标准号 |
中文名称 |
英文名称 |
NF P16-321-5-1994 |
排水及污水用陶土管道,配件和管接头.第5部分:多孔陶土管道和配件的要求(EN 295-5) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.) |
NF P16-321-5/A1-1999 |
1994年的NF EN 295-5 标准的修改件1 |
() |
NF P16-321-51-1999 |
1994年NF P 16-321-5的补充件1 |
() |
NF P16-321-6-1996 |
排水及污水用陶土管道.配件和管接头.第6部分:陶土管道的出入水孔的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.) |
NF P16-321-7-1996 |
排水及污水用陶土管道.配件和管接头.第7部分:陶土管道和管道插孔用连接件的要求 |
(Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.) |
NF P16-325-1-1999 |
废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第1部分:要求,试验和质量控制(EN1123-1) |
(Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
NF P16-325-2-1999 |
废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第2部分:尺寸(EN1123-2) |
(Pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 2 : dimensions.) |
NF P16-326-1-1999 |
废水系统用带套管的纵向焊接不锈钢管的管和配件.第1部分:要求、试验和质量控制 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
NF P16-326-2-1999 |
废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统S.尺寸 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2 : systems S. Dimensions.) |
NF P16-326-3-1999 |
废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统X.尺寸 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3 : system X. Dimensions.) |
NF P16-330-1-1999 |
建筑物集水沟.第1部分:要求 |
(GULLIES FOR BUILDINGS. PART 1 : REQUIREMENTS. (EUROPEAN STANDARD EN 1253-1).) |
NF P16-330-1-2003 |
建筑物用集水沟.第1部分:要求 |
(Gullies for buildings - Part 1 : requirements.) |
NF P16-330-2-1998 |
建筑物集水沟.第2部分:试验方法(欧洲标准EN 1253-2) |
(GULLIES FOR BUILDINGS. PART 2 : TEST METHODS. (EUROPEAN STANDARD EN 1253-2).) |
NF P16-330-3-1999 |
建筑物集水沟.第3部分:质量控制 |
(Gullies for buildings. Part 3 : quality control.) |
NF P16-330-4-2000 |
建筑物集水沟.第4部分:入口盖 |
(Gullies for buildings - Part 4 : access covers.) |
NF P16-335-1-2002 |
建筑物防溢流设备.第1部分:要求 |
(Anti-flooding devices for buildings - Part 1 : requirements.) |
NF P16-335-2-2003 |
建筑物用防水淹装置.第2部分:试验方法 |
(Anti-flooding devices for buildings - Part 2 : test methods.) |
NF P16-340-2003 |
车辆和行人区的排水通道.分类、设计、试验要求、标记和合格评定 |
(Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity.) |
NF P16-341-1990 |
排水.无压力排水管路用钢筋混凝土和非钢筋混凝土制圆管.定义、规范、试验方法、标记、验收条件 |
(Drainage, sewerage. Precast concrete cylindrical pipes, steel reinforced or not reinforced for sewerage networks without pressure. Definitions, specifications, testing methods, marking, basis for acceptance.) |
NF P16-342-1990 |
排水.排水管道上的混凝土制观察孔用的在工厂加工构件.定义、规范、试验方法、标记、验收条件 |
(DRAINAGE,SEWERAGE. PRECAST CONCRETE ELEMENTS OF MANHOLES FOR SEWAERAGE NETWORKS. DEFINITIONS SPECIFICATIONS,TESTING METHODS,MARKING,BASIS FOR ACCEPTANCE.) |
NF P16-343-1990 |
排水.排水管的混凝土制接线盒用工厂加工的件.定义、规范、试验方法、标记、验收条件 |
(DRAINAGE,SEWERAGE. PRECAST CONCRETE ELEMENTS OF LAMPHOLES FOR SEWERAGE NETWORKS. DEFINITIONS,SPECIFICATIONS,TESTING METHODS,MARKING,BASIS FOR ACCEPTANCE.) |
NF P16-345-1-2003 |
非加筋、钢筋和加筋混凝土管道和配件 |
(Concrete pipes and fittings, unreinforced, steel fibre and reinforced.) |
NF P16-345-2-2003 |
非加筋、钢筋和加筋混凝土管道和配件.第2部分:国家规范 |
(Concrete pipes and fittings, unreinforced, steel fibre and reinforced - Part 2 : national specification.) |
NF P16-346-1-2003 |
非加筋、钢筋和加筋混凝土检查井和检查室 |
(Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced.) |
NF P16-346-2-2003 |
非加筋、钢筋和加筋混凝土检查井和检查室.第2部分:国家规范 |
(Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced - Part 2 : National specification.) |
NF P16-347-2003 |
地下试验室人入口处阶梯.要求、标记、试验和合格评定 |
(Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity.) |
NF P16-351-1998 |
塑料.民用机械用亚地表地下塑料管道系统.规范 |
(Plastics. Plastics piping system for civil engineering subsoil drainage. Specification.) |
NF P16-352-1-1998 |
非压力地下管道和废水用塑料管道系统.非塑化聚(乙烯,氯乙烯)(PVC-D).第1部分:管道规范,配件和系统 |
(Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Part 1 : specifications for pipes, fittings and the system.) |
NF P16-357-1-1997 |
无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范 |
(Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1 : specifications for pipes, fittings and the system.) |
NF P16-357-1/A1-2002 |
无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范 |
(Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
NF P16-358-1-2001 |
地下和地上排水和排污用塑料压力管道系统.未增塑聚氯乙烯(PVC-U).第1部分:管道件和系统规范 |
(Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for piping components and the system.) |
NF P16-360-2002 |
塑料管道系统.无压地下排水系统用管道系统.耐热循环和外部负载的试验方法 |
(Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.) |
NF P16-361-3-1997 |
无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第3部分:配件 |
(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.) |
NF P16-361-5-1997 |
无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第5部分:接头的适用性 |
(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.) |
NF P16-361-6-1997 |
无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第6部分:安装实施规程 |
(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.) |
NF P16-364-1-2003 |
地下非压力排水和污水管网更新用塑料管道系统.第1部分:总则 |
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general.) |
NF P16-364-3-2003 |
地下非压力排水和污水管网更新用塑料管道系统.第3部分:紧配合管用衬层 |
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.) |
NF P16-364-4-2003 |
地下非压力排水和污水网用塑料管道系统.第4部分:现场固化管用的管衬 |
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.) |
NF P16-400-1997 |
建筑物外压力脱水系统 |
(PRESSURE SEWERAGE SYSTEMS OUTSIDE BUILDINGS. (EUROPEAN STANDARD EN 1671).) |
NF P16-401-1947 |
椭圆形下水道内剖面 |
(PIPING. INTERNAL CROSS-SECTIONS OF OVOID SEWERS.) |
NF P16-451-1-2002 |
轻液体(例如:油和石油)分离器系统.第1部分:产品设计、性能和测试、标记和质量控制的原则 |
(Separator systems for light liquids (for example, oil and petrol) - Part 1 : principles of product design, performance and testing, marking and quality control.) |
NF P16-451-2-2003 |
轻液体(例如:油和石油)分离器系统.第2部分:标称尺寸、安装、运行和维护的选择 |
(Separator systems for light liquids (for example oil and petrol) - Part 2 : selection of nominal size, installation, operation and maintenance.) |
NF P16-500-2-2002 |
油脂分离器.第2部分:标称尺寸的选择、安装、操作和维护 |
(Grease separators - Part 2 : selection of nominal size, installation, operation and maintenance.) |
NF P16-600-1997 |
废水处理.词汇 |
(WASTEWATER TREATMENT. VOCABULARY. (EUROPEAN STANDARD EN 1085).) |
NF P16-700-1-2002 |
废水处理厂.第1部分:一般建造原则 |
(Wastewater treatment plants - Part 1 : general construction principles.) |
NF P16-700-10-2001 |
污水处理厂.第10部分:安全原则 |
(Wastewater treatment plants - Part 10 : safety principles.) |
NF P16-700-11-2001 |
废水处理厂.第11部分:要求的一般数据 |
(Wastewater treatment plants - Part 11 : general data required.) |
NF P16-700-13-2003 |
废水处理厂.第13部分:化学处理.通过沉淀/絮凝作用处理废水 |
