标准号 |
中文名称 |
英文名称 |
ASTM D 4124-2001 |
沥青分离为四种馏分的标准试验方法 |
Standard Test Methods for Separation of Asphalt into Four Fractions |
ASTM D 4125-1994 |
用核子法测定沥青混合料中沥青含量的方法 |
Test Method for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
ASTM D 4126-2000 |
蒸气脱脂级和普通溶剂级1,1,1-三氯乙烷的标准规范 |
Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
ASTM D 4127-1992 |
离子选择电极用术语 |
Terminology Used with Ion-Selective Electrodes |
ASTM D 4128-1994 |
用综合气体色层分离法和电子冲击光谱法鉴别水中有机化合物的规程 |
Identification of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry |
ASTM D 4129-1998 |
用高温氧化法及库仑检测法对水中总碳量和有机碳含量的试验方法 |
Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection |
ASTM D 413-1998 |
橡胶特性的试验方法-与软质基底的粘附性 |
Test Methods for Rubber Property - Adhesion to Flexible Substrate |
ASTM D 4130-1999 |
微咸水、海水和盐水中硫酸盐离子的试验方法 |
Test Method for Sulfate Ion in Brackish Water, Seawater and Brines |
ASTM D 4131-1984 |
用鱼藤铜采集鱼样的方法 |
Sampling Fish with Rotenone |
ASTM D 4132-1982 |
用圆锥拖网采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with Conical Tow Nets |
ASTM D 4133-1982 |
用泵采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with Pumps |
ASTM D 4134-1982 |
用克拉克-邦普斯浮游生物采样器采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler |
ASTM D 4135-1982 |
用深度综合采样器采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with Depth-Integrating Samplers |
ASTM D 4136-1982 |
用水样瓶采集可繁殖海洋浮游生物 |
Sampling Phytoplankton with Water-Sampling Bottles |
ASTM D 4137-1982 |
可繁殖海洋浮游生物样品的保存 |
Preserving Phytoplankton Samples |
ASTM D 4138-1994 |
破坏法测定防护涂料体系干膜厚度的方法 |
Test Method for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means |
ASTM D 4140-1982 |
干燥剂、干性油、松脂制品及溶剂的挥发物含量及不挥发物含量的测定方法 |
Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores and Solvents |
ASTM D 4141-2001 |
进行涂层黑箱和阳光集中暴露试验的标准实施规程 |
Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
ASTM D 4142-1989 |
环氧树脂的试验 |
Testing Epoxy Resins |
ASTM D 4143-1989 |
乳胶载色体剂的试验 |
Testing Latex Vehicles |
ASTM D 4144-1994 |
紫外线固化涂层包装耐久性估价方法 |
Estimating Package Stability of Coatings for Ultraviolet Curing |
ASTM D 4145-1983 |
预涂板涂层柔韧性试验方法 |
Test Method for Coating Flexibility of Prepainted Sheet |
ASTM D 4146-1996 |
钢材表面富锌底漆/铬酸盐复合涂层可成形性的试验方法 |
Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel |
ASTM D 4147-1999 |
线绕收缩用线圈涂层的适用规程 |
Applying Coil Coatings Using the Wire-Wound Drawdown Bar |
ASTM D 4148-1982 |
用Sedgwick-木筏法分析地表水中浮游生物的试验方法 |
Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method |
ASTM D 4149-1982 |
地表水中浮游生物取样分类 |
Classification for Sampling Phytoplankton in Surface Waters |
ASTM D 4150-2000 |
气体燃料的相关标准术语 |
Standard Terminology Relating to Gaseous Fuels |
ASTM D 4153-2001 |
男人、妇女和儿童用机织手帕织物的标准性能规范 |
Standard Performance Specification for Mens, Womens, and Childrens Woven Handkerchief Fabrics |
ASTM D 4154-2001 |
男人和男孩用针织和机织海滨服和运动衫织物的标准性能规范 |
Standard Performance Specification for Mens and Boys Knitted and Woven Beachwear and Sports Shirt Fabrics |
ASTM D 4155-2001 |
妇女和女孩用机织运动服装、短裤、宽松的长裤和套服织物的标准性能规范 |
Standard Performance Specification for Womens and Girls Woven Sportswear, Shorts, Slacks, and Suiting Fabrics |
ASTM D 4156-2001 |
妇女和女孩用针织运动服织物的标准性能规范 |
