标准号 |
中文名称 |
英文名称 |
| NF T47-201-2002 |
橡胶,塑料软管和软管组件.尺寸的测量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions. |
| NF T47-202-1996 |
橡胶和塑料软管及软管组件.液压静力试验(欧洲标准EN ISO 1402) |
Rubber and plastics hoses and hose assemblies. Hydrostatic testing. |
| NF T47-203-2002 |
橡胶或塑料软管.弯曲试验 |
Rubber or plastics hoses - Bending tests. |
| NF T47-204-1969 |
橡胶.合成橡胶管或软管.用浸渍或接触法测定管抗液体作用的能力 |
RUBBER AND SIMILAR ELASTOMERS. RESISTANCE OF TUBES AND PIPES TO THE ACTION OF LIQUIDS BY CONTACT OR IMMERSION. (TESTING METHODS). |
| NF T47-205-1993 |
橡胶和塑料软管.静态条件下的耐臭氧性试验的评定 |
Rubber and platics hoses. Assessment of ozone resistance under static conditions. |
| NF T47-206-1982 |
橡胶和塑料.管和软管的外径、厚度和同心度的测量 |
RUBBER OR PLASTICS BASED HOSES. MEASUREMENTS OF EXTERNAL DIAMETERS WALL THICKNESSES AND CONCENTRICITY. |
| NF T47-208-1996 |
橡胶软管.外皮的抗磨性测定 |
Rubber hoses - Determination of abrasion resistance of the outer cover. |
| NF T47-208/A1-2000 |
橡胶软管.外皮抗磨性的测定 |
(Rubber hoses - Determination of abrasion resistance of the outer cover.) |
| NF T47-209-1996 |
橡胶和塑料软管.衬里耐磨性测定 |
Rubber and plastics hoses. Determination of abrasion of lining. |
| NF T47-210-1998 |
橡胶和塑料软管.暴露在氙弧灯下的试验.颜色和外观变化的测定 |
Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance. |
| NF T47-214-1998 |
橡胶和塑料软管.易燃烧性试验方法 |
Rubber and plastics hoses. Method of test for flammability. |
| NF T47-215-1995 |
橡胶和塑料软管.稳定状态下抗紫外线的测定 |
RUBBER AND PLASTICS HOSES. DETERMINATION OF ULTRA-VIOLET RESISTANCE UNDER STATIC CONDITIONS. (EUROPEAN STANDARD EN ISO 8580). |
| NF T47-217-1995 |
橡胶和塑料软管及软管组件.透气性测定 |
Rubber and plastics hoses and hose assemblies. Determination of permeability to gas. |
| NF T47-218-1996 |
橡胶和塑料软管.在动力条件下耐臭氧性的评定(欧洲标准EN ISO 10960) |
RUBBER AND PLASTICS HOSES. ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS. (EUROPEAN STANDARD EN ISO 10960). |
| NF T47-220-1994 |
气焊接设备.焊接、切割和有关工艺用橡胶软管 |
Gas welding equipment. Rubber hoses for welding, cutting and allied processes. |
| NF T47-220-2003 |
气焊机.焊接、切割和相关工艺用橡胶软管 |
(Gas welding equipment - Rubber hoses for welding, cutting and allied processes.) |
| NF T47-221-1996 |
气焊设备.焊接和相关工艺用热塑管 |
Gas welding equipment. Thermoplastic hoses for welding and allied processes. |
| NF T47-250-2003 |
烃类、溶剂和化学制品输送用热塑性多层(未硫化)软管和软管组件的规范 |
(Thermoplastic multi-layer (non vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification.) |
| NF T47-251-1-1997 |
橡胶和塑料软管和软管组件.试验压力和爆破压力与设计工作压力的比值 |
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES. RATIOS OF PROOF AND BURST PRESSURE TO DESIGN WORKING PRESSURE. (EUROPEAN STANDARD EN ISO 7751). |
| NF T47-251-1996 |
工业通用橡胶和塑料软管.孔直径和公差.长度公差 |
Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length. |
| NF T47-252-1997 |
压缩空气用纺织材料增强的橡胶软管规范 |
Rubber hose, textile-reinforced, for compressed air. Specification. |
| NF T47-253-1997 |
普通供水用纺织材料增强的橡胶软管规范 |
Rubber hoses, textile-reinforced, for general purpose water applications. Specification. |
| NF T47-254-2000 |
压缩空气织物增强塑料软管.规范 |
Plastic hoses, textile-reinforced, for compressed air - Specification. |
| NF T47-255-1997 |
