标准号 |
中文名称 |
英文名称 |
| ASTM D 546-1999 |
道路和路面材料用矿物填料的筛分 |
Sieve Analysis of Mineral Filler for Road and Paving Materials |
| ASTM D 5460-1993 |
橡胶配料标准试验方法.橡胶添加剂中含水量的测定 |
Standard Test Method for Rubber Compounding Materials-Water in Rubber Additives |
| ASTM D 5461-1993 |
橡胶添加剂的标准试验方法.粉末橡胶化合物湿式筛析 |
Standard Test Method for Rubber Additives-Wet Sieve Analysis of Powdered Rubber Chemicals |
| ASTM D 5462-2001 |
水中低水平溶解氧在线测量的标准试验方法 |
Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water |
| ASTM D 5463-1998 |
水中无机成分测量用试验盒标准导则 |
Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water |
| ASTM D 5464-1993 |
低传导率水pH值测量的试验方法 |
Standard Test Methods for pH Measurement of Water of Low Conductivity |
| ASTM D 5465-1993 |
由沉积法分析的水测定微生物计数的标准规程 |
Standard Practice for Determining Microbial Counts from Waters Analyzed by Plating Methods |
| ASTM D 5466-2001 |
测定大气中挥发性有机化学物质的标准试验方法(罐装抽样法) |
Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology) |
| ASTM D 5467-1997 |
使用多层组合梁的单向聚合母体复合材料压缩特性的标准试验方法 |
Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
| ASTM D 5468-1995 |
废弃材料的总热值和灰值的标准试验方法 |
Standard Test Method for Gross Calorific and Ash Value of Waste Materials |
| ASTM D 5469-2000 |
新喷涂的聚氨酯泡沫和覆层屋顶系统应用的标准指南 |
Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems |
| ASTM D 5470-1995 |
空调的固定电器装置的热传输性能的标准试验方法 |
Standard Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials |
| ASTM D 5471-1997 |
O-二甲苯980标准规范 |
Standard Specification for O-Xylene 980 |
| ASTM D 5472-1993 |
在控制井上测定比容和评定过滤系数的标准试验方法 |
Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well |
| ASTM D 5473-1993 |
控制井部分渗透效应分析和无泄漏封闭蓄水层的水平和垂直液力传导性测定标准试验方法 |
Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer |
| ASTM D 5474-1993 |
地下水调查数据选择标准导则 |
Standard Guide for Selection of Data Elements for Ground-Water Investigations |
| ASTM D 5475-1993 |
用氮磷检测器通过气相色谱法测定水中含氮磷杀虫剂标准试验方法 |
Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector |
| ASTM D 5476-1999 |
热塑性聚氨酯材料的标准分类系统 |
Standard Classification System for Thermoplastic Polyurethane Materials |
| ASTM D 5477-1995 |
傅里叶变换红外线光谱法识别聚合物层或夹杂物的标准规程 |
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Spectroscopy (FT-IR)1 |
| ASTM D 5478-1998 |
落针粘度计测定材料粘度的标准试验方法 |
Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer |
| ASTM D 5479-1994 |
部分浸入的船舶涂层的耐生物污垢试验的标准规范 |
Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed |
| ASTM D 548-1997 |
纸张水溶解酸度或碱度的试验方法 |
Test Method for Water-Soluble Acidity or Alkalinity of Paper |
| ASTM D 5480-1995 |
气相色谱法测定发动机油挥发性标准试验方法 |
Standard Test Method for Engine Oil Volatility by Gas Chromatography |
| ASTM D 5481-1996 |
用多孔毛细管粘度计在高温高剪切率下测量表面粘性的标准试验方法 |
Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
| ASTM D 5482-2001 |
石油产品蒸气压力的标准试验方法(大气的小型法) |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric) |
| ASTM D 5483-2002 |
用压差扫描热量测定法测试润滑脂的氧化反应时间的标准试验方法 |
Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry |
| ASTM D 5484-1994 |
钢制网格式船桥地板的标准规范 |
Standard Specification for Steel Grid Bridge Flooring |
| ASTM D 5485-1994 |
用锥形腐蚀计测定燃烧制品的腐蚀效应的标准试验方法 |
Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter |
| ASTM D 5486/D 5486M-1999 |
包装、封箱和密封用压敏带的标准规范 |
Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| ASTM D 5487-1998 |
冲击试验机测定加载容器模拟跌落的标准试验方法 |
Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
| ASTM D 5488-1994 |
包装材料和包装件环境标记的标准术语 |
Standard Terminology of Environmental Labeling of Packaging Materials and Packages |
| ASTM D 5489-2001 |
纺织品提示标签用提示符号的标准指南 |
Standard Guide for Care Symbols for Care Instructions on Textile Products |
| ASTM D 5490-1993 |
地下水流型模拟与现场信息比较的标准导则 |
Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information |
| ASTM D 5491-1998 |
模塑和挤制材料用再生聚乙烯薄膜原料的标准分类 |
Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials |
| ASTM D 5492-1998 |
丙烯塑料中二甲苯可溶物标准试验方法 |
Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
| ASTM D 5493-1993 |
载荷下土工织物介电常数标准试验方法 |
Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM D 5494-1993 |
未保护和保护土木薄膜角锥穿孔强度的标准试验方法 |
Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 5495-1994 |
混合废液抽样器抽样标准规程(COLIWASA) |
Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA) |
| ASTM D 5496-1998 |
土工合成织物现场浸渍试验标准操作规程 |
Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 5497-1994 |
钮扣术语 |
Standard Terminology Relating to Buttons |
| ASTM D 5498-2001 |
核设施喷涂工作检验人员培训计划编制标准指南 |
Standard Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities |
| ASTM D 5499-1994 |
烟道废气脱硫系统聚合物衬里耐性能热标准试验方法 |
Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 5500-1998 |
进液阀门沉积形成的不含铅自动火花点火引擎燃料的车辆评价标准试验方法 |
Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 5501-1994 |
气相色谱法测定变性燃料酒精中酒精含量的标准试验方法 |
Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography |
| ASTM D 5502-2000 |
通过铝工业生产的阳极和阴极碳物理测量确定表观密度的标准试验方法 |
Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| ASTM D 5503-1994 |
管道仪表的天然气抽样处理和调节系统标准规程 |
Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation |
| ASTM D 5504-1998 |
用气相色谱和化学发光法测定天然气和气体燃料中硫化物含量的标准试验方法 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 5505-1997 |
再循环乳化剂分类标准操作规程 |
Standard Practice for Classifying Emulsified Recycling Agents |
| ASTM D 5506-1998 |
沥青路面材料试验和检查人员资格认证组织的标准操作规程 |
Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials |
| ASTM D 5507-1999 |
毛细管柱/多维气相色谱法测定单体级氯乙烯中微量有机杂质的标准试验方法 |
Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography |
| ASTM D 5508-1994 |
液面上毛细管气相色谱法测定苯乙烯-丙烯腈共聚物树脂和腈-丁二烯橡胶中残留丙烯腈单体的标准试验方法 |
Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC) |
| ASTM D 5509-1996 |
模拟合成环境中塑料的标准规范 |
Standard Practice for Exposing Plastics to a Simulated Compost Environment |
| ASTM D 5510-1994 |
氧化降解塑料热老化标准规范 |
Standard Practice for Heat Aging of Oxidatively Degradable Plastics |
| ASTM D 5511-1994 |
强硬度颗粒厌氧溶解条件下测定塑性材料厌氧生物降解的标准试验方法 |
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM D 5512-1996 |
用外部加热反应器将塑料暴露在模拟合成环境中的标准规范 |
Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor |
| ASTM D 5513-1999 |
痕量素分析用工业炉供入液流的微波溶解标准操作规范 |
Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams for Trace Element Analysis |
| ASTM D 5514-1994 |
土工合成织物的大规模静水压冲孔试验标准试验方法 |
Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 5515-1997 |
用膨胀计测定烟煤膨胀特性的标准试验方法 |
Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer |
| ASTM D 5516-2001 |
在高温下阻燃处理的软木胶合板挠性特性评定的标准试验方法 |
Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures |
| ASTM D 5516a-2001 |
在高温下阻燃处理的软木胶合板挠性特性评定的标准试验方法 |
Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures |
| ASTM D 5517-1996 |