Standard Performance Specification for Womens and Girls Knitted Sportswear Fabrics |
ASTM D 4161-2001 |
使用挠性弹性体密封件的玻璃钢(玻璃纤维增强热固树脂)管接头标准规范 |
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
ASTM D 4164-1999 |
成型催化剂和催化剂载体的机械压实后堆集密度的标准试验方法 |
Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers |
ASTM D 4165-2000 |
水中氯化氰含量的标准试验方法 |
Standard Test Method for Cyanogen Chloride in Water |
ASTM D 4166-1999 |
用数字磁化强度测试仪测量非磁性材料厚度的方法 |
Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument |
ASTM D 4167-1997 |
纤维增强的塑料风扇和风机 |
Fiber-Reinforced Plastic Fans and Blowers |
ASTM D 4168-1995 |
泡沫衬垫材料传递冲击特性的试验方法 |
Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials |
ASTM D 4169-2001 |
运输集装箱和设备性能试验的标准实施规范 |
Standard Practice for Performance Testing of Shipping Containers and Systems |
ASTM D 4170-1997 |
润滑脂对微振磨损保护性的试验方法 |
Test Method for Fretting Wear Protection by Lubricating Greases |
ASTM D 4171-1998 |
燃料系统防冻剂规范 |
Fuel System Icing Inhibitors |
ASTM D 4172-1994 |
润滑液防磨损特性的试验方法(四球法) |
Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
ASTM D 4174-1989 |
石油液压装置的清理、冲洗及净化方法 |
Cleaning, Flushing and Purification of Petroleum Fluid Hydraulic Systems |
ASTM D 4175-2000 |
石油、石油产品和润滑剂的相关标准术语 |
Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants |
ASTM D 4176-1993 |
馏分燃料中游离水和颗粒杂质的试验方法 |
Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
ASTM D 4177-1995 |
石油和石油产品的自动抽样方法 |
Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4178-1982 |
湿度分析仪的标准 |
Calibrating Moisture Analyzers |
ASTM D 4179-2001 |
成型单粒催化剂压碎强度的标准试验方法 |
Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes |
ASTM D 418-1993 |
植绒绒毛地毯的测试方法 |
Test Methods for Tuft and Yarn Length of Uncoated Floor Coverings |
ASTM D 4180-1999 |
成型催化剂的振动存储密度的标准试验方法 |
Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers |
ASTM D 4181-1996 |
乙缩醛模塑和挤压料规范 |
Acetal (POM) Molding and Extrusion Materials |
ASTM D 4182-1997 |
煤和焦炭采样及分析的ASTM法实验室评定 |
Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke |
ASTM D 4185-1996 |
原子吸收分光光度法测定工作场所空气中金属的含量 |
Measurement of Metals in Workplace Atmosphere by Atomic Absorption Spectrophotometry |
ASTM D 4186-1989 |
用可控应变荷载对土壤的单向渗压性能的试验方法 |
Test Method for One-Dimensional Consolidation Properties of Soils Using Controlled-Strain Loading |
ASTM D 4188-1982 |
在线加压凝结-絮凝-过滤试验 |
Performing Pressure In-Line Coagulation-Flocculation-Filtration Test |
ASTM D 4189-1995 |
水的淤泥密度指数的试验方法 |
Test Method for Silt Density Index (SDI) of Water |
ASTM D 4190-1999 |
用直流氩等离子体原子辐射分光光度技术测定水中素的标准试验方法 |
Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy |
ASTM D 4191-1997 |
原子吸收分光光度法对水中钠含量的试验方法 |
Test Method for Sodium in Water by Atomic Absorption Spectrophotometry |
ASTM D 4192-1997 |
原子吸收分光光度法对水中钾含量的试验方法 |
Test Method for Potassium in Water by Atomic Absorption Spectrophotometry |
ASTM D 4193-1995 |
水中硫氰酸盐含量的试验方法 |
Test Method for Thiocyanate in Water |
ASTM D 4194-1995 |
反渗透装置的操作特性的试验方法 |
Test Methods for Operating Characteristics of Reverse Osmosis Devices |
ASTM D 4195-1988 |
反渗透设备用水质分析导则 |
Water Analysis for Reverse Osmosis Application |
ASTM D 4196-1982 |
确认膜过滤器的无菌性的试验方法 |
Test Method for Confirming the Sterility of Membrane Filters |
ASTM D 4198-1982 |
