标准号 |
中文名称 |
英文名称 |
ASTM D 901-1991 |
氯低联苯试验 |
Testing Askarels |
ASTM D 902-1995 |
电绝缘用挠性涂树脂玻璃布和玻璃布带的测试方法 |
Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
ASTM D 903-1998 |
胶粘剂抗剥落或剥离强度的试验方法 |
Test Method for Peel or Stripping Strength of Adhesive Bonds |
ASTM D 904-1999 |
胶粘剂试样在人造光中暴露试验的标准实施规范 |
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
ASTM D 905-1998 |
压缩荷载法测定胶粘剂的抗剪切强度特性的试验方法 |
Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 906-1998 |
拉力负荷法测定胶合板结构中胶粘剂抗剪切强度特性的试验方法 |
Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
ASTM D 907-1996 |
胶粘剂术语 |
Terminology of Adhesives |
ASTM D 909-2001 |
增压法测定航空汽油抗震特性的标准试验方法 |
Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method |
ASTM D 91-1997 |
润滑油沉淀值的试验方法 |
Test Method for Precipitation Number of Lubricating Oils |
ASTM D 910-2001 |
航空汽油标准规范 |
Standard Specification for Aviation Gasolines |
ASTM D 912-1981 |
防污涂料用氧化亚铜 |
Cuprous Oxide for Use in Antifouling Paints |
ASTM D 913-1988 |
路标漆耐磨程度的评价方法 |
Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint |
ASTM D 914-1995 |
乙基纤维的试验方法 |
Test Methods for Ethylcellulose |
ASTM D 918-1999 |
纸和纸板的抗粘结性试验方法 |
Test Method for Blocking Resistance of Paper and Paperboard |
ASTM D 919-1997 |
纸和纸板铜值的试验方法 |
Test Method for Copper Number of Paper and Paperboard |
ASTM D 92-2001 |
用克利夫兰开杯测定闪点和燃点的标准试验方法 |
Standard Test Method for Flash and Fire Points by Cleveland Open Cup |
ASTM D 922-2000 |
非硬质聚氯乙烯管标准规范 |
Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing |
ASTM D 923-1997 |
电绝缘液体的抽样的试验方法 |
Test Method for Sampling Electrical Insulating Liquids |
ASTM D 924-1999 |
电绝缘液体的损耗因数(或功率因数)和电容率(介电常数)的标准测试方法 |
Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids |
ASTM D 925-1988 |
橡胶特性.表面着色(接触、色移和扩散)的试验方法 |
Test Methods for Rubber Property - Staining of Surfaces (Contact, Migration and Diffusion) |
ASTM D 926-1998 |
橡胶性能的试验方法.用平行板法测量塑性和弹性 |
Test Method for Rubber Property - Plasticity and Recovery (Parallel Plate Method) |
ASTM D 928-1987 |
碳酸氢钠 |
Sodium Bicarbonate |
ASTM D 929-1985 |
硼砂 |
Borax |
ASTM D 93-1997 |
用潘斯基-马丁斯仪闭杯闪点测定器测定闪点的试验方法 |
Test Methods for Flash Point by Pensky-Martens Closed Tester |
ASTM D 930-1989 |
水溶性铝除垢剂的全浸腐蚀试验方法 |
Test Method of Total Immersion Corrosion Test of Water-Soluble Aluminum Cleaners |
ASTM D 932-1985 |
水和水沉积物中嗜铁细菌含量的测试方法 |
Test Method for Iron Bacteria in Water and Water-Formed Deposits |
ASTM D 933-1984 |
水沉积物的检验和分析结果的报告方法 |
Reporting Results of Examination and Analysis of Water-Formed Deposits |
ASTM D 934-1980 |
用X射线衍射法作水沉积物中结晶化合物的识别方法 |
Identification of Crystalline Compounds in Water-Formed Deposits by X-Ray Diffraction |
ASTM D 937-1997 |
石油脂的针入度试验方法 |
Test Method for Cone Penetration of Petrolatum |
ASTM D 938-1992 |
石油蜡(包括凡士林)凝固点的测试方法 |
Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum |
ASTM D 94-1993 |
石油产品的皂化值试验方法 |
Test Method Saponification Number of Petroleum Products |
ASTM D 942-1990 |
氧弹法测定润滑脂氧化稳定性的试验方法 |
Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method |
ASTM D 943-1999 |
防腐蚀矿物油氧化特性的试验方法 |
Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
ASTM D 945-1992 |
用机械示波器测定在压缩应力和剪切应力下橡胶特性的试验方法 |
Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph) |
ASTM D 946-1982 |
路面建造用按贯入度级配的沥青膏 |
Penetration-Graded Asphalt Cement for Use in Pavement Construction |
ASTM D 95-1999 |
蒸馏法测定石油产品和沥青材料中水含量的试验方法 |
Test Method for Water in Petroleum Products and Bituminous Materials by Distillation |
ASTM D 950-1998 |
胶粘剂抗冲击强度的试验方法 |
Test Method for Impact Strength of Adhesive Bonds |
ASTM D 951-1999 |
用喷射法测定船运集装箱耐水性的标准试验方法 |
Standard Test Method for Water Resistance of Shipping Containers by Spray Method |
ASTM D 952-1995 |
薄板塑料和电绝缘材料粘结强度的试验方法 |
Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulation Materials |
ASTM D 953-1995 |
塑料支承强度的测试方法 |
Test Method for Bearing Strength of Plastics |
ASTM D 955-1989 |
模制塑料模型尺寸收缩率的测量方法 |
Test Method of Measuring Shrinkage from Mold Dimensions of Molded Plastics |
ASTM D 957-1995 |
塑料生产用模型表面温度的测定 |
Determining Mold Surface Temperature of Commercial Molds for Plastics |
ASTM D 96-1988 |
离心法测定原油中水和沉淀的试验方法(现场程序) |
Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field Procedure) |
ASTM D 960-1979 |
生蓖麻油 |
Raw Castor Oil |
ASTM D 961-1986 |
脱水蓖麻油 |
Dehydrated Castor Oil |
ASTM D 962-1981 |
涂料用铝粉和铝浆颜料 |
Aluminum Powder and Paste Pigments for Paints |
ASTM D 964-1965 |
防污漆用铜粉 |
Copper Powder for Use in Antifouling Paints |
ASTM D 968-1993 |
用落沙磨蚀法测定有机涂层耐磨性的试验方法 |
Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
ASTM D 969-1985 |
路标漆渗色程度的实验室试验方法 |
Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint |
ASTM D 97-1996 |
石油的倾点的试验方法 |
Test Method for Pour Point of Petroleum Oils |
ASTM D 971-1999 |
环法测定油水界面张力的试验方法 |
Test Method for Interfacial Tension of Oil Against Water by the Ring Method |
ASTM D 972-1997 |
润滑脂和润滑油蒸发损失的测试方法 |
Test Method for Evaporation Loss of Lubricating Greases and Oils |
ASTM D 974-1997 |
用颜色指示剂滴定法测定酸碱值的标准试验方法 |
Standard Test Method for Acid and Base Number by Color-Indicator Titration |
ASTM D 975-2002 |
柴油标准规范 |
Standard Specification for Diesel Fuel Oils |
ASTM D 976-1991 |
馏分燃料正十六烷指数的计算方法 |
Test Methods for Calculated Cetane Index of Distillate Fuels |
ASTM D 977-1998 |
乳化沥青 |
Emulsified Asphalt |
ASTM D 979-2001 |
沥青铺面混合料取样的标准实施规程 |
Standard Practice for Sampling Bituminous Paving Mixtures |
ASTM D 98-1998 |
氯化钙 |
Calcium Chloride |
ASTM D 984-1997 |
纸中可还原硫的试验方法 |
Test Methods for Reducible Sulfur in Paper |
ASTM D 985-1997 |
纸浆、纸和纸板亮度的试验方法(457nm上的定向反射) |
Test Method for Brightness of Pulp, Paper and Paperboard (Directional Reflectance at 457 nm) |
ASTM D 991-1989 |
橡胶特性.导电橡胶及抗静电橡胶制品的体电阻系数测试方法 |
Test Method for Rubber Property - Volume Resistivity of Electrically Conductive and Antistatic Products |
ASTM D 994-1998 |
混凝土用预制膨胀接缝填充料(沥青型) |
Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