(Wastewater treatment plants - Part 13 : chemical treatment - Treatment of wastewater by precipitation/flocculation.) |
NF P16-700-3-2001 |
污水处理厂.第3部分:预处理 |
(Wastewater treatment plants - Part 3 : preliminary treatment.) |
NF P16-700-4-2002 |
废水处理厂.第4部分:初步澄清 |
(Wastewater treatment plants - Part 4 : primary settlement.) |
NF P16-700-5-1999 |
废水处理设备.第5部分:污水池处理 |
(Wastewater treatment plants - Part 5 : lagooning processes.) |
NF P16-700-6-2002 |
废水处理厂.第6部分:活性污泥处理 |
(Wastewater treatment plants - Part 6 : activated sludge process.) |
NF P16-700-7-2002 |
废水处理厂.第7部分:固定生物膜反应器 |
(Wastewater treatment plants - Part 7 : biological fixed-film reactors.) |
NF P16-700-8-2001 |
废水处理厂.第8部分:污泥处理和储存 |
(Wastewater treatment plants - Part 8 : sludge treatment and storage.) |
NF P16-700-9-2002 |
污水处理厂.第9部分:气味控制和通风 |
(Wastewater treatment plants - Part 9 : odour control and ventilation.) |
NF P16-800-1-2000 |
50PT以下的小型废水处理系统.第1部分:预制化粪池 |
(Small wastewater tretament systems for up to 50 PT - Part 1 : prefabricated septic tanks.) |
NF P18-010-1985 |
混凝土.水硬性混凝土的名称和分类 |
(CONCRETE. CLASSIFICATION AND DESIGNATION OF HYDRAULIC CONCRETE.) |
NF P18-050-1995 |
混凝土飞灰的定义,要求和质量管理 |
(Fly ash for concrete. Definitions, requirements and quality control.) |
NF P18-051-1994 |
飞灰试验方法.第1部分:游离氧化钙的测定 |
(METHOD OF TESTING FLY ASH. PART 1 : DETERMINATION OF FREE CALCIUM OXIDE CONTENT. (EUROPEAN STANDARD EN 451-1).) |
NF P18-052-1994 |
飞灰试验方法.第2部分:湿筛选细度 |
(METHOD OF TESTING FLY ASH. PART 2 : DETERMINATION OF FINENESS BY WET SIEVING. (EUROPEAN STANDARD EN 451-2).) |
NF P18-139-2003 |
灰浆集料 |
(Aggregates for mortar.) |
NF P18-140-1996 |
预应力钢筋混凝土构件用的泥浆.普通泥浆规范 |
(Grout for prestressing tendons. Specification for common grout.) |
NF P18-141-1996 |
预应力钢筋混凝土构件用的泥浆的试验方法 |
(Grout for prestressing tendons. Test methods.) |
NF P18-142-1996 |
预应力钢筋混凝土构件用的泥浆的灌浆程序 |
(Grout for prestressing tendons. Grouting procedures.) |
NF P18-160-1997 |
预应力钢筋混凝土构件用钢筋鞘管.术语、要求和质量控制(欧洲标准EN 523) |
(Steel strip sheaths for prestressing tendons. Terminology, requirements, quality control.) |
NF P18-161-1997 |
预应力钢筋混凝土构件用钢筋鞘管.试验方法.第1部分:形状和尺寸的测定(欧洲标准EN 524-1) |
(Steel strip sheaths for prestressing tendons. Test methods. Part 1 : determination of shape and dimensions.) |
NF P18-162-1997 |
预应力钢筋混凝土构件用钢筋鞘管.试验方法.第2部分:挠性测定(欧洲标准EN 524-2) |
(Steel strip sheaths for prestressing tendons. Test methods. Part 2 : determination of flexural behaviour.) |
NF P18-163-1997 |
预应力钢筋混凝土构件用钢筋鞘管.试验方法.第3部分:往复弯曲试验(欧洲标准EN 524-3) |
(Steel strip sheaths for prestressing tendons. Test methods. Part 3 : to-and-fro bending test.) |
NF P18-164-1997 |
预应力钢筋混凝土构件用钢筋鞘管.试验方法.第4部分:侧面负荷阻力的测定(欧洲标准EN 524-4) |
(Steel strip sheaths for prestressing tendons. Test methods. Part 4 : determination of lateral load resistance.) |
NF P18-165-1997 |
预应力钢筋混凝土构件用钢筋鞘管.试验方法.第5部分:拉伸阻力的测定(欧洲标准EN 524-5) |
(Steel strip sheaths for prestressing tendons. Test methods. Part 5 : determination of tensile load resistance.) |
NF P18-166-1997 |
预应力钢筋混凝土构件用钢筋鞘管.试验方法.第6部分:水损失的测定(欧洲标准EN 524-6) |
(Steel strip sheaths for prestressing tendons. Test methods. Part 6 : determination of leaktightness (determination of water loss).) |
NF P18-179-1-2001 |
沥青混合料中用填充骨料的试验.第1部分:三角环和球试验 |
(Tests for filler aggregate used in bituminous mixtures - Part 1 : delta ring and ball test.) |
