标准号 |
中文名称 |
英文名称 |
NF P19-829-2-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.新GRC清洗出法对纤维含量的测定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 2 : measuring the fibre content in fresh GRC, “Wash out test“.) |
NF P19-829-3-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.喷雾GRC纤维含量的测定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 3 : measuring the fibre content of sprayed GRC.) |
NF P19-829-4-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.简化弯曲实验法对弯曲强度的测定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, “Simplified bending test“ method.) |
NF P19-829-5-1998 |
预制混凝土产品.玻璃纤维增强水泥的试验方法.第5部分:弯曲强度的试验.完全弯曲试验方法 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, “Complete bending test“ method.) |
NF P19-829-6-1998 |
预制混凝土产品.玻璃纤维增强水泥的试验方法.第6部分:干密度测定和浸入法水吸收的测定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 6 : determination of the absorption of water by immersion and determination of the dry density.) |
NF P19-829-7-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.第7部分:随潮湿含量尺寸变化的极限测量 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 7 : measurement of extremes of dimensional variations due to moisture content.) |
NF P20-102-1963 |
框架.细木工.木材词汇 |
(FRAMEWORK. JOINERY. WOOD VOCABULARY.) |
NF P20-301-1970 |
木作.钳工制品.锅炉房和类似房间用门 |
(JOINERY. LOCKSMITHERY. DOORS OF BOILERHOUSES AND SIMILAR PREMISES.) |
NF P20-302-2002 |
窗户的特性 |
(Characteristics of windows.) |
NF P20-311-1982 |
防盗门及其附件的技术规范 |
(TECHNICAL SPECIFICATIONS FOR DOOR URITS FITTED WITH THEIR ACCESSORIES TO WITHSTAND BREAK-INS BY VIOLENT MEANS.) |
NF P20-401-1944 |
框架.木作.钳工制品.法国式窗扇和窗框尺寸 |
(FRAMEWORKS JOINERY. LOCKSMITHING. DIMENSIONS OF FRENCH WINDOW SASHES AND CASEMENTS.) |
NF P20-501-2002 |
窗户的试验方法 |
(Test methods for windows.) |
NF P20-502-2000 |
窗户和门.透气性.试验方法 |
(Windows and doors - Air permeability - Test method.) |
NF P20-503-2000 |
窗户和门.防风.试验方法 |
(Windows and doors - Resistance to wind load - Test method.) |
NF P20-504-1977 |
窗的试验方法.试验报告格式 |
(METHODS OF TESTING WINDOWS. FORM OF TEST REPORT. (EUROPEAN STANDARD EN 78).) |
NF P20-505-2000 |
窗户和门.防水.试验方法 |
(Windows and doors - Watertightness - Test method.) |
NF P20-506-1981 |
窗的试验方法.机械试验 |
(Methods of testing windows. Mechanical tests.) |
NF P20-507-2000 |
门和窗.空气透过性.分级 |
(Windows and doors - Air permeability - Classification.) |
NF P20-508-2000 |
门和窗.对风阻力的承受能力.分类 |
(Windows and doors - Resistance to wind load - Classification.) |
NF P20-509-2000 |
门和窗.水紧性.分级 |
(Windows and doors - Watertightness - Classification.) |
NF P20-512-1999 |
门活页.高度,宽度,厚度,矩形面积的测量方法 |
(Door leaves. Method for measurement of height, width, thickness and squareness.) |
NF P20-513-2000 |
门扇.在连续不变气候条件下门扇抗湿度变化的性能的测定 |
(Door leaves - Determination of the behaviour under humidity variations in successive uniform climates.) |
NF P20-514-2000 |
门.在两种不同气候间的门扇的性能.试验方法 |
(Doors - Behaviour between two different climates - Test method.) |
NF P20-515-2000 |
门扇.耐硬物体冲击的测定 |
(Door leaves - Determination of the resistance to hard body impact.) |
