标准号 |
中文名称 |
英文名称 |
| NF L43-626-2003 |
航空航天系列.60度钛合金TI-P64001球形管接头.拉力张线用转动螺套 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire.) |
| NF L43-627-2003 |
航空航天系列.60度钛合金TI-P64001球形管接头.焊接的90度弯头 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.) |
| NF L43-628-2003 |
航空航天系列.60度钛合金TI-P64001球形管接头.钢FE-PA13制拉力张线 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA13.) |
| NF L43-629-2003 |
航空航天系列.耐热钢制37度球形管接头.端部焊接的90度弯管接头.英制 |
(Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Elbow 90 o nipples, welded end - Inch series.) |
| NF L43-630-2003 |
航空航天系列.耐热钢制37度球形管接头.加螺纹直活管节.英制 |
(erospace series - Pipe coupling 37 o, spherical, in heat resisting steel - Straight unions, threaded - Inch series.) |
| NF L43-631-2003 |
航空航天系列.耐热钢制37度球形管接头.端部焊接的箍.英制 |
(Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - ferrules, welded end - Inch series.) |
| NF L43-632-2003 |
航空航天系列.耐热钢制37度管接头.管套组件.英制 |
(Aerospace series - Pipe coupling, 37 o, in heat resisting steel - Cap assemblies - Inch series.) |
| NF L43-633-2003 |
航空航天系列.耐热钢制37度球形管接头.端部焊接的三通接头.英制 |
(Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.) |
| NF L43-634-2003 |
航空航天系列.高达21000 kPa的37度球形管接头.英制.技术规范 |
(Aerospace series - Pipe coupling, 37 o, spherical, up to 21 000 kPa - Inch series - Technical specification.) |
| NF L43-635-2003 |
航空航天系列.耐热钢制焊接管接头.90度弯头.英制 |
(Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.) |
| NF L43-636-2003 |
航空航天系列.耐热钢制焊接管接头.减速器.英制 |
(Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.) |
| NF L43-637-2003 |
航空航天系列.耐热钢制焊接管接头.三通管.英制 |
(Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series.) |
| NF L43-711-1976 |
管道连接用Ｖ形法兰.外形尺寸 |
(V BAND COUPLINGS FOR DUCTING AND PIPING. PROFILE DIMENSIONS.) |
| NF L44-070-1979 |
空中加油.接头的尺寸特性和功能 |
(IN-FLIGHT REFUELLING EQUIPMENT. DIMENSIONAL AND FUNCTIONAL CHARACTERISTICS OF CONNECTIONS.) |
| NF L44-511-1985 |
飞机的地面供给.小流量接头 |
(Ground supply. Low flow connection.) |
| NF L44-512-1973 |
低压接头.ISO 米制螺纹剖面和BNAE公差 |
(AIRCRAFT GROUND SUPPLY. LOW PRESSURE CONNECTION. ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES. (RECH.).) |
| NF L44-514-1975 |
低压气动起动接头 |
(Low pressure compressed air starting connections.) |
| NF L44-515-1989 |
航空和航天流体装置里的供氧接头 |
(Aerospace. Gaseous oxygen replenishment for use in fluid systems (old type). Dimensions (inch series).) |
| NF L44-516-1979 |
液氧流入接头 |
(Liquid oxygen replenishment couplings.) |
| NF L44-517-1980 |
ISO 米制螺纹剖面和公差低压接头 |
(Low pressure connections, ISO metric thread profile and tolerances.) |
| NF L44-518-1990 |
机舱地面增压试验用接头 |
(Aircraft. Ground pressure testing connections for pressure cabins. Dimensions (inch series).) |
| NF L44-519-1984 |
氧气面罩和氧气源的接头 |
(Joints for connecting crew member`S regulators masks to oxygen sources.) |
| NF L44-520-1974 |
空调用２００mm接头 |
(200 mm air-conditioning connections.) |
| NF L44-521-1974 |
空调用１３０mm接头 |
(130 mm air-conditioning connections.) |
| NF L44-532-1977 |
飞机地面给养.加压饮用水源接头 |
