标准号 |
中文名称 |
英文名称 |
| NF L22-537-1975 |
埋头内锁紧系留螺母.单耳双埋孔.国际单位米制螺纹 |
(Self-locking anchor nuts, countersunk type, single lug with two holes. Sim thread (rech.).) |
| NF L22-538-1975 |
埋头内锁紧系留螺母.单耳双埋孔.国际单位米制螺纹 |
(Self-locking anchor nuts, countersunk type, single lug with two countersunk rivet holes. Sim thread (rech.).) |
| NF L22-540-1954 |
内锁紧系留螺母带 |
(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT. (RECH.).) |
| NF L22-541-2001 |
航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹自锁紧六角头螺母.等级:1100MPa(室温)/235℃或 |
() |
| NF L22-542-1966 |
航空用螺拴螺母.内锁紧六角螺母.最高温度：１２０℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING HEXAGON NUTS. MAXIMUM TEMPERATURE : 120 DEGREES C.) |
| NF L22-543-1975 |
内锁紧系留螺母.双耳.国际单位米制螺纹 |
(Self-locking anchor nuts, two lugs. Sim thread (rech.).) |
| NF L22-544-1975 |
内锁紧系留螺母.双耳.多埋孔.国际单位米制螺纹 |
(Self-locking anchor nuts, two lugs with countersunk rivet holes. Sim thread (rech.).) |
| NF L22-545-1975 |
内锁紧系留螺母.单耳单孔.国际单位米制螺纹 |
(Self-locking anchor nuts, single lug with one hole. Sim thread (rech.).) |
| NF L22-546-1975 |
内锁紧系留螺母.单耳单埋孔.国际单位米制螺纹 |
(Self-locking anchor nuts, single lug with countersunk rivet hole. Sim thread (rech.).) |
| NF L22-547-1975 |
内锁紧系留螺母.单耳双孔.国际单位米制螺纹 |
(Self-locking anchor nuts, single lug with two holes. Sim thread (rech.).) |
| NF L22-548-1975 |
内锁紧系留螺母.单耳双埋孔.国际单位米制螺纹 |
(Self-locking anchor nuts, single lug with two countersunk rivet holes. Sim thread (rech.).) |
| NF L22-551-1985 |
双耳内锁紧系留螺母.分类MPa１２３５℃和４２５℃.ISO螺纹 |
(Self-locking anchor nuts, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-552-1985 |
单耳双孔内锁紧系留螺母.分类９００MPa１２３５℃和１２５℃.ISO螺纹 |
(Self-locking anchor nuts, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-553-1985 |
９０度角内锁紧系留螺母.分类900 MPa / 235℃425℃ .ISO螺纹 |
(Self-locking anchor nuts, 90 degrees corner classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-555-1985 |
双耳内锁紧系留扁螺母.分类900 MPa / 235℃ 和425℃ .ISO螺纹 |
(Self-locking anchor nuts, miniature series, two lugs. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-556-1985 |
单耳内锁紧系留扁螺母.分类900 MPa / 235℃ 和425℃ .ISO螺纹 |
(Self-locking anchor nuts, miniature series, single lug. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-558-1966 |
航空用螺拴螺母.内锁紧系留螺母.埋头型，双耳.最高温度：２６０℃--４２５℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE WITH TWO LUGS. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.) |
| NF L22-559-1966 |
航空用螺拴螺母.内锁紧系留螺母.埋头型、单耳双孔.最高温度:２６０℃-４２５℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,SINGLE LUG WITH TWO HOLES. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.) |
| NF L22-560-1966 |
航空用ISO螺纹螺拴螺母.内锁紧系留螺毋.９０度角埋头型.最高温度：２６０℃-２５℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,90 DEGREES ANGLE. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.) |
| NF L22-561-1985 |
双耳浮动型内锁紧系留螺母.分类900 MPa /235℃和425℃ .ISO螺纹 |
(Self-locking anchor nuts, floating, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-562-1985 |
单耳双孔浮动型自锁紧系留螺母.分类900 MPa / 235℃忖和425℃ .ISO螺纹 |
(Self-locking anchor nuts, floating, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-564-1985 |
内锁紧系留母带.分类900 MPa/120℃和235℃ |
(Gang channel self-locking nuts classification 900 MPa/120 degrees C and 235 degrees C. ISO thread.) |
| NF L22-565-1979 |
内锁紧系留螺母带.深槽最高使用温度１２０℃.ISO螺纹 |
(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 120 DEGREES C. ISO THREAD.) |
| NF L22-566-1979 |
自锁紧系留螺母带.深槽.最高使用温度２３５℃.ISO螺纹 |
(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 235 DEGREES C. ISO THREAD.) |