ASTM D 995-1995 |
热搅拌、热铺沥青铺面混合料用搅拌设备 |
Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures |
ASTM D 996-1999 |
包装及分配环境的标准术语 |
Standard Terminology of Packaging and Distribution Environments |
ASTM D 998-1994 |
液体对淹没的载货船运集装箱的渗透性试验方法 |
Test Method for Penetration of Liquids into Submerged Loaded Shipping Containers |
ASTM D 999-2001 |
船运集装箱的振动标准试验方法 |
Standard Methods for Vibration Testing of Shipping Containers |
ASTM E 1-1998 |
ASTM温度计(试验方法9501-联邦试验方法NO.791b) |
ASTM Thermometers (Method 9501 - Federal Test Method No. 791b) |
ASTM E 10-2001 |
金属材料布氏硬度的标准试验方法 |
Standard Test Method for Brinell Hardness of Metallic Materials |
ASTM E 100-1995 |
ASTM流体比重计 |
ASTM Hydrometers |
ASTM E 1000-1998 |
射线检验法 |
Radioscopy |
ASTM E 1001-1999 |
运用纵波的浸入式脉冲回波超声法探测与评价不连续性 |
Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
ASTM E 1002-1996 |
使用超声波检漏 |
Testing for Leaks Using Ultrasonics |
ASTM E 1003-1995 |
静水压泄漏试验 |
Hydrostatic Leak Testing |
ASTM E 1004-1999 |
导电率的电磁(涡流)测量的标准规程 |
Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method |
ASTM E 1005-1997 |
反应堆压力容器监测E706(ⅢA)用辐射监视器的应用和分析的试验方法 |
Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA) |
ASTM E 1006-1996 |
试验反应堆E706(Ⅱ)用的物理剂量测定结果的分析和解释 |
Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II) |
ASTM E 1007-1997 |
通过天棚地板组件及其支承结构传导的夯击机械撞击声的现场测量方法 |
Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1008-1997 |
地热和其它高温液体设备用减压阀体的安装、检验及保养法 |
Installation, Inspection and Maintenance of Valve Body Pressure Relief Methods for Geothermal and Other High-Temperature Liquid Applications |
ASTM E 1009-1995 |
分析碳和低合金钢用光辐射真空分光仪的评估 |
Evaluating an Optical Emission Vacuum Spectro- meter to Analyze Carbon and Low-Alloy Steel |
ASTM E 101-1991 |
用点对面技术做铝和铝合金光谱分析的试验方法 |
Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique |
ASTM E 1010-1984 |
再溶化法作光谱化学分析用钢铁圆试样的制备 |
Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting |
ASTM E 1011-1996 |
硫酸 |
Sulfuric Acid |
ASTM E 1012-1999 |
在拉伸负载下试样找平的验证 |
Verification of Specimen Alignment Under Tensile Loading |
ASTM E 1013-1993 |
有关计算机处理系统的术语 |
Terminology Relating to Computerized Systems |
ASTM E 1014-1984 |
室外A加权声级测量 |
Measurement of Outdoor A-Weighted Sound Levels |
ASTM E 1016-1996 |
静电电子分光仪性能的规定和描述 |
Describing and Specifying the Properties of Electrostatic Electron Spectrometers |
ASTM E 1017-1988 |
住所外窗组件的一般性能要求 |
Generic Performance Requirements for Exterior Residential Window Assemblies |
ASTM E 1018-1995 |
ASTM评价的核数据文件的应用(ENDF/A).截面和不确定文件(E706ⅡB) |
Application of ASTM Evaluated Nuclear Data File (ENDF/A) - Cross Section and Uncertainty File, E 706(IIB) |
ASTM E 1019-1994 |
钢,铁,镍和钴合金中碳,硫,氮和氧含量的测定的测试方法 |
Test Methods for Determination of Carbon, Sulfur, Nitrogen and Oxygen in Steel and in Iron, Nickel and Cobalt Alloys |
ASTM E 102-1993 |
ASTM流体比重计 |
Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
ASTM E 1020-1996 |
事故报告 |
Reporting Incidents |
ASTM E 1021-1995 |