(AIRCRAFT GROUND SUPPLY. CONNECTIONS FOR DRINKING WATER SUPPLIED UNDER PRESSURE.) |
| NF L44-540-1974 |
甲醇水压力供水接头.标定尺寸19mm |
(Water-methanol pressure connections. Nominal dimension 19 mm.) |
| NF L44-541-1974 |
甲醇水压力供水接头.标定尺寸38mm |
(Water-methanol pressure connections. Nominal dimension 38 mm.) |
| NF L44-550-1978 |
润滑油压力注入接头 |
(Pressure re-oiling connection.) |
| NF L44-570-1980 |
飞机地面给养.燃料加压注入接头 |
(Aircraft ground supply. Pressure refuelling connections.) |
| NF L44-615-1989 |
航空和航天.液体系统用的液态氧的.注入接头尺寸(英制) |
(Aerospace. Gaseous oxygen replenishment for use in fluid systems (new type). Dimensions (inch series).) |
| NF L45-101-1987 |
航空和航天.液力、压力补偿或变量输送泵.一般要求 |
(Aerospace. Hydraulic, pressure compensated, variable delivery pumps. General requirements.) |
| NF L45-201-1991 |
航空和航天.恒排量液压马达.总规范 |
(Aerospace. Constant displacement hydraulic motors. General specifications.) |
| NF L46-012-1986 |
环形接头.６４Ｃ８氧烃橡胶.精确度Ａ验.质量分类 |
(O-RINGS. FLUOROCARBON RUBBER 64C8. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-013-1986 |
环形接头.２１Ａ７丙烯丁二烯--晴橡胶.精确度Ａ级.质量３级 |
(O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 21A7. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-014-1986 |
环形接头.２０Ａ８丙烯丁二烯－晴橡胶.精确度Ａ级.质量３级 |
(O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20A8. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-015-1987 |
环形接头.２０Ｂ８丙烯丁二烯- 晴橡胶.精确度Ａ级.性能３级 |
(O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20B8. PRECISION CLASS A. PERFORMANCE CLASS 3.) |
| NF L46-016-1987 |
环形接头.４１Ｂ８丁烯丙烯橡胶.精确度Ａ级.性能３级 |
(O-RINGS. ETHYLENE-PROPYLENE RUBBER 41B8. PRECISION CLASS A. PERFORMANCE CLASS 3.) |
| NF L46-017-1998 |
航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.硬度80 |
(Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD.) |
| NF L46-018-2002 |
航空航天系列.管连接件.温度范围:-55℃～ 135 ℃75 IRHD的晴基丁二烯橡胶(NBR)的O型密封圈 |
(Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, temperature range : - 55 oC to + 135 oC.) |
| NF L46-020-1998 |
航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.技术规范 |
(Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification.) |
| NF L46-021-2002 |
航空航天系列.O形密封环凹槽.尺寸 |
(Aerospace series - O-ring grooves - Dimensions.) |
| NF L46-056-1980 |
三角孔圆丝金属网 |
(WIRE GAUZE WITH TRIANGULAR APERTURES AND ROUND WIRES.) |
| NF L46-210-1989 |
航空和航天.流体装置用环形压板的制造尺寸 |
(AEROSPACE. “P“ CLAMPS (LOOP CLAMPS) FOR FLUID SYSTEMS. ENVELOPE DIMENSIONS.) |
| NF L46-211-1988 |
航空航天.流体系统用奥米加夹紧装置(骑马螺栓).尺寸 |
(AEROSPACE. OMEGA CLAMPS (SADDLE CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.) |
| NF L46-212-1988 |
航空航天.流体系统用奥米加夹紧装置(中心安装式).尺寸 |
(AEROSPACE. “Q CLAMPS“ (CENTRE-MOUNTED CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.) |
| NF L46-226-2002 |
航空航天系列.以橡胶垫层钝化的耐腐蚀钢制环形(P型)夹件.尺寸和质量 |
(Aerospace series - Clamps, loop (“P“ type) in corrosion resisting steel, passivated with rubber crushioning - Dimensions, masses.) |
| NF L46-227-2002 |
航空航天系列.有橡胶垫层的铝制环形(P形)夹件.尺寸和质量 |