细菌分析和生长用的和膜过滤器一起使用的吸收性垫片的评价方法 |
Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth |
ASTM D 4199-1982 |
膜过滤器的可高压消毒性的试验方法 |
Test Methods for Autoclavability of Membrane Filters |
ASTM D 420-1998 |
土壤和岩石的研究和抽样 |
Investigating and Sampling Soil and Rock |
ASTM D 4200-1982 |
膜过滤器上油墨格栅的抑制作用的评价方法 |
Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters |
ASTM D 4201-1996 |
水中大肠菌噬体含量的试验方法 |
Test Method for Coliphages in Water |
ASTM D 4203-1995 |
苯乙烯-丙烯腈喷射和挤压材料 |
Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
ASTM D 4204-2000 |
循环研究用塑料薄膜样品制备的标准实施规程 |
Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study |
ASTM D 4205-1993 |
有关橡胶易燃性燃烧试验的规范 |
Flammability and Combustion Testing of Rubber and Rubber-Like Materials |
ASTM D 4206-1996 |
用Setaflash试验仪(开杯)对液体混合物持续燃烧的试验方法 |
Test Method for Sustained Burning of Liquid Mixtures by the Setaflash Apparatus (Open Cup) |
ASTM D 4208-1988 |
用氧弹燃烧/离子选择电极法对煤中总氯含量的试验方法 |
Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method |
ASTM D 4209-1982 |
纤维素、乳剂、树脂溶液、虫胶和清漆的挥发物和不挥发物含量测定方法 |
Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac and Varnishes |
ASTM D 421-1985 |
土壤粒度分析试验方法 |
Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants |
ASTM D 4210-1989 |
实验室间质量控制程序及对低标准数据报告的讨论 |
Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data |
ASTM D 4211-1982 |
鱼样的分类 |
Classification for Fish Sampling |
ASTM D 4212-1999 |
浸渍型粘度杯测定粘度的试验方法 |
Test Method for Viscosity by Dip-Type Viscosity Cups |
ASTM D 4213-1996 |
失重法测定内用涂料耐温磨性试验方法 |
Test Method for Wet Abrasion Resistance of Interior Paints |
ASTM D 4214-1998 |
外用漆膜粉化程度评价的试验方法 |
Test Methods for Evaluating Degree of Chalking of Exterior Paint Films |
ASTM D 4215-1996 |
冷拌冷铺的沥青铺面混合料 |
Cold-Mixed, Cold-Laid Bituminous Paving Mixture |
ASTM D 4216-2000 |
刚性聚氯乙烯(PVC)和相关聚氯乙烯(PVC)及氯化聚氯乙烯(CPVC)建筑制品化合物的标准规范 |
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds |
ASTM D 4217-1991 |
热固涂料粉的胶凝时间的试验方法 |
Test Method for Gel Time of Thermosetting Coating Powder |
ASTM D 4218-1996 |
用套炉技术测定聚乙烯化合物中碳黑含量的试验方法 |
Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique |
ASTM D 4219-1993 |
化学灌浆土壤的无侧限压缩强度指数试验的测试方法 |
Test Method for Unconfined Compressive Strength Index of Chemical-Grouted Soils |
ASTM D 422-1963 |
土壤粒度分析试验方法 |
Test Method for Particle-Size Analysis of Soils |
ASTM D 4220-1995 |
保存和运输土壤样品的规范 |
Preserving and Transporting Soil Samples |
ASTM D 4221-1999 |
用双倍流体比重计测定粘土的分散特性的试验方法 |
Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
ASTM D 4222-1998 |
静态体积测量法测定催化剂氮吸附和解附等温线的试验方法 |
Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts by Static Volumetric Measurements |
ASTM D 4223-1999 |
沥青固定土壤的试样制备的标准操作规程 |
Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
ASTM D 4225-1997 |
苯乙烯-丁二烯薄板 |
Styrene-Butadiene Sheeting |
ASTM D 4226-1999 |
刚性聚氯乙烯建筑制品的耐冲击性的标准试验方法 |
Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products |
ASTM D 4227-1999 |
核设施安全相关地区混凝土表面涂层涂刷油漆工的资格鉴定 |
Qualification of Journeyman Painters for Application of Coatings to Concrete Surfaces of Safety-Related Areas in Nuclear Facilities |
ASTM D 4228-1999 |
核设施安全相关地区钢表面涂层涂刷油漆工的资格鉴定 |