测量过的燃料分配用橡胶软管和软管部件规范 |
Rubber hoses and hose assemblies for measured fuel dispensing. Specification. |
| NF T47-256-1996 |
输送无水氨用橡胶软管和软管组件(欧洲标准EN ISO 5771) |
Rubber hose and hose assemblies for transferring anhydrous ammonia. Specification. |
| NF T47-257-1997 |
普通供水用带织物加固内衬的塑料软管.规范 |
Plastics hoses, textile-reinforced, for general-purpose water applications. Specification. |
| NF T47-258-1993 |
吸水和排水用橡胶软管规范 |
Rubber hoses for water suction and discharge. Specification. |
| NF T47-259-1996 |
橡胶软管和软管组件.织物增强的液压型.规范 |
Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification. |
| NF T47-260-1978 |
橡胶和塑料.洗餐具机和洗衣机用排水管 |
RUBBER. DRAINAGE PIPES FOR DISHWASHERS AND WASHING MACHINES. |
| NF T47-262-2003 |
液化石油气和液化天然气输送用热塑性多层(未硫化)软管和软管组件的规范 |
(Thermoplastic multi-layer (non vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - specifications.) |
| NF T47-263-1986 |
橡胶软管.水蒸气循环用软管.特性 |
Rubber hoses for vapour circulation. Specifications. |
| NF T47-264-1995 |
输送蒸汽用橡胶软管.试验方法 |
(Rubber hoses for steam. Test methods.) |
| NF T47-265-2002 |
塑料软管.含水材料抽吸和排放用螺旋热塑增强热塑性软管.规范 |
(Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharghe of aqueous materials - Specification.) |
| NF T47-266-1999 |
加油车运输用橡胶软管和软管组件.规范 |
(RUBBER HOSES AND HOSE ASSEMBLIES FOR FUEL TRUCK DELIVERY. SPECIFICATION. (EUROPEAN STANDARD EN 1761).) |
| NF T47-268-1997 |
飞机加油用橡胶软管和软管组件.规范(EN I361) |
(Rubber hoses and hose assemblies for aviation fuel handling. Specification.) |
| NF T47-270-1997 |
橡胶软管和软管组件.液压型橡胶包皮螺旋金属线增强.规范 |
(Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification.) |
| NF T47-273-2002 |
无气涂漆用橡胶和/或塑料软管和软管组件.规范 |
(Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification.) |
| NF T47-274-1993 |
塑料软管.常规用途的可折叠水管, 织物增强.规格(欧洲标准EN 28029) |
(Plastics hose. General purpose collapsible water hose, textile reinforced. Specification.) |
| NF T47-275-1998 |
吸油管和排放设备用橡胶软管组件.组件规范 |
(Rubber hose assemblies for oil suction and discharge services. Specifications for the assemblies.) |
| NF T47-276-1997 |
喷沙和砂石用橡胶软管规范 |
(Rubber hoses for sand and grit blasting. Specification.) |
| NF T47-277-1996 |
用于油燃烧器的软管和软管组件.规范 |
(Rubber hoses and hose assemblies for use in oil burners. Specification.) |
| NF T47-280-1997 |
橡胶软管和软管组件.热塑料织物增强液力型.规范 |
PLASTICS HOSES AND HOSE ASSEMBLIES. THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE. SPECIFICATION. (EUROPEAN STANDARD EN 855). |
| NF T47-281-1997 |
橡胶软管和软管组件.液压型金属丝编织物增强.规范 |
Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification. |
| NF T47-282-2002 |
石油类液体的抽吸和低压出料用塑料软管和软管组件规范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquide - Specification. |
| NF T47-283-1999 |
液化石油气,达到25BAR(2,5MPa)LGP(液相或气相)的天然气用橡胶软管和软管组件.规范(欧洲标准EN 1762) |
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification. |
| NF T47-286-1998 |
橡胶或塑料软管和软管组件.无柔性液压脉冲试验.欧洲标准EN ISO 6803) |
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing. |
| NF T47-287-1996 |
橡胶和塑料软管和管系.软管和管壁的透液量的测定 |
RUBBER AND PLASTICS HOSES AND TUBING. DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS. (EUROPEAN STANDARD EN ISO 8308). |
