标准号 |
中文名称 |
英文名称 |
NF E58-050-1995 |
土方机械.安全.第1部分:总要求 |
(Earth-moving machinery. Safety. Part 1 : general requirements.) |
NF E58-050/A1-1998 |
修改件1 |
() |
NF E58-0501-1998 |
1995年NF E 58-050的补充件1 |
() |
NF E58-052-1998 |
土方机械.进出检查系统 |
(Earth-moving machinery. Access systems.) |
NF E58-053-2000 |
土方机械.翻车保护结构.实验室试验和性能要求 |
(Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements.) |
NF E58-054-2000 |
土方机械.物体降落保护结构.实验室试验和性能要求 |
(Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements.) |
NF E58-055-1996 |
土方机械.轮式机械.制动系统的性能要求和试验程序 |
(EARTH-MOVING MACHINERY. BRAKING SYSTEMS OF RUBBER-TYRED MACHINES. SYSTEMS AND PERFORMANCE REQUIREMENTS AND TEST PROCEDURES. (EUROPEAN STANDARD EN ISO 3450).) |
NF E58-056-1995 |
土方机械.挡板和护罩.定义和规范(欧洲标准EN ISO 3457) |
(Earth-moving machinery. Guards and shields. Definitions and specifications.) |
NF E58-059-1987 |
土方机械.操作仪表 |
(Earth-moving machinery. Operating instrumentation.) |
NF E58-061-1978 |
土方机械.测定重心 |
(EARTHMOVING MACHINERY. DETERMINATION OF THE CENTER OF GRAVITY.) |
NF E58-062-1998 |
土方机械.拖拉机和农林机械.座位标记点 |
(Earth-moving machinery, and tractors and machinery for agriculture and forestry. Seat index point.) |
NF E58-068-1999 |
土方机械.座椅安全带和座椅安全带固定件 |
(Earth-moving machinery. Seat belts and seat belt anchorages.) |
NF E58-069-1987 |
土方机械.维护和保管 |
(Earth-moving machinery. Preservation and storage.) |
NF E58-070-1998 |
土方机械.铲斗容量分配 |
(Earth-moving machinery. Volumetric ratings for backhoe buckets.) |
NF E58-072-1987 |
土方机械.行驶速度的测定 |
(Earth-moving machinery. Determination of ground speed.) |
NF E58-073-1995 |
土方机械.液压挖掘机.机械过加载的测量方法 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. METHODS OF MEASURING TOOL FORCES.) |
NF E58-074-2000 |
土方机械.操作员座位振动的实验室评价 |
(Earth-moving machinery - Laboratory evaluation of operator seat vibration.) |
NF E58-076-1998 |
土方机械.整机、设备和零件的质量测量方法 |
(Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components.) |
NF E58-077-1989 |
土方机械.液压挖土机.反铲测定体积评价 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS AND BACKHOE LOADERS. VOLUMETRIC RATING FOR HOE BUCKET. COMPLETE METHOD.) |
NF E58-078-1984 |
土方机械.铲斗和前身装载的铲斗.装载体积的评定 |
(EARTH-MOVING MACHINERY. LOADER AND FRONT LOADING EXCAVATOR BUCKETS. VOLUMETRIC RATINGS.) |
NF E58-079-1984 |
土方机械.测定辕杆牵引力的试验方法 |
(EARTH-MOVING MACHINERY. METHOD OF TEST FOR THE MEASUREMENT OF DRAWBAR PULL.) |
NF E58-080-1-2002 |
土方机械.装载机和挖掘装载机.第1部分:验证计算倾翻载荷用的标定工作量计算方法和试验方法 |
(Earth-moving machinery - Loaders and backhoe loaders - Part 1 : calculation of rated operating capacity and test method for verifying calculated tipping load.) |
NF E58-080-2-2002 |
土方机械.装载机和挖掘装载机.第2部分:测量最大提升高度的转动力和提升能力的试验方法 |
(Earth-moving machinery - Loaders and backhoe loaders - Part 2 : test method for measuring breakout forces and lift capacity to maximum lift height.) |
NF E58-081-1999 |
土方机械.电磁兼容性 |
(Earth-moving machinery. Electromagnetic compatibility.) |
NF E58-082-1998 |
土方机械.轮机翻挖尺寸的测定 |
(Earth-moving machinery. Determination of turning dimensions of wheeled machines.) |
NF E58-090-1998 |
土方机械.拖拉机式推土机、平地机、铲运机刃口.主要形状和基本尺寸 |
