标准号 |
中文名称 |
英文名称 |
| NF C93-850-2-30-2003 |
光学纤维电缆.第2-30部分:室内光缆.光纤带状电缆类规范 |
(Optical fibre cables - Part 2-30 : indoor cables - Family specification for optical fibre ribbon cables.) |
| NF C93-850-3-2002 |
光缆.第3部分:分规范.户外电缆 |
(Optical fibres cables - Part 3 : sectional specification - Outdoor cables.) |
| NF C93-853-1991 |
光缆产品规范 |
(BLANK PRODUKT SPECIFICAITON FOR OPTICAL FIBRE CABLES.) |
| NF C93-855-2003 |
分规范:与电力传输线路一起使用的光缆(OCEPL) |
(Sectional specification : optical cables to be used along electrical power lines (OCEPL).) |
| NF C93-856-1991 |
电气设备的光缆产品规范 |
(PRODUCT SPECIFICATION FOR OPTICAL FIBRE CABLES INTENDED FOR USE IN ELECTRICAL INSTALLATIONS.) |
| NF C93-857-1997 |
光纤电缆管用材料 |
(MATERIAL USED IN TUBES FOR OPTICAL FIBRE CABLES.) |
| NF C93-858-1997 |
光纤电缆用介电强度构件 |
(DIELECTRIC STRENGTH MEMBER USED IN OPTICAL FIBRE CABLES.) |
| NF C93-859-1-2001 |
系列规范:用于管道或直接掩埋的光通讯电缆 |
(Familly Specification : optical telecommunication cables to be used in ducts or direct buried application.) |
| NF C93-859-2-2001 |
系列规范:光学架空通讯电缆 |
(Family Specification : optical aerial telecommunication cables.) |
| NF C93-859-3-2003 |
系列规范.室内用光学纤维电缆 |
(Family specification - Optical fibre cables for indoor applications.) |
| NF C93-859-4-2001 |
系列规范.河湖岔道等水下电缆用单模光缆 |
(Family specification - Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc.) |
| NF C93-859-5-2002 |
单膜光纤电缆(管道/直埋设备) |
(Single-mode optical fibre cable (duct/direct buried installation).) |
| NF C93-862-1-2001 |
光纤无源色散补偿器.第1部分:总规范 |
(Fibre optic passive dispersion compensators - Part 1 : generic specification.) |
| NF C93-863-1996 |
固定光纤衰减器空白详细规范 |
(Blank detail specification. Fixed fibre optic attenuators.) |
| NF C93-864-1-2000 |
光纤绝缘子.第1部分:总规范 |
(Fibre optic isolators - Part 1 : generic specification.) |
| NF C93-864-1998 |
分规范.光纤和电缆连接件装置.LSH型 |
(SECTIONAL SPECIFICATION : CONNECTORS SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSH. (EUROPEAN STANDARD EN 186270).) |
| NF C93-865-1998 |
分规范.光纤和电缆连接件装置.SC型 |
(SECTIONAL SPECIFICATION : CONNECTORS SETS FOR OPTICAL FIBRES AND CABLES. TYPE SC. (EUROPEAN STANDARD EN 186260).) |
| NF C93-867-10-1-2003 |
光纤通信系统中使用的连接器组件和互连件.产品规范.第10-1部分:端接于IEC 60793-2 B1.1类单模光纤上的MU- |
(Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1 : MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre.) |
| NF C93-867-2-1-2002 |
光纤通信系统中使用的接头组件和互连件.产品规范.第2-1部分:端接在IEC 60793-2的B1类单模纤维上的FC-PC型 |
(Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1 : type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre.) |
| NF C93-867-3-1-2002 |
光纤通信系统中使用的接头组件和互连件.产品规范.第3-1部分:端接在IEC 60793-2的A1a类和A1b类多模纤维上 |
(Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1 : type SG terminated on IEC 60793-2 category A1a and A1b multimode fibr) |
| NF C93-867-5-1-2003 |
光纤通信系统中使用的连接器组和互连件.产品规范.第5-1部分:端接在IEC 60793-2的B1.1类单模纤维上的EC型 |
(Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 5-1 : type EC terminated on IEC 60793-2 category B1.1 singlemode fibre.) |
| NF C93-867-9-1-2003 |
光纤通信系统中使用的连接器组件和互连件.产品规范.第9-1部分:端接于IEC 60793-2 A1a和A1b类多模光纤上的 |
(Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-1 : type MT-RJ terminated on IEC 60793-2 Category A1a and A1b multimode f) |
| NF C93-871-1987 |
发光二极管数字发射器 |
(DIGITAL TRANSMITTERS WITH LIGHT EMITTING DIODES.) |
| NF C93-872-1987 |
插脚式光电二极管数字接收器 |
(DIGITAL RECEIVERS WITH PIN PHOTODIODE.) |
| NF C93-883-1-2002 |
光纤有源件及器件.包装和接口标准.第1部分:总则和指南 |
(Fibre optic active components and devices - Package and interface standards - Part 1 : general and guidance.) |
| NF C93-883-10-2003 |
纤维光学有源件及器件.包装和接口标准.第10部分:SFF MU双20针无线电收发信机 |
