标准号 |
中文名称 |
英文名称 |
| NF A50-431-1995 |
铝和铝合金.烹调器具生产用圆坯料.规范 |
(Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications.) |
| NF A50-432-1997 |
铝和铝合金.通用盘绕涂层的薄板和带材.规范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS. SPECIFICATIONS. (EUROPEAN STANDARD EN 1396).) |
| NF A50-433-1997 |
铝和铝合金.踏脚板.规范(欧洲标准EN 1386) |
(ALUMINIUM AND ALUMINIUM ALLOYS. TREAD PLATE. SPECIFICATIONS. (EUROPEAN STANDARD EN 1386).) |
| NF A50-434-1-1998 |
铝及铝合金.一般用途再轧坯料.第1部分:热轧制再轧坯料规范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 1 : SPECIFICATIONS FOR HOT-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-1).) |
| NF A50-434-2-1998 |
铝及铝合金.一般用途再轧坯料.第2部分:冷轧制再轧坯料规范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 2 : SPECIFICATIONS FOR COLD-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-2).) |
| NF A50-435-1996 |
铝及铝合金.试验方法.板材和带材的凸耳试验 |
(ALUMINIUM AND ALUMINIUM ALLOYS. TEST METHODS. EARING TEST FOR SHEET AND STRIP. (EUROPEAN STANDARD EN 1669).) |
| NF A50-437-1995 |
铝和铝合金.罐头、盒子和盖子的轧制品 |
(Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications.) |
| NF A50-440-1996 |
铝和铝合金.薄金属片.第1部分:检验和交货的技术条件 |
(Aluminium and aluminium alloys. Foil. Part 1 : technical conditions for inspection and delivery.) |
| NF A50-441-1996 |
铝和铝合金.第2部分:机械性能 |
(Aluminium and aluminium alloys. Foil. Part 2 : mechanical properties.) |
| NF A50-442-1996 |
铝和铝合金.薄金属片.第3部分:尺寸公差 |
(Aluminium and aluminium alloys. Foil. Part 3 : tolerances on dimensions.) |
| NF A50-443-1997 |
铝和铝合金.薄金属片.第4部分:特性要求 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PART 4 : SPECIAL PROPERTY REQUIREMENTS. (EUROPEAN STANDARD EN 546-4).) |
| NF A50-452-1984 |
铝和铝合金.板状或带状涂漆产品.特性 |
(Aluminium and aluminium alloys. Coil coating strip and sheet. Characteristics.) |
| NF A50-461-1996 |
铝及铝合金.散热片坯料.第2部分:机械性能 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 683-2).) |
| NF A50-462-1996 |
铝及铝合金.散热片坯料.第3部分:尺寸和形状公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 3 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 683-3).) |
| NF A50-470-1-2003 |
铝和铝合金.结构性铁路设施用制品.检查和交货的技术条件.第1部分:挤压制品 |
(Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1 : extruded products.) |
| NF A50-506-1982 |
铝和铝合金.用滚压机和压弯机冷成形型材.一般特性 |
(Aluminium and aluminium alloys. Cold formed sections produced by cold rolling and by bending. General characteristics.) |
| NF A50-510-1994 |
铝和铝合金.从锻制产品中获取的冲击挤压加工用铝块.规范 |
(Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications.) |
| NF A50-600-1994 |
铝和铝合金.适于挤压的挤压铸坯 |
(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUSION INGOTS. SPECIFICATIONS. (EUROPEAN STANDARD EN 486).) |
| NF A50-616-1998 |
铝和铝合金.冷拉棒/棍和管.第7部分:无缝管.尺寸,公差和形状(欧洲标准EN754-7) |
(Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 7 : seamless tubes, tolerances on dimensions and form.) |
| NF A50-617-1998 |
铝及铝合金.冷拔棒材/条材和管材.第8部分:多孔拉拔管尺寸和形状公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COLD DRAWN ROD/BAR AND TUBE. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 754-8).) |
| NF A50-620-2004 |
铝及铝合金.通用冷拉制圆盘管.规范 |
(Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification.) |
| NF A50-632-1995 |
铝和铝合金.挤压棒材/管材和型材.第三部分:挤压圆形棒材.尺寸和形状公差 |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 3 : round bars, tolerances on dimensions and form.) |
| NF A50-633-1995 |
铝和铝合金.挤压棒材/管材和型材.第四部分:挤压方形条材尺寸和形状和公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 4 : SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-4).) |
| NF A50-634-1995 |
铝和铝合金.挤压棒材/管材和型材.第五部分:挤压矩形棒材. 尺寸和形状公差 |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 5 : rectangular bars, tolerances on dimensions and form.) |
| NF A50-635-1995 |
铝和铝合金.挤压棒材,管材和型材.第六部分:挤压六角形条材.尺寸和形状公差 |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 6 : hexagonal bars, tolerances on dimensions and form.) |
| NF A50-636-1999 |
铝和铝合金.挤压棍棒,管和截面图.第7部分:无缝管尺寸公差和形状(欧洲标准EN755-7) |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 7 : seamless tubes, tolerances on dimensions and form.) |
| NF A50-637-1998 |
铝和铝合金.挤压棍/棒材,管和靠模.第8部分:钻头出水口管,尺寸和框架公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-8).) |
| NF A50-638-9-2001 |
铝和铝合金.挤制棒材/杆材、管及型材.第9部分:型材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form.) |
| NF A50-640-1-2001 |
铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.第1部分:检验和交货技术条件 |
(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1 : technical conditions for inspection and delivery.) |
| NF A50-640-2-2001 |
铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.第2部分:尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form.) |
| NF A50-645-2004 |
铝及铝合金.通用挤制圆盘管.规范 |
(Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.) |
| NF A50-650-2-1997 |
铝和铝合金.挤压棒材.电气设备的特殊要求 |
(Aluminium and aluminium alloys. Drawing stock. Part 2 : specific requirements for electrical applications.) |
| NF A50-650-4-1997 |
铝和铝合金.挤压棒材.焊接设备的特殊要求 |
(Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.) |
| NF A50-701-1982 |
铝和铝合金.拉制线材.根据成分分类 |
(Aluminium and aluminium alloys. Extruded and drawn products. Division into groups according to chemical composition.) |
| NF A50-703-1984 |
铝和铝合金.拉制方形棒材.尺寸公差和推荐尺寸 |
(Aluminium and aluminium alloys. Square section extruded bars. Dimensional tolerances and recommended dimensions.) |
| NF A50-706-1987 |
铝和铝合金.Ｌ型截面拉制型材.尺寸公差和推荐尺寸 |
(Aluminium and aluminium alloys. Angles. Dimension and form tolerances.) |
| NF A50-707-1981 |
铝和铝合金.Ｉ型截面拉制型材.尺寸公差和推荐尺寸 |
(Aluminium and aluminium alloys. Extruded shapes : I beams. Tolerances and dimensions.) |
| NF A50-708-1982 |
铝和铝合金.Ｔ型截面拉制型材.尺寸公差和推荐尺寸 |
(Aluminium and aluminium alloys. Extruded shape : tees. Tolerances and dimensions.) |
| NF A50-709-1981 |
铝和铝合金.Ｕ型截面拉制型材.尺寸公差和推荐尺寸 |
(Aluminium and aluminium alloys. Extruded shapes ; channels. Tolerances and dimensions.) |
| NF A50-802-1988 |
铝和铝合金.大直径焊接管.尺寸和公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.) |
| NF A50-821-1971 |
铝和铝合金.冷滚轧成形型材.尺寸和尺寸公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COLD FORMED SECTIONS PRODUCED BY COLD ROLLING. DIMENSIONS AND TOLERANCES.) |
| NF A50-825-1971 |