(Earth-moving machinery. Cutting edges used on tractor-dozers, graders and scrapers. Principal shapes and basic dimensions.) |
NF E58-100-1996 |
土方机械.安全.第5部分:液压开凿机要求(欧洲标准EN 474-5) |
(Earth-moving machinery. Safety. Part 5 : requirements for hydraulic excavators.) |
NF E58-102-1996 |
土方机械.安全性.第4部分:挖掘装载机的要求 |
(Earth-moving machinery. Safety. Part 4 : requirements for backhoe loaders.) |
NF E58-104-1996 |
土方机械.安全性.第3部分:装料机的要求 |
(Earth-moving machinery. Safety. Part 3 : requirements for loaders.) |
NF E58-105-1995 |
移动式筑路机械.安全.第2部分:路面碾磨机的特殊要求 |
(Mobile road construction machinery. Safety. Part 2 : specific requirements for road-milling machines.) |
NF E58-106-1995 |
移动式筑路机械.安全.第3部分:土壤稳定机械的特殊要求 |
(Mobile road construction machinery. Safety. Part 3 : specific requirements for soil stabilization machines.) |
NF E58-107-1995 |
移动式筑路机械.安全.第4部分:压缩机械的特殊要求 |
(Mobile road construction machinery. Safety. Part 4 : specific requirements for compaction machines.) |
NF E58-110-1999 |
道路建筑车辆.沥青混合成套设备.安全要求.(EN 536) |
(ROAD CONSTRUCTION MACHINES. ASPHALT MIXING PLANTS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 536).) |
NF E58-111-1998 |
土方机械.灯光.信号和标志灯和反光装置 |
(EARTH-MOVING MACHINERY. LIGHTING, SIGNALLING AND MARKING LIGHTS, AND REFLEX-REFLECTOR DEVICES.) |
NF E58-112-1996 |
土方机械.操作者控制装置 |
(Earth-moving machinery. Operator`S controls.) |
NF E58-113-1993 |
土方机械.操作员的视野.第1部分:试验方法 |
(EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 1 : TEST METHOD.) |
NF E58-113-2-1995 |
土方机械.操作员的视野.第2部分:评定方法 |
(EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 2 : EVALUATION METHOD.) |
NF E58-113-3-1995 |
土方机械.操作员的视野.第3部分:判据 |
(EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 3 : CRITERIA.) |
NF E58-114-1997 |
土方机械.橡胶轮胎机械.转向要求 |
(Earth-moving machinery. Rubber-tyred machines. Steering requirements.) |
NF E58-116-1993 |
土方机械.钥匙锁闭起动装置 |
(EARTH-MOVING MACHINERY. KEY-LOCKED STARTING SYSTEMS.) |
NF E58-117-1995 |
土方机械.活节框架锁.性能要求 |
(EARTH-MOVING MACHINERY. ARTICULATED FRAME LOCK. PERFORMANCE REQUIREMENTS.) |
NF E58-119-1996 |
土方机械.安全性.第2部分:平整机的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 2 : REQUIREMENTS FOR TRACTOR-DOZERS. (EUROPEAN STANDARD EN 474-2).) |
NF E58-120-1996 |
土方机械.安全.第6部分:自动倾卸车的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 6 : REQUIREMENTS FOR DUMPERS. (EUROPEAN STANDARD EN 474-6).) |
NF E58-122-1995 |
土方机械.装有侧起重臂的铺管机.轮式拖拉机和装卸机的提升能力 |
(EARTH-MOVING MACHINERY. LIFT CAPACITY OF PIPELAYERS AND WHEELED TRACTORS OR LOADERS EQUIPPED WITH SIDE BOOM.) |
NF E58-123-1998 |
土方机械.安全性.第7部分:铲运机的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 7 : REQUIREMENTS FOR SCRAPERS. (EUROPEAN STANDARD EN 474-7).) |
NF E58-124-1998 |
土方机械.安全性.第8部分:推土机的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART : REQUIREMENTS FOR GRADERS. (EUROPEAN STADARD EN 474-8).) |
NF E58-125-1998 |
土方机械.安全性.第9部分:管道铺设机的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 9 : REQUIREMENTS FOR PIPELAYERS. (EUROPEAN STANDARD EN 474-9).) |
NF E58-126-1998 |
土方机械.安全性.第10部分:挖沟机的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 10 : REQUIREMENTS FOR TRENCHERS. (EUROPEAN STANDARD EN 474-10).) |