(Fiber optic active components and devices - Package and interface standards - Part 10 : SFF MU duplex 20-pin transceivers.) |
| NF C93-883-2-2003 |
纤维光学有源件及器件.包装和接口标准.第2部分:SFF MT-RJ 10针无线电收发信机 |
(Fibre optic active components and devices - Package and interface standards - Part 2 : SFF MT-RJ 10-pin transceiver.) |
| NF C93-883-3-2003 |
纤维光学有源件及器件.包装和接口标准.第3部分:SFF MT-RJ 20针无线电收发信机 |
(Fibre optic active components and devices - Package and interface standards - Part 3 : SFF MT-RJ 20-pin transceivers.) |
| NF C93-883-4-2003 |
纤维光学有源件及器件.包装和接口标准.第4部分:PN 1 x 9塑料光学纤维无线电收发信机 |
(Fibre optic ative components and devices - Package and interface standards - Part 4 : PN 1 x 9 plastic optical fibre transceivers.) |
| NF C93-883-5-2003 |
纤维光学有源件及器件.包装和接口标准.第5部分:SC 1纤维光学模数 |
(Fibre optic active components and devices - Package and interface standards - Part 5 : SC 1 x 9 fibre optic module.) |
| NF C93-883-7-2003 |
纤维光学有源件及器件.包装和接口标准.第7部分:SFF LC 10针无线电收发信机 |
(Fibre optic active components and devices - Package and interface standards - Part 7 : SFF LC 10-pin transceivers.) |
| NF C93-883-8-2003 |
纤维光学有源件及器件.包装和接口标准.第8部分:SFF LC 20针无线电收发信机 |
(Fibre optic active components and devices - Package and interface standards - Part 8 : SFF LC 20-pin transceivers.) |
| NF C93-883-9-2003 |
纤维光学有源件及器件.包装和接口标准.第9部分:SFF MU双10针无线电收发信机 |
(Fiber optic active components and devices - Package and interface standards - Part 9 : SFF MU duplex 10-pin transceivers.) |
| NF C93-884-4-2003 |
纤维光学有源件和器件.性能标准.第4部分:千兆比特以太网用1300nm纤维光学无线电收发信机 |
(Fibre optic active components and devices - Performance standards - Part 4 : 1 300 nm fibre optic transceivers for Gigabit Ethernet application.) |
| NF C93-890-1-2000 |
光纤衰减器.第1部分:总规范 |
(Fibre optic attenuators - Part 1 : generic specification.) |
| NF C93-900-17-1998 |
光纤和电缆连接件.第17部分:光纤连接件分规范.F-05型 |
(Connectors for optical fibres and cables. Part 17 : sectional specification for fibre optic connector. Type F-05 (friction lock).) |
| NF C93-901-1997 |
光纤互联装置和无源件.基本试验和测量过程.第1部分:常规和指南 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 1 : general and guidance.) |
| NF C93-902-1-1997 |
光纤互联装置和无源件.基本试验和测量过程.第2-1部分:试验.振动(正弦的) |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-1 : tests. Vibration (sinusoidal).) |
| NF C93-902-10-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-10部分:试验.抗挤压 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-10 : tests. Crush resistance.) |
| NF C93-902-11-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-11部分:试验.轴向压力 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-11 : tests. Axial compression.) |
| NF C93-902-12-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-12部分:试验.冲压 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-12 : tests. Impact.) |
| NF C93-902-13-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-13部分:试验.加速度 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-13 : tests. Acceleration.) |
| NF C93-902-14-1997 |
光纤互连设备和无源件.基本试验和测量程序.第2部分第14节:最大输入功率 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-14 : tests. Maximum input power.) |
| NF C93-902-15-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-15部分:试验.连接机械的扭矩强度 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-15 : tests. Torque strength of coupling mechanism.) |
| NF C93-902-16-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-16部分:试验.去皮增大 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-16 : tests. Moult growth.) |
| NF C93-902-17-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-17部分:试验.冷却 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-17 : tests. Cold.) |
