标准号 |
中文名称 |
英文名称 |
NF A35-024-1998 |
混凝土钢材.由直径小于5mm的金属线构成的织物 |
(Steels for concrete. Fabric composed of wires with a diameter lower than 5 mm.) |
NF A35-027-2003 |
钢筋混凝土用钢产品.钢筋 |
(Steel products for reinforced concrete - Reinforcements.) |
NF A35-030-1996 |
钢制品.架空线路支持的混凝土杆用带改进粘附性的棒材 |
(Steel products. Bars with improved bond for concrete poles, supports for over head lines.) |
NF A35-035-2001 |
钢产品.热镀锌或锌铝覆层的预应力光滑钢丝和7股钢丝 |
(Steel products - Hot-dip zinc or zinc-aluminium coated prestressing smooth wires and 7-wire strands.) |
NF A35-049-1984 |
冶金产品.通用的拉制棒材和线材.钢号和质量 |
(Iron and steel. General purpose steel. Bars and wire-rod for drawing. Grades and types.) |
NF A35-051-1-1995 |
拉拔和/或冷轧用非合金钢棒.第1部分:一般要求 |
(Non-alloy steel rod for drawing and/or cold rolling. Part 1 : general requirements.) |
NF A35-051-2-1995 |
拉拔和/或冷轧用非合金钢棒.第2部分:一般用途钢棒的专门要求 |
(Non-alloy steel rod for drawing and/or cold rolling. Part 2 : specific requirements for general purposes rod.) |
NF A35-051-3-1995 |
拉拔和/或冷轧用非合金钢棒.第3部分:沸腾和沸腾代用低碳钢棒 |
(NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 3 : SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE LOW CARBON STEEL ROD. (EUROPEAN STANDARD EN 10016-3).) |
NF A35-051-4-1995 |
拉拔和/或冷轧用非合金钢棒.第4部分:特殊用途钢棒的专门要求 |
(NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 4 : SPECIFIC REQUIREMENTS FOR ROD FOR SPECIAL APPLICATIONS. (EUROPEAN STANDARD EN 10016-4).) |
NF A35-052-1987 |
钢铁产品.带改进粘附性的焊接钢丝网和钢丝用非合金钢线材 |
(Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.) |
NF A35-053-1984 |
钢铁产品.热成型或低温成型制造产品用非合金钢线材.型号 |
(Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types.) |
NF A35-055-1984 |
钢铁产品.涂药焊条用非合金钢线材.等级和型号 |
(Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types.) |
NF A35-056-1984 |
钢铁产品.气体保护电弧焊和潜弧焊的焊条用合金钢和非合金钢线材.等级和型号 |
(Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.) |
NF A35-057-1979 |
钢铁产品.冷成形高强度机械弹簧钢丝制造用非合金钢线材.型号 |
(IRON AND STEEL. WIRE RODS MADE OF UNALLOYED STEEL FOR THE MANUFACTURE OF HIGH RESISTING COLD-FORMED SPRING WIRES. TYPES.) |
NF A35-256-1986 |
冶金产品.特殊TH型材.钢的品种 |
(IRON AND STEEL. SPECIAL TH SECTIONS. GRADES.) |
NF A35-501-1993 |
非合金结构钢的热钆产品.交货技术条件 |
(Hot-rolled products of non alloy structural steels. Technical delivery conditions.) |
NF A35-502-1993 |
耐空气腐蚀性高的结构钢.交货技术条件 |
(Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions.) |
NF A35-503-1994 |
铁和钢.热浸没的镀锌钢 |
(Iron and steel. Steel for hot dip galvanizing.) |
NF A35-505-1-1993 |
可焊细晶粒结构钢热轧制品.第1部分:一般交货条件 |
(Hot-rolled products in weldable fine grain structural steels. Part 1 : general delivery conditions.) |
NF A35-505-2-1993 |
可焊细晶粒结构钢热轧制品.第2部分:正火钢交货条件 |
(Hot-rolled products in weldable fine grain structural steels. Part 2 : delivery conditions for nomalized/normalized rolled steels.) |
NF A35-505-3-1993 |
可焊细晶粒结构钢热轧制品.第2部分:热机轧制钢的交货条件 |