铝和铝合铝.冷弯成形型材.尺寸公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COLD FORMED SECTIONS OBTAINED BY BENDING. DIMENSION TOLERANCES.) |
| NF A50-910-1997 |
铝及铝合金.铸锻造坯料.第1部分:检查和交货技术条件(欧洲标准EN 604-1) |
(ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 604-1).) |
| NF A50-911-1997 |
铝及铝合金.铸锻造坯料.第2部分:尺寸和形状公差(欧洲标准EN 604-2) |
(ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 2 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 604-2).) |
| NF A50-920-1996 |
铝及铝合金.锻造坯料.第1部分:检验和交货的技术条件 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 603-1).) |
| NF A50-921-1996 |
铝及铝合金.锻造坯料.第2部分:机械性能 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 603-2).) |
| NF A50-922-2000 |
铝及铝合金.锻造坯料.第3部分:尺寸和形状公差 |
(Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.) |
| NF A50-931-1994 |
锻铝和铝合金锻件.第2部分:机械特性和附加特性要求 |
(Aluminium and aluminium alloys. Forgings. Part 2 : mechanical properties and additional property requirements.) |
| NF A50-932-3-2002 |
铝和铝合金.锻造.第3部分:尺寸和形式公差 |
(Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form.) |
| NF A51-050-1983 |
铜和合金.铜的分类 |
(Copper and alloys. Classification of coppers.) |
| NF A51-080-1991 |
形状记忆合金.词汇和测量 |
(SHAPE MEMORY ALLOYS (SMA). VOCABULARY AND MEASURES.) |
| NF A51-090-1999 |
铜及铜合金.带材弹性弯折极限的测定 |
(Copper and copper alloys. Determination of spring bending limit on strip.) |
| NF A51-102-1999 |
铜和铜合金.热交换器用的无缝圆管 |
(Copper and copper alloys. Seamless, round tubes for heat exchangers.) |
| NF A51-103-1999 |
铜和铜合金.无缝铜毛圆管 |
(Copper and copper alloys. Seamless, round copper capillary tubes.) |
| NF A51-118-1998 |
铜和铜合金.铜拉制杆材(线材) |
(Copper and copper alloys - Copper drawing stock (wire rod).) |
| NF A51-120-1996 |
铜和铜合金.无缝的.应用于环境卫生和加热的水和气体的圆形铜管( 欧洲标准EN1057) |
(Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.) |
| NF A51-121-2003 |
铜和铜合金.带固体覆层的预绝缘铜管 |
(Copper and copper alloys - Pre-insulated copper tubes with solid covering.) |
| NF A51-125-1999 |
铜及铜合金.一般用途的无缝圆管 |
(Copper and copper alloys - Seamless, round tubes for general purposes.) |
| NF A51-126-1-2001 |
铜和铜合金.空气调节和制冷用无缝圆形铜管.第1部分:管道系统用管 |
(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems.) |
| NF A51-126-2-2001 |
铜和铜合金.空气调节和制冷用无缝圆形铜管.第2部分:设备用管 |
(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2 : tubes for equipment.) |
| NF A51-127-2001 |
铜和铜合金.医用气体或真空用的无缝圆铜管 |
(Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.) |
| NF A51-128-2002 |
铜和铜合金.电器用无缝铜管 |
(Copper and copper alloys - Seamless copper tubes for electrical purposes.) |
| NF A51-129-1999 |
铜和铜合金.热交换器用无缝轧制翅翼管 |
(Copper and copper alloys - Rolled, finned seamless tubes for heat exchangers.) |
| NF A51-201-1998 |
铜和铜合金.一般用途的板材、薄板、带材和圆材 |
(Copper and copper alloys - Plate, sheet, strip and circles for general purposes.) |
| NF A51-202-1998 |
铜和合金铜.煮水器,压力容器和热水贮存器用的盘状,片状,带状,和环状铜和铜合金 |
(Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units.) |
| NF A51-202/A1-2000 |
铜和合金铜.煮水器、压力容器和热水贮存器用的板状、片状和环状铜和铜合金 |
(Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels, and hot water storage units.) |
| NF A51-203-1998 |
铜和铜合金.弹簧和连接器用带材 |