| NF C93-902-18-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-17部分:试验.干热.耐高温 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-18 : tests. Dry heat. High temperature endurance.) |
| NF C93-902-19-1997 |
光纤互联装置和无源件.基本试验和测量过程.第2-19部分:试验.阻尼热(稳定状态) |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-19 : tests. Damp heat (steady state).) |
| NF C93-902-2-1997 |
光纤互联装置和无源件.基本试验和测量过程.第2-2部分:试验.配合持久性 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-2 : tests. Mating durability.) |
| NF C93-902-20-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-20部分:试验.气候顺序 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-20 : tests. Climatic sequence.) |
| NF C93-902-21-1997 |
光学纤维互联件和无源件.基本试验和测量过程.第2-21部分:试验.复合温度-湿度周期试验 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-21 : tests. Composite temperature humidity cyclic test.) |
| NF C93-902-22-1997 |
纤维光学互联装置和无源件.基本试验和测量过程.第2-22部分:试验.温度变化 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-22 : tests. Change of temperature.) |
| NF C93-902-23-1997 |
光学纤维互联件和无源件.基本试验和测量过程.第2-23部分:试验.纤维光学装置非压力封闭密封 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-23 : tests. Sealing for non-pressurized closures of fibre optic devices.) |
| NF C93-902-24-2000 |
光纤互连装置和无源部件.基本试验和测量步骤.第2-24部分:通过应力应用对陶瓷排列分裂的屏幕试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24 : tests - Screen testing of ceramic alignment split sleeve by stress application.) |
| NF C93-902-25-1998 |
纤维光学连接装置和无源件.基本试验和测量程序.第2-25部分:试验.闭合的密封持久性(欧洲标准EN 61 300-2-2 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-25 : tests. Sealing endurance for closures.) |
| NF C93-902-26-1998 |
纤维光学连接装置和无源件.基本试验和测量程序.第2-26部分:试验.盐雾(欧洲标准EN 61 300-2-26) |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-26 : tests. Salt mist.) |
| NF C93-902-27-1998 |
光纤互连装置和无源部件.基本试验和测量步骤.第2-27部分:试验.灰尘.层流 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-27 : tests. Dust. Laminar flow.) |
| NF C93-902-28-1998 |
纤维光学连接装置和无源件.基本试验和测量程序.第2-28部分:试验.工业气体(二氧化硫)(欧洲标准EN 61 300-2 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-28 : tests. Industrial atmosphere (sulphur dioxide).) |
| NF C93-902-29-1998 |
纤维光学互联装置和无源件.基本试验和测量过程.第2-29部分:试验.低空气压 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-29 : tests. Low air pressure.) |
| NF C93-902-3-1997 |
光纤互联装置和无源件.基本试验和测量过程.第2-3部分:试验.静态剪切负载 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-3 : tests. Static shear load.) |
| NF C93-902-30-1998 |
纤维光学连接装置和无源件.基本试验和测量程序.第2-30部分:试验.阳光辐照(欧洲标准EN 61 300-2-30) |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-30 : tests. Solar radiation.) |
| NF C93-902-31-1998 |
光纤互连装置和无源部件.基本试验和测量步骤.第2-31部分:试验.核辐射 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-31 : tests. Nuclear radiation.) |
| NF C93-902-32-1998 |
纤维光学连接装置和无源件.基本试验和测量程序.第2-32部分:试验.水蒸气渗透(欧洲标准EN 61 300-2-32) |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-32 : tests. Water vapour permeation.) |
| NF C93-902-33-1998 |
纤维光学互联装置和无源件.基本试验和测量过程.第2-33部分:试验.隔板的组装和非组装 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-33 : tests. Assembly and dissassembly of closures.) |
| NF C93-902-34-1998 |
纤维光学连接装置和无源件.基本试验和测量程序.第2-34部分:耐溶剂和污染性液体试验(欧洲标准EN 61 300-2- |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-34 : tests. Resistance to solvents and contaminating fluids.) |
| NF C93-902-35-1998 |
光纤互连设备和无源件.基本试验和测量程序.第2部分第35节:试验.电缆章动 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-35 : tests. Cable nutation.) |
| NF C93-902-36-1998 |
光纤互连设备和无源件.基本试验和测量程序.第2部分第36节:试验.易燃性(火灾危害) |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-36 : tests. Flammability (fire hazard).) |