(Hot-rolled products in weldable fine grain structural steels. Part 3 : delivery conditions for thermomechanical rolled steels.) |
NF A35-511-1996 |
自动化喷砂清理和自动化预制优质钢产品(欧洲标准EN 10238) |
(Automatically blast-cleaned and automatically prefabrication primed structural steel products.) |
NF A35-520-1-1995 |
非合金钢热轧板桩.第1部分:交货技术条件 |
(Hot rolled sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
NF A35-551-1999 |
铸造硬化钢.技术提交条件(欧洲标准EN 10084) |
(Case hardening steels - Technical delivery conditions.) |
NF A35-552-1-1997 |
淬火和回火钢.第1部分:特殊钢交货技术条件 |
(Quenched and tempered steels - Part 1 : technical delivery conditions for specials steels.) |
NF A35-552-2-1997 |
淬火钢和回火钢.第2部分:非合金优质钢交货技术条件 |
(Quenched and tempered steels. Part 2 : technical delivery conditions for unaloyed quality steels.) |
NF A35-552-3-1996 |
淬火钢和回火钢.第3部分:硼钢的交货技术条件 |
(Quanched and tempered steels. Part 3 : technical delivery conditions for boron steels.) |
NF A35-556-1984 |
冶金产品.供金属构件用的外螺纹紧固件用热处理后的特殊钢. |
(Iron and steel. Heat treatable steels for externally threaded fasteners for structural purposes.) |
NF A35-557-1983 |
冶金产品.高性能机械制造用的外螺纹紧固件用热处理后特殊钢. |
(Iron and steel. Heat treatable steels for externally threaded, high performance fasteners for engineering purposes.) |
NF A35-558-1999 |
具有特殊高温和/或低温性能的紧固件用钢和镍合金 |
(Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.) |
NF A35-562-1998 |
自由切割钢.半精整产品热轧棍材和棒材的技术提交条件(欧洲标准EN10087) |
(Free-cutting steels. Technical delivery conditions for semi-finished products, hot-rolled bars and rods.) |
NF A35-563-1983 |
冶金产品.表面加热后淬火用热处理的特殊钢.质量 |
(Iron and steel. Heat treated special steels for quenching after surface treating. Types.) |
NF A35-564-1-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第1部分:一般交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 1 : general technical delivery conditions.) |
NF A35-564-2-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第2部分:冷处理后不用于热处理的钢的交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 2 : technical delivery conditions for steels not intended for heat treatment after cold working.) |
NF A35-564-3-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第3部分:表面硬化钢的交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 3 : technical delivery conditions for case hardening steels.) |
NF A35-564-4-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第4部分:淬火和回火钢的交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 4 : technical delivery conditions for steels for quenching and tempering.) |
NF A35-564-5-2002 |
冷镦和冷挤压的钢杆材、棒材和线材.第5部分:不锈钢的交货技术条件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 5 : technical delivery conditions for stainless steels.) |
NF A35-565-1994 |
钢铁.轴承钢.类型 |
(IRON AND STEEL. BEARING STEELS. TYPES.) |
NF A35-566-1983 |
钢铁产品.链条钢.等级和型号 |
(Iron and steel products. Chain steels. Grades and types.) |
NF A35-567-1984 |
冶金产品.高负载重型机械结构用渗碳合金钢.牌号.半成品和棒材 |