(Copper and copper alloys - Strip for springs and connectors.) |
| NF A51-204-1998 |
铜和铜合金.导架用带材 |
(Copper and copper alloys - Strip for lead frames.) |
| NF A51-205-2002 |
铜及铜合金.热浸镀锡带 |
(Copper and copper alloys - Hot-dip tinned strip.) |
| NF A51-300-1997 |
铜及铜合金.一致性声明 |
(Copper and copper alloys. Declarations of conformity.) |
| NF A51-301-1998 |
铜和铜合金.一般用途棒材 |
(Copper and copper alloys - Rod for general purposes.) |
| NF A51-302-1998 |
铜和铜合金.切削加工用棒 |
(Copper and copper alloys - Rod for free machining purposes.) |
| NF A51-302/A1-2002 |
铜和铜合金.高速切削用棒材 |
(Copper and copper alloys - Rod for free machining purposes.) |
| NF A51-303-1998 |
铜和铜合金.可锻和未锻的锻料 |
(Copper and copper alloys - Wrought and unwrought forging stock.) |
| NF A51-304-1998 |
铜和铜合金.一般用途线材 |
(Copper and copper alloys - Wire for general purposes.) |
| NF A51-305-1998 |
铜和铜合金.一般用途型材和矩形棒材 |
(Copper and copper alloys - Profiles and rectangular bar for general purposes.) |
| NF A51-306-1998 |
铜和铜合金.切削加工用空心棒 |
(Copper and copper alloys - Hollow rod for free machining purposes.) |
| NF A51-306/A1-2002 |
铜和铜合金.高速切削用中空棒材 |
(Copper and copper alloys - Hollow rod for free machining purposes.) |
| NF A51-307-2003 |
铜和铜合金.焊接和钎焊用棒材和线材 |
(Copper and copper alloys - Rod and wire for welding and braze welding.) |
| NF A51-309-2002 |
铜和铜合金.生产电导体用拉制圆铜丝 |
(Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors.) |
| NF A51-310-2002 |
铜和铜合金.电子管、半导体器件和真空设施用高传导性的铜制产品 |
(Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications.) |
| NF A51-311-2002 |
铜和铜合金.电气设备用铜制型材和异型金属丝 |
(Copper and copper alloys - Copper profiles and profiled wire for electrical purposes.) |
| NF A51-430-1996 |
铜和铜合金.建筑用薄板及带材(欧洲标准EN 1172) |
(COPPER AND COPPER ALLOYS. SHEET AND STRIP FOR BUILDING PURPOSES. (EUROPEAN STANDARD EN 1172).) |
| NF A51-600-1999 |
铜及铜合金.废钢 |
(COPPER AND COPPER ALLOYS. SCRAP. (EUROPEAN STANDARD EN 12861).) |
| NF A53-702-2003 |
铜和铜合金.主合金 |
(Copper and copper alloys - Master alloys.) |
| NF A53-704-1998 |
铜和铜合金.铜阴极(欧洲标准EN 1978) |
(COPPER AND COPPER ALLOYS. COPPER CATHODES. (EUROPEAN STANDARD EN 1978).) |
| NF A53-705-1999 |
铜和铜合金.铸块和铸件 |
(Copper and copper alloys - Ingots and castings.) |
| NF A53-706-1998 |
铜和铜合金.铸造未最后成形铜产品(欧洲标准EN 1976) |
(COPPER AND COPPER ALLOYS. CAST UNWROUGHT COPPER PRODUCTS. (EUROPEAN STANDARD EN 1976).) |
| NF A54-100-1995 |
精制镍 |
(REFINED NICKEL.) |
| NF A54-101-1974 |
镍和镍合金.非合金镍轧制产品 |
(NICKEL AND NICKEL ALLOYS. ROLLED PRODUCTS IN NON-ALLOYED NICKEL.) |
| NF A54-301-1973 |
镍和镍合金.具有延伸特征的铁镍合金 |
(NICKEL AND NICKEL ALLOYS. IRON-NICKEL ALLOYS WITH PARTICULAR DILATABILITY.) |
| NF A54-401-1973 |
镍和镍合金.镍钼合金与镍钼铬合金 |
(NICKEL AND NICKEL ALLOYS. NICKEL-MOLYBDENUM AND NICKEL-MOLYBDENUM-CHROMIUM-ALLOYS.) |
| NF A55-105-1980 |
铅锭 |
(LEAD IN INGOTS.) |
| NF A55-110-2003 |
锌和锌合金.初级锌 |
(Zinc and zinc alloys - Primary zinc.) |
| NF A55-111-2003 |
锌和锌合金.二次利用的锌 |
(Zinc and zinc alloys - Secondary zinc.) |
| NF A55-112-1998 |
锌和锌合金.取样方法.规范 |
(ZINC AND ZINC ALLOYS. METHOD OF SAMPLING. SPECIFICATIONS. (EUROPEAN STANDARD EN 12060).) |