NF E58-127-1998 |
土方机械.安全性.第10部分:土方压实机的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 11 : REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS. (EUROPEAN STANDARD EN 474-11).) |
NF E58-130-1995 |
土方机械.机械.安装在机器上的前后可听到的报警信号.声音试验方法 |
(EARTH-MOVING MACHINERY. MACHINERY. MACHINE-MOUNTED FORWARD AND REVERSE AUDIBLE WARINING ALARM. SOUND TEST METHOD.) |
NF E58-140-1995 |
土方机械.机器内流体装置工作倾斜度极限的测定.静态试验 |
(EARTH-MOVING MACHINERY. DETERMINATION OF SLOPE LIMITS FOR MACHINE FLUID SYSTEMS OPERATION. STATIC TEST METHOD.) |
NF E58-150-2002 |
地面移动机械.产品识别编码系统 |
(Earth-moving machinery - Product identification numbering system.) |
NF E58-151-1997 |
土方机械.液压挖掘机和反铲装载机悬臂降低控制装置.要求和试验 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATOR AND BACKHOE LOADER BOOM LOWERING CONTROL DEVICE. REQUIREMENTS AND TESTS.) |
NF E58-152-1995 |
土方机械.吊臂承重装置 |
(EARTH-MOVING MACHINERY. LIFT-ARM SUPPORT DEVICES.) |
NF E58-153-1995 |
土方机械.液压挖掘机.提升能力 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. LIFT CAPACITY.) |
NF E58-155-1995 |
土方机械.翻斗车身支架和操作舱翻转支架装置 |
(EARTH-MOVING MACHINERY. DUMPER BODY SUPPORT AND OPERATOR`S CAB TILT SUPPORT DEVICES.) |
NF E58-165-2000 |
机械结构.内部供电动力的机器的电磁兼容性 |
(Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply.) |
NF E58-170-2001 |
道路表面清洁机.安全要求 |
(Machines for road surface cleaning - Safety requirements.) |
NF E58-172-2003 |
冬季服务机械.安全要求 |
(Winter service machines - Safety requirements.) |
NF E58-173-2003 |
公路维护设备.安全要求 |
(Highway maintenance machines - Safety requirements.) |
NF E58-200-1996 |
打桩设备.安全要求 |
(PILING EQUIPMENT. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 996).) |
NF E58-200/A1-1999 |
修改件1 |
() |
NF E58-200/A2-2003 |
打桩设备.安全要求 |
(Piling equipment - Safety requirements.) |
NF E58-2001-1999 |
1996年NF E 58-200的补充件1 |
() |
NF E58-250-1996 |
钻机.安全 |
(Drill rigs. Safety.) |
NF E58-302-2003 |
隧道机械.巷道掘进机、联合采矿机和冲击式挑顶机.安全要求 |
(Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements.) |
NF E58-303-1996 |
岩石用无护平巷掘进机和无杆轴掘进机的安全 |
(Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock.) |
NF E58-304-2003 |
隧道机械.气闸.安全要求 |
(Tunnelling machines - Air locks - Safety requirements.) |
NF E58-610-2000 |
由混凝土和钙硅而来的构架产品生产的机器.安全.第1部分:共同要求 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1 : common requirements.) |
NF E58-620-2003 |
混凝土和硅酸钙类建筑产品用生产机器.安全.第2部分:制块机 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2 : block making machines.) |
NF E58-630-2003 |
混凝土和硅酸钙类建筑产品用生产机器.安全.第3部分:滑动和转盘机 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3 : slide and turntable machines.) |
NF E58-640-2001 |
生产混凝土和硅酸盐建筑产品用机器.安全.第4部分:屋面砖制造设备 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4 : rooftile making machines.) |
NF E58-680-2003 |
混凝土和硅酸钙类建筑产品用生产机器.安全.第8部分:硅酸盐(和混凝土)建筑产品用生产机器和设备 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8 : machines and equipment for the manufacture of constructional products from calcium-silica) |
NF E58-910-3-2003 |
平板玻璃制造、处理和加工用机械和设备.安全要求.第3部分:切割机 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3 : cutting machines.) |
NF E58-910-4-2003 |