| NF L22-567-2001 |
航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹、带扩孔的双耳自锁紧固定螺母.等级:1100MPa(室 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) |
| NF L22-568-2000 |
航空用螺栓和螺母.单耳埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat) |
| NF L22-569-2000 |
航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeer) |
| NF L22-570-2000 |
航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempera) |
| NF L22-571-2000 |
航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 |
(Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at am) |
| NF L22-572-2000 |
航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-573-2000 |
航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温) |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-574-2000 |
航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa () |
| NF L22-575-2000 |
航空用螺栓和螺母.双耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t) |
| NF L22-576-2000 |
航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien) |
| NF L22-577-2000 |
航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M) |
| NF L22-587-2000 |
航空用螺栓和螺母.双耳埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/235 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperatu) |
| NF L22-588-2000 |
航空用螺栓和螺母.镀银不锈钢制深槽单耳内锁紧系留螺母.ISO M或ISO MJ螺纹.分类:1100 MPa/425度(室温下) |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-589-2000 |
航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/23 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe) |
| NF L22-590-2000 |
航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/42 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-591-2000 |
航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a) |
| NF L22-592-2000 |
航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (a) |
| NF L22-593-2000 |
航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa () |
| NF L22-594-2000 |
航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa) |
| NF L22-595-2000 |
航空用螺栓和螺母.双耳扁埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient) |
| NF L22-596-2000 |
航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/ |
(Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambien) |
| NF L22-711-1975 |
带销孔的国际单位米制螺纹实心轴 |
(Solid pins, sim thread, with split pin hole (rech.).) |
| NF L22-712-1975 |
带销孔的国际单位米制螺纹轻型轴 |
(Hollow pins, sim thread, with split pin hole (rech.).) |
| NF L22-713-1975 |
无销孔国际单位米制螺纹实心轴 |
(Solid pins, sim thread, without split pin hole (rech.).) |
| NF L22-714-1975 |
无销孔国际单位米制螺纹轻型轴 |
(Hollow pins, sim thread, without split pin hole (rech.).) |
| NF L22-718-1989 |
航天系列.带头和过盈公差的光轴 |
(Aerospace series. Pins, shear, headed, close tolerance.) |
| NF L22-719-1975 |
光轴.尺寸 |
(Plain shackle pins. Dimensions.) |
| NF L22-720-1954 |
光轴 |
(PLAIN SHACKLE PINS. (RECH.).) |
| NF L22-721-1966 |
飞行器紧固件.带开口销孔的实心螺纹销.ISO螺纹.(RECH.) |
(AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-722-1966 |
飞行器紧固件.带开口销孔的空心螺纹销.ISO螺纹.(RECH.) |
(AIRCRAFT FASTENERS. HOLLOW PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-723-1966 |
飞行器紧固件.无开口销孔的实心螺纹销.ISO螺纹.(RECH.) |
(AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITHOUT SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-731-1974 |
带销孔的实心ISO螺纹轴 |
(Solid pins, ISO thread, with split pin hole.) |
| NF L22-731M1-1974 |
有销孔的ISO 螺纹实心轴 |
(ISO THREAD SOLID SHAFT WITH PIN HOLE.) |
| NF L22-732-1979 |
带销孔的轻型ISO螺纹轴 |
(HOLLOW PINS,ISO THREAD,WITH SPLIT PIN HOLE.) |
| NF L22-733-1974 |
无销孔的实心ISO螺纹轴 |