(IRON AND STEEL. CASE HARDENED ALLOY STEELS FOR SOLID HIGHLY-STRESSED MECHANICAL PARTS. GRADES. SEMI-FINISHED PRODUCTS AND BARS.) |
NF A35-571-2003 |
淬火回火弹簧用热轧钢.交货技术条件 |
(Hot-rolled steels for quenched and tempered springs - Technical delivery conditions.) |
NF A35-572-1995 |
不锈钢.第1部分:不锈钢目录 |
(STAINLESS STEELS. PART 1 : LIST OF STAINLESS STEELS. (EUROPEAN STANDARD EN 10088-1).) |
NF A35-574-1995 |
不锈钢.第3部分:一般用途的半成品,钢棒,轧制线材和型钢的交货技术条件 |
(Stainless steels. Part 3 : technical delivery conditions for semi-finished products, bars, rods, and sections for general purposes.) |
NF A35-578-2003 |
耐蠕变的镍和钴合金钢 |
(Creep resisting steels, nickel and cobalt alloys.) |
NF A35-579-1998 |
内燃机合金和钢材 |
(Valve steels and alloys for internal combustion engines.) |
NF A35-584-1999 |
耐热钢及镍合金 |
(HEAT RESISTING STEELS AND NICKEL ALLOYS. (EUROPEAN STANDARD EN 10095).) |
NF A35-587-2003 |
弹簧用不锈钢带材.交货技术条件 |
(Stainless steel strip for springs - Technical delivery conditions.) |
NF A35-590-1992 |
钢铁产品.工具钢 |
(IRON AND STEEL. TOOL STEELS.) |
NF A35-596-1987 |
冶金产品.碳素刀具钢 |
(Iron and steel. Carbon steels for cutlery.) |
NF A36-000-1979 |
结构钢和锅炉与压力容器用钢的焊接特性的推荐规范 |
(RECOMMENDATIONS CONCERNING THE WELDABILITY OF STRUCTURAL STEEL AND OF BOILER AND PRESSURE VESSELS STEEL.) |
NF A36-010-1980 |
为防止脆性断裂危险用金属结构钢和锅炉用钢的类型选择 |
(CHOICE OF STEEL TYPES FOR THE METALLIC CONSTRUCTION AND BOILER MAKING FOR BRITTLE FRACTURE HAZARD PREVENTION.) |
NF A36-142-2002 |
冷轧锡产品.电解锡板和电解铬/氧化铬涂层钢 |
(Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel.) |
NF A36-144-1992 |
生产马口铁或电镀铬铁用冷轧黑铁皮卷材(欧洲标准EN 10205) |
(COLD REDUCED BLACKPLATE IN COIL FROM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL. (EUROPEAN STANDARD EN 10205).) |
NF A36-160-1994 |
电镀锌冷轧钢板产品.交货技术条件 |
(Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions.) |
NF A36-160-2003 |
冷成型用电解镀锌扁平冷轧材.技术交货条件 |
(Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions.) |
NF A36-161-1999 |
电解锌镍(ZN)镀膜钢平板产品技术提交条件.(欧洲标准EN10271) |
(ELECTROLYTICALLY ZINC-NICKEL (ZN) COATED STEEL FLAT PRODUCTS. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10271).) |
NF A36-202-1993 |
对制品表面垂直方向有高变形特性的钢制品.交货技术条件 |
(Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions.) |
NF A36-204-1-1995 |
淬火和回火或沉淀硬化条件下制造高屈服结构钢的板材和宽扁材.第1部分:一般交货条件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 1 : general delivery conditions.) |
NF A36-204-2-1995 |
淬火和回火或沉淀硬化条件下制造高屈服结构钢的板材和宽扁材.第2部分:淬火或回火钢 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 2 : delivery conditions for quenched and tempered steels.) |
NF A36-204-3-1995 |
淬火和回火或沉淀硬化条件下制造高屈服结构钢的板材和宽扁材.第3部分:沉淀硬化钢交货条件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 3 : delivery conditions for precipitation.) |
NF A36-205-1-2001 |
承压器件用扁钢制品.第1部分:一般要求 |
(Flat products made of steels for pressure purposes - Part 1 : general requirements.) |