| NF C93-902-37-1998 |
光纤互连设备和无源件.基本试验和测量程序.第2部分第37节:试验.闭合用电缆抗弯性 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-37 : tests. Cable bending for closures.) |
| NF C93-902-38-1998 |
光纤互连设备和无源件.基本试验和测量程序.第2部分第38节:试验.纤维光学设备的压合密封 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-38 : tests. Sealing for pressurized closures of fibre optic devices.) |
| NF C93-902-39-1997 |
光纤互连设备和无源件.基本试验和测量程序.第2部分第39节:试验.外部磁场的灵敏性 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-39 : tests. Susceptibility to external magnetic fields.) |
| NF C93-902-4-1997 |
光纤互联装置和无源件.基本试验和测量过程.第2-3部分:试验.纤维/电缆滞留 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-4 : tests. Fibre/cable retention.) |
| NF C93-902-40-2001 |
光纤互联装置和无源部件.基本试验和测量步骤.第2-40部分:试验.单模式调谐有角度光纤互联器衰减的筛析试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-40 : tests - Screen testing of attenuation of single-mode tuned angled optical connectors.) |
| NF C93-902-42-1999 |
光纤互连装置和无源件.基本试验和测量过程.第2-42部分:连接器的边缘静荷载 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-42 : static side load for connectors.) |
| NF C93-902-43-2000 |
.第2-43部分:试验.单模PC光纤连接器回波损耗的筛选 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43 : tests - Screen testing of return loss of single mode PC optical fibre connector.) |
| NF C93-902-45-2000 |
光纤互连器件和无源件.基本试验和测量程序.第2-45部分:浸水耐久性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45 : tests - Durability test by water immersion.) |
| NF C93-902-5-1997 |
纤维光学互连装置和无源件.基本检验和测量程序.第2-5部分:检验.扭矩/绕转 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-5 : tests. Torsion/twist.) |
| NF C93-902-6-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-6部分:检验.联接装置的抗拉强度. |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-6 : tests. Tensile strength of coupling mechanism.) |
| NF C93-902-7-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-7部分:试验.弯矩 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-7 : tests. Bending moment.) |
| NF C93-902-8-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-8部分:试验.撞击 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-8 : tests. Bump.) |
| NF C93-902-9-1997 |
纤维光学连接装置和无源件.基本检验和测量程序.第2-9部分:试验.冲击 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-9 : tests. Shock.) |
| NF C93-903-1-1998 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第1节:检验和测量.外观检查 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-1 : examinations and measurements. Visual examination.) |
| NF C93-903-10-1998 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第10节:检验和测量.仪表保持力 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-10 : examinations and measurements. Gauge retention force.) |
| NF C93-903-11-1998 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第11节:检验和测量.啮合力和分离力 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-1 : examinations and measurements. Engagement and separation forces.) |
| NF C93-903-12-1997 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第12节:检验和测量.由单模式光纤件衰减产生的偏振:点 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-12 : examinations and measurements. Polarization dependence of attenuation of a single-mode fibre optic component : matrix calculation method.) |
| NF C93-903-13-1998 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第13节:检验和测量.纤维光学开关的控制稳定性 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-13 : examinations and measurements. Control stability of a fibre optic switch.) |
| NF C93-903-14-1998 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第14节:检验和测量.可变衰减器衰减设置的准确度和可重 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-14 : examinations and measurements. Accuracy and repeatability of the attenuation settings of a variable attenuator.) |
| NF C93-903-15-1998 |
光纤连接装置和无源件.基本试验和测量过程.第3-15部分:检验和测量.凸型刨光金属箍偏心率 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-15 : examinations and measurements. Eccentricity of a convex polished ferrule endface.) |
| NF C93-903-16-1998 |
光纤连接装置和无源件.基本试验和测量过程.第3-16部分:检验和测量.球面刨光金属箍的半径 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-16 : examinations and measurements. Endface radius of spherically polished ferrules.) |
| NF C93-903-17-2000 |
光纤互联装置和无源部件.基本试验和测量步骤.第3-17部分:检查和测量.抛光套圈角的端面角 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17 : examinations and measurements - Endface angle of angle-polished ferrules.) |
| NF C93-903-18-1998 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第18节:检验和测量.角端面连接器的键控准确度 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-18 : examinations and measurements. Keying accuracy of an angled endface connector.) |
| NF C93-903-19-1997 |
光学纤维互联件和无源件.基本试验和测量过程.第3-19部分:检验和测量.单模纤维光学件回复损失的极化依 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-19 : examinations and measurements. Polarization dependence of return loss of a single mode fibre optic component.) |
| NF C93-903-2-2000 |
光纤互联装置和无源件.基本试验和测量步骤.第3-2部分:检验和测量.单模纤维光学装置的偏振-衰减曲线 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2 : examinations and measurements - Polarization dependence of attenuation in a single-mode) |
| NF C93-903-21-1998 |
光纤互联装置和无源件.基本试验和测量过程.第3-21部分:检验和测量.开关时间和回跳时间 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-21 : examinations and measurements. Switching time and bounce time.) |
| NF C93-903-22-1997 |
光学纤维互联件和无源件.基本试验和测量过程.第3-22部分:检验和测量.金属箍压力 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-22 : examinations and measurements. Ferrule compression force.) |
| NF C93-903-23-1998 |
光纤互联装置和无源件.基本试验和测量过程.第2-23部分:检验和测量.与金属箍有关的纤维位置(EN 61300-3-23 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-23 : examination and measurements. Fibre position relative to ferrule endface.) |
| NF C93-903-24-2000 |
光纤互连装置和无源部件.基本试验和测量步骤.第3-24部分:检验和测量.极性维护光纤用光学连接件的关键精确度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24 : examinations and measurements - Keying accuracy of optical connectors for polarization) |
| NF C93-903-25-1997 |
光学纤维互联件和无源件.基本试验和测量过程.第3-25部分:检验和测量.金属箍和安装光纤的金属箍的同心性 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-25 : examinations and measurements. Concentricity of the ferrules and ferrules with fibre installed.) |
| NF C93-903-26-1997 |
光学纤维互联件和无源件.基本试验和测量过程.第3-26部分:光纤和金属箍轴之间角度不重合性的测量 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-26 : examinations and measurements. Measurement of the angular misalignment between fibre and ferrules axes.) |
| NF C93-903-26-2003 |
光纤互连设备和无源件.基本试验和测量程序.第3-26部分:检验和测量.光纤和金属加固环轴线间角度误差的测量 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-26 : examinations and measurements - Measurement of the angular misalignment between fibre a) |
| NF C93-903-27-1997 |
光纤互连装置和无源件.基本试验和测量过程.3-27过程:检验和测量.多路连接插头孔定位测量方法(欧洲标准EN6 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-27 : examinations and measurements. Measurement method for the hole location of a multiway connector plug.) |
| NF C93-903-28-2002 |
纤维光学内连接器件和无源件.基本试验和测量程序.第3-28部分:检验和测量.瞬态损耗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28 : examinations and measurements - Transient loss.) |
| NF C93-903-3-1997 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第3节:检验和测量.衰减和(多路)回波损耗的监控 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-3 : examinations and measurements. Monitoring change in attenuation and in return loss (multiple paths).) |
| NF C93-903-31-2003 |
纤维光学互连器件和无源件.基本试验和测量程序.第3-34部分:检验和测量.纤维光学源的耦合功率比测量 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31 : examinations and measurements - Coupled power ratio measurement for fibre optic sources) |
| NF C93-903-33-2000 |
光纤互连器件和无源件.基本试验和测量程序.第3-33部分:检查和测量.套管分离力 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33 : examinations and measurements - Ferrule withdrawal force.) |
| NF C93-903-34-1998 |
纤维光学互联装置和无源件.基本试验和测量过程.第3-34部分:检验和测量.随机配对连接器的衰减 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-34 : examinations and measurements. Attenuation of random mated connectors.) |
| NF C93-903-36-2000 |
光纤互连装置和无源部件.基本试验和测量步骤.第3-36部分:检验和测量.纤维光学连接器金属箍的内外径测量方法 |
(Fibre optic interconnecting devices and passives components - Basic test and measurement procedures - Part 3-36 : examinations and measurements - measurrement methods for the inside and outside diamet) |
| NF C93-903-39-1998 |
纤维光学互联装置和无源件.基本试验和测量过程.第3-39部分:试验,检验和测量.PC-光学连接器参考插座的选择 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-39 : tests. Examinations and measurements. PC optical connector reference plug selection.) |
| NF C93-903-4-2001 |
光纤互联装置和无源部件.基本试验和测量程序.第3-4部分:检验和测量.衰减 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4 : examination and measurements - Attenuation.) |
| NF C93-903-6-1997 |
光纤互连器件和无源件.基本试验和测量规程.第3-6部分:检验和测量.回程损耗 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-6 : examinations and measurements. Return loss.) |
| NF C93-903-6/A1-1998 |
NF EN 61300-3-6-1997的修改1 |
() |
| NF C93-903-6/A2-2002 |
光纤互连器件和无源件.基本试验和测量规程.第3-6部分:检验和测量.回程损耗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6 : examinations and measurements - Return loss.) |
| NF C93-903-61-1998 |
NF C93-903-6的补充件1 |
() |
| NF C93-903-8-1998 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第8节:检验和测量.环境光感受性 |
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-8 : examinations and measurements. Ambient light susceptibility.) |
| NF C93-903-9-1997 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第9节:检验和测量.远端串音 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-9 : examinations and measurements. Far-end crosstalk.) |
| NF C93-909-021-2-2002 |
光纤互连器件和无源部件性能标准.第021-2部分:终接在C类单模光纤的连接器.受控环境 |
(Fibre optic interconnecting devices and passive component performance standard - Part 021-2 : fibre optic connectors terminated on single-mode fibre for category C - Controlled environment.) |
| NF C93-909-051-3-2002 |
纤维光学内连接器件和无源件性能标准.第051-3部分:U类用单膜光纤和插座式固定衰减器.非环境控制 |
(Fibre optic interconnecting devices and passive components performance standard - Part 051-3 : single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment.) |
| NF C93-909-052-3-2002 |
纤维光学内连接器件和无源件性能标准.第052-3部分:U类用单膜光纤和尾式固定衰减器.非环境控制 |
(Fibre optic interconnecting devices and passive components performance standard - Part 052-3 : single-mode fibre, pigtailed-style fixed attenuators for category U - Uncontrolled environment.) |
| NF C93-909-1-1-2001 |
光纤互连装置和无源件性能标准.第1-1部分:总则和指南.互连装置(接头) |
(Fibre optic interconnecting devices and passive components peformance standard - Part 1-1 : general and guidance - Interconnecting devices (connectors).) |
| NF C93-909-2-1-2001 |
光纤互连装置和无源部件性能标准.第2-1部分:端接于U等级单模纤维的光纤连接器.非受控环境 |
(Fibre optic interconnecting devices and passive components performance standard - Part 2-1 : fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment.) |
| NF C93-910-1-1997 |
光纤连接器接口.第1部分:概述和导则 |
(Fibre optic connector interfaces. Part 1 : general and guidance.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com