPOLYMERS AND THEIR MIXTURES. DETERMINATION OF THE SHRINKING AND CONTRACTION STRESSES. TEST METHOD.) |
| NF T54-140-1984 |
塑料.塑料片和塑料薄膜.抗撕裂强度的测定.第1部分:PANTALON撕裂法 |
(PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 1 : TROUSER TEAR METHOD.) |
| NF T54-141-1984 |
塑料.塑料片和塑料薄膜.抗撕裂强度的测定.第2部分:ELMENDORF法 |
(PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 2 : ELMENDORF METHOD.) |
| NF T54-150-1971 |
塑料.薄膜.卷轴内径 |
(PLASTICS MATERIALS. SHEET. WINDING MANDRELS. INTERNAL DIAMETERS.) |
| NF T54-190-2002 |
农业和园艺上使用的覆盖热塑薄膜 |
(Covering thermoplastic films for use in agriculture and horticulture.) |
| NF T54-191-1994 |
塑料.农业用薄膜.缠结标记用可延伸薄膜.使用可膨胀性的测定 |
(PLASTICS. FILMS FOR AGRICULTURAL USE. EXTENSIBLE THIN FILMS FOR TAPING AND SILAGE MAKING. DETERMINATION OF SWEETABILITY FOR USE.) |
| NF T54-192-2003 |
塑料.农业和园艺用塑料膜.安装和使用条件 |
(Plastics - Plastics films for agriculture and horticulture - Conditions for installation and use.) |
| NF T54-195-2000 |
塑料.农业土壤消毒用薄膜.溴代甲烷隔膜规范和试验方法 |
(Plastics - Films for agricultural soil desinfection - Specification for methyl bromide barrier films and test methods.) |
| NF T54-196-1-1997 |
塑料.可伸展薄膜.第1部分:可伸展薄膜特性测定的常规方法 |
(PLASTICS. STRETCHABLE FILMS. PART 1 : CONVENTIONAL METHOD FOR DETERMINING THE PROPERTIES OF STRETCHABLE FILMS.) |
| NF T54-196-2-1998 |
塑料.可伸展薄膜.第2部分:螺旋箍装箱用可伸展薄膜适合性测定 |
(PLASTICS. STRETCHABLE FILMS. PART 2 : DETERMINATION OF THE SUITABILITY FOR USE OF STRETCHABLE FILMS FOR HELICOID HOOP CASING.) |
| NF T54-202-2002 |
青储饲料热塑膜 |
(Silage thermoplastic films.) |
| NF T54-300-1-2003 |
普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第1部分:总则 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.) |
| NF T54-300-2-2003 |
普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第2部分:管道 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-300-3-2003 |
普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-300-4-2003 |
普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-300-5-2003 |
普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第5部分:系统的适用性 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-301-1-1991 |
饰面用高压层压板(HPL).热固性树脂板.第1部分:规格(欧洲标准 EN 438-1) |
(DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 1 : SPECIFICATIONS. (EUROPEAN STANDARD EN 438-1).) |
| NF T54-301-2-1991 |
饰面用高压层压板(HPL).热固性树脂板.第2部分:特性测定.(欧洲标准 EN 438-2) |
(DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 2 : DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN 438-2).) |
| NF T54-320-1979 |
饰面用层压板.高压饰面用层压板的加工指南(按照T54-301“S”型) |
(DECORATIVE LAMINATED SHEET. GUIDE TO THE PROCESSING OF HIGH PRESSURE DECORATIVE LAMINATED SHEETS. (TYPE “S“ T 54-301).) |
| NF T54-401-1-2003 |
塑料.聚甲基丙烯酸甲酯薄板材.类型、尺寸和特性.第1部分:浇注薄板材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1 : cast sheets.) |
| NF T54-401-2-1997 |
塑料.聚(甲基丙-烯酸甲酯)塑料薄片.类型,尺寸和性能.第2部分:熔压挤出薄片(EN ISO 7823-2) |
(Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Part 2 : melt-calendered extruded sheets.) |
| NF T54-401-2-2003 |