NF P20-516-1999 |
高或枢轴门.垂直负载抗性的测定(欧州标准EN 947) |
(Hinged or pivoted doors. Determination of the resistance to vertical load.) |
NF P20-517-2000 |
铰链门或支枢式门.门扇静态扭转的测定 |
(Hinged or pivoted doors - Determination of the resistance to static torsion.) |
NF P20-518-1984 |
门的试验方法.门扇硬度重复扭曲试验 |
(METHODS OF TESTING DOORS. TEST FOR THE CHANGE IN STIFFNESS OF THE DOOR LEAVES BY REPEATED TORSION. (EUROPEAN STANDARD EN 130).) |
NF P20-519-1983 |
门.门扇振动试验 |
(Doors. Impact test on the lead.) |
NF P20-521-1983 |
门.门扇配接板条的连接的平面剪切试验 |
(Doors. Shearing test.) |
NF P20-522-1983 |
门.门扇下部冷水浸泡试验 |
(Doors. Test of the lower part of the door leaf by immersion in cold water.) |
NF P20-523-1983 |
门.门扇抗湿热性能试验 |
(Doors. Testing the behaviour of door leaves subjected to climatic influences.) |
NF P20-524-1983 |
门.螺订拔起试验 |
(Doors. Screw wrenching test.) |
NF P20-525-1983 |
门.耐火试验 |
(Doors. Fire resistance test.) |
NF P20-526-1983 |
门.预涂漆试验 |
(Doors. Prepainting test.) |
NF P20-527-1999 |
窗户和窗帘墙壁,门,百叶窗和活动遮板.柔软和重的物体撞击门的抗性测定 |
(Windows and curtain walling, doors, blinds and shutters. Determination of the resistance to soft and heavy body impact for doors.) |
NF P20-528-2000 |
门和窗.对来回开关的耐性.试验方法 |
(Windows and doors - Resistance to repeated opening and closing - Test method.) |
NF P20-530-2000 |
门.强度要求的分级 |
(Doors - Classification of strength requirements.) |
NF P20-532-2000 |
操作力量.试验方法.第2部分:门 |
(Operating forces - Test method - Part 2 : doors.) |
NF P20-533-2000 |
门.气候影响.要求和分级 |
(Doors - Climatic influences - Requirements and classification.) |
NF P20-534-2003 |
窗户和人行门.机械耐久性.要求和分类 |
(Windows and pedestrian doors - Mechanical durability - Requirements and classification.) |
NF P20-538-2003 |
窗.软重物体的冲击.试验方法、安全要求和分类 |
(Windows - Soft and heavy body impact - Test method, safety requirements and classification.) |
NF P20-539-2001 |
窗.机械特性的分类.压力、扭力和操纵力 |
(Windows - Classification of machanical properties - Racking, torsion and operating forces.) |
NF P20-540-2001 |
门窗和遮板.耐爆炸性.要求和分类.第1部分:冲击管 |
(Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1 : shock tube.) |
NF P20-542-2001 |
门窗和遮板.耐爆炸性.试验方法.第1部分:冲击管 |
(Windows, doors and shutters - Explosion resistance - Test method - Part 1 : shock tube.) |
NF P20-551-1982 |
防盗门及其附件性能的测试方法 |
(METHODS OF TESTING THE CAPACITY OF DOOR UNTIS FITTED WITH THEIR ACCESSORIES TO WITHSTAND BREAK-INS BY VIOLETN MEANS.) |
NF P20-602-1999 |
窗、门、百叶窗.防弹性.要求和分类 |
(Windows, doors, shutters and blinds. Bullet resistance. Requirements and classification.) |
NF P20-603-1999 |
窗、门、百叶窗.防弹性.试验方法 |
(Windows, doors, shutters and blinds. Bullet resistance. Test method.) |
NF P20-604-2000 |
门扇.普通和局部平坦性.测量方法 |
(Door leaves - General and local flatness - Measurement method.) |
NF P20-605-2000 |
门扉.总体和局部平整度.公差级 |
(Door leaves - General and local flatness - Tolerance classes.) |
NF P20-606-2000 |
门扉.高度、宽度、厚度和垂直度.公差级 |
(Door leaves - Height, width, thickness and squareness - Tolerance classes.) |
NF P21-203-1-1993 |
建筑工程.木材结构框架及楼梯.第1部分:技术规范 |