(Aerospace series - Clamps, loop (“P“ type) in aluminium alloy with rubber cushioning - Dimensions, masses.) |
| NF L46-240-2002 |
航空航天系列.在铝合金中带橡胶垫的固定和移动式支架夹具.尺寸和重量 |
(Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses.) |
| NF L46-241-2002 |
航空航天系列.夹件用橡胶垫层.尺寸、质量 |
(Aerospace series - Cushion, rubber for clamps - Dimensions, masses.) |
| NF L46-250-1987 |
航空和航天.流体系统.管路轴线可调节压块.设计标准和合格试验.米制系列 |
(AEROSPACE. FLUID SYSTEMS. CLAMP BLOCKS FOR TUBE LINES HAVING AXIAL ALIGNMENT. DESIGN STANDARD AND QUALIFICATION TESTING. METRIC SERIES.) |
| NF L46-311-1966 |
飞行器的流体装置.螺纹密封塞.(RECH.) |
(AIRCRAFT FLUID INSTALLATIONS. SCREWED SEALING PLUGS. (RECH.).) |
| NF L46-313-1979 |
径向封塞.ISO 米制螺纹剖面和公差 |
(SCREWED SEALING PLUGS,RADIAL SEALING. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L46-315-1979 |
轴向密封塞.ISO 米制螺纹剖面和公差 |
(SCREWED SEALING PLUGS,AXIAL SEALING. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L46-322-1980 |
NFL ４０- １０４和类似型式接头阳螺纹端用金属保护外壳.ISO 米制螺纹剖面和公差 |
(PROTECTIVE,METALLIC,CAP,FOR NF L 40-104 MALE FITTINGS AND SIMILAR TYPES. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L46-323-1980 |
保护外壳用弹性垫圈 |
(FLAT ELASTOMER GASKETS FOR PROTECTIVE CAP.) |
| NF L46-331-2002 |
航空航天系列.8°30’钛合金管接头.压合栓 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Pressure plugs.) |
| NF L46-332-2002 |
航空航天系列.钛合金 8°30’管接头.带动态梁密封端的单头卡套 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Ferrules, blind, with dynamic beam seal end.) |
| NF L46-333-2002 |
航空航天系列.8°30’钛合金管连接件.带锁紧环的截止管 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Blanking plugs with lockring.) |
| NF L46-334-2002 |
航空航天系列.8°30’管接头.螺母防护帽 |
(Aerospace series - Pipe coupling 8 o30’ - Protective caps.) |
| NF L46-335-2002 |
航空航天系列.8°30’接头.外螺纹防护栓 |
(Aerospace series - Pipe coupling 8 o30’ - Protective plugs with external threads.) |
| NF L46-336-2002 |
航空航天系列.8°30’接头.内螺纹防护栓 |
(Aerospace series - Pipe coupling 8 o30’ - Protective caps with internal threads.) |
| NF L46-341-2002 |
航空航天系列.钛合金直通垫圈 |
(Aerospace series - Washers, bulkhead in titanium alloy.) |
| NF L46-342-2002 |
航空航天系列.焊接管用钛合金三通垫环 |
(Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure.) |
| NF L46-343-2002 |
航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压 |
(Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.) |
| NF L46-344-2002 |
航空航天系列.耐热钢垫圈 |
(Aerospace series - Washers in heat resisting steel.) |
| NF L46-614-2003 |
航空航天系列.合金钢FE-PA3903制弹簧张力夹 |
(Aerospace series - Clips, spring tension, in alloy steel FE-PA3903.) |
| NF L47-120-1949 |
飞行器的流体装置.贮存箱尺寸公差 |
(AIRCRAFT FLUID INSTALLATIONS. DIMENSIONAL TOLERANCES FOR TANKS.) |
| NF L48-105-1977 |
重力装油孔 |
(Gravity filling orifices.) |
| NF L48-110-1974 |
ISO米制螺纹剖面常用底座和BYAE公差.使用的互换性 |
(STANDARD FLANGES,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES. IN-SERVICE INTERCHANGEABILITY. (RECH.).) |
| NF L48-111-1973 |
使用的互换性.ISO米制螺纹剖面常用底座 |
