标准号 |
中文名称 |
英文名称 |
NF A49-150-2003 |
包括人类生活用水在内的水成液的传送用非合金钢管和管接头.技术交货条件 |
(Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
NF A49-151-2003 |
包括饮用水在内的含水液体输送用焊接不锈钢管.交货技术件 |
(Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
NF A49-160-1979 |
钢管.混凝土包的加热板用的焊接钢管.(尺寸.交货技术条件.) |
(STEEL TUBES. WELDED TUBES FOR HEATING PANELS ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-170-1-1999 |
对缝焊接管道配件.第1部分:一般使用和无特殊检验要求的锻碳钢 |
(Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general use and without specific inspection requirements.) |
NF A49-189-1980 |
钢管.90度镀锌3d样式的焊接曲线.(尺寸.交货技术条件.) |
(STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-191-1975 |
钢管.毛细管焊接或焊接钎接用钢或铸铁接头.(尺寸.交货技术条件.) |
(STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-192-1981 |
钢管.压力容器用内螺纹非合金钢焊接套管 |
(STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.) |
NF A49-195-2001 |
螺纹钢管配件 |
(Steel threaded pipe fittings.) |
NF A49-200-1-2002 |
无缝压力钢管.交货技术条件.第1部分:规定室温特性的非合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
NF A49-200-2-2002 |
无缝压力钢管.交货技术条件.第2部分:规定高温特性的非合金和合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties.) |
NF A49-200-3-2002 |
无缝压力钢管.交货技术条件.第3部分:合金细晶粒结构钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
NF A49-200-4-2002 |
无缝压力钢管.交货技术条件.第4部分:规定低温特性的合金和非合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4 : non-alloy and alloy steel tubes with specified low temperature properties.) |
NF A49-201-1-2002 |
焊接压力钢管.交货技术条件.第1部分:规定室温特性的非合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
NF A49-201-2-2002 |
焊接压力钢管.交货技术条件.第2部分:规定高温特性的电焊合金和非合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
NF A49-201-3-2002 |
焊接压力钢管.交货技术条件.第3部分:合金细晶粒结构钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
NF A49-201-4-2002 |
焊接压力钢管.交货技术条件.第4部分:规定低温特性的电焊非合钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temperature properties.) |
NF A49-201-5-2002 |
焊接压力钢管.交货技术条件.第5部分:规定高温特性的埋弧焊接非合金和合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
NF A49-201-6-2002 |
焊接压力钢管.交货技术条件.第6部分:规定低温特性的埋弧焊接非合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.) |
NF A49-214-1978 |
钢管.耐高温奥氏体无缝钢管.(带标准公差的尺寸.交货技术条件) |
(STEEL TUBES.SEAMLESS AUSTENITIC STEEL TUBES FOR USE AT HIGH TEMPERATURES.DIMENSIONS (WITH NORMAL TOLERANCES).TECHNICAL CONDITIONS OF DELIVERY.) |
NF A49-217-1987 |
钢管.热交换器用无缝管.奥氏体不锈钢和铁素体钢.(尺寸.交货技术条件.) |
(Steel tubes. Seamless tubes for heat exchangers. Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions.) |
NF A49-218-1979 |
钢管.奥氏体不锈钢熔炉用无缝钢管.(带标准公差或缩减公差的尺寸.交货技术条件.) |
(STEEL PIPES. SEAMLESS PIPES FOR FURNACES. AUSTENITIC STAINLESS STEELS. DIMENSIONS (WITH NORMAL OR REDUCED TOLERANCES). TECHNICAL DELIVERY CONDITIONS.) |
NF A49-220-1990 |
钢管.高温用的无缝钢管.尺寸.交贷的技术条件 |
(STEEL TUBES. GROOVED SEAMLESS STEEL TUBES FOR USE AT HIGH TEMPERATURE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-244-1993 |
钢管.压力设备用焊接奥氏体不锈钢和奥氏铁素体轧制钢管的尺寸和技术交货条件 |
(STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.) |
NF A49-247-1981 |
钢管.热交换器用纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件 |
(Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
NF A49-249-1980 |
钢管.食品工业用光端纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件 |
(Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
NF A49-285-1982 |
钢管.有质量要求的非合金或合金钢制对缝焊接椭圆底座.尺寸.交货技术条件 |
(Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.) |
NF A49-289-1990 |
钢管.用于高低温条件下的对缝焊接管状配件.非合金、合金和不锈钢.尺寸.技术交货条件 |
(Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.) |
NF A49-296-1983 |
钢管.带质量要求的熔焊非合金或合金钢制等径或缩径焊接三通管.尺寸.交货技术条件 |
(Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.) |
NF A49-300-1-2003 |
精密装置用钢管.交货技术条件.第1部分:无缝冷拉管 |
(Steel tubes for precision applications - Technical delivery conditions - Part 1 : seamless cold drawn tubes.) |
NF A49-300-2-2003 |
精密装置用钢管.交货技术条件.第2部分:焊接冷拉管 |
(Steel tubes for precision applications - Technical delivery conditions - Part 2 : welded cold drawn tubes.) |
NF A49-300-3-2003 |
精密装置用钢管.技术交货条件.第3部分:焊接冷分级管 |
(Steel tubes for precision applications - Technical delivery conditions - Part 3 : welded cold sized tubes.) |
NF A49-300-4-2003 |
精密装置用钢管.交货技术条件.第4部分:液压和气压动力系统用无缝冷拉管 |
(Steel tubes for precision applications - Technical delivery conditions - Part 4 : seamless cold drawn tubes for hydraulic and pneumatic power systems.) |
NF A49-300-5-2003 |
精密用途钢管.技术交货条件.第5部分:焊接冷精加工方形和矩形钢管 |
(Steel tubes for precision applications - Technical delivery conditions - Part 5 : welded and cold sized square and rectangular tubes.) |
NF A49-311-1974 |
钢管.机械用无缝管.尺寸.交货技术条件 |
(Steel tubes. Seamless tubes for mechanical application. Dimensions. Technical delivery conditions.) |
NF A49-313-1-2003 |
机械工程与综合工程学用无缝环形钢管.交货技术条件.第1部分:非合金和合金钢管 |
(Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1 : non-alloy and alloy steel tubes.) |
NF A49-317-1980 |
钢管.机械用光端无缝钢管.奥式体不锈钢.(尺寸.交货技术条件.) |
(STEEL TUBES. SEAMLESS PLAIN END TUBES FOR ENGINEERING USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-330-1985 |
钢管.液压和气压传动系统用无缝冷拉钢管.尺寸.交货技术条件 |
(Steel tubes. Seamless cold-drawn tubes for hydraulic and pneumatic power systems. Dimensions. Technical delivery conditions.) |
NF A49-341-1975 |
钢管.机械用精密焊接钢管.(尺寸.交货技术条件.) |
(STEEL TUBES-PRECISION WELDED TUBES FOR MECHANICAL APPLICATION-DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-343-1980 |
钢管.机械用D小于或等于168.3mm的纵向焊接钢管.(尺寸.交货技术条件.) |
(STEEL TUBES. LONGITUDINALLY WELDED D INFERIOR OR EQUAL TO 168,3 MM FOR ENGINEERING USE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-404-1-1998 |
易燃液体输送管线用钢管.技术交货条件.第1部分:要求等级A的钢管(欧洲标准EN 10208-1) |
(Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Part 1 : pipes of requirement class A.) |
NF A49-404-2-1996 |
易燃液体输送管线用钢管.交货技术条件.第2部分:B类要求的钢管 |
(Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Part 2 : pipes of requirement class B.) |
NF A49-500-2001 |
管和联接脚手架用活动钢管.交货技术条件 |
(Loose steel tubes for tube and coupler scaffold - Technical delivery conditions.) |
NF A49-502-1-1994 |
非合金和细精粒结构钢的热成型结构空心型材.第1部分:交货技术要求 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 1 : technical delivery requirements.) |
NF A49-502-2-1997 |
非合金和细晶粒结构钢的热成型结构空心截面.第2部分:公差、尺寸和截面特性 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 2 : tolerances, dimensions and sectional properties.) |
NF A49-540-1-1997 |
非合金细晶粒结构钢的冷成形焊接结构空心型材.第1部分:交货技术要求 |
(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.) |
NF A49-540-2-1997 |
非合金细晶粒结构钢的冷成形结构空心型材.第2部分:公差.尺寸和分段性能 |
(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 2 : tolerances, dimensions and sectional properties.) |
NF A49-580-1988 |
钢管脚手架和支承架用联结件、中心螺栓和踏板.要求和测试程序 |
(Cooplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes. Requirements and test procedures.) |
NF A49-647-1979 |
钢管.不锈钢、铁素体和奥氏体钢制圆形、正方形、矩形或椭圆形建筑用焊接钢管.(尺寸.交货技术条件.) |
(STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.) |
NF A49-702-1980 |
钢管.热涂沥青粘合剂地基的内外涂层 |
(STEEL TUBES. EXTERNAL AND INTERNAL HOT-DIP COATINGS BASED ON HYDROCARBON-BEARING BONDING AGENTS.) |
NF A49-703-1988 |
钢管.带状塑料外复层.卷绕 |
(STEEL TUBE. EXTERNAL COATING PLASTIC BASED IN BANDS. APPLICATION BY WINDING UP.) |
NF A49-704-2002 |
岸上和海上管线用钢管和配件.外面双层聚氯乙烯挤压涂料 |
(Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings.) |
NF A49-705-1982 |
钢管.聚乙烯外涂层.粉末烧结应用 |
(STEEL TUBES. EXTERNAL POLYETHYLENE COATING. APPLICATION BY POWDER SINTERING.) |
NF A49-706-1988 |
钢管.环氧树脂外涂层.应用.检验和试验 |
(STEEL TUBES. EPOXY RESIN POWDER EXTERNAL COATING. APPLICATION. INSPECTION AND TEST.) |
NF A49-707-1992 |
钢管.环氧树脂粉末内表面涂敷层.涂敷.检查和试验 |
(STEEL TUBES. EPOXY RESIN POWDER INTERNAL COATING. APPLICATION. INSPECTION AND TESTING.) |
NF A49-708-1-2002 |
近岸和海上管线用钢管和配件.环氧树脂及环氧树脂改良外涂层 |
(Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings.) |
NF A49-708-2-2002 |
近岸和海上管线用钢管和配件.聚亚氨酯及聚亚氨酯改良外涂层 |
(Steel tubes and fittings for on and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings.) |
NF A49-710-1988 |
钢管.聚乙烯3层外覆层.挤压的应用 |
(STEEL TUBES. EXTERNAL COATING WITH THREE POLYETHYLENE BASED COATING. APPLICATION THROUGH EXTRUSION.) |
NF A49-711-1992 |
钢管.带三层聚丙烯涂层的外包履层.用挤压法涂施 |
(STEEL TUBES. EXTERNAL COATING WITH THREE POLYPROPYLENE LAYERS COATING. APPLICATION BY EXTRUSION.) |
NF A49-712-1993 |
钢管.带二层环氧树脂聚丙烯涂层的外包履层.用挤压法涂施 |
(STEEL TUBES. EXTERNAL COATING WITH TWO RESIN EPOXY-POLYPROPYLENE LAYER COATING. APPLICATION BY EXTRUSION.) |
NF A49-713-1993 |
钢管.带有环氧树脂及聚酰胺基涂层的外部和/或内部双层覆层 |
(STEEL TUBES. EXTERNAL AND/OR INTERNAL TWO LAYERS COATING WITH EPOXY RESIN AND POLYAMIDE BASED COATING.) |
NF A49-714-1997 |
钢管.带有酚醛树脂或环氧树脂及聚酰胺基涂层的内部双层覆层 |
