标准号 |
中文名称 |
英文名称 |
| ASTM D 6283-1998 |
非包覆的起绒人造丝地板覆盖物成簇单位长度的标准试验方法 |
Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings |
| ASTM D 6284-1998 |
可溶于氯和氯胺液态溶剂的橡胶性能-效果的标准试验方法 |
Standard Test Method for Rubber Property-Effect of Aqueous Solutons with Available Chlorine and Chloramine |
| ASTM D 6285-1998 |
定位废弃井的标准指南 |
Standard Guide for Locating Abandoned Wells |
| ASTM D 6286-1998 |
环境位点特性分析用钻削方法选择的标准指南 |
Standard Guide for Selection of Drilling Methods for Environmental Site Characterization |
| ASTM D 6287-1998 |
切片和压片试验样品的标准操作规程 |
Standard Practice for Cutting Film and Sheeting Test Specimens |
| ASTM D 6288-1998 |
试验前回收塑料的清洗和分离的标准操作规程 |
Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
| ASTM D 6289-1998 |
测量由模制热固塑料的模型尺寸收缩的标准试验方法 |
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ASTM D 629-1999 |
纺织品定量分析试验方法 |
Test Methods for Quantitative Analysis of Textiles |
| ASTM D 6290-1998 |
塑料小丸颜色测定的标准试验方法 |
Standard Test Method for Color Determination of Plastic Pellets |
| ASTM D 6293-1998 |
用气相色谱对低烯烃火花点火引擎燃料芳香碳氢化合物类型,环烃,烯烃,石蜡和氧化物的标准试验方法 |
Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography |
| ASTM D 6294-1998 |
用于屋顶和防水屋顶的铁金属紧固件组件的耐腐蚀性的标准试验方法 |
Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing |
| ASTM D 6295/D 6295M-1998 |
轻载压敏膜带的非必需性的标准试验方法 |
Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
| ASTM D 6296-1998 |
用多尺寸气相色谱对火花点火发动机燃料总烯烃的标准试验方法 |
Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multidimensional Gas Chromatography |
| ASTM D 6297-2001 |
桥梁沥青塞接头的标准规范 |
Standard Specification for Asphaltic Plug Joints for Bridges |
| ASTM D 6298-2000 |
具有工厂用金属表面的纤维玻璃增强的苯乙烯-丁二烯-苯乙烯(SBS)改良沥青片的标准规范 |
Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheet with a Factory Applied Metal Surface |
| ASTM D 6299-2000 |
分析测量系统性能评估用应用统计质量保证技术的标准实施规程 |
Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
| ASTM D 6300-1999 |
用于石油产品和润滑油的试验方法中的精密性和偏差数据测定的标准实施规程 |
Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
| ASTM D 6301-1998 |
水中可滤和不可滤物质样品收集的标准操作规程 |
Standard Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water |
| ASTM D 6302-1998 |
离子交换树脂动力行为评价的标准操作规程 |
Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 6303-1998 |
水中甲醛的标准试验方法 |
Standard Test Method for Formaldehyde in Water |
| ASTM D 6305-1998 |
火焰阻滞剂处理的胶合板屋顶盖板计算弯曲强度设计调节因素的标准操作规程 |
Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
| ASTM D 6306-1998 |
室内空气中气态污染物用扩散控制无源检测器安置和使用的标准指南 |
Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air |
| ASTM D 6307-1998 |
用点火方法对热混合沥青的沥青含量的标准试验方法 |
Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
| ASTM D 6311-1998 |
与废物管理活动有关的环境数据产生的标准指南:取样设计的选择和优化 |
Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design |
| ASTM D 6312-1998 |
地下水探测监测程序用开发适当的统计近似值的标准指南 |
Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs |
| ASTM D 6313-1999 |
通过氢热解和硫特殊差别光度学对芳香化合物中总硫的试验方法 |
Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry |
| ASTM D 6314-1998 |
碳氟化合物全氟甲氧基树脂(MFA)模制和挤压材料的标准规范 |
Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials |
| ASTM D 6315-1998 |
驳船顶煤炭手工取样的标准操作规程 |
Standard Practice for Manual Sampling of Coal from Tops of Barges |
| ASTM D 6316-2000 |
煤和焦炭的固体残留物中可燃烧碳化碳总量测定的标准试验方法 |
Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke |
| ASTM D 6317-1998 |
通过紫外线,过硫酸盐氧化,和膜导检测对水中总碳,有机碳,无机碳低水平测定的标准试验方法 |
Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM D 6318-1998 |
用棒检验方法对回声测深仪的标准操作规程 |
Standard Practice for Calibrating a Fathometer Using a Bar Check Method |
| ASTM D 6319-1999 |
医用丁腈检验手套的标准规范 |
Standard Specification for Nitrile Examination Gloves for Medical Application |
| ASTM D 632-2001 |
氯化钠标准规范 |
Standard Specification for Sodium Chloride |
| ASTM D 6320-1999 |
钢制的单丝软管增强金属线的标准试验方法 |
Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel |
| ASTM D 6321-1998 |
可机洗的T恤衫评价的标准操作规程 |