(DTU 31-1. BUILDING WORKS. TIMBER FRAMEWORKS AND STAIRS. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P21-203-1/A1-1998 |
DTU 31.1.修改件1 |
() |
NF P21-203-1/A2-2002 |
DTU 31.1.建筑工程.木材骨架和楼梯.第1部分:技术规范 |
(DTU 31.1 - Building works - Timber frameworks and stairs - Part 1 : technical specifications.) |
NF P21-203-11-1998 |
NF P 21-203-1补充件1 |
() |
NF P21-203-2-1993 |
建筑工程.私人合同.木构架工程和木结构楼梯.第2部分:特别条款 |
(DTU 31-1. BUILDING WORKS. PRIVATE CONTRACTS. TIMBER FRAMEWORKS AND STAIRS. PART 2 : SPECIAL CLAUSES.) |
NF P21-203-2/A1-2002 |
DTU 31.1.建筑工程.私人合同.木材骨架和楼梯.第2部分:专用条款 |
(DTU 31.1 - Building works - Private contracts - Timber frameworks and stairs - Part 2 : special clauses.) |
NF P21-204-1-1993 |
DTU 31-2.建筑物.原木房屋和建筑物结构.第1部分:技术规范 |
(DTU 31-2. BUILDING WORKS. TIMBERFRAME HOUSES AND BUILDINGS CONSTRUCTION. PART 1 : TECHNICAL SPECIFICATIONS.) |
NF P21-204-1/A1-1998 |
DTU 31.2修改件1 |
() |
NF P21-204-11-1998 |
NF P 21-204-1补充件1 |
() |
NF P21-204-2-1993 |
DTU 31-2.建筑工程.私人合同.木构架房屋和建筑施工.第2部分:特别条款 |
(DTU 31-2. BUILDING WORKS. PRIVATE CONTRACTS. TIMBERFRAME HOUSES AND BUILDINGS CONSTRUCTION. PART 2 : SPECIAL CLAUSES.) |
NF P21-205-1-1995 |
DTU31.3.与金属板紧固件和联接板相关的木结构框架.第1部分:建筑规则 |
(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 1 : CONSTRUCTION RULES.) |
NF P21-205-2-1995 |
DTU31.3.与金属板紧固件或联接板相关的木材结构.第2部分:设计规则 |
(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 2 : DESIGN RULES.) |
NF P21-205-3-1995 |
DTU31.3.与金属板紧固件和联接板相关的木结构框架.第3部分:特别规范手册 |
(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 3 : PARTICULAR SPECIFICATIONS BOOK.) |
NF P21-210-1993 |
木梯.术语 |
(WOODEN STAIRS. TERMINOLOGY.) |
NF P21-211-1993 |
木梯.规范 |
(WOODEN STAIRS. SPECIFICATIONS.) |
NF P21-300-1993 |
木材构件.试验方法.静态负荷试验总则 |
(TIMBER STRUCTURES. TEST METHODS. GENERAL PRINCIPLES FOR STATIC LOAD TESTING. (EUROPEAN STANDARD EN 380).) |
NF P21-301-1998 |
木材结构.建筑用木材和胶合板.垂直于纹理的机械特性和剪切强度的测定 |
(Timber structures. Structural timber and glued laminated timber. Determination of shear strength and mechanical properties perpendicular to the grain.) |
NF P21-302-1995 |
木结构.结构木材和胶合板.某些物理性能和机械性能的测定 |
(Timber structures. Structural timber and glued laminated timber. Determination of som physical and mechanical properties.) |
NF P21-303-1993 |
木材构件.试验方法.暗销形紧固件基座值和嵌入强度测定 |
(TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF EMBEDDING STRENGTH AND FOUNDATION VALUES FOR DOWEL TYPE FASTENERS. (EUROPEAN STANDARD EN 383).) |
NF P21-304-1996 |
木结构.测定结构机械特性用木基护墙板的试验 |
(Timber structures. Test methods. Determination of mechanical properties of wood based paned.) |
NF P21-305-1995 |
木基板材.机械特性和密度的特性值的测定 |
(Wood-based panels. Determination of characteristic values of mechanical properties and density.) |
NF P21-310-1991 |
木结构.通过机械固定件进行组装.测定强度和变形特性的一般原则.(欧洲标准EN 26891) |
(TIMBER STRUCTURES. JOINTS MADE WITH MECHANICAL FASTENERS. GENERAL PRINCIPLES FOR THE DETERMINATION OF STRENGTH AND DEFORMATION CHARACTERISTICS. (EUROPEAN STANDARD EN 26891).) |
NF P21-312-1999 |
木结构.试验方法.用穿孔金属板紧固件进行组装 |