NF A36-205-1/A1-2003 |
压力容器用扁平钢轧材.第1部分:一般要求 |
(Flat products made of steels for pressure purposes - Part 1 : general requirements.) |
NF A36-205-2-2003 |
压力容器用扁平钢轧材.第2部分:具有规定高温性能的非合金钢与合金钢 |
(Flat products made of steels for pressure purposes - Part 2 : non-alloy and alloy steels with specified elevated temperature properties.) |
NF A36-205-3-2003 |
压力容器用扁平钢轧材.第3部分:经过正火处理的可焊细晶粒钢 |
(Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.) |
NF A36-205-4-2003 |
压力容器用扁平钢轧材.第4部分:具有规定低温特性的镍合金钢 |
(Flat products made of steels for pressure purposes - Part 4 : nickel alloy steels with specified low temperature properties.) |
NF A36-205-5-2003 |
压力容器用钢制扁平产品.第5部分:热机轧制的可焊接细粒钢 |
(Flat products made of steels for pressure purposes - Part 5 : weldable fine grain steels, thermomechanically rolled.) |
NF A36-205-6-2003 |
压力容器用钢制扁平产品.第6部分:可焊接淬火和回火细粒钢 |
(Flat products made of steels for pressure purposes - Part 6 : weldable fine grain steels, quenched and tempered.) |
NF A36-211-1997 |
焊接气体气缸用薄钢板和条带 |
(Steel sheet and strip for welded gas cylinders.) |
NF A36-212-2002 |
固定近海结构的可焊接结构钢.技术交货条件 |
(Weldable structural steels for fixed offshore structures - Technical delivery conditions.) |
NF A36-225-2000 |
压力容器用不锈钢棒 |
(Stainless steel bars for pressure purposes.) |
NF A36-226-2001 |
具有规定的高温特性的压力容器用热轧可焊接钢棒 |
(Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.) |
NF A36-231-3-1995 |
冷成型用高屈服点钢制热轧扁平产品.第3部分:普通退火和轧制钢交货条件 |
(HOT-ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING. PART 3 : DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS. (EUROPEAN STANDARD EN 10149-3).) |
NF A36-250-1987 |
冶金产品.镀了金属的板材 |
(Iron and steel. Plated sheet.) |
NF A36-270-1991 |
冶金产品.长型钢板 |
(Iron and steel. Profiled plates in rolling direction.) |
NF A36-301-1998 |
冷定型用连续热滚低碳钢片材和带材.技术提交条件 |
(Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions.) |
NF A36-310-2000 |
冷成形用高屈服强度连续热镀覆层的板材和带钢.交货技术条件 |
(Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions.) |
NF A36-310/A1-2003 |
冷成形用有较高屈服强度的持续热浸覆层钢带和钢薄板.技术交货条件 |
(Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions.) |
NF A36-321-2000 |
冷冲压用连续热镀锌的低碳钢制的板材和带钢.交货的技术条件 |
(Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions.) |
NF A36-322-2000 |
连续热镀锌的结构钢制的板材和带钢.交货的技术条件 |
(Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions.) |
NF A36-325-1995 |
连续热浸镀铝锌薄钢板和钢带.交货技术条件 |
(CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10215).) |
NF A36-331-1989 |
钢铁产品.不锈钢.连续镀铅的带材和板材 |
(IRON AND STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED SHEET AND STRIP.) |
NF A36-340-2002 |
连续热浸铝-硅涂覆的钢条和钢板.交货技术条件 |
(Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions.) |
NF A36-345-1991 |
冶金产品.铝合金薄板,薄板和卷材 |
(IRON AND STEEL. ALUMINIUM COATED SHEET. CUT LENGTHS AND COILS.) |
NF A36-350-1-1996 |
连续有机涂覆(卷材涂覆)钢板产品.第1部分:一般信息(定义、材料、公差和试验方法)(欧洲标准EN 10169-1) |
