标准号 |
中文名称 |
英文名称 |
ASTM E 328-1986 |
材料和结构件的应力松弛试验 |
Stress Relaxation Tests for Materials and Structures |
ASTM E 329-2000 |
建筑用材料的试验和/或检查机构的标准规范 |
Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction |
ASTM E 330-1997 |
用统一静态气压差法测定外窗、幕墙和门结构性能的试验方法 |
Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference |
ASTM E 331-1996 |
用统一的静态气压差法测定外窗,护墙和门渗水度的测试方法 |
Test Method for Water Penetration of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference |
ASTM E 334-2001 |
红外线微量分析的一般技术的标准操作规程 |
Standard Practice for General Techniques of Infrared Microanalysis |
ASTM E 335-1996 |
用均苯四酸二酐的脂化作用测定羟基团的试验方法 |
Test Method for Hydroxyl Groups by Pyromellitic Dianhydride Esterification |
ASTM E 336-1997 |
建筑物中隔音性能的测量试验方法 |
Test Method for Measurement of Airborne Sound Insulation in Buildings |
ASTM E 337-1984 |
干湿球湿度计测定湿度的试验方法(湿球和干球温度的测量) |
Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM E 338-1991 |
高强度薄板材料的锐切口张力试验方法 |
Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials |
ASTM E 34-1994 |
铝和铝基合金化学分析的测试方法 |
Test Methods for Chemical Analysis of Aluminum and Aluminum Base Alloys |
ASTM E 340-2000 |
金属和合金宏观腐蚀的标准试验方法 |
Standard Test Method for Macroetching Metals and Alloys |
ASTM E 341-1996 |
用能量平衡法测量等离子体电弧气体焓 |
Measuring Plasma Arc Gas Enthalpy by Energy Balance |
ASTM E 342-1999 |
铬矿石中氧化铬的标准试验方法 |
Standard Test Method for Chromium Oxide in Chrome Ores |
ASTM E 343-1996 |
通过分析裂变剂量计产生的钼99的放射性来测定反应速率的试验方法 |
Test Method for Measuring Reaction Rates by Analysis of Molybdenum-99 Radioactivity from Fission Dosimeters |
ASTM E 344-2001 |
温度测定和液体比重测定的有关术语 |
Terminology Relating to Thermometry and Hydrometry |
ASTM E 344a-2001 |
温度测定和液体比重测定的有关术语 |
Terminology Relating to Thermometry and Hydrometry |
ASTM E 345-1993 |
金属箔的抗拉试验方法 |
Test Methods of Tension Testing of Metallic Foil |
ASTM E 346-1999 |
甲醇分析的试验方法 |
Test Methods for Analysis of Methanol |
ASTM E 347-1998 |
多价酸中灰分的标准测试方法 |
Standard Test Method for Ash in Polybasic Acids |
ASTM E 348-1969 |
适于人使用的空间设备 |
Man-Rated Space Facilities |
ASTM E 349-1972 |
空间模拟装置的有关术语 |
Terminology Relating to Space Simulation |
ASTM E 35-1988 |
镁和镁合金的化学分析试验方法 |
Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys |
ASTM E 350-1995 |
碳素钢,低合金钢,硅电炉钢,铁锭和熟铁的化学分析的测试方法 |
Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron and Wrought Iron |
ASTM E 351-1993 |
铸铁的化学分析方法.各种型号 |
Test Methods for Chemical Analysis of Cast Iron - All Types |
ASTM E 352-1993 |
工具钢及其它类似中合金钢和高合金钢的化学分析试验方法 |
Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
ASTM E 353-1993 |
不锈钢、耐热钢、马氏体钢和其它类似的铬镍铁合金的化学分析试验方法 |
Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging and Other Similar Chromium-Nickel-Iron Alloys |
ASTM E 354-1993 |
高温钢、电炉钢、磁钢和其它类似的铁、镍和钴合金的化学分析试验方法 |
Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic and Other Similar Iron, Nickel and Cobalt Alloys |
ASTM E 355-1996 |
气相色谱法的术语和相互关系 |
Gas Chromatography Terms and Relationships |
ASTM E 356-1978 |
光谱仪的介绍和说明 |
Describing and Specifying the Spectrograph |
ASTM E 357-1998 |
用过氧化钠弹燃烧法测定有机化合物中磷的试验方法 |
Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition |
ASTM E 358-1995 |
磷酸分析的试验方法 |
Test Methods for Analysis of Phosphoric Acid |
ASTM E 359-2000 |
苏打灰(纯碱)分析的标准试验方法 |
Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
ASTM E 360-1996 |
硅和硅铁的化学分析试验方法 |
Test Methods for Chemical Analysis of Silicon and Ferrosilicon |
ASTM E 361-1999 |
测定锰铁中砷和铅的标准试验方法 |
Standard Test Methods for the Determination of Arsenic and Lead in Ferromanganese |
ASTM E 362-1999 |
测定硅锰合金和硅铁锰合金中砷和铅的标准试验方法 |
Standard Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese |
ASTM E 363-1983 |
铬和铬铁合金的化学分析试验方法 |
Methods for Chemical Analysis of Chromium and Ferrochromium |
ASTM E 364-1994 |
硅铬铁化学分析的测试方法 |
Test Methods for Chemical Analysis of Ferrochrome-Silicon |
ASTM E 365-1990 |
钒铁合金和钒合金掺和剂的化学分析试验方法 |
Test Methods for Chemical Analysis of Ferrovanadium and Vanadium Alloying Additives |
ASTM E 367-1983 |
钶铁合金的化学分析试验方法 |
Methods for Chemical Analysis of Ferrocolumbium |
ASTM E 37-1995 |
铅锭的化学分析试验方法 |
Test Methods for Chemical Analysis of Pig Lead |
ASTM E 371-1989 |
硼铁合金的化学分析试验方法 |
Test Methods for Chemical Analysis of Ferroboron |
ASTM E 372-1984 |
镁铁硅合金的化学分析试验方法 |
Test Method for Chemical Analysis of Magnesium Ferrosilicon |
ASTM E 376-1996 |
用磁场或涡流(电磁的)试验法测量覆层厚度 |
Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods |
ASTM E 377-1996 |
烧蚀材料内部温度的测量 |
Internal Temperature Measurements in Ablative Materials |
ASTM E 378-1997 |
用粉末技术做银的光谱分析试验方法 |
Test Method for Spectrographic Analysis of Silver by the Powder Technique |
ASTM E 381-1998 |
由棒材、坯段、大方坯和锻件组成的钢制品的宏观浸蚀试验、检验及评定 |
Macroetch Testing, Inspection and Rating Steel Products, Comprising Bars, Billets, Blooms and Forgings |
ASTM E 382-1997 |
测定铁矿石块破碎强度的试验方法 |
Test Method for Determination of Crushing Strength of Iron Ore Pellets |
ASTM E 384-1999 |
材料显微硬度的标准试验方法 |
Standard Test Method for Microindentation Hardness of Materials |
ASTM E 385-1990 |
使用14兆电子伏特的中子活化和直接计数技术测定含氧量的试验方法 |
Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique |
ASTM E 386-1990 |
与高分辨率核磁共振(NMR)分光计有关的数据说明 |
Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy |
ASTM E 387-1984 |
用不透明滤光器估算分光光度计杂散辐射功率的试验方法 |
Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method |
ASTM E 388-1972 |
荧光分光计的光谱带宽和光波波长精密度的测试方法 |
Test Method for Spectral Bandwidth and Wavelength Accuracy of Fluorescence Spectrometers |
ASTM E 389-1993 |
用4号筛(4.75mm)及较粗筛进行金属轴承矿石及相关材料的粒径或筛分的试验方法 |
Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal Bearing Ores and Related Materials |
ASTM E 390-2001 |
钢熔焊连接用标准参考射线照片 |
Standard Reference Radiographs for Steel Fusion Welds |
ASTM E 391-1995 |
相位图的表示 |
Presentation of Phase Diagrams |
ASTM E 393-1996 |
通过分析由裂变剂量计产生的钡140来测定反应速率的试验方法 |
Test Method for Measuring Reaction Rates by Analysis of Barium- 140 from Fission Dosimeters |
ASTM E 394-2000 |
用1,10-菲咯啉法测定痕量铁值的标准试验方法 |
Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
ASTM E 395-1995 |
用燃烧碘酸盐滴定法对铁矿石中硫量的测试方法 |
Test Method for Total Sulfur in Iron Ore by Combustion-Iodate Titration |
ASTM E 396-1998 |
镉的化学分析试验方法 |
Test Methods for Chemical Analysis of Cadmium |
ASTM E 399-1990 |
金属材料水平变形断裂强度的测试方法 |