(Timber structures - Test methods - Joints made with punched metal plate fasteners.) |
NF P21-313-1991 |
木结构.通过机械连接装置进行组装试验.有关木头密度的要求 |
(TIMBER STRUCTURES. TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS. REQUIREMENTS FOR WOOD DENSITY. (EUROPEAN STANDARD EN 28970).) |
NF P21-351-2003 |
结构木材.尺寸和允许偏差 |
(Structural timber - Sizes, permitted deviations.) |
NF P21-352-1995 |
胶合木板.尺寸、充许偏差 |
(Glued laminated timber. Sizes. Permissible deviations.) |
NF P21-353-2003 |
结构木材.强度等级 |
(Structural timber - Strength classes.) |
NF P21-354-1999 |
结构木材.胶合木材.强度分级和特征值测定 |
(Timber structures. Glued laminated timber. Strength classes and determination of characteristic values.) |
NF P21-357-1995 |
建筑用木料.分级.目检强度分级标准的要求 |
(Structural timber. Grading. Requirements for visual strength grading standards.) |
NF P21-358-1995 |
木结构.机械性能和密度特征值的测定 |
(Structural timber. Determination of characteristic values of mechanical properties and density.) |
NF P21-359-1995 |
建筑用木料.分级.机械强度、分级木料和分级机的要求 |
(Structural timber. Grading. Requirements for machine strength graded timber and grading machines.) |
NF P21-360-2002 |
指接结构木材.性能要求和最低生产要求 |
(Finger jointed structural timber - Performance requirements and minimum production requirements.) |
NF P21-370-2002 |
胶合木板.性能要求和最低生产要求 |
(Glued laminated timber - Performance requirements and minimum production requirements.) |
NF P21-371-2002 |
胶合木板.胶粘层的剥离试验 |
(Glued laminated timber - Delamination test of glue lines.) |
NF P21-372-1995 |
胶合木板.胶粘线抗剪试验 |
(Glued laminated timber. Shear test of glue lines.) |
NF P21-373-2002 |
粘胶层压板材.大指接件.性能要求和最低生产要求 |
(Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements.) |
NF P21-374-1995 |
木结构.木框架墙的软体冲击试验 |
(Timber structures. Test methods. Soft body impact test of timber framed walls.) |
NF P21-380-2002 |
木结构.试验方法.机械紧固件用接头的循环试验 |
(Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners.) |
NF P21-381-1995 |
木结构.试验方法.测定强度和变形特性用桁架的试验 |
(Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour.) |
NF P21-382-1996 |
木结构.试验方法.结构墙板剥离强度和刚度的试验 |
(Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels.) |
NF P21-383-1998 |
木材结构.试验方法.木地板的结构性能 |
(TIMBER STRUCTURES. TEST METHODS. PERFORMANCE OF STRUCTURAL FLOOR DECKING. (EUROPEAN STANDARD EN 1195).) |
NF P21-384-1993 |
木材构件.试验方法.暗销形紧固件屈服力矩.钉子 |
(TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF THE YIELD MOMENT OF DOWEL TYPE FASTENERS. NAILS. (EUROPEAN STANDARD EN 409).) |
NF P21-385-1999 |
木紧固件.木连接件规范 |
(Timber fasteners - Specifications for connectors for timber.) |
NF P21-388-2002 |
木质紧固件.负载电容器的特性和连接件的滑动系数 |
(Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints.) |
NF P21-390-2002 |
架空线用原木杆.试验方法.测定弹性模量、弯曲强度、密度和含水量 |
(Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content.) |
NF P21-391-2002 |
架空线用木杆.强度分级标准 |
(Wood poles for overhead lines - Strength grading criteria.) |
NF P21-392-2002 |
架空线用木杆.尺寸.测量方法和允许偏差 |
(Wood poles for overhead lines - Sizes - Methods for measurement and permissible deviations.) |
NF P21-393-2002 |
架空线用木杆.特征值的测定 |