(STEEL TUBES. INTERNAL TWO LAYERS COATING WITH PHENOL RESIN OR EPOXY RESIN AND POLYAMIDE BASED COATING.) |
NF A49-716-1998 |
钢管.焊接接头镀膜配件和管的外结构. |
(STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING FOR WELDED JOINT.) |
NF A49-719-1998 |
钢管用内部和/或外部防护涂层.用于自动装置的热浸镀锌涂层规范 |
(INTERNAL AND/OR EXTERNAL PROTECTIVE COATINGS FOR STEEL TUBES. SPECIFICATION FOR HOT DIP GALVANIZED COATINGS APPLIED IN AUTOMATIC PLANTS. (EUROPEAN STANDARD EN 10240).) |
NF A49-750-1994 |
地下热水预绝缘耦合管道系统.钢制给水管,聚亚胺脂热绝缘和聚乙烯外套的管道装置 |
(Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
NF A49-751-1994 |
地下热水管网的预隔热粘结管道系统.钢制供水管配件、聚氨基甲酸乙酯热绝缘材料以及高密度聚乙烯外壳 |
(Preinsulated bonded pipe systems for underground hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
NF A49-854-1988 |
钢管.扭转试验 |
(Steel tubes. Up setting test.) |
NF A49-865-1999 |
金属材料.重量损失磨损试验(欧洲标准EN 10274) |
(METALLIC MATERIALS. DROP WEIGHT TEAR TEST. (EUROPEAN STANDARD EN 10274).) |
NF A49-866-1999 |
金属材料.管圈液压试验 |
(METALLIC MATERIALS. TUBE RING HYDRAULIC PRESSURE TEST. (EUROPEAN STANDARD EN 10275).) |
NF A49-875-1-1996 |
钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 |
(Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.) |
NF A49-875-10-2000 |
钢管的无损检验.第10部分:检测缺陷用自动熔弧焊钢管焊缝的X射线照相试验 |
(Non-destructive testing of steel tubes - Part 10 : radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections.) |
NF A49-875-11-2000 |
钢管的无损检验.第11部分:检测表面缺陷用无缝和焊接钢管的液体渗透试验 |
(Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections.) |
NF A49-875-12-2000 |
钢管的无损检验.第12部分:检测表面缺陷用无缝和焊接锰钢管的磁粉检测 |
(Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.) |
NF A49-875-13-2000 |
钢管的无损检验.第13部分:无缝和焊接(埋弧焊)钢管的自动全周边超声厚度检测 |
(Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged ar welded) steel tubes.) |
NF A49-875-14-2000 |
钢管的无损检验.第14部分:层面缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动超声试验 |
(Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections.) |
NF A49-875-15-2000 |
钢管的无损检验.第15部分:层面缺陷探测用焊接钢管的生产用焊接带材/板材自动超声试验 |
(Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.) |
NF A49-875-16-2000 |
钢管的无损检验.第16部分:层面缺陷探测用焊接钢管的焊缝邻近区域的自动超声试验 |
(Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections.) |
NF A49-875-17-2000 |
钢管的无损检验.第17部分:层面缺陷探测用无缝和焊接钢管末端超声试验 |
(Non-destructive testing of steel tubes - Part 17 : ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.) |
NF A49-875-18-2000 |
钢管的无损检验.第18部分:层面缺陷探测用无缝和焊接锰钢管末端磁粉检验 |
(Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.) |
NF A49-875-2-2000 |
钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验 |
(Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of) |
NF A49-875-3-2000 |
钢管的无损检验.第3部分:检测缺陷用无缝和焊接钢管(埋弧焊除外)的自动涡流试验 |
(Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.) |
NF A49-875-4-2000 |
钢管的无损检验.第4部分:检测横向缺陷用无缝铁磁钢管的自动全周边电磁变换器/磁漏试验 |