Standard Practice for the Evaluation of Machine Washable T-Shirts |
| ASTM D 6323-1998 |
与废物管理活动有关的介质的实验室次级取样的标准指南 |
Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM D 6324-1999 |
由合成材料生产的阴茎套的标准试验方法 |
Standard Test Method for Male Condoms Made from Synthetic Materials |
| ASTM D 6325-1998 |
测定地毯胶合铺料粘合剂的开放装配时间的试验方法 |
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
| ASTM D 6326-1998 |
U.S.系列等动力悬浮-沉淀取样器最大接转速率比率和深度的选择的标准操作规程 |
Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers |
| ASTM D 6327-1998 |
通过滤膜上活动取样对室内空气工作水平和氡衰减产品浓度测定的标准试验方法 |
Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
| ASTM D 6328-1998 |
大气湿度沉淀的化学分析的质量保证协议的标准指南 |
Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition |
| ASTM D 6329-1998 |
使用静态环境室支持微生物生长的室内材料能力评价方法学的开发标准指南 |
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM D 633-1997 |
路用柏油的体积修正表 |
Volume Correction Table for Road Tar |
| ASTM D 6330-1998 |
在限定的试验条件下使用小型环境室测定由木基板散发的挥发性有机化合物(甲醛除外)的标准操作规程 |
Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM D 6331-1998 |
低浓度下来源于固定源的颗粒物质质量测定的标准试验方法(手工重量计法) |
Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| ASTM D 6332-1999 |
测量一氧化碳测量器对气体和蒸气的动态反应的试验系统的标准指南 |
Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ASTM D 6333-1998 |
地板上可去除的杀虫剂残留物收集的标准操作规程 |
Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
| ASTM D 6334-1998 |
波长分布X-射线荧光法测定汽油中硫的标准试验方法 |
Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence |
| ASTM D 6335-1998 |
通过热氧化发动机油模拟试验测定高温沉积物的标准试验方法 |
Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test |
| ASTM D 6336-1998 |
用真空改良的σ刀片混合物对车辆颜料湿度评价的操作规程 |
Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified sigma Blade Mixer |
| ASTM D 6337-1998 |
应用机织涂料的织物的物理特性的标准操作规程 |
Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics |
| ASTM D 6338-1998 |
高交联热塑性硫化产品(HCTPVS)的标准分类系统 |
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs) |
| ASTM D 6339-1998 |
间同立构聚苯乙烯模塑与挤压(SPS)标准规范 |
Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
| ASTM D 6340-1998 |
在含水或合成环境中测定放射性标记塑料材料的需氧生物降解性的标准试验方法 |
Standard Test Method for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment |
| ASTM D 6341-1998 |
测定-30到140°F(-34.4到60℃)之间塑料制材和型材线热膨胀系数的标准试验方法 |
Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140&*176F (-34.4 and 60&*176C) |
| ASTM D 6342-1998 |
聚氨基甲酸乙酯原料的标准实施规范:利用近红外谱法测定多醇中的羟基值 |
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
| ASTM D 6343-1999 |
电绝缘和电介质用薄导热固体材料的试验方法 |
Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications |
| ASTM D 6344-1998 |
运输包装集中冲击的标准试验方法 |
Standard Test Method for Concentrated Impacts to Transport Packages |
| ASTM D 6345-1998 |
空气中挥发性有机化合物活动性的集中的取样方法选择的标准指南 |
Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air |
| ASTM D 6346-1998 |
通过家庭有害废物处理收集的验收,隔离和包装材料的标准指南 |
Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 6347/D 6347M-1999 |
用核反射层深度密度法测定煤体密度的标准试验方法 |
Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods |
| ASTM D 6348-1998 |
通过可提取的直接界面傅里叶转换红外度谱仪对气态化合物测定的标准试验方法 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ASTM D 6349-2001 |
感应耦合等离子体-原子发散光谱法测定由煤和焦炭燃烧产生的煤、焦炭和固体残留物中主要和次要素的标准试验方法 |
Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma&*8212;Atomic Emission Spectrometry |
| ASTM D 635-1998 |
自承塑料在水平状态时燃烧速率和/或燃烧蔓延程度及燃烧时间的试验方法 |
Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position |
| ASTM D 6350-1998 |
通过原子荧光光谱学对天然气中汞的取样和分析的标准试验方法 |
Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy |
| ASTM D 6351-1999 |
测定液压液低温流动性和表面特性的标准试验方法 |
Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids |
| ASTM D 6352-1998 |
用气相色谱法测试174℃-700℃沸腾范围内石油馏出物沸腾范围分布的标准试验方法 |
Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&*176C by Gas Chromatography |
| ASTM D 6353-1998 |
铝生产的取样计划和芯取样或预制阳极用标准指南 |
Standard Guide for Sampling Plan and Core Sampling or Prebaked Anodes Used in Aluminum Production |
| ASTM D 6354-1998 |
用于铝生产的碳阴极块的取样计划和芯取样的标准指南 |
Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production |
| ASTM D 6355-1998 |
医用手套人重复损害修补试验的标准试验方法 |
Standard Test Method for human Repeat Insult Patch Testing of Medical Gloves |
| ASTM D 6356-1998 |
用作屋顶防护涂层的铝乳化沥青的氢气体产生的标准试验方法 |
Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 6357-2000 |
用感应耦合等离子体原子发散、感应耦合等离子质谱和石墨炉原子吸收光谱法测定由煤应用过程产生的燃烧残留物、焦炭和煤中痕量素的试验方法 |
Test Methods for Determination of Trace Elements in Coal, Coke, Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, and Graphite Furnace Atomic Aborption Spectrometries |
| ASTM D 6358-1999 |
用ISO方法注塑与挤制聚苯硫材料的标准分类系统 |
Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods |
| ASTM D 6359-1999 |
使用便携式手操作装置对新应用人行道标记的最小回射测定的标准规范 |
Standard Specification for Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments |
| ASTM D 6360-1999 |
塑料的闭合碳弧曝光标准实施规范 |
Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM D 6361-1998 |
清洁剂的选择与处理用标准指南 |
Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM D 6362-1998 |
水分析参考材料合格性的标准操作规程 |
Standard Practice for Certificates of Reference Materials for Water Analysis |
| ASTM D 6363-1998 |
通过过氧化物酶荧光法对大气水样品中过氧化氢和结合的有机过氧化物测定的标准试验方法 |
Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ASTM D 6364-1999 |
土工合成织物短期压缩处理测定的标准试验方法 |
Standard Test Method for Determining the Short-Term Compression Behavior of Geosynthetics |
| ASTM D 6365-1999 |
使用火花试验对土工膜缝的非破坏性试验的标准操作规程 |
Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 6366-1999 |
通过氧化燃烧和电化学检测对液态芳香烃中总痕量氮和其衍生物测定的标准试验方法 |
Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection |
| ASTM D 6367-1999 |
AMS(α-甲基苯乙烯)的标准规范 |
Standard Specification for AMS (alpha-Methylstyrene) |
| ASTM D 6368-1999 |
常规的丙基溴化物的一般级别和蒸气脱脂级别的标准规范 |
Standard Specification for Vapor-Degreasing Grade and General Grade normal-Propyl Bromide |
| ASTM D 6370-1999 |
用热重力法对橡胶组成分析的标准试验方法 |
Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
| ASTM D 6371-1999 |
测定柴油机和加热燃料的冷滤网淤塞点的标准试验方法 |
Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels |
| ASTM D 6372-1999 |
微表面设计,试验和建造的标准操作规程 |
Standard Practice for Design, Testing, and Construction of Micro-Surfacing |
| ASTM D 6373-1999 |
定级沥青粘合剂性能的标准规范 |
Standard Specification for Performance Graded Asphalt Binder |
| ASTM D 6374-1999 |
测定绿色石油焦石英熔化过程中挥发物质的标准试验方法 |
Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure |
| ASTM D 6375-1999 |
用热重分析仪(TGA)Noack法测定润滑油蒸发损失的标准试验方法 |
Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method |
| ASTM D 6376-1999 |
利用波长色散X射线荧光光谱学测定石油焦中痕量金属的标准试验方法 |
Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy |
| ASTM D 6377-1999 |
测定原油蒸气压力的标准试验方法:VPCRx(膨胀方法) |
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method) |
| ASTM D 6378-1999 |
测定石油产品、烃和烃氧化剂混合物蒸气压力(VPx)的标准试验方法(三级膨胀法) |
Standard Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) |
| ASTM D 6379-1999 |
测定航空燃料和石油馏份中芳香烃类的标准试验方法.带有反射指数检测的高效液相色谱法 |
Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates-High Performance Liquid Chromatography Method with Refractive Index Detection |
| ASTM D 638-2001 |
塑料抗拉特性的标准试验方法 |
Standard Test Method for Tensile Properties of Plastics |
| ASTM D 6380-2001 |
沥青轧平屋顶的标准规范(有机油毛毡) |
Standard Specification for Asphalt Roll Roofing (Organic Felt) |
| ASTM D 6381-2000 |
测量沥青盖屋板垂片耐机械提升性的标准试验方法 |
Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance |
| ASTM D 6382-1999 |
屋顶和防水屋顶膜材料的热重力和动态机械分析的标准操作规程 |
Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
| ASTM D 6383-1999 |
由EPDM屋顶膜材料制造的胶粘剂接头的失效时间(蠕变破裂)的标准操作规程 |
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 6384-1999 |
润滑剂的生物降解性和生态毒性的相关标准术语 |
Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants |
| ASTM D 6385-1999 |
通过灰化对活性碳中酸可提取含量的标准试验方法 |
Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing |
| ASTM D 6386-1999 |