(Wood poles for overhead lines - Determination for characteristic values.) |
NF P21-394-2002 |
架空线用木杆.耐久性要求 |
(Wood poles for overhead lines - Durability requirements.) |
NF P21-395-1998 |
结构木材.强度分级.可视级和样品分配. |
(Structural timber. Strength classes. Assignment of visual grades and species.) |
NF P21-400-2003 |
结构木材和木制品.阻力条款和相关允许应力 |
(Structural timber and wood-based products - Resistance clauses and related permissible stresses.) |
NF P22-202-1-1993 |
DTU 32-2.建筑工程.金属结构件.铝合金框架.第1部分:技术规范 |
(DTU 32-2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.) |
NF P22-202-1/A1-2000 |
DTU 32.2 建筑工程.金属构架.铝合金框架.第1部分:技术规范 |
(DTU 32.2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.) |
NF P22-202-2-1993 |
DTU 32-2. 建筑工程.私人合同.金属结构.铝合金制门窗框.第2部分:特殊条款 |
(DTU 32-2. BUILDING WORKS. PRIVATE CONTRACTS. METAL CONSTRUCTION. ALUMINIUM ALLOYS FRAMEWORK. PART 2 : SPECIAL CLAUSES.) |
NF P22-250-1978 |
金属结构件.圆形空心型材交叉切割焊接件.焊接件设计和鉴定 |
(METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS. DESIGN AND INSPECTION.) |
NF P22-251-1978 |
金属结构件.圆形空心型材交叉切割焊接件.构造规定 |
(METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.CONSTRUCTION.) |
NF P22-252-1978 |
金属结构件.圆形空心型材焊接件 |
(METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.) |
NF P22-255-1979 |
金属结构件.圆形或矩形空心型材I或H型焊接件.设计和检验 |
(METAL CONSTRUCTION. HOLLOW SECTION WELDED ASSEMBLIES ON TYPE I AND H SECTIONS. DESIGN AND VERIFICATION.) |
NF P22-258-1982 |
金属结构件.静态负荷下空心型材和矩形空心型材焊接件.设计和检验 |
(WELDED ASSEMBLIES OF HOLLOW SECTIONS AND RECTANGULAR HOLLOW SECTIONS SUBJECTED TO STATIC LOADING. DESIGN AND VERIFICATION.) |
NF P22-410-1982 |
金属结构.铆接.构件.铆钉的设计 |
(Metal construction. Riveted assemblies. Conditions of construction. Design of rivets.) |
NF P22-411-1978 |
金属结构件.铆订连接.铆接施工 |
(METAL CONSTRUCTION. RIVETED ASSEMBLIES. EXECUTION OF ASSEMBLIES.) |
NF P22-430-1982 |
金属结构.非预应力螺栓连接.构件及螺栓的设计 |
(Metal construction. Assembly by non-prestressed bolts. Conditions of construction and design of the bolts.) |
NF P22-431-1978 |
金属结构.非预应力螺栓连接.连接施工 |
(METAL CONSTRUCTION. ASSEMBLY BY NON PRESTRESSED BOLTS. EXECUTION OF ASSEMBLIES.) |
NF P22-460-1979 |
金属结构.可控拉紧螺栓连接.构造规定和螺栓计算 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. STRUCTURES REQUIREMENTS AND CHECKING OF JOINTING.) |
NF P22-461-1979 |
金属结构.可控拉紧螺栓连接.常规摩擦系数测定 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. DETERMINAITON OF THE CONVENTIONAL COEFFICIENT OF FRICTION.) |
NF P22-462-1978 |
金属结构.可控拉紧螺栓连接.连接件制造和准备 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. FABRICATION AND PREPARATION OF JOINTS.) |
NF P22-463-1978 |
金属结构.可控拉紧螺栓连接.连接施工 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. EXECUTION OF JOINTS.) |
NF P22-466-1979 |
金属结构.可控拉紧螺栓连接.螺栓拉紧和检验方法 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. METHODS OF TIGHTENING AND CHECKING OF BOLTS.) |
NF P22-468-1987 |
金属结构.可控拉紧螺栓连接.螺母控制旋转拉紧.旋转角测定 |
(Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.) |
NF P22-469-1978 |
金属结构.可控拉紧螺栓连接.扭力扳手校准 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. CALIBRATION OF TORQUE WRENCHES.) |