Test Method for Plane-Strain Fracture Toughness of Metallic Materials |
ASTM E 4-1999 |
试验机的力验证 |
Force Verification of Testing Machines |
ASTM E 400-1997 |
用燃烧检测预精选技术对矿石、矿物和岩石做光谱测定分析的标准试验方法 |
Standard Test Method for Analysis of Ores, Minerals, and Rocks by the Fire Assay Preconcentration Optical Emission Spectroscopy |
ASTM E 402-1995 |
用镓氧载体技术作铀氧化物(U308)光谱分析的测试方法 |
Standard Test Method for Spectrographic Analysis of Uranium Oxide (U308) |
ASTM E 404-1995 |
用点对面技术测定碳素钢和低合金钢中硼含量的光谱测定的测试方法 |
Test Method for Spectrographic Determination of Boron in Carbon and Low Alloy Steel by the Point-to-Plane Technique |
ASTM E 405-1989 |
窗转轴的磨损试验方法 |
Test Methods for Wear Testing Rotary Operators for Windows |
ASTM E 406-1981 |
光谱化学分析中大气的监测 |
Using Controlled Atmospheres in Spectrochemical Analysis |
ASTM E 407-1999 |
金属和合金微蚀的标准操作规程 |
Standard Practice for Microetching Metals and Alloys |
ASTM E 408-1971 |
用监测仪技术测定表面正常总辐射的试验方法 |
Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
ASTM E 409-1985 |
微光度计的样式和性能的标准规程 |
Standard Practice for Description and Performance of the Microphotometer |
ASTM E 41-1992 |
状态调节的有关术语 |
Terminology Relating to Conditioning |
ASTM E 410-1998 |
液氯中水和残渣的试验方法 |
Test Method for Moisture and Residue in Liquid Chlorine |
ASTM E 411-1992 |
用2,4-二硝基苯肼测定羟基化合物痕量的试验方法 |
Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine |
ASTM E 412-1993 |
液氯检定的试验方法(锌汞合金法) |
Test Method for Assay of Liquid Chlorine (Zinc Amalgam Method) |
ASTM E 413-1987 |
隔音等级的分类 |
Classification for Rating Sound Insulation |
ASTM E 415-1999 |
碳和低合金钢光辐射真空光谱测定分析的测试方法 |
Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel |
ASTM E 416-1998 |
光谱化学实验室的计划和安全操作 |
Planning and Safe Operation of a Spectrochemical Laboratory |
ASTM E 421-1988 |
高纯度铁中硅和铝含量的光谱测定的试验方法 |
Test Method for Spectrographic Determination of Silicon and Aluminum in High-Purity Iron |
ASTM E 422-1999 |
用水冷量热计测量热通量的标准试验方法 |
Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter |
ASTM E 423-1971 |
升温时非传导样品的正常光谱发射试验方法 |
Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens |
ASTM E 424-1971 |
簿板材料的太阳能传播和反射的试验方法 |
Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
ASTM E 426-1998 |
无缝焊接管形产品、奥氏体不锈钢的类似合金的电磁(涡电流)检验 |
Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys |
ASTM E 427-1995 |
用卤素检漏器(碱离子二极管)作泄漏试验 |
Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
ASTM E 428-1992 |
超声波检验用钢标准块的制造和管理规程 |
Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Inspection |
ASTM E 429-1978 |
用积分球仪测量和计算金属表面反射性的试验方法 |
Test Method for Measurement and Calculation of Reflecting Characteristics of Metallic Surfaces Using Integrating Sphere Instruments |
ASTM E 430-1997 |
用滤色测角光度计测定高度光滑表面光滑度的试验方法 |
Test Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry |
ASTM E 431-1996 |
半导体器件及有关器件的X射线照片的指南 |
Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
ASTM E 432-1991 |
渗漏试验方法的选择 |
Selection of a Leak Testing Method |
ASTM E 433-1971 |
液体渗透检查用参考图片 |
Reference Photographs for Liquid Penetrant Inspection |
ASTM E 434-1971 |
用太阳模拟装置作阳光吸收与半球发光量的比率及半球发光量的热量计测定的试验方法 |
Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation |
ASTM E 436-1991 |
铁素体钢的坠重破裂试验方法 |
Test Method for Drop-Weight Tear Tests of Ferritic Steels |
ASTM E 437-1992 |
工业用金属丝布及筛(方孔系列) |
Industrial Wire Cloth and Screens (Square Opening Series) |
ASTM E 438-1992 |
实验室用玻璃器皿 |
Glasses in Laboratory Apparatus |
ASTM E 439-1998 |
铍化学分析的试验方法 |
Test Methods for Chemical Analysis of Beryllium |
ASTM E 444-1998 |
审讯文件方面涉及法学工作领域的说明 |
Descriptions of Scopes of Work Relating to Forensic Sciences for Questioned Document Area |
ASTM E 445/E 445M-1988 |
装有足尺寸轮胎的客车在铺覆路面上刹车距离的试验方法 |
Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires |
ASTM E 446-1998 |
钢铸件厚度在2 in(51mm)以下用基准射线照相 |
Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness |
ASTM E 447-1997 |
砌块抗压强度的试验方法 |
Test Methods for Compressive Strength of Masonry Prisms |
ASTM E 448-1982 |
金属材料的回跳硬度试验 |
Scleroscope Hardness Testing of Metallic Materials |
ASTM E 449-1996 |
氯化钙分析的试验方法 |
Test Methods for Analysis of Calcium Chloride |
ASTM E 45-1997 |
钢中杂质含量的测定 |
Determining the Inclusion Content of Steel |
ASTM E 452-1997 |
用光测高温计作耐火金属热电偶校准的试验方法 |
Test Method for Calibration of Refractory Metal Thermocouples Using an Optical Pyrometer |
ASTM E 453-1979 |
燃料件的包覆检验包括机械性能的测定 |
Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties |
ASTM E 454-1980 |
工业用多孔板及筛(方孔系列) |
Industrial Perforated Plate and Screens (Square Opening Series) |
ASTM E 455-1998 |
建筑物用构架地板或屋面薄膜结构的静负荷试验 |
Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings |
ASTM E 456-1996 |
统计学名词及相关术语 |
Terminology Relating to Quality and Statistics |
ASTM E 457-1996 |
用热容量(芯棒)热量计测量传热速率的试验方法 |
Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter |
ASTM E 458-1972 |
烧蚀的热试验方法 |
Test Method for Heat of Ablation |
ASTM E 459-1997 |
用薄皮热量计测量热传递速率的试验方法 |
Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter |
ASTM E 460-1988 |
食品和饮料在贮藏期间的包装效果的测定 |
Determining Effect of Packaging on Food and Beverage Products During Storage |
ASTM E 463-1998 |
用硅钼酸盐(光度计)法测定荧石中二氧化硅含量的试验方法 |
Test Method for Silica in Fluorspar by the Silico-Molybdate (Photometric) Method |
ASTM E 465-1995 |
锰矿石中二氧化锰含量的试验方法 |
Test Methods for Manganese Dioxide in Manganese Ores |
ASTM E 466-1996 |
金属材料上进行的恒定振幅轴向疲劳试验 |
Conducting Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 467-1998 |
轴向负载疲劳试验系统中恒振幅动态负载的验证 |
Verification of Constant Amplitude Dynamic Loads on Displacements in an Axial Load Fatigue Testing System |
ASTM E 468-1990 |
金属材料恒振幅疲劳试验结果的显示规程 |
Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
ASTM E 47-1993 |
锌压铸合金的化学分析试验方法 |
Test Methods for Chemical Analysis of Zinc Die-Casting Alloys |
ASTM E 471-1996 |
用机械加工法和称重法获得烧蚀材料炭密度纵面图的试验方法 |
Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing |
ASTM E 473-1994 |
与热分析相关的术语的定义 |
Definitions of Terms Relating to Thermal Analysis |
ASTM E 475-1995 |
用气体色层分离分析法检定二特丁基过氧化物的试验方法 |
Test Method for Assay of Di-Tert-Butyl Peroxide by Gas Chromatographic Analysis |
ASTM E 476-1987 |
封闭的冷凝系统中热不稳定性的试验方法 |
Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test) |
ASTM E 477-1999 |
测定导管衬里材料及预制消音材料的音响及气流特性的标准试验方法 |
Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers |