标准号 |
中文名称 |
英文名称 |
| ASTM D 3989-2001 |
EDTA法涂料催干剂中稀土金属总量的标准试验方法 |
Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method |
| ASTM D 3990-1999 |
纺织品缺陷的相关术语 |
Terminology Relating to Fabric Defects |
| ASTM D 3991-1994 |
羊毛和马海毛细度的分级 |
Fineness of Wool or Mohair and Assignment of Grade |
| ASTM D 3992-1994 |
顶级羊毛和马海毛细度的分级 |
Fineness of Wool Top or Mohair Top and Assignment of Grade |
| ASTM D 3994-1995 |
男人,妇女及女孩用游泳衣织物性能规格 |
Performance Specification for Woven Swimwear Fabrics |
| ASTM D 3995-1995 |
男人及妇女用针织职员工作服织物的性能规格 |
Performance Specification for Mens and Womens Knitted Career Apparel Fabrics: Dress and Vocational |
| ASTM D 3996-1995 |
针织泳装的性能规格 |
Performance Specification for Knit Swimwear Fabrics |
| ASTM D 3997-1997 |
焦炭抽样制备的反光显微镜分析 |
Preparing Coke Samples for Microscopical Analysis by Reflected Light |
| ASTM D 3999-1991 |
用循环三轴器确定土壤的阻尼特性和系数的试验方法 |
Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus |
| ASTM D 4-1986 |
沥青含量试验方法 |
Test Method for Bitumen Content |
| ASTM D 4000-2001 |
指定塑料材料的标准分类系统 |
Standard Classification System for Specifying Plastic Materials |
| ASTM D 4000a-2001 |
规范塑料材料的标准分类体系 |
Standard Classification System for Specifying Plastic Materials |
| ASTM D 4001-1993 |
用低扩散法测量聚合物的平均分子量的规程 |
Determination of Weight-Average Molecular Weight of Polymers by Light Scattering |
| ASTM D 4002-1981 |
使皮面柔软鞋油的评定 |
Evaluation of Buffable Shoe Polish |
| ASTM D 4003-1998 |
船运集装箱及系统可程控的水平冲击试验的试验方法 |
Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
| ASTM D 4004-1993 |
橡胶.用火焰原子吸收法测定橡胶中金属含量的试验方法 |
Test Methods for Rubber - Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
| ASTM D 4005-1992 |
塑料涂覆织物.聚氯乙烯弥散涂层的溶解度的试验方法 |
Test Method for Plastic-Coated Fabrics - Completeness of Fusion of PVC Dispersion Coatings |
| ASTM D 4006-1981 |
蒸馏法测定原油中水的试验方法 |
Test Method for Water in Crude Oil by Distillation |
| ASTM D 4007-1981 |
离心法测定原油中水和沉积物的试验方法 |
Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 4008-1995 |
测量洗衣用洗涤剂防污物沉积性的方法(不适于洗涤剂的分级) |
Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for Detergent Ranking) |
| ASTM D 4009-1992 |
人工洗碗用洗涤剂泡沫的稳定性 |
Foam Stability of Hand Dishwashing Detergents |
| ASTM D 4010-1983 |
无水人工清洗器 |
Waterless Hand Cleaner |
| ASTM D 4012-1981 |
水中微生物的三磷酸腺甙含量的试验方法 |
Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water |
| ASTM D 4013-1998 |
用回旋剪切压实器制备沥青混合物试样 |
Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor |
| ASTM D 4014-1989 |
桥梁用滑动轴承和钢制叠层弹性轴承的规格 |
Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 4015-1992 |
用共振柱法测定土壤的模量和阻尼因数的试验方法 |
Test Methods for Modulus and Damping of Soils by the Resonant-Column Method |
| ASTM D 4016-1993 |
用BROOKFIELD粒度计测定化学灌浆粘度的试验方法(实验室法) |
Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method) |
| ASTM D 4017-2002 |
卡尔·费舍尔法测定涂料及相关物质中水份的标准试验方法 |
Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 4018-1999 |
碳及石墨纤维束的连续长丝抗拉特性的标准试验方法 |
Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
| ASTM D 4019-1994 |
用电量计测定塑料中水份的试验方法 |
Test Method for Moisture in Plastics by Coulometry |
| ASTM D 402-1997 |
稀释沥青产品的蒸馏试验方法 |
Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products |
| ASTM D 4020-2000 |
超高分子量聚乙烯模压及挤压物料的标准规范 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials |
| ASTM D 4020a-2001 |
超高分子量聚乙烯模压及挤制材料的标准规范 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials |
| ASTM D 4022-1994 |
煤柏油屋面粘结剂 |
Coal Tar Roof Cement |
| ASTM D 4023-1982 |
湿度测量的相关标准术语 |
Standard Terminology Relating to Humidity Measurements |
| ASTM D 4024-2000 |
机制纤维玻璃(玻璃纤维增强的热固性树脂)法兰的标准规范 |
Standard Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 4025-1997 |
报告地下喷射的水中沉积物的检验和分析结果的规程 |
Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection |
| ASTM D 4026-1987 |
橡胶胶乳试验方法.苯乙烯丁二烯共聚物.残留苯乙烯的测定 |
Test Method for Rubber Latex - Styrene-Butadiene Copolymer - Determination of Residual Styrene |
| ASTM D 4027-1998 |
用变形钢轨试验测定结构胶粘剂的剪切特性的试验方法 |
Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 4028-1996 |
涂乙烯的纤维玻璃纱编的日光罩的标准规范 |
Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
| ASTM D 4029-1997 |
精整机织玻璃织物 |
Finished Woven Glass Fabrics |
| ASTM D 4030-1999 |
玻璃纤维绳和缝纫线规格 |
Glass Fiber Cord and Sewing Thread |
| ASTM D 4031-2001 |
膨松纱线膨松特性的标准试验方法 |
Standard Test Method for Bulk Properties of Textured Yarns |
| ASTM D 4032-1994 |
用圆形弯曲法测定织物挺度的试验方法 |
Test Method for Stiffness of Fabric by the Circular Bend Procedure |
| ASTM D 4035-1995 |
针织领带和围巾织物的性能规格 |
Performance Specification for Knitted Necktie and Scarf Fabrics |
| ASTM D 4037-1995 |
机织,针织或植绒床单织物的性能规格 |
Performance Specification for Woven, Knitted or Flocked Bedspread Fabrics |
| ASTM D 4038-1995 |
妇女及女孩用机织服装和衬衫织物的性能规格 |
Performance Specification for Womens and Girls Woven Dress and Blouse Fabrics |
| ASTM D 4039-1993 |
高光泽表面反射光雾的试验方法 |
Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 4040-1999 |
落杆粘度计测定印刷油墨及漆料粘度的试验方法 |
Test Method for Viscosity of Printing Inks and Vehicles by the Falling-Rod Viscometer |
| ASTM D 4041-1997 |
测定人力操纵的泵分送器的喷射模式的试验方法 |
Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers |
| ASTM D 4042-1993 |
轨钢厂悬浮的轧制油中粉尘及总铁的取样及试验规程 |
Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
| ASTM D 4043-1996 |
用水井技术测定水力特性的水层试验方法中的选择 |
Selection of Aquifer-Test Method in Determining of Hydraulic Properties by Well Techniques |
| ASTM D 4044-1996 |
测定蓄水层水力特性用水头)(水压)抑瞬时变化(栓塞试验)的试验方法 |
Test Method for (Field Procedure) for Instantaneous Change in Head (Slug Tests) for Determining Hydraulic Properties of Aquifiers |
| ASTM D 4045-1999 |
利用氢解作用和速率计的色度术测试石油产品中的硫 |
Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 4046-1991 |
分光光度法测定柴油燃料中硝酸烷基酯的试验方法 |
Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry |
| ASTM D 4047-1991 |
喹啉磷钼酸盐法测定润滑油和添加剂中磷的试验方法 |
Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method |
| ASTM D 4048-1997 |
铜条锈蚀试验法检测润滑脂腐蚀的试验方法 |
Test Method for Detection of Copper Corrosion from Lubricating Grease |
| ASTM D 4049-1999 |
测定润滑脂耐水喷射性的试验方法 |
Test Method for Determining the Resistance of Lubricating Grease to Water Spray |
| ASTM D 4050-1996 |
蓄水系统水力特性测定用排出和注射井的试验方法(现场程序) |
Test Method (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems |
| ASTM D 4051-1999 |
低压气体混合物的制备 |
Preparation of Low-Pressure Gas Blends |
| ASTM D 4052-1996 |
数字密度计测定密度和液体相对密度的试验方法 |
Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 4053-1998 |
红外光谱法测定车用和航空汽油中苯的试验方法 |
Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy |
| ASTM D 4054-1993 |
添加剂与航空涡轮机燃料和飞机燃烧体系材料相容性的评价 |
Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials |
| ASTM D 4055-1997 |
隔膜过滤法测定戊烷不溶物的试验方法 |
Test Method for Pentane Insolubles by Membrane Filtration |
| ASTM D 4056-2001 |
评定水在烃和脂肪酯润滑剂中溶解度的标准试验方法 |
Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants |
| ASTM D 4057-1995 |
石油和石油产品的手工抽样 |
Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4058-1996 |
催化剂及载体磨耗性的试验方法 |
Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
| ASTM D 4059-1996 |
气相色谱法分析无机绝缘油中多氯联苯含量的试验方法 |
Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography |
| ASTM D 4060-2001 |
用泰伯尔磨蚀机测定有机涂层耐磨性的标准试验方法 |
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4061-1994 |
平面涂层比发光度试验方法 |
Test Method for Retroreflectance of Horizontal Coatings |
| ASTM D 4062-1999 |
牵伸法测定涂料平整性的试验方法 |
Test Method for Leveling of Paints by Draw-Down Method |
| ASTM D 4063-1999 |
电绝缘板 |
Electrical Insulating Board |
| ASTM D 4064-2001 |
热加工的多用电杆的防腐处理标准实施规程 |
Standard Practice for Preservative Treatment of Utility Poles by the Thermal Process |
| ASTM D 4065-1995 |
测量及报告塑料的动态机械特性的规程 |
Determining and Reporting Dynamic Mechanical Properties of Plastics |
| ASTM D 4066-2001 |
尼龙注入及挤压材料的标准分类系统 |
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| ASTM D 4066a-2001 |
尼龙注射及挤压材料的标准分类体系 |
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| ASTM D 4067-1996 |
增强和填充的硫化聚苯喷注模塑和挤压物料的规格 |
Reinforced and Filled Polyphenylene Sulfide (PPS) Injection Molding and Extrusion Materials |
| ASTM D 4068-2001 |
隐蔽水容器隔膜用氯化聚乙烯薄片的标准规范 |
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
| ASTM D 4069-1995 |
从气流中除去气态放射性碘用的浸渍活性炭的规程 |
Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams |
| ASTM D 4070-1991 |
混凝土结构用预制弹性桥梁压缩填缝料安装用粘结剂 |
Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures |
| ASTM D 4071-1984 |
硅酸盐水泥混凝土桥面防水膜的使用规程 |
Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems |
| ASTM D 4072-1998 |
测定焦油和硬沥青中甲苯不溶物质(TI)含量的标准试验方法 |
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
| ASTM D 4073-1994 |
沥青铺层薄膜的抗撕裂强度的测试方法 |
Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes |
| ASTM D 4074-1991 |
屋面样品中沥青集料混合料的沥青及集料含量的试验方法 |
Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures from Roofing Samples |
| ASTM D 4075-1987 |
配料试验方法.火焰原子吸收技术.金属含量的测定 |
Test Methods for Compounding Materials - Flame Atomic Absorption Technique - Determination of Metals |
| ASTM D 4077-1996 |
异丙苯(异丙基苯) |
Isopropylbenzene (Cumene) |
| ASTM D 4078-1992 |
水乳化地板擦亮剂 |
Water Emulsion Floor Polish |
| ASTM D 4079-2000 |
蒸汽脱脂级亚甲基氯的标准规范 |
Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM D 4080-1996 |
工业用蒸气脱脂级三氯乙烯 |
Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 4081-2000 |
干洗剂的标准规范.全氯乙烷级 |
Standard Specification for Drycleaning-Grade Perchloroethylene |
| ASTM D 4082-1995 |
Υ射线对轻水核电站用涂层的影响的试验方法 |
Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants |
| ASTM D 4083-1989 |
冻土的描述(人工目测法) |
Description of Frozen Soils (Visual-Manual Procedure) |
| ASTM D 4084-1994 |
气体燃料中硫化氢的分析方法(乙酸铅反应速率法) |
Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 4085-1993 |