Qualification of Journeyman Painters for Application of Coatings to Steel Surfaces of Safety-Related Areas in Nuclear Facilities |
ASTM D 4230-1983 |
用冷却表面冷凝(露点)湿度计测量湿度的方法 |
Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
ASTM D 4231-2001 |
可洗涤机织衬衫和运动衫评定的标准实施规范 |
Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts |
ASTM D 4232-2001 |
男人和妇女用服装及职业工作人员工作服织物的标准性能规范 |
Standard Performance Specification for Mens and Womens Dress and Vocational Career Apparel Fabrics |
ASTM D 4233-2001 |
妇女和女孩用针织和机织胸罩织物的标准性能规范 |
Standard Performance Specification for Womens and Girls Knitted and Woven Brassiere Fabrics |
ASTM D 4234-2001 |
妇女和女孩用针织浴衣、便服、长睡衣、睡衣、长衬裙和女内衣织物的标准性能规范 |
Standard Performance Specification for Womens and Girls Knitted Robe, Negligee, Nightgown, Pajama, Slip, and Lingerie Fabrics |
ASTM D 4235-2001 |
妇女和女孩用针织女衬衫和服装织物标准性能规范 |
Standard Performance Specification for Womens and Girls Knitted Blouse and Dress Fabrics |
ASTM D 4236-1994 |
慢性危害健康的工艺材料的标志方法 |
Labeling Art Materials for Chronic Health Hazards |
ASTM D 4237-1990 |
蒸汽设备用橡胶软管的试验方法 |
Test Methods for Rubber Hose Used for Steam Applications |
ASTM D 4239-2000 |
高温管式炉燃烧法分析煤和焦炭分析样品中硫含量的标准试验方法 |
Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods |
ASTM D 4241-1998 |
气体涡轮发电机润滑油系统的设计 |
Design of Gas Turbine Generator Lubricating Oil Systems |
ASTM D 4242-2001 |
热固涂料粉倾斜板流量的标准试验方法 |
Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders |
ASTM D 4243-1999 |
新的和老化的电绝缘纸和纸板聚合作用的平均粘滞程度的测量 |
Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards |
ASTM D 4244-1995 |
电线及电缆用普通,重型及超重型丙烯腈-丁二烯/聚氯乙烯套管的规格 |
General-Purpose, Heavy-Duty and Extra-Heavy-Duty Acrylonitrile -Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable |
ASTM D 4245-1997 |
在干90℃/湿75℃条件下使用的电线和电缆的耐臭氧热塑性弹性体绝缘 |
Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 Degrees C Dry/ 75 Degrees C Wet Operation |
ASTM D 4246-1997 |
在90℃时使用的电线和电缆的耐臭氧热塑性弹性体绝缘 |
Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 Degrees C Operation |
ASTM D 4247-1999 |
一般用途电线和电缆用黑色重型和超重型氯丁橡胶套管 |
General-Purpose, Black Heavy-Duty and Black Extra-Heavy-Duty Polychloroprene Jackets for Wire and Cable |
ASTM D 4248-1998 |
蒸气涡轮发电机供油系统的设计 |
Design of Steam Turbine Generator Oil Systems |
ASTM D 4249-1983 |
水中白色念球菌计数的试验方法 |
Standard Test Method for Enumeration of Candida albicans in Water |
ASTM D 425-1988 |
土壤离心湿度当量试验方法 |
Test Method for Centrifuge Moisture Equivalent of Soils |
ASTM D 4250-1992 |
吸水纤维制品蓄水能力的试验方法 |
Test Method for Water-Holding Capacity of Bibulous Fibrous Products |
ASTM D 4251-1989 |
用电势滴定法对阴离子表面活性剂中活性物质含量的试验方法 |
Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
ASTM D 4252-1989 |
乙氧基乙醇和乙氧基烷基酚的化学分析方法 |
Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
ASTM D 4253-2000 |
使用振动台测定土壤最大标准密度和单位重量的标准试验方法 |
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
ASTM D 4254-2000 |
土壤最低标准密度和单位重量的标准试验方法与相对密度的计算 |
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
ASTM D 4255-1983 |
复合叠层板材的平面内剪切特性的试验 |
Testing Inplane Shear Properties of Composite Laminates |
ASTM D 4255/D 4255M-2001 |
轨道剪切法测定聚合母体组合材料平面剪切特性的标准试验方法 |
Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
ASTM D 4258-1983 |
混凝土涂覆前表面的清洁处理 |
Surface Cleaning Concrete for Coating |