| NF T47-288-1997 |
橡胶软管和软管组件.液压装置用小型金属丝编织物增强.规范 |
Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification. |
| NF T47-301-1972 |
橡胶.管道接头用压制和模制合成橡胶垫圈和型材.材料的一般特性 |
RUBBER MOLDED AND EXTRUDED SEALING RINGS AND PROFILES FOR PIPE WORK. GENERAL SPECIFICATIONS OF MATERIALS. |
| NF T47-302-1977 |
铺地面用混凝土板间预成形橡胶连接材料.特性 |
RUBBER BASED MATERIALS FOR PRE-FORMED JOINTS MADE BETWEEN CONCRETE FLAGS FOR FLOORING. CHARACTERISTICS. |
| NF T47-303-1977 |
铺地面用混凝土板间预成形橡胶连接材料.特性.飞机场跑道用连接材料 |
MATERIALS FOR RUBBER-BASED PRE-FORMED JOINTS FOR USE BETWEEN CONCRETE PAVING STONES. CHARACTERISTICS JOINTS FOR AIRPORT RUNWAYS. |
| NF T47-304-1983 |
增强橡胶伸缩套管.规范 |
REFORCED RUBBER COMPENSATING SLEEBES. |
| NF T47-305-1 1-1999 |
NF T47-305-1-96的补充件1 |
|
| NF T47-305-1-1996 |
弹性密封.排水设施用管接头密封用材料的要求.第1部分:硫化橡胶 |
Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications. Part 1 : vulcanized rubber. |
| NF T47-305-1/A1-1999 |
NF EN 681-1-1996的修改件1 |
|
| NF T47-305-1/A2-2003 |
弹性密封件.给水排水用管道连接密封件的材料要求.第1部分:硫化橡胶 |
Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 1 : vulcanized rubber. |
| NF T47-305-11-1999 |
NF T47-305-1-96的补充件1 |
() |
| NF T47-305-2-2000 |
弹性密封件.水和排水设施用管接头密封件材料的要求.第2部分:热塑性弹性材料 |
Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2 : thermoplastic elastomers. |
| NF T47-305-2/A1-2003 |
弹性密封件.给水排水用管道连接密封件的材料要求.第2部分:热塑弹性体 |
Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 2 : thermoplastic elastomers. |
| NF T47-305-3-2000 |
弹性密封件.水和排水设施用管接头密封件材料的要求.第3部分:硫化橡胶泡沫材料 |
Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3 : cellular material of vulcanized rubber. |
| NF T47-305-3/A1-2003 |
弹性密封件.给水排水用管道连接密封件的材料要求.第3部分:硫化橡胶多孔材料 |
Elastomeric seals - Material requirements for joint seals used in water and drainage applications - Part 3 : cellular materials of vulcanized rubber. |
| NF T47-305-4-2000 |
弹性密封件.水和排水设施用管接头密封件材料的要求.第4部分:铸造聚氨基甲酸乙酯密封件 |
Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4 : cast polyurethane sealing elements. |
| NF T47-305-4/A1-2003 |
弹性密封件.给水排水用管道连接密封件的材料要求.第4部分:聚氨酯密封铸件 |
Elastomeric seals - Material requirements for pipe joint seals in water and drainage applications - Part 4 : cast polyurethane sealing elements. |
| NF T47-306-1985 |
煤气管道接头用橡胶密封垫圈.规范和材料 |
Joints rings used for gaz supply pipes and fittings. Specification for material. |
| NF T47-306-2003 |
弹性密封件.输送气体和碳氢液体的管道和配件用密封件的材料要求 |
(Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.) |
| NF T47-401-1977 |
橡胶或塑料制圆柱形垫块 |
CYLINDERS LINED WITH RUBBER OR PLASTICS. |
| NF T47-501-1998 |
橡胶O型环.标识,尺寸和公差 |
Rubber O-ring - Designation, sizes and tolerances. |
| NF T47-502-1996 |
O型圈.缺陷的检查和分类 |
O rings. Dimensional checking and classification of defects. |
| NF T47-503-1998 |
橡胶O型环.最普通的O型环的材料要求 |
Rubber O-rings. Materials requirements for the most common O-ring types. |
| NF T47-504-1991 |
橡胶环形密封圈.静力学和动力学工业应用的普通质量的一般用途的产品.精度级G.质量级4 |
RUBBER O-RINGS. GENERAL PURPOSE PRODUCTS OF ORDINARY QUALITY FOR STATIC AND DYNAMIC INDUSTRIAL APPLICATIONS. PRECISION CLASS G. QUALITY CLASS 4. |