原子吸收分光光度计对纤维素中金属的试验方法 |
Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
| ASTM D 4086-1992 |
位变异构的目光鉴定 |
Visual Evaluation of Metamerism |
| ASTM D 4088-1982 |
固体电绝缘材料的装运准备 |
Preparation for Shipment of Solid Electrical Insulating Materials |
| ASTM D 409-1997 |
粉碎机法测定煤炭可磨性的试验方法 |
Test Method for Grindability of Coal by the Hardgrove-Machine Method |
| ASTM D 4092-1996 |
与塑料动力机械测量相关的术语 |
Terminology Relating to Dynamic Mechanical Measurements on Plastics |
| ASTM D 4093-1995 |
透明或半透明塑性材料中双折射及残余应变的光弹性量度的试验方法 |
Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials |
| ASTM D 4094-1997 |
乙烯-丙烯酸酸性共聚物的酸含量的试验方法 |
Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers |
| ASTM D 4095-1997 |
测定地板擦亮剂中的不挥发物质(总的固体物质)用折射计的使用规程 |
Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes |
| ASTM D 4096-1991 |
空气中悬浮粒子的测定方法(大容器取样器法) |
Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High Volume Sampler Method) |
| ASTM D 4097-2001 |
接触模压的玻璃纤维增强热固树脂耐腐蚀罐标准规范 |
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 41-1994 |
铺屋面、防潮及防水用沥青底层 |
Asphalt Primer Used in Roofing, Dampproofing and Waterproofing |
| ASTM D 4109-1995 |
男人及男孩用机织劳动布工作服、工装裤及车间涂层织物的性能规范 |
Performance Specification for Mens and Boys Woven Coverall, Dungaree, Overall and Shop-Coat Fabrics |
| ASTM D 411-1998 |
电绝缘试验用紫胶片 |
Shellac Used for Electrical Insulation Testing |
| ASTM D 4110-1995 |
男人及男孩用针织双面衣、晨衣及睡衣织物的性能规范 |
Performance Specification for Mens and Boys Knitted Bathrobe, Dressing Gown and Pajama Fabrics |
| ASTM D 4111-1995 |
家用及公共设施用机织餐巾和台布织物的性能规范 |
Performance Specification for Woven Napery and Tablecloth Fabrics: Household and Institutional |
| ASTM D 4112-1995 |
机织伞布织物的性能规范 |
Performance Specification for Woven Umbrella Fabrics |
| ASTM D 4113-1995 |
机织家具套织物的性能规范 |
Performance Specification for Woven Slipcover Fabrics |
| ASTM D 4114-1995 |
妇女及女孩衣服用机织平面衬里织物的性能规范 |
Performance Specification for Woven Flat Lining Fabrics for Womens and Girls Apparel |
| ASTM D 4115-1995 |
妇女及女孩用针织和机织服装、手套织物的性能规范 |
Performance Specification for Womens and Girls Knitted and Woven Dress Glove Fabrics |
| ASTM D 4116-2001 |
妇女及女孩用针织和机织紧身束腰胸衣织物的标准性能规范 |
Standard Performance Specification for Womens and Girls Knitted and Woven Corset-Girdle-Combination Fabrics |
| ASTM D 4117-2001 |
妇女及女孩用机织浴衣、长睡衣、睡衣、长衬裙、带肩带长内衣和内衣织物的标准性能规范 |
Standard Performance Specification for Womens and Girls Woven Robe, Negligee, Nightgown, Pajama, Slip, and Lingerie Fabrics |
| ASTM D 4118-2001 |
妇女用机织工作服、劳动布、工装裤及车间涂层织物的标准性能规范 |
Standard Performance Specification for Womens Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics |
| ASTM D 4119-2001 |
男人及男孩用针织衬衫织物的标准性能规范 |
Standard Performance Specification for Mens and Boys Knitted Dress Shirt Fabrics |
| ASTM D 412-1998 |
硫化橡胶、热塑橡胶和热塑合成橡胶的拉伸试验方法 |
Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers - Tension |
| ASTM D 4120-2001 |
粗纱、梳条和毛条中纤维内聚力动态试验的标准试验方法 |
Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests |
| ASTM D 4122-1996 |
碳黑.工业标准碳黑的评定 |
Carbon Black - Evaluation of an Industry Reference Black |
| ASTM D 4123-1982 |
沥青混合料的弹性模量间接拉力试验方法 |
Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com