平板玻璃制造、处理和加工用机械和设备.安全要求.第4部分:倾斜台 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4 : tilting tables.) |
NF E60-000-1975 |
机床型号的多种语言词汇 |
(MULTILINGUAL VOCABULARY OF MACHINE TOOL TYPES.) |
NF E60-001-1982 |
磨床.外旋转表面.综合0.多种语言名细表.应用 |
(External cylindrical grinding machines. General. Terminology. Utilisation.) |
NF E60-002-1982 |
磨床.水平轴线砂轮轴平面.综述.多种语言名称.应用 |
(Surface grinding machines with horizontal grinding wheel spindle. General. Terminology. Utilisation.) |
NF E60-003-1982 |
磨床.无中心外旋转表面.综述.多种语言名名称.应用 |
(Cylindrical external centreless grinding machines. General. Terminology. Utilisation.) |
NF E60-009-1976 |
机床的定义 |
(DEFINITION OF A MACHINE TOOL.) |
NF E60-010-1970 |
机床的分类.综合 |
(CLASSIFICATION OF MACHINE TOOLS.GENERAL) |
NF E60-011-1970 |
机床的分类.金属切削机床 |
(CLASSIFICATION OF MACHINE TOOLS.MACHINE TOOLS,CHIP REMOVING.) |
NF E60-012-1970 |
机床的分类.成形机剪床 |
(CLASSIFICATION OF MACHINE TOOLS.FORMING MACHINES,SHEARING MACHINES.) |
NF E60-013-1984 |
机床的分类.木工机床 |
(Classification of machine-tools. Woodworking machines.) |
NF E60-021-1997 |
机床切削工具.速度和走刀量 |
(Machine-tools. speeds and feeds.) |
NF E60-022-1971 |
车床丝杠的螺矩(数控车床除外) |
(PITCHES OF SCREW LEAD OF LATHES (OTHER THAT NUMERICAL CONTROLLED LATHES).) |
NF E60-023-1996 |
人工换刀7:24锥度工具锥柄 |
(7/24 tapers for tool skanks for manual changing.) |
NF E60-025-1978 |
机床主轴前部.锥度5%和7/24的莫氏锥公差 |
(MACHINE TOOL SPINDLE NOSES. TAPER TOLERANCES FOR MORSE TAPER,5 PERCENT TAPERS AND 7/24 TAPERS.) |
NF E60-028-1972 |
机床部件移动指示标尺 |
(SCALES FOR INDICATION OF DISPLACEMENT OF MACHINE TOOL COMPONENTS) |
NF E60-031-1966 |
机床控制机构的操作方向 |
(Direction of operation of machine tool controls.) |
NF E60-032-1966 |
机床上示出的标志符号 |
(Symbols for indications appearing on machine tools.) |
NF E60-051-1983 |
机床技术说明书.中心孔.型号A.B和R.尺寸 |
(Centre holes. Types A,B and R. Dimensions.) |
NF E60-096-1998 |
机械工具试验规程.第4部分:数字型控制机械工具循环试验 |
(TEST CODE FOR MACHINE-TOOLS. PART 4 : CIRCULAR TESTS FOR NUMERICALLY CONTROLLED MACHINE TOOLS.) |
NF E60-097-1998 |
实验规则和机械工具.第2部分:数控轴位置的精度和重复性的测定 |
(Test code for machine tools. Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes.) |
NF E60-100-1998 |
机床的试验规程.非负载或精加工条件下机械加工的几何精度 |
(Test code for machine tools. Part 1 : geometric accuracy of machines operating under no-load or finishing conditions.) |
NF E60-101-1997 |
通用平行车床的合格条件.精度测试 |
(Acceptance conditions for general purpose parallel lathes. Testing of the accuracy.) |
NF E60-102-1976 |
数控卧式车床的试验条件.精确度检验 |
(TEST CONDITIONS FOR NUMERICAL CONTROL PARALLEL LATHES. TESTING OF THE ACCURACY.) |
NF E60-103-1998 |
机床.卧式轴六角自动车床和卧式单轴自动车床的试验条件.精度试验 |
(Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy.) |
NF E60-105-1984 |
单柱或双柱立式车床.验收条件和名称.第1部分:概述 |
(Acceptance conditions for vertical turning and boring lathes with one or two columns. Part 1 : general introduction.) |
NF E60-106-1984 |
单柱或双柱立式车床.验收条件和名称.第2部分:固定或可移动卡盘车床.精确度检验 |
(Acceptance conditions and nomenclature for vertical turning and boring lathes with one or two columns. Part 2 : lathes with a single fixed or movable table. Testing of accuracy.) |
NF E60-107-1985 |
机床.仿形车床和仿形辅助装置.验收条件.精确度检验 |