NF P18-179-2-2001 |
沥青混合料中用填充骨料的试验.第2部分:沥青值 |
(Tests for filler aggregate used in bituminous mixtures - Part 2 : bitumen number.) |
NF P18-201/A1-1999 |
DTU 21.建筑工程.混凝土工程的实施.技术规范 |
(DTU 21 - Building works - Execution of concrete works - Technical specifications.) |
NF P18-201/A2-2001 |
DTU 21.建筑工程.混凝土工程的实施.技术规范 |
(DTU 21 - Building works - Execution of concrete works - Technical specifications.) |
NF P18-2011-1999 |
DTU 21.NF P18-201-93的补充件1 |
() |
NF P18-210-1993 |
DTU 23-1.建筑工程.现场浇灌的混凝土墙.技术规范 |
(DTU 23-1. Building works. In situ formed concrete walls. Technical specifications.) |
NF P18-211-2003 |
混凝土搅拌用水.混凝土搅拌用水(包括混凝土加工过程中回收的水)的适用性的取样、试验、评定规范 |
(Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete.) |
NF P18-242-2003 |
土木工程和路面结构用非粘合和液压粘合材料用集料 |
(Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction.) |
NF P18-306-1965 |
混凝土.粒状熔渣 |
(CONCRETES. GRANULAR SLAG.) |
NF P18-307-1965 |
其它混凝土.膨胀矿渣 |
(MISCELLANEOUS CONCRETES. EXPANDED SLAG.) |
NF P18-308-1965 |
其它混凝土.火山灰 |
(MISCELLANEOUS CONCRETES. POZZOLAN.) |
NF P18-309-1982 |
集料.转炉制造中用于浇制混凝土膨胀页岩或粘土碎石料 |
(Aggregates. Rotary-furnace made expanded clay and shale for making concretes.) |
NF P18-310-1998 |
混凝土添加剂.砖石和灰浆.试验方法.第1部分:试验用基准混凝土和混凝灰浆 |
(Admixtures for concrete, mortar and grout. Test methods. Part 1 : reference concrete and reference mortar for testing.) |
NF P18-311-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第2部分:凝结时间的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 2 : determination of setting time.) |
NF P18-313-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第4部分:混凝土泌水性的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 4 : determination of bleeding of concrete.) |
NF P18-314-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第5部分:毛细吸收的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 5 : determination of capillary absorption.) |
NF P18-315-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第6部分:红外线分析 |
(Admixtures for concrete, mortar and grout. Test methods. Part 6 : infrared analysis.) |
NF P18-317-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第8部分:干性物质含量的常规测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 8 : determination of the conventional dry material content.) |
NF P18-319-1996 |
混凝土、灰泥和薄浆混合料.试验方法.第10部分:水溶性氯化物的含量测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 10 : determination of water soluble chloride content.) |
NF P18-320-1999 |
混凝土、砂石和灰浆用添加剂.试验方法.第11部分:硬化混凝土中气体空隙特性的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 11 : determination of air void characteristics in hardened concrete.) |
NF P18-321-1998 |
混凝土添加剂.砖石和灰浆.试验方法.第12部分:添加剂碱性含量的测定 |
(Admixtures for concrete, mortar and grout. Test methods. Part 12 : determination of the alkali content of admixtures.) |
NF P18-323-2003 |
混凝土、灰浆和灌浆混合物.试验方法.第13部分:灰浆混合物测试用标准砌砖灰浆 |
(Admixtures for concrete, mortar and grout - Test methods - Part 13 : reference masonry mortar for testing mortar admixtures.) |
NF P18-325-2002 |
混凝土.第1部分:规范、性能、生产及一致性 |
(Concrete - Part 1 : specification, performance, production and conformity.) |
NF P18-342-2002 |
混凝土,灰浆和灌浆外加剂.第2部分:混凝土外加剂,定义,要求,一致性,标记和标签 |
(Admixtures for concrete, mortar and grout - Part 2 : concrete admixtures - Definitions, requirements, conformity, marking and labelling.) |