(IN-SERVICE INTERCHANGEABILITY. STANDARD FLANGES,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L48-120-1948 |
飞机的流体装置.使用的互换性.注入口 |
(AIRCRAFT FLUID INSTALLATIONS. IN-SERVICE INTERCHANGEABILITY. REFUELLING FLANGES. (RECH.).) |
| NF L48-121-1948 |
飞机的流体装置.贮存箱设备.座口滤网和卡环 |
(AIRCRAFT FLUID INSTALLATIONS. TANK EQUIPMENT. FILTERS AND RETAINING RINGS.) |
| NF L48-125-1972 |
使用的互换性.入口.ISO 螺纹剖面和公差 |
(IN-SERVICE INTERCHANGEABILITY. REFUELLING FLANGES. (ISO THREAD PROFILE AND TOLERANCES).) |
| NF L48-130-1948 |
飞机的流体装置.使用的互换性.燃料计量器、燃料泵等的接管座 |
(AIRCRAFT FLUID INSTALLATIONS. IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (RECH.).) |
| NF L48-135-1972 |
燃料计量器、燃料泵等接头的使用互换性（ISO 螺纹剖面和公差） |
(IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (ISO THREAD PROFILE AND TOLERANCES).) |
| NF L48-210-1948 |
飞机的流体装置.防护贮存箱座口安装的互换性 |
(AIRCRAFT FLUID INSTALLATIONS. MOUNTING INTERCHANGEABILITY. FLANGES FOR REINFORCED TANKS. (RECH.).) |
| NF L48-215-1972 |
防护贮存箱座口装置的互换性.（ISO 螺纹剖面和公差） |
(MOUNTING INTERCHANGEABILITY. FLANGES FOR REINFORCED TANKS. (ISO THREAD PROFILE AND TOLERANCES).) |
| NF L50-001-1992 |
航空航天系列.飞行器电源特性 |
(AEROSPACE SERIES. CHARACTERISTICS OF AIRCRAFT ELECTRICAL SUPPLIES. (EUROPEAN STANDARD EN 2282).) |
| NF L50-050-1996 |
航空和航天.检验飞机上电缆的敷设 |
(AEROSPACE SERIES. TESTING OF AIRCRAFT WIRING. (EUROPEAN STANDARD EN 2283).) |
| NF L50-101-1977 |
电气器材连接的定位 |
(MARKING OF CONNECTIONS ON ELECTRICAL EQUIPMENT.) |
| NF L51-151-1979 |
直流发电机电压调器.底座安装和和外形尺寸 |
(VOLTAGE REGULATORS FOR DIRECT CURRENT GENERATORS. OVERALL DIMENSIONS AND METHOD OF FIXING OF BASE.) |
| NF L51-152-1980 |
Ａ型电压调整器 |
(VOLTAGE REGULATOR,TYPE A.) |
| NF L51-153-1980 |
Ｂ型电压调整器 |
(VOLTAGE REGULATOR,TYPE B.) |
| NF L51-154-1980 |
Ｃ型电压调整器 |
(VOLTAGE REGULATOR,TYPE C.) |
| NF L51-155-1975 |
差动电流继电器 |
(DIFFERENTIAL REVERSE CURRENT RELAYS.) |
| NF L51-156-1971 |
逆向电流继电器 |
(CIRCUIT-BREAKER WITH REVERSE CURRENT TRIP.) |
| NF L51-157-1966 |
飞行器电气设备.带馈线保护的差动反向电流继电器 |
(ELECTRICAL EQUIPMENT FOR AIRCRAFT. DIFFERENTIAL REVERSE CURRENT RELAYS WITH FEEDER PROTECTION.) |
| NF L51-158-1966 |
飞行器电气设备.单电源的冲击性过压保护装置 |
(ELECTRICAL EQUIPMENT FOR AIRCRAFT. VOLTAGE SURGE PROTECTION FOR ONE POWER SOURCE.) |
| NF L51-159-1966 |
飞行器电气设备.多路电源的冲击性过压保护装置 |
(ELECTRICAL EQUIPMENT FOR AIRCRAFT. VOLTAGE SURGE PROTECTION FOR SEVERAL POWER SOURCES.) |
| NF L51-160-1966 |
飞行器电气设备.直流发电机馈线保护箱 |
(ELECTRICAL EQUIPMENT FOR AIRCRAFT. FEEDER PROTECTION HOUSING FOR DIRECT CURRENT GENERATOR.) |
| NF L51-412-1972 |
机载变流器.Ⅰ型 |
(ELECTRIC CONVERTORS FOR AIRCRAFT. TYPE I.) |
| NF L51-413-1971 |
机载变流器.Ⅱ型 |
(ELECTRIC CONVERTORS FOR AIRCRAFT. TYPE II.) |
| NF L51-414-1974 |
机载变流器.Ⅲ型 |
(Electric convertors for aircraft. Type III.) |
| NF L51-510-1966 |
飞行器电气设备.交流冲击探测器 |
(ELECTRICAL EQUIPMENT FOR AIRCRAFT. ALTERNATING CURRENT SURGE DETECTORS.) |
| NF L51-520-1966 |
飞行器电气设备.交流网络控制和保护箱 |
(ELECTRICAL EQUIPMENT FOR AIRCRAFT. HOUSINGS FOR CONTROLS AND PROTECTION OF ALTERNATING NETWORKS.) |
| NF L51-525-1966 |
飞行器电气设备.控制和保险箱底座 |