| NF T47-505-1991 |
橡胶环形密封圈.静力学和动力学工业应用的普通质量的一般用途的产品.精度级G.质量级2 |
RUBBER O-RINGS. GENERAL PURPOSE PRODUCTS OF SUPERIOR QUALITY FOR STATIC AND DYNAMIC INDUSTRIAL APPLICATIONS. PRECISION CLASS G. QUALITY CLASS 2. |
| NF T47-506-1991 |
橡胶环形密垫圈.零件的试验方法和条件 |
RUBBER O-RINGS. TEST CONDITIONS AND METHODS FOR FULL-SIZE SPECIMENS. |
| NF T47-507-1994 |
橡胶O型环.O型环的包装,识别和储存 |
RUBBER O-RINGS. PACKAGING, IDENTIFICATION AND STORAGE OF RUBBER O-RINGS. |
| NF T47-600-2002 |
橡胶和塑料软管和软管组件.词汇 |
Rubber and plastics hoses and hose assemblies - Vocabulary. |
| NF T47-820-1-2000 |
结构轴承.第1部分:一般设计规则 |
Structural bearings - Part 1 : general design rules. |
| NF T47-820-11-1998 |
结构轴承.第11部分:运输,存储和安装 |
Structural bearings. Part 11 : transport, storage and installation. |
| NF T47-820-2-2001 |
结构轴承.第2部分:滑动件 |
Structural bearings - Part 2 : sliding elements. |
| NF T47-820-7-2001 |
结构轴承.第7部分:球柱和滚柱聚四氟乙烯轴承 |
Structural beairings - Part 7 : spherical and cylindrical PTFE bearings. |
| NF T47-820-9-1998 |
结构轴承.第9部分:防护 |
Structural bearings. Part 9 : protection. |
| NF T48-101-1994 |
密封用石棉和橡胶压缩薄板.尺寸的测定 |
Asbestos and rubber compressed sheets for seals. Measurement of dimensions. |
| NF T48-102-1994 |
密封用石棉和橡胶压缩薄板.密度的测定 |
ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. DETERMINATION OF DENSITY. |
| NF T48-103-1994 |
密封用石棉和橡胶压缩薄板.拉伸强度的测定 |
Asbestos and rubber compressed sheets for seals. Determination of tensile strength. |
| NF T48-105-1994 |
密封用石棉和橡胶压缩薄板.液体浸泡试验 |
Asbestos and rubber compressed sheets for seals. Liquid immersion test. |
| NF T48-106-1994 |
密封用石棉和橡胶压缩薄板.液体浸泡后撕裂强度试验 |
ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. BREAKING STRENGTH AFTER LIQUID IMMERSION. |
| NF T48-107-1994 |
密封用石棉和橡胶压缩薄板.常温下抗液压强度试验 |
ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. RESISTANCE TO HYDRAULIC PRESSURE AT AMBIENT TEMPERATURE. |
| NF T48-108-1994 |
密封用石棉和橡胶压缩薄板.抗弯曲强度试验 |
Asbestos and rubber compressed sheets for seals. Determination of bending resistance. |
| NF T48-109-1994 |
密封用石棉和橡胶压缩薄板.干燥箱的人工老化试验 |
Asbestos and rubber compressed sheets for seals. Accelerated ageing test on oven. |
| NF T50-001-1-2000 |
塑料.聚酰胺(PA)模塑和挤制材料.名称与符号 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation. |
| NF T50-001-2-1996 |
塑料.模塑和挤压成型的聚酰胺(PA)材料.第2部分:试样的制备和性能的测定 |
PLASTICS. POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 1874-2). |
| NF T50-002-2/A1-2000 |
塑料.聚丙烯(PP)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1. |
| NF T50-004-2-1995 |
塑料.乙烯/乙烯基醋酸脂共聚物热塑性塑料.第2部分:试样的制备和性能的测定 |
PLASTICS. ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 4613-2). |
| NF T50-005-1988 |
塑料.聚(亚烷基)对苯二酸盐.第1部分:命名 |
Plastics. Polyalkylene terephtalates. Part 1 : designation. |
| NF T50-006-2/A1-2000 |
塑料.聚乙烯(PE)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1. |
| NF T50-007-1-1999 |
塑料.聚丁烯(PB)模压和挤制材料.第1部分:命称与符号和规范的基础 |
PLASTICS. POLYBUTENE (PB) MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 8986-1). |
| NF T50-007-2/A1-2000 |
塑料.聚丁烯(PB)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1. |