(Continuously organic coated (coil coated) steel flat products. Part 1 : general information (definitions, materials, tolerances, test methods).) |
NF A36-350-3-2003 |
连续有机涂覆(卷材涂覆)扁钢产品.第3部分:建筑物内部用产品 |
(Continuously organic coated (coil coated) steel flat products - Part 3 : products for building interior applications.) |
NF A36-361-1986 |
冶金产品.模板用的三联钢带.质量 |
(Iron and steel. Three-layer steel strips for mould boards. Prescriptions.) |
NF A36-401-1998 |
冷成型冷轧低碳钢平板产品.技术递交条件 |
(Cold-rolled low carbon steel flat products for cold forming. Technical delivery conditions.) |
NF A36-402-1996 |
玻璃搪瓷用冷轧低碳钢平板产品.技术交货条件 |
(COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10209).) |
NF A36-560-2002 |
氮化钢.交货技术条件 |
(Nitriding steels - Technical delivery conditions.) |
NF A36-601-1980 |
锅炉和压力容器用可焊钢制锻件.碳钢和碳锰钢.质量等级和类型 |
(WELDED STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. CARBON AND CARBON MANGANESE STEELS. GRADES AND TYPES.) |
NF A36-602-1988 |
锅炉和压力容器用可焊钢制锻件.钼、锰钼和铬钼合金钢.质量等级和类型 |
(WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. MO,MN-MO AND CR-MO ALLOY STEELS. GRADES AND TYPES.) |
NF A36-603-1988 |
锅炉和压力容器用可焊钢制锻件.高屈服强度钢.质量等级和类型 |
(WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. HIGH YIELD STRENGTH ALLOY STEELS. GRADES AND TYPES.) |
NF A36-605-1982 |
锅炉和压力容器用焊接钢冲压锻件.碳钢和碳锰钢.牌号与型号 |
(Weldable steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .) |
NF A36-606-1982 |
锅炉和压力容器用焊接钢冲压锻件.钼、锰钼和铬钼合金钢.牌号和型号 |
(Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.) |
NF A36-607-1984 |
锅炉和压力容器用自由锻造或模锻法制奥氏体不锈钢零件.质量等级和类型 |
(AUSTENITIC STAINLESS STEEL PARTS OBTAINED BY FLAT DIE FORGING OR DROP FORGING FOR BOILERS AND PRESSURE VESSELS. GRADE AND TYPES.) |
NF A36-613-1986 |
一般用锻件.不锈钢 |
(GENERAL PURPOSE FORGINGS. STAINLESS STEELS.) |
NF A36-620-1-1998 |
压力设备用钢锻件.第1部分:自由锻的一般要求(欧洲标准EN 10222-1) |
(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 1 : GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS. (EUROPEAN STANDARD EN 10222-1).) |
NF A36-620-1/A1-2002 |
压力容器用钢锻件.第1部分:敞口铸模锻件的一般要求 |
(Steel forgings for pressure purposes - Part 1 : general requirements for open die forgings.) |
NF A36-620-3-1999 |
承压用钢锻件.第3部分:规定低温特性的镍钢 |
(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 3 : NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES. (EUROPEAN STANDARD EN 10222-3).) |
NF A36-620-4-1999 |
承压用钢锻件.第4部分:高弹性强度的可焊接细粒钢 |
(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 4 : WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH. (EUROPEAN STANDARD EN 10222-4).) |
NF A36-620-4/A1-2002 |
承压用钢锻件.第4部分:高弹性强度的可焊接细晶粒钢 |
(Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.) |
NF A36-630-2-1999 |
一般工程用可拆模钢锻件.第2部分: 非合金优质钢和特殊钢 |
(Open die steel forgings for general engineering purposes - Part 2 : non-alloy quality and special steels.) |
NF A36-630-3-1999 |
一般工程用可拆模钢锻件.第3部分:特殊合金钢 |
(Open die steel forging for general engineering purposes - Part 3 : alloy special steels.) |
NF A36-701-2002 |
包装用钢.用于接触人和动物消费的食品、产品和饮料的扁钢制品.未镀的黑钢板 |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (black plate).) |
NF A36-702-2002 |
包装用钢.用于接触人和动物消耗的食品、饲料、产品和饮料的扁钢制品.涂锡钢(马口铁) |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate).) |
NF A36-703-2002 |
包装用钢.用于接触人和动物消费的食品、产品和饮料的扁钢制品.镀铬非合金钢 |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non alloy steel chromium coated.) |
NF A36-711-2002 |
无包装钢.用于接触人和动物消耗的食品、产品和饮料的不锈钢 |
(Non packaging steel - Stainless steel intended for use in contact with foodstuffs, products and beverages for human and animal consumption.) |
NF A36-712-1-2002 |
非包装钢.用于接触人和动物消耗的食品、饲料、产品和饮料的涂金属的扁钢制品.第1部分:涂锌或锌合金(非不锈) |
(Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 1 : zinc or zinc alloy coated (non-stainles) |
NF A36-712-2-2002 |
非包装钢.用于接触人和动物消耗的食品、饲料、产品和饮料的涂金属的扁钢制品.第1部分:涂锌或锌合金(非不锈) |
(Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 2 : Aluminium coated or aluminium-silicium) |
NF A36-712-3-2003 |
未包装钢.与人和动物用食品、产品和饮料接触的镀金属的扁钢制品.第3部分:镀铬(非不锈)钢 |
(Unpackaged steels - Metallic coated flat steel products intented for contact with foodstuffs, products and beverages for human and animal consumption - Part 3 : chromium plated (non stainless) steels.) |
NF A36-712-5-2003 |
包装用钢除外的钢.与人和动物消费用食品、产品和饮料接触的金属涂覆扁钢制品.第5部分:涂锡(非不锈)钢 |
(Steels excluding packaging applications - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 5 : tin coated (non-s) |
NF A36-714-2002 |
非包装钢.用于接触人和动物消耗的食品、饲料、产品和饮料的扁钢制品.非涂覆(非不锈)钢 |
(Unpackaged steels - Flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Uncoated (and non stainless) steels.) |
NF A36-715-2003 |
未包装钢.与人和动物用食品、产品和饮料接触的长的钢制品.未镀涂、非不锈、非合金和合金钢 |
(Unpackaged steels - Long steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Uncoated, non stainless, unalloyed and alloyed steels.) |
NF A37-101-2003 |
冷轧钢型材.交货技术条件.尺寸和横截面公差 |
(Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances.) |
NF A37-201-1-1995 |
非合金钢冷成形板垛.第1部分:交货技术条件 |
(Cold formed sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
NF A37-401-1-1999 |
光亮钢制品.技术交货条件.第1部分:总则 |
(Bright steel products. Technical delivery conditions. Part 1 : general.) |
NF A37-401-2-1999 |
光亮钢制品.技术交货条件.第2部分:一般工程用钢 |
(Bright steel products. Technical delivery conditions. Part 2 : steels for general engineering purposes.) |
NF A37-401-3-1999 |
光亮钢制品.技术交货条件.第3部分:易切削钢 |
(Bright steel products. Technical delivery conditions. Part 3 : free-cutting steels.) |
NF A37-401-4-1999 |
光亮钢制品.技术交货条件.第4部分:表面硬化钢 |
(Bright steel products. Technical delivery conditions. Part 4 : case-hardening steels.) |
NF A37-401-5-1999 |
光亮钢制品.技术交货条件.第5部分:淬火和回火钢 |
(Bright steel products. Technical delivery conditions. Part 5 : steels for quenching and tempering.) |