NF P18-344-2002 |
混凝土、砂浆和灌浆用外加剂.第4部分:预应力钢筋束用外加剂.定义、要求、一致性、标记和标签 |
(Admixtures for concrete, mortar and grout - Part 4 : admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling.) |
NF P18-346-2002 |
混凝土,灰浆和灌浆混合物.第6部分:取样、合格控制及合格评定 |
(Admixtures for concrete, mortar and grout - Part 6 : sampling, conformity control and evaluation of conformity.) |
NF P18-350-1986 |
混凝土、砂浆和灰浆添加剂.标准水泥 |
(Concrete, mortar and grout admixtures. Reference cements.) |
NF P18-352-1986 |
混凝土、砂浆和灰浆添加剂.恒定和易性效率试验添加剂混凝土和砂浆拌和加水量的测定 |
(Concrete, mortar and grout admixtures. Determination of the water requirements of concretes and mortars with admixtures when subjected to performance tests at constant workability.) |
NF P18-353-1985 |
混凝土、砂浆和灰浆添加剂.气量计测定新拌混凝土内封闭空气的百分比 |
(CONCRETE,MORTAR AND GROUT ADMIXTURES. MEASUREMENT OF THE PERCENTAGE OF ENTRAINED AIR IN FRESH CONCRETE USING AN AIR METER.) |
NF P18-370-1995 |
添加剂.混凝土和砂浆用养护产品.定义,规范和标记 |
(ADMIXTURES. CURING PRODUCTS FOR CONCRETE AND MORTAR. DEFINITION, SPECIFICATIONS AND MARKING.) |
NF P18-371-1995 |
添加剂.混凝土和砂浆用养护产品.防护系数的测定 |
(ASMIXTURES. CURING PRODUCTS FOR CONCRETE AND MORTAR. DETERMINATION OF PROTECTIVE COEFFICIENT.) |
NF P18-400-1981 |
混凝土.圆柱形和三棱形样模 |
(CONCRETES. MOULDS FOR CYLINDRICAL AND PRISMATIC TEST SPECIMENS.) |
NF P18-404-1981 |
混凝土.适用性和检验研究试验.试样制备和保管 |
(Concretes. Study, suitability and control tests. Manufacture and storage of test specimens.) |
NF P18-405-1981 |
混凝土.信息试验.试样制备和保管 |
(Concretes. Information tests. Manufacture and storage of test specimens.) |
NF P18-407-1981 |
混凝土.弯曲试验 |
(Concretes. Binding test.) |
NF P18-408-1981 |
混凝土.劈裂试验 |
(Concretes. SPLIT0ING test.) |
NF P18-411-1981 |
混凝土.硬材料弯曲.压缩和拉力试验用液压机的一般特性 |
(Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.) |
NF P18-412-1981 |
混凝土.硬材料压缩试验用液压机的特殊性能 |
(Concretes. Individual properties of hydraulic machines for compression tests. (presses for hard materials).) |
NF P18-413-1981 |
混凝土.硬材料弯曲试验用液压机的特殊性能 |
(Concretes. Individual properties of hydraulic machines for bending tests of hard materials.) |
NF P18-421-1981 |
混凝土.微型振捣台灌筑 |
(CONCRETES. PLACING BY MEANS OF VIBRATING MICROTABLE.) |
NF P18-422-1981 |
混凝土.振捣棒灌筑 |
(Concretes. Placing by means of vibrating needle.) |
NF P18-423-1981 |
混凝土.钎捣灌筑 |
(Concretes. Placing by means of rodding.) |
NF P18-427-1996 |
混凝土.水硬性混凝土试样两个相对面之间尺寸变化的测定 |
(CONCRETE. DETERMINATION OF THE DIMENSIONAL VARIATIONS BETWEEN TWO OPPOSITE FACES OF HARDENED CONCRETE TEST SPECIMENS.) |
NF P18-430-2001 |
硬化混凝土试验.第1部分:样品和模型的形状、尺寸和其它要求 |
(Testing hardened concrete - Part 1 : shape, dimensions and other requirements for test specimens and moulds.) |
NF P18-431-2001 |
试验用新浇混凝土.第4部分:密实度等级 |
(Testing fresh concrete - Part 4 : degree of compactability.) |
NF P18-433-2001 |
硬化混凝土试验.第5部分:试样的弯曲强度 |
(Testing hardened concrete - Part 5 : flexural strength of test specimens.) |
NF P18-434-2001 |
硬化混凝土试验.第6部分:试样的抗拉伸撕裂强度 |
(Testing hardened concrete - Part 6 : tensile splitting strength of test specimens.) |
NF P18-435-2001 |
硬化混凝土试验.第7部分:硬化混凝土密度 |
(Testing hardened concrete - Part 7 : density of hardened concrete.) |
NF P18-436-2001 |
硬化混凝土试验.第8部分:加压时水的渗透深度 |
(Testing hardened concrete - Part 8 : depth of penetration of water under pressure.) |