光电池的光谱响应测量的测试方法 |
Test Methods for Measuring the Spectral Response of Photovoltaic Cells |
ASTM E 1022-1994 |
用鱼和海水双壳类软体动物进行生物浓缩试验 |
Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Molluscs |
ASTM E 1023-1984 |
对水生生物及其使用的材料的危险性评估 |
Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
ASTM E 1024-1997 |
用火焰原子吸收分光光度测定法对金属和金属轴承矿石进行化学分析 |
Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry |
ASTM E 1025-1998 |
辐射摄影术用孔型图象质量指示仪 |
Hole-Type Image Quality Indicators Used for Radiography |
ASTM E 1026-1995 |
弗里克基准剂量测定系统的使用 |
Using the Fricke Reference Dosimetry System |
ASTM E 1027-1992 |
聚合材料电离辐射的辐照量 |
Exposure of Polymeric Materials to Ionizing Radiation |
ASTM E 1028-2000 |
用无重铬酸盐滴定分析法对铁矿石中总铁含量的试验方法 |
Test Method for Total Iron in Iron Ores by the Dichromate-Free Titrimetric Method |
ASTM E 1029-2001 |
临床实验室计算机系统文献工作的标准指南 |
Standard Guide for Documentation of Clinical Laboratory Computer Systems |
ASTM E 103-1984 |
金属材料的快速压痕硬度试验方法 |
Test Method for Rapid Indentation Hardness Testing of Metallic Materials |
ASTM E 1031-1996 |
炉渣的X射线辐射光谱测定分析的试验方法 |
Test Method for X-Ray Emission Spectrometric Analysis of Slags |
ASTM E 1032-2001 |
焊接件射线检验的标准试验方法 |
Standard Test Method for Radiographic Examination of Weldments |
ASTM E 1033-1998 |
在居里温度以上的F型连续焊接亚锰铁管的电磁(涡流)检验 |
Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
ASTM E 1034-1995 |
核设施工人瞬时记录 |
Nuclear Facility Transient Worker Records |
ASTM E 1035-1985 |
核反应堆堆芯压力容器支承结构的放射性辐照量的测定 |
Determining Radiation Exposures for Nuclear Reactor Vessel Support Structures |
ASTM E 1036-1996 |
使用标准电池的排列和非聚能地面光电模电气性能的标准试验方法 |
Standard Test Methods for Electrical Performance of nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells |
ASTM E 1037-1984 |
测定回收废燃料的粒度分布 |
Measuring Particle Size Distribution of RDF-5 |
ASTM E 1038-1998 |
通过撞击推动冰球法测定光电池组件抗冰雹能力的试验方法 |
Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls |
ASTM E 1039-1999 |
在全球辐射下硅非聚能器的地面光电基准电池的校准和特性的标准试验方法 |
Standard Test Method for Calibration of Silicon Non-Concentrator Photovoltaic Primary Reference Cells Under Global Irradiation |
ASTM E 104-1985 |
用水溶液保持恒定相对湿度 |
Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
ASTM E 1040-1998 |
非集中陆地光电压参照电池的物理特性 |
Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells |
ASTM E 1041-1985 |
敞开式办公室隔音的测量 |
Measurement of Masking Sound in Open Offices |
ASTM E 1042-1992 |
镘刀抹涂或喷涂用的吸音材料的分类 |
Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
ASTM E 1043-1985 |
牛奶和奶油检验用吸管 |
Pipets, Milk and Cream Examination |
ASTM E 1044-1996 |
血清玻璃吸管(一般用途和船形) |
Glass Serological Pipets (General Purpose and Kahn) |
ASTM E 1045-1985 |
沙式血红蛋白吸管 |
Pipet, Sahli Hemoglobin |
ASTM E 1046-1985 |
易处置的韦斯特格伦玻璃试管 |
Glass Westergren Tube, Disposable |
ASTM E 1047-1985 |
易处置的温特罗布血沉玻璃试管 |
Blood Sedimentation Tube, Wintrobe, Glass, Disposable |
ASTM E 1048-1988 |
抗凝剂涂覆的色码试管或容器 |
Color-Coding Pipets or Containers Coated with Anticoagulants |