(Non-destructive testing of steel tubes - Part 4 : automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections) |
NF A49-875-5-2000 |
钢管的无损检验.第5部分:检测纵向缺陷用无缝和焊接(除埋弧焊)锰钢管的自动全周边电磁变换器/磁漏试验 |
(Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for) |
NF A49-875-6-2000 |
钢管的无损检验.第6部分:检测横向缺陷用无缝钢管的自动全周边超声试验 |
(Non-destructive testing of steel tubes - Part 6 : Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections.) |
NF A49-875-7-1996 |
钢管的无损试验.第7部分:纵向缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动全周边超声波试验 |
(Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.) |
NF A49-875-8-2000 |
钢管的无损检验.第8部分:检测纵向缺陷用电焊钢管焊缝的自动超声试验 |
(Non-destructive testing of steel tubes - Part 8 : automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections.) |
NF A49-875-9-2000 |
钢管的无损检验.第9部分:检测纵向和/或横向缺陷用埋弧焊钢管焊缝的自动超声试验 |
(Non-destructive testing of steel tubes - Part 9 : automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections.) |
NF A49-876-2000 |
钢管的无损检验.1级和2级无损检验人员的资格和能力 |
(Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel.) |
NF A49-880-1983 |
钢管.热浸镀锌.管和管附件镀层的化学分析 |
(Steel tubes. Hot dip galvanization. Chemical analysis of the coating of tubes and tubular accessories.) |
NF A49-900-1992 |
压力容器.无缝钢气瓶.钢的类型.半成品 |
(PRESSURE VESSELS. SEAMLESS STEEL GAS VESSELS. TYPES OF STEELS. SEMI FINISHED PRODUCTS.) |
NF A49-901-2-2002 |
可运输的储气瓶.可重复填充、可运输的0.5升至(包括)150升的无缝钢储气瓶的设计和制造规范.第2部分:Rm值等于 |
() |
NF A49-903-2003 |
可运输的储气瓶.容量为1升及1升以下的可再充装的、可运输无缝正火碳锰钢储气瓶的设计和制造规范 |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders up to and including 1 litre.) |
NF A49-950-1996 |
不锈钢管.尺寸、公差和单位长度的规范质量 |
(Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length.) |
NF A50-001-1-1998 |
铝和铝合金.条款和定义.第1部分:一般条款 |
(Aluminium and aluminium alloys. Terms and definitions. Part 1 : general terms.) |
NF A50-001-3-2003 |
铝及铝合金.术语和定义.第3部分:废料 |
(Aluminium and aluminium alloys - Terms and definitions - Part 3 : scrap.) |
NF A50-100-1994 |
锻铝和铝合金.用于生产与食品接触的材料和物品的金属的化学成分 |
(Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-products used for the fabrication or articles for use in contact with food.) |
NF A50-110-1-2003 |
铝和铝合金.废料.第1部分:一般要求、取样和试验 |
(Aluminium and aluminium alloys - Scrap - Part 1 : general requirements, sampling and tests.) |
NF A50-110-10-2003 |
铝和铝合金.废料.第10部分:使用过的铝制饮料罐组成的废料 |
(Aluminium and aluminium alloys - Scrap - Part 10 : scrap consisting of used aluminium beverage cans.) |
NF A50-110-11-2003 |
铝和铝合金.废料.第11部分:铝铜散热器废料 |
(Aluminium and aluminium alloys - Scrap - Part 11 : scrap consisting of aluminium-copper radiators.) |
NF A50-110-12-2003 |
铝和铝合金.废料.第12部分:一种合金组成的车床切屑 |
(Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.) |
NF A50-110-13-2003 |
铝和铝合金.废料.第13部分:两种或多种合金组成的混合切屑 |
(Aluminium and aluminium alloys - Scrap - Part 13 : mixed turnings consisting of two or more alloys.) |
NF A50-110-14-2003 |
铝和铝合金.废料.第14部分:旧的铝制包装件组成的废料 |
(Aluminium and aluminium alloys - Scrap - Part 14 : scrap from post-consumer aluminium packagings.) |
NF A50-110-15-2003 |
铝和铝合金.废料.第15部分:去除涂层的旧铝包装件废料 |
(Aluminium and aluminium alloys - Scrap - Part 15 : decoated aluminium scrap from post-consumer aluminium packagings.) |
NF A50-110-2-2003 |
铝和铝合金.废料.第2部分:非合金铝废料 |
(Aluminium and aluminium alloys - Scrap - Part 2 : unalloyed aluminium scrap.) |
NF A50-110-3-2003 |
铝和铝合金.废料.第3部分:导线和电缆废料 |
(Aluminium and aluminium alloys - Scrap - Part 3 : wire and cable scrap.) |
NF A50-110-4-2003 |
铝和铝合金.废料.第4部分:由一种可锻合金组成的废料 |
(Aluminium and aluminium alloys - Scrap - Part 4 : scrap consisting of one single wrought alloy.) |
NF A50-110-5-2003 |
铝和铝合金.废料.第5部分:同系列两种或多种可锻合金组成的废料 |
(Aluminium and aluminium alloys - Scrap - Part 5 : scrap consisting of two or more wrought alloys of the same series.) |
NF A50-110-6-2003 |
铝和铝合金.废料.第6部分:两种或多种可锻合金组成的废料 |
(Aluminium and aluminium alloys - Scrap - Part 6 : scrap consisting of two or more wrought alloys.) |
NF A50-110-7-2003 |
铝和铝合金.废料.第7部分:铸件组成的废料 |
(Aluminium and aluminium alloys - Scrap - Part 7 : scrap consisting of castings.) |
NF A50-110-8-2003 |
铝和铝合金.废料.第8部分:铝分离工艺中切碎工艺产生的有色金属材料组成的废料 |
(Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes.) |
NF A50-110-9-2003 |
铝和铝合金.废料.第9部分:有色金属碎料的铝分离工艺产生的废料 |
(Aluminium and aluminium alloys - Scrap - Part 9 : scrap from aluminium separation processes of non-ferrous shredded materials.) |
NF A50-120-2000 |
铝和铝合金.锻造产品.生产压力器件的产品的特殊要求 |
(Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment.) |
NF A50-125-2003 |
铝及铝合金.电工用铝薄板材、带材和板材 |
(Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications.) |
NF A50-150-1-2002 |
铝和铝合金.船用锻造和铸造产品:第1部分:规范 |
(Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1 : specifications.) |
NF A50-181-1970 |
铝和铝合金.薄带和箔金属薄片.机械试验.拉力、冲压、崩裂 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. MECHANICAL TESTS.) |
NF A50-261-1977 |
铝和铝合金.薄带钢和金属薄片.物理试验、铝带多孔性、可湿性、厚度.铝带附着力 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PHYSICAL TESTS.) |
NF A50-400-1994 |
铝和铝合金.半连续铸造轧制铸锭 |
(ALUMINIUM AND ALUMINIUM ALLOYS. ROLLING INGOTS. SPECIFICATIONS. (EUROPEAN STANDARD EN 487).) |
NF A50-421-1994 |
锻铝和铝合金钢材,带材和板材.第2部分:机械性能 |
(Aluminium and aluminium alloys. Sheet, strip and plate. Part 2 : mechanical properties.) |
NF A50-422-2003 |
铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差 |
(Aluminium and aluminium alloys - Sheet, strip and plate - Part 3 : tolerances on dimensions and form for hot-rolled products.) |
NF A50-425-1998 |
轻金属及其合金.危险产品传输箱构造可焊接产品 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR THE CONSTRUCTION OF TANKS FOR THE TRANSPORTATION OF DANGEROUS GOODS.) |
NF A50-430-1995 |
铝和铝合金.一般用途的圆制品和圆坯的规格 |
(Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications.) |