(Machine-tools. Copying lathes and copying attachments. Acceptance conditions. Testing of accuracy.) |
NF E60-111-0-1999 |
升降工作台的铣床的试验条件.第0部分:概述 |
(Test conditions for milling machines with table of variable height. Testing of accuracy. Part 0 : general introduction.) |
NF E60-111-2-1998 |
带升降工作台的铣床的试验条件.精度试验.第2部分:卧式机床 |
(Test conditions for milling machines with table of variable height. Testing of the accuracy. Part 2 : machines with horizontal spindle.) |
NF E60-111-3-1998 |
可变高度平台机器的试验条件.精度实验.第3部分:带垂直镗杆的机器 |
(Test condition for milling machines with table of variable height. Testing of accuracy. Part 3 : machines with vertical spindle.) |
NF E60-112-1-2001 |
工作台高度固定的手控铣床的试验条件.精度试验.第1部分:带有水平主轴的机器 |
(Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy -- Part 1 : machines with horizontal spindle.) |
NF E60-112-2-2001 |
工作台高度固定的手控铣床的试验条件.精度试验.第2部分:带有垂直主轴的机器 |
(Test conditions for manually controlled milling machines with table of fixed height -Testing of the accuracy - Part 2 : machines with vertical spindle.) |
NF E60-114-1985 |
镗床和铣床的可移动盘.验收条件.精确度检验 |
(Machine tools. Removable tables of boring and milling machines. Acceptance conditions. Testing of accuracy.) |
NF E60-116-1999 |
卧式镗铣床的试验条件.准确度试验.第2部分:台式机床 |
(Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 2 : table-type machines.) |
NF E60-118-1998 |
带横主轴的镗床和铣床的验收条件.第3部分:精确度试验.具有固定工作台的水平机器 |
(Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 3 : floor type machines with detached, stationary work-holding table.) |
NF E60-119-1998 |
卧式镗铣床的验收条件.精度试验.第4部分:可移动床身的多刀刨床 |
(Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 4 : planer type machines with movable column.) |
NF E60-120-1981 |
机床工件夹具的验收条件和安装条件 |
(Test conditions and installation conditions for work-holding fixed tables of machine tools.) |
NF E60-121-2002 |
有水平磨砂轮轴和往复式工作台的平面磨床的试验条件.精度试验.第1部分:工作台长度最长达1600mm的机床 |
(Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of accuracy - Part 1 : machines with a table length up to 1 600 mm.) |
NF E60-123-1984 |
横轴内旋转圆磨床.验收条件.精确度检验 |
(ACCEPTANCE CONDITIONS FOR INTERNAL CYLINDRICAL GRINDING MACHINES WITH HORIZONTAL SPINDLE. TESTING OF ACCURACY.) |
NF E60-124-1984 |
带移动台外旋转圆磨床.验收条件.精确度检验 |
(TEST CONDITIONS FOR EXTERNAL CYLINDRICAL GRINDING MACHINES WITH A MOVABLE TABLE. TESTING OF ACCURACY.) |
NF E60-126-2001 |
双柱式平面磨床的试验条件.导轨磨床.精度试验 |
(Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy.) |
NF E60-127-1989 |
立式磨床.验收条件.精确度检验 |
(Machine tools. Vertical grinding machines. Acceptance conditions. Testing of accuracy.) |
NF E60-132-1-1997 |
立柱型垂直钻床的试验条件.精度测试.第1部分:几何试验 |
(Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests.) |
NF E60-132-2-1997 |
立柱型垂直钻床的试验条件.精度测试.第2部分:实用试验 |
(Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 2 : practical test.) |
NF E60-133-1-1996 |
箱型立式钻床的试验条件.精度试验.第1部分:几何试验 |
(Test conditions for box type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests.) |
NF E60-133-2-1996 |
箱型立式钻床的试验条件.精度试验.第2部分:实用试验 |
(Test conditions for box type vertical drilling machines. Testing of the accuracy. Part 2 : pratical test.) |