塑料.聚甲基丙烯酸甲酯薄板材.类型、尺寸和特性.第2部分:挤制薄板材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2 : extruded sheets.) |
| NF T54-402-1995 |
塑料.聚碳酸酯薄板材.类型、尺寸和特性 |
(PLASTICS. POLYCARBONATE SHEETS. TYPES, DIMENSIONS AND CHARACTERISTICS. (EUROPEAN STANDARD EN ISO 11963).) |
| NF T54-404-1999 |
聚乙烯(PE-HD)的挤压片材.要求和试验方法 |
(EXTRUDED SHEETS OF POLYETHYLENE (PE-HD). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 14632).) |
| NF T54-405-1-2002 |
外部用的未增塑的聚氯乙烯挤压或合成挤压产品.规范和试验方法.第1部分:固体墙聚氯乙烯板材 |
(Unplasticized poly(vinyl chloride) (PVC-U) extruded or coextruded profiles for outside use - Specifications and test methods - Part 1 : solid wall PVC-U.) |
| NF T54-406-1996 |
塑料.园艺温室用单个或复合墙板.联合规范和特殊特点.评估方法 |
(PLASTICS. SINGLE OR MULTIPLE WALL RIGID SHEETS FOR HORTICULTURAL GREENHOUSES. JOINT SPECIFICATIONS AND SPECIAL CHARACTERISTICS. ASSESSMENT METHODS.) |
| NF T54-407-1999 |
聚丙烯挤压片材(PP).要求和试验方法 |
(EXTRUDED SHEETS OF POLYPROPYLENE (PP). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 15013).) |
| NF T54-408-1999 |
冲击改良的聚苯乙烯(PS-I)的挤压片.要求和试验方法 |
(EXTRUDED SHEETS OF IMPACT-MODIFIED POLYSTYRENE (PS-I). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 14631).) |
| NF T54-412-2000 |
焊接热塑结构的特性值.热塑性设备设计用允许应力和模数的测定 |
(Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment.) |
| NF T54-422-2003 |
塑料.农业和园艺用热塑性塑料薄膜覆盖物 |
(Plastics - Mulching thermoplastic films for use in agriculture and horticulture.) |
| NF T54-503-1976 |
塑料.轻塑料制品.拉力性能的测定 |
(LIGHT PLASTICS PRODUCTS. DETERMINATION OF TENSILE PROPERTIES.) |
| NF T54-504-1976 |
塑料.轻塑料制品.弯曲试验 |
(LIGHT PLASTICS PRODUCTS. BENDING TEST.) |
| NF T54-505-1976 |
塑料.轻塑料制品.抗冲击强度试验 |
(LIGHT PLASTICS PRODUCTS. IMPACT RESISTANCE TEST.) |
| NF T54-601-1987 |
塑料夹层结构定义.机械特性的测定 |
(Plastics based sandwich structures. Determination of mechanical properties. Definitions.) |
| NF T54-602-1983 |
塑料夹层结构.垂直挤压试验 |
(PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR COMPRESSION TEST.) |
| NF T54-603-1983 |
塑料夹层结构.垂直拉力试验 |
(PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR TENSILE TEST.) |
| NF T54-604-1986 |
塑料夹层结构.火焰弯曲或无火焰弯曲纵向挤压试验 |
(Plastics based sandwich structures. Longitudinal compression test without or with buckling.) |
| NF T54-605-1983 |
塑料夹层结构.抗剪强度的测定 |
(PLASTICS BASED SANDWICH STRUCTURES. DETERMINATION OF SHEAR STRENGTH.) |
| NF T54-606-1987 |
塑料夹层结构.弯曲试验 |
(Plastics based sandwich structures. Bend test.) |
| NF T54-701-1988 |
塑料.热固树脂基层压板.规范 |
(PLASTICS. INDUSTRIAL LAMINATED SHEETS BASED ON THERMOSETTING RESINS. SPECIFICATION.) |
| NF T54-801-1992 |
塑料.自助餐厅托盘.规范和试验方法 |
(PLASTICS. TRAYS FOR SELF-SERVICE RESTAURANTS. SSPECIFICATION AND TEST METHODS.) |
| NF T54-803-1-1994 |
塑料.游泳池用增塑聚氯乙烯薄膜.规范和试验方法.第1部分:普通薄膜 |
(PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 1 : SIMPLE MEMBRANES.) |
| NF T54-803-2-1994 |
塑料.游泳池用增塑聚氯乙烯薄膜.规范和试验方法.第2部分:增强薄膜 |
(PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 2 : REINFORCED MEMBRANES.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com