(ELECTRICAL EQUIPMENT FOR AIRCRAFT. SEATING FOR CONTROL AND PROTECTION HOUSINGS.) |
| NF L51-710-1966 |
飞行器用电动机.安装和驱动 |
(ELECTRIC MOTORS FOR AIRCRAFT. FIXING AND DRIVE.) |
| NF L52-120-1978 |
常规用途的铜芯电缆 |
(GENERAL PURPOSE ELECTRIC CABLES WITH COPPER CORE.) |
| NF L52-121-1978 |
常规用途的铜电缆 |
(GENERAL PURPOSE ELECTRIC CABLES WITH COPPER CONDUCTOR.) |
| NF L52-125-1978 |
高温用铜芯电缆 |
(HEAT-RESISTING ELECTRIC CABLES WITH COPPER CORE.) |
| NF L52-126-1978 |
高温用铜电缆 |
(Heat-resisting electric cables with copper conductor.) |
| NF L52-127-1978 |
耐火电缆 |
(Fire-resisting electric cables.) |
| NF L52-128-1978 |
耐火铜电缆 |
(Fire-resisting electric cables with copper conductor.) |
| NF L52-210-1966 |
接地线扁裸线 |
(FLAT METAL BRAID FOR METALLISATION.) |
| NF L52-215-1966 |
接地线圆裸线 |
(ROUND METAL BRAID FOR METALLISATION.) |
| NF L52-230-2001 |
航空航天系列.电缆用铜或铜合金导体.产品标准 |
(Aerospace series - Copper or copper alloy conductors for electrical cables - Product standard.) |
| NF L52-250-100-2002 |
航空航天系列.飞行器用电缆.试验方法.第100部分:总则 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100 : general.) |
| NF L52-250-201-2002 |
航空航天系列.飞行器用电缆.试验方法.第201部分:外观检查 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201 : visual examination.) |
| NF L52-250-202-2002 |
航空航天系列.飞行器用电缆.试验方法.第202部分:质量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202 : mass.) |
| NF L52-250-301-2002 |
航空航天系列.飞行器用电缆.试验方法.第301部分:每单位长度的欧姆律电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301 : ohmic resistance per unit length.) |
| NF L52-250-302-2002 |
航空航天系列.飞行器用电缆.试验方法.第302部分:电压验算试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 302 : voltage proof test.) |
| NF L52-250-303-2002 |
航空航天系列.飞行器用电缆.试验方法.第303部分:绝缘电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303 : insulation resistance.) |
| NF L52-250-304-2002 |
航空航天系列.飞行器用电缆.试验方法.第304部分:表面电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304 : surface resistance.) |
| NF L52-250-305-2002 |
航空航天系列.飞行器用电缆.试验方法.第305部分:过载电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305 : overload resistance.) |
| NF L52-250-401-2002 |
航空航天系列.飞行器用电缆.试验方法.第401部分:加速老化 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 401 : accelerated ageing.) |
| NF L52-250-402-2002 |
航空航天系列.飞行器用电缆.试验方法.第402部分:收缩和剥离 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402 : shrinkage and delamination.) |
| NF L52-250-403-2002 |
航空航天系列.飞行器用电缆.试验方法.第403部分:剥离和粘连 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403 : delamination and blocking.) |
| NF L52-250-404-2002 |
航空航天系列.飞行器用电缆.试验方法.第404部分:热冲击 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404 : thermal shock.) |
| NF L52-250-405-2002 |
航空航天系列.飞行器用电缆.试验方法.第405部分:室温下的弯曲试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405 : bending at ambient temperature.) |
| NF L52-250-406-2002 |
航空航天系列.飞行器用电缆.试验方法.第406部分:低温弯曲试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406 : cold bend test.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com