工美材料中金属淬取性测定的标准试验方法 |
Standard Test Method for Determining Extractability of Metals from Art Materials |
| ASTM D 5518-1994 |
为确定历史遗迹而获得航空摄影和成象文件的标准指南用途和地面条件 |
Standard Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions |
| ASTM D 5519-1994 |
天然和人工粗石材料粒度分析标准试验方法 |
Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials |
| ASTM D 5520-1994 |
单轴压缩法实验室测定冻结土壤样品蠕变性能的标准试验方法 |
Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression |
| ASTM D 5521-1994 |
颗粒蓄水层中地下水监控井开发的标准指南 |
Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers |
| ASTM D 5522-1999 |
土壤、岩石和封闭流体化学分析实验室最低要求标准规范 |
Standard Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid |
| ASTM D 5523-1994 |
单体芳香异氰酸酯中水解氯银量滴定法测定聚氨酯原料酸度的标准试验方法 |
Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
| ASTM D 5524-1994 |
用液体色谱法测定高密度聚乙烯中酚抗氧化剂的标准试验方法 |
Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography |
| ASTM D 5525-1994 |
塑料在模拟有效着陆环境中暴露的标准规范 |
Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment |
| ASTM D 5526-1994 |
加速土地填筑条件下塑料材料的厌氧生物降解测定的标准试验方法 |
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions |
| ASTM D 5527-1994 |
用声学方法测量表面风和温度的标准规范 |
Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 5528-2001 |
单向纤维增强聚合母体复合材料I型层间断裂韧性的标准试验方法 |
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 5530-1994 |
用Karl Fischer滴定法测定有害废油总水份的标准试验方法 |
Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry |
| ASTM D 5531-1994 |
涂层颜色和几何外观实物产品标准的制作、维护和分发的标准导则 |
Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM D 5532-1994 |
油漆用云母状铁氧颜料的标准规范 |
Standard Specification for Micaceous Iron Oxide Pigments for Paint |
| ASTM D 5533-1998 |
评价IIIE排列下火花点燃式发动机中汽车发动机油的标准试验方法 |
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine |
| ASTM D 5534-1994 |
液压液体汽相防锈性能的标准试验方法 |
Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
| ASTM D 5535-1998 |
用于路面接合和裂纹的成形密封剂相关标准术语 |
Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements |
| ASTM D 5536-1994 |
无节疤木材性能测定用林材树取样的标准规范 |
Standard Practice for Sampling Forest Trees for rmination of Clear Wood Properties |
| ASTM D 5537-1998 |
电缆或光缆的绝缘材料在立式电缆槽结构中燃烧时热释放,火焰扩散和质量损失试验的标准试验方法 |
Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ASTM D 5538-1998 |
热塑性弹性体术语和缩写的标准规范 |
Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations |
| ASTM D 5539-1994 |
种子初始混合标准规范 |
Standard Specification for Seed Starter Mix |
| ASTM D 5540-1994 |
用于在线水取样和分析的流量和温度控制标准规范 |
Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis |
| ASTM D 5541-1994 |
明渠流量阶段排水关系确定的标准规范 |
Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow |
| ASTM D 5542-1994 |
离子色谱法分析高纯度水中痕量阴离子的标准试验方法 |
Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography |
| ASTM D 5543-1994 |
水中低水平溶解氧的标准试验方法 |
Standard Test Methods for Low-Level Dissolved Oxygen in Water |
| ASTM D 5544-1994 |
高纯度水蒸发后残留物在线测量的标准试验方法 |
Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
| ASTM D 5545-1994 |
阳离子慢固乳化地沥青识别的标准试验方法 |
Standard Test Method for Identification of Cationic Slow-Set Emulsified Asphalts |
| ASTM D 5546-2001 |
离心法测定甲苯中沥青胶粘剂溶解度的标准试验方法 |
Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge |
| ASTM D 5547-1995 |
原子吸收法测定粉未洗涤剂中的粘土和沸石的标准试验方法 |
Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption |
| ASTM D 5548-1999 |
洗涤中染色织物颜色转移或颜色损失评定的标准导则 |
Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering |
| ASTM D 5549-1994 |
土工统计现场研究内容的标准导则 |
Standard Guide for Content of Geostatistical Site Investigations |
| ASTM D 555-1984 |
干性油试验 |
Testing Drying Oils |
| ASTM D 5550-1994 |
用气体比重瓶法测定土壤固体粒子比重的标准试验方法 |
Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
| ASTM D 5551-1995 |
油始凝点测定的标准试验方法 |
Standard Test Method for Determination of the Cloud Point of Oil |
| ASTM D 5552-1994 |
有色皮革耐印流性能的标准试验方法 |
Standard Test Method for Resistance of Colored Leather to Bleeding |
| ASTM D 5553-1995 |
硫酸化油中不皂化非挥发性物质测定的标准试验方法 |
Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils |
| ASTM D 5554-1995 |
脂肪和油中碘值测定的标准试验方法 |
Standard Test Method for Determination of the Iodine Value of Fats and Oils |
| ASTM D 5555-1995 |
脂肪水溶液和加脂化合物中使用的动物、海生动物及植物性脂肪和油所含游离脂肪酸测定的标准试验方法 |
Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds |
| ASTM D 5556-1995 |
脂肪水溶液和加脂化合物中使用的脂肪和油中所含水份及其它挥发性物质测定的标准试验方法 |
Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds |
| ASTM D 5557-1995 |
脂肪水溶液和加脂化合物中使用的脂肪和油所含不溶性杂质测定的标准试验方法 |
Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds |
| ASTM D 5558-1995 |
测定脂肪和油碱化值的标准试验方法 |
Standard Test Method for Determination of the Saponification Value of Fats and Oils |
| ASTM D 5559-1995 |
磺酸化或硫酸化油中不存在铵或三乙醇胺皂时酸度作为游离脂肪酸/酸值测定的标准试验方法 |
Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils |
| ASTM D 5560-1995 |
脂肪和油中所含中性脂肪物质测定的标准试验方法 |
Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils |
| ASTM D 5562-1995 |
存在铵或三乙醇胺皂时酸度作为游离脂肪酸值测定的标准试验方法 |
Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps |
| ASTM D 5564-1995 |
硫酸化或磺酸化油中总氨含量测定的标准试验方法 |
Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils |
| ASTM D 5565-1995 |
测定动物、海洋动物和植物脂肪和油中脂肪酸凝固点的标准试验方法 |
Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils |
| ASTM D 5566-1995 |
硫酸化油和磺酸化油的无机盐含量测定的标准试验方法 |
Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils |
| ASTM D 5567-1994 |
土壤土工合成织物系统液力传导比(CHR)标准试验方法 |
Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 5568-1995 |
微波频率下固体材料相对复介电常数和磁导率测量标准试验方法 |
Standard Test Method for Measuring Relative Complex Permittivity and Magnetic Permeability of Solid Materials at Microwave Frequencies |
| ASTM D 5569-1994 |
护套加热件用电级氧化镁静流测定用标准试验方法 |
剚Standard Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements |
| ASTM D 5570-1994 |
用作外壳密封的胶带和胶粘剂耐水性标准试验方法 |
Standard Test Method for Water Resistance of Tape and Adhesives Used as a Box Closure |
| ASTM D 5571-1994 |
额定容量不超过60加仑(227公升)的塑料密封头圆筒的耐环境应力裂开(ESCR)的标准试验方法 |
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity |
| ASTM D 5572-1995 |
非结构木材制品中指形接合用胶粘剂的标准规范 |
Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM D 5573-1999 |
纤维增强塑料(FRP)接合中失效方式分类的标准操作规程 |
Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM D 5574-1994 |
确定结构连接设计用木材胶粘剂允许机械性能的标准试验方法 |
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 5575-1999 |
亚乙烯氟化物与其它氟化物单体的共聚物标准规范 |
Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| ASTM D 5576-2000 |
用付里叶变换红外光谱(FT-IR)法测定聚烯烃和聚烯烃共聚物结构实体的标准实施规程 |
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR) |
| ASTM D 5577-1994 |
再生塑料中污染物分离及鉴别技术的标准导则 |
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| ASTM D 5578-1994 |
工作场所空气中环氧乙烯测定的标准试验方法 |
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com