(Solid pins, ISO thread, without split pin hole.) |
| NF L22-733M1-1974 |
没有销孔的 ISO 螺纹实心轴 |
(ISO THREAD SOLID SHAFT WITHOUT PIN HOLE.) |
| NF L22-740-1992 |
航空航天系列.合金钢制带头的销钉,紧公差杆.技术规范 |
(Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification.) |
| NF L22-750-1954 |
润滑轴 |
(LUBRICATING PINS. (RECH.).) |
| NF L23-112-1981 |
航空用埋头窄平垫圈 |
(Countersunk narrow plain washers.) |
| NF L23-113-1975 |
厚平垫圈.老式(英寸) |
(Thick plain washers. Old type (rech.).) |
| NF L23-114-1975 |
渐减式平垫圈.老式(英寸) |
(Reduced plain washers. Old type (rech.).) |
| NF L23-115-1975 |
渐减式厚平垫圈.老式(英寸) |
(Reduced and thick plain washers. Old type (rech.).) |
| NF L23-118-1969 |
中等厚度平垫圈 |
(PLAIN WASHERS,HI-THICK.) |
| NF L23-119-1969 |
厚平垫圈 |
(THICK PLAIN WASHERS.) |
| NF L23-120-1954 |
有凹孔的垫圈(英寸) |
(WASHERS WITH COUNTERBORE. (RECH.).) |
| NF L23-134-1969 |
平垫圈,外径渐减 |
(PLAIN WASHERS,REDUCED OUTSIDE DIAMETER.) |
| NF L23-142-1966 |
航空飞行器紧固件.斜面厚垫圈 |
(AIRCRAFT FASTENERS. THICK CHAMFERED WASHERS.) |
| NF L23-161-1996 |
航空系列.阳极氧化或铬酸钝化的铝合金平垫圈 |
(Aerospace series. Washers, flat, in aluminium alloy, anodized or chromated.) |
| NF L23-162-2000 |
航空和航天.镀镉平钢垫圈 |
(Aerospace series - Washers, flat, in steel, cadmium plated.) |
| NF L23-163-1989 |
航空系列.钢制耐热平垫圈(EN2139) |
(AEROSPACE SERIES. WASHERS,FLAT,HEAT RESISTING STEEL. (EUROPEAN STANDARD EN 2139).) |
| NF L23-164-1995 |
航空系列.镀镉合金钢用凹形垫片 |
(AEROSPACE SERIES. WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED. (EUROPEAN STANDARD EN 2648).) |
| NF L23-165-1996 |
航空系列.铝合金制阳极化或铬酸钝化的大外径平垫圈 |
(AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED. (EUROPEAN STANDARD EN 2912).) |
| NF L23-166-2000 |
航空和航天.钢制镀镉的大直径平垫圈 |
(Aerospace series - Washers, flat, large diameter, in steel, cadmiumplated.) |
| NF L23-167-1996 |
航空系列.耐高温钢制钝化的大外径平垫圈 |
(AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN HEAT RESISTING STEEL, PASSIVATED. (EUROPEAN STANDARD EN 2914).) |
| NF L23-168-1996 |
航空系列.耐高温钢制钝化平垫圈 |
(AEROSPACE SERIES. WASHERS, FLAT, IN HEAT RESISTING STEEL, PASSIVATED. (EUROPEAN STANDARD EN 2998).) |
| NF L23-201-1975 |
轴向安装止动环.外装型 |
(Retaining rings for shafts, external type.) |
| NF L23-201/A1-1979 |
杆用止推环 |
(RETAINING RING FOR SHAFTS.) |
| NF L23-2011-1979 |
轴挡圈.内装型 |
(RETAINING RING FOR SHAFTS.) |
| NF L23-202-1975 |
轴向定装止动环.内装型 |
(Retaining rings for shafts, internal type.) |
| NF L23-202/A1-1979 |
镗孔用止推环 |
(RETAINING RING FOR BORES.) |
| NF L23-2021-1979 |
轴孔挡圈 |
(RETAINING RING FOR BORES.) |
| NF L23-203-1975 |
径向安装止动环 |
(Retaining rings for bearings.) |
| NF L23-211-1979 |
轴向安装止动环.技术规范 |
(RETAINING RINGS FOR SHAFTS. TECHNICAL SPECIFICATION.) |
| NF L23-213-1980 |
轴向安装止动环.技术规范 |
(RETAINING RINGS FOR BEARINGS. TECHNICAL SPECIFICATION.) |
| NF L23-250-1996 |
航空系列.止动环.交货技术条件 |
(AEROSPACE SERIES. RINGS, RETAINING. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 3380).) |
| NF L23-310-1977 |
航空飞行器紧固件.开口销 |
(AIRCRAFT FASTENERS. SPLIT PINS.) |
| NF L23-311-1989 |
航空系列.EN 2753钢制开口销(EN 2367) |
(AEROSPACE SERIES. SPLIT PINS IN STEEL EN 2753. (EUROPEAN STANDARD EN 2367).) |
| NF L23-320-2000 |
航空航天.锁紧丝 |
(Aerospace - Lockwire.) |
| NF L23-321-2000 |
航空航天.卡簧铜丝 |
(Aerospace - Snapwire, in copper.) |
| NF L23-340-1971 |
止动销 |
(LOCK PINS.) |
| NF L23-350-1966 |
飞行器紧固件.钢板制带耳的止动垫圈.平型 |
(AIRCRAFT FASTENERS. TAB WASHERS MADE OF STEEL PLATE,FLAT TYPE.) |
| NF L23-351-1966 |
飞行器紧固件.钢板制外部带耳的止动垫圈 |
(AIRCRAFT FASTENERS. EXTERNAL TAB WASHERS MADE OF STEEL PLATE.) |
| NF L23-352-1974 |
航空用螺拴螺母.翼板销紧垫圈 |
(Tab washers with long tab.) |
| NF L23-353-1997 |
航空航天系列.钝化耐热钢销紧垫圈(欧洲标准EN 2948) |
(Aerospace series. Washers, tab, in heat resisting steel, passivated.) |
| NF L23-354-1997 |
航空航天系列.钝化耐腐蚀钢线锁紧垫圈(欧洲标准EN 2949) |
(Aerospace series. Washers, wire locking, in corrosion resisting steel, passivated.) |
| NF L24-008-1996 |
航空航天系列.自锁锯齿柄螺母.安装方法 |
(Aerospace series. Shank nuts, self-locking, serrated. Installation procedure.) |
| NF L24-009-1996 |
航空航天系列.自锁紧锯齿柄螺母用安装孔.设计标准(欧洲标准EN 3065) |
(Aerospace series. Installation holes for self-locking, serrated shank nuts. Design standard.) |
| NF L24-020-1989 |
航空和航天.1100MPa强度级和MJ螺纹合金钢螺钉.供应品的规范 |
(AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-025-1989 |
航天.突出头合金钢螺钉.1250MPa强度的等级和MJ螺纹.供应品的规范 |
(AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-030-1997 |
航空航天系列.镍基合金NI-PH2601(铬镍铁合金718)制耐热MJ螺纹螺栓.等级:1275MPA(室温)/650℃.技术规范(欧洲 |
(AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).) |
| NF L24-101-1994 |
航空航天系列.钝化耐热和抗腐蚀短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/425度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) /425 DEGREES C. (EUROPEAN STANDARD EN 3052).) |
| NF L24-102-1997 |
航空和航天系列.凸台,细六角头,紧配合公差柄,短螺纹,阳极化,MOS2润滑,钛合金制螺栓.等级:1100MPA(室温下)/3 |
(Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-103-1995 |
航空航天系列.阳极化、MOS2润滑的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/315度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).) |
| NF L24-104-1995 |
航空航天系列.镀镉合金钢的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/235度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).) |
| NF L24-105-1995 |
航空航天系列.钝化耐腐蚀钢的短螺纹紧公差标准手柄标准六角螺栓.分类:600MPA(环境温度)/425度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2887).) |
| NF L24-106-1995 |
航空航天系列.钝化耐腐蚀钢的短螺纹粗公差标准手柄标准六角螺栓.分类:600MPA(环境温度)/425度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2888).) |
| NF L24-107-1995 |
航空航天系列.镀镉合金钢的短螺纹粗公差标准手柄标准六角螺栓.分类:900MPA(环境温度)/235度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).) |
| NF L24-108-1995 |
航空航天系列.镀镉合金钢的带螺纹头的标准六角螺栓.分类:900MPA(环境温度)/235度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).) |
| NF L24-109-1997 |
航空航天系列.阳极化MOS2润滑钛合金制标准六角头、螺纹头螺丝.等级:1100MPA(室温)/315℃(欧洲标准EN 3308) |
(AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).) |
| NF L24-112-1994 |
航空和航天系列.耐热钢FE-PA92HT(A286)用螺旋,六角头及螺纹头.分类.900MPa(室温)/650℃ |
(AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2937).) |
| NF L24-113-1996 |
航空航天系列.镀银FE-PA92HT(A286)耐高温钢制螺纹到底部的六角螺钉.分类:900MPa(室温下)/650℃ |
(AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2938).) |
| NF L24-114-1994 |
航空和航天系列.耐热钢FE-PA92HT(A286)用100°埋头螺钉,偏置式十字形凹口及螺纹头.分类.900MPa(室温)/650℃ |
(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 CELSIUSGRADE. (NORM EUROPEAN STANDARD EN 2939).) |
| NF L24-115-1996 |
航空航天系列.镀银耐热钢FE-PA92HT(A286)100°埋头偏置式十字形凹口螺纹到底部的螺钉.分类.900MPa(室温)/65 |
(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM ECESS, THREADED TO HEAD, IN HEAT RESISTING TEEL E-PA92HT(A286),SILVERPLATED.CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2940).) |
| NF L24-116-1994 |
航空和航天系列.耐热钢FE-PA92HT(A286)用螺栓,六角头,后角刀,长螺纹.分类.900MPa(室温)/650℃ |
(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3006).) |
| NF L24-117-1996 |
航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细杆六角螺丝钉.等级900MPa(室温下)/650℃ |
(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3007).) |
| NF L24-118-1998 |
航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P100HT(INCONEL 718).分类:1275MPA(在环境温度下)/65 |
(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com