| NF T50-050-1-2002 |
塑料.符号和缩略术语.第1部分:基本聚合物及其专有特性 |
Plastics - Symbols and abbreviated terms - Part 1 : basic polymers and their special characteristics. |
| NF T50-050-2-2002 |
塑料.符号和缩略语.第2部分:填充剂及加强材料 |
Plastics - Symbols and abbreviated terms - Part 2 : fillers and reinforcing materials. |
| NF T50-050-4-1999 |
塑料.符号和缩略语.第4部分:阻燃剂 |
Plastics. Symbols and abbreviated terms. Part 4 : flame retardants. |
| NF T50-060-2000 |
塑料.塑料产品通用识别标志 |
Plastics - Generic identification and marking of plastics products. |
| NF T50-062-1-2000 |
塑料.单一数据的采样和收集比较.第1部分:模式材料 |
Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials. |
| NF T50-062-2-2002 |
塑料.可比单点数据的采集和表示法.第2部分:长纤维增强塑料 |
Plastics - Acquisition and presentation of comparable single-point data - Part 2 : long-fibre-reinforced plastics. |
| NF T50-064-1-1999 |
塑料.可比较多点数据的采集和表示.第1部分:机械性能 |
PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA. PART 1 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN ISO 11403-1). |
| NF T50-064-1-2003 |
塑料.可比多点数据的采集和表示.第1部分:机械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties.) |
| NF T50-064-2-1999 |
塑料.可比较多点数据的采集和表示.第2部分:热性能和工艺性能 |
PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA. PART 2 : THERMAL AND PROCESSING PROPERTIES. (EUROPEAN STANDARD EN ISO 11403-2). |
| NF T50-064-3-2001 |
塑料.可比较多点数据的采集和表示.第3部分:环境对特性的影响 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 3 : environmental influences on properties. |
| NF T50-100-2002 |
塑料.词汇 |
Plastics - Vocabulary. |
| NF T51-000-1978 |
塑料.优选试验温度和试验时间 |
Plastics. Preferred scales of temperatures and test durations. |
| NF T51-001-1997 |
塑料.弯曲性能测定 |
Plastics. Determination of flexural properties. |
| NF T51-001-2003 |
塑料.弯曲性能测定 |
(Plastics - Determination of flexural properties.) |
| NF T51-005-2-1996 |
塑料.载荷下偏转温度的测定.第2部分:塑料和橡木 |
Plastics. Determination of temperature of deflection under load. Part 2 : plastics and ebonite. |
| NF T51-005-3-1996 |
塑料.载荷下偏转温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics. |
| NF T51-006-1957 |
塑料.可溶于甲醇的聚苯乙烯物质的测定 |
PLASTICS. DETERMINATION OF METHANOL-SOLUBLE POLYSTYRENE. |
| NF T51-008-1998 |
塑料.酚-甲醛模塑.游离氨的检验 |
Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia. |
| NF T51-009-1998 |
塑料.酚-甲醛模塑.游离氨和铵化合物的测定.比色法 |
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method. |
| NF T51-010-1998 |
塑料.酚-甲醛模塑.单体酚的测定.碘量法 |
Plastics. Phenol-formaldehyde mouldings. Detection of free phenols. Iodometric method. |
| NF T51-012-1957 |
塑料模制材料收缩率的计算 |
PLASTICS. DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS. |
| NF T51-013-1969 |
塑料液状聚氯乙烯树脂粘性指数的常规测定 |
PLASTICS. CONVENTIONAL DETERMINATION OF VISCOSITY NUMBER OF PVC RESINS IN SOLUTION. |
| NF T51-018-1981 |
塑料.硬塑料反复弯曲纵向弹性模量 |
Plastics. Modulus of longitudinal elasticity of rigid plastics. |
| NF T51-021-1997 |
塑料.热塑塑料.维卡(VICAT)软化温度的测定 |
Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST). |
| NF T51-022-1997 |
塑料.微生物作用的评价(欧洲标准EN ISO 846) |
Plastics. Evaluation of the action of microorganisms. |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com