| NF A55-210-1996 |
锌及锌合金.建筑物用轧制平板制品规范 |
(Zinc and zinc alloys. Specifications for rolled flat products for building.) |
| NF A55-300-1997 |
锌和锌合金.锌合金压制铸件.铸块和液体 |
(Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid.) |
| NF A55-999-2003 |
铅和铅合金.废料.术语和定义 |
(Lead and lead alloys - Scraps - Terms and definitions.) |
| NF A56-101-1985 |
减摩作用白合金锭.特性 |
(ANTIFRICTION ALLOY INGOTS. CHARACTERISTICS.) |
| NF A56-102-1995 |
锡及锡合金.锡锭 |
(TIN AND TIN ALLOYS. INGOT TIN. (EUROPEAN STANDARD EN 610).) |
| NF A56-103-1-1995 |
锡及锡合金.铅锡合金和铅锡合金器皿.第1部分:铅锡合金 |
(Tin and tin alloys. Pewter and pewterware. Part 1 : pewter.) |
| NF A56-103-2-1996 |
锡及锡合金.铅锡合金和铅锡合金器皿.第2部分:铅锡合金器皿 |
(TIN AND TIN ALLOYS. PEWTER AND PEWTERWARE. PART 2 : PEWTERWARE. (EUROPEAN STANDARD EN 611-2).) |
| NF A57-100-1994 |
铸铝合金.用于生产与食品接触的材料和物品的金属的化学成分 |
(Aluminium and aluminium alloys. Castings. Chemical composition of castings for use in contact with food.) |
| NF A57-110-1995 |
铝和铝合金.液体金属.规范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. LIQUID METAL. SPECIFICATIONS. (EUROPEAN STANDARD EN 577).) |
| NF A57-130-1996 |
铝及铝合金.冶炼用合金锭.规范(欧洲标准EN 1676) |
(Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications.) |
| NF A57-140-1995 |
铝和铝合金.通过熔化制造的母合金.规范 |
(Aluminium and aluminium alloys. Master alloys produced by melting. Specifications.) |
| NF A57-220-1998 |
铝和铝合金.铸件.化学成分和机械性能(欧洲标准EN 1706) |
(Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties.) |
| NF A57-501-1998 |
镁和镁合金.铸造阳极用镁合金 |
(Magnesium and magnesium alloys. Magnesium alloys for cast anodes.) |
| NF A57-502-1998 |
镁和镁合金.非合金镁 |
(Magnesium and magnesium alloys. Unalloyed magnesium.) |
| NF A58-002-1999 |
铅及铅合金.电缆护套和套筒用铅合金锭 |
(Lead and lead alloys - Lead alloys ingots for electric cable sheathing and for sleeves.) |
| NF A58-003-1999 |
铅及铅合金.建筑物用薄铅板 |
(Lead and lead alloys. Rolled lead sheet for building purposes.) |
| NF A58-004-2000 |
铅及铅合金.铅氧化物 |
(Lead and lead alloys - Lead oxides.) |
| NF A65-767-1981 |
镁合金制半成品.Ｕ形型材.尺寸公差和推荐尺寸 |
(Semi-finished products made of magnesium alloys. U-sections. Tolerances on dimensions and recommended dimensions.) |
| NF A66-001-1985 |
铸造产品.有色金属和合金.重力、低压和减压模铸件的尺寸公差 |
(Foundry products. Non ferrous metal and alloys. Cast products. Dimensional tolerances for gravity die castings, low pressure die castings and depression die castings.) |
| NF A66-002-1985 |
铸造产品.铝合金和锌合金.压力铸件的尺寸公差 |
(Foundry products. Aluminium alloys and zinc alloys. Cast products. Dimensional tolerances for pressure die castings.) |
| NF A70-010-1993 |
珠宝.戒指尺寸.定义、测量和名称与符号 |
(Jewellery. Ring-sizes. Definition, mesurage et designations.) |
| NF A70-020-1993 |
珠宝.贵金属合金的纯度 |
(JEWELLERY. FINENESS OF PRECIOUS METAL ALLOYS. (EUROPEAN STANDARD EN 29202).) |
| NF A70-021-2001 |
贵金属.与贵金属珠宝合金一起使用的钎料的精细度 |
(Precious metals - The finenesses of solders used with precious metal jewellery alloys.) |
| NF A72-115-1966 |
高炉附件.热风阀.阀盖和底座（PN6） |
(BLAST FURNACE ACCESSORIES. HOT AIR VALVES. DISCS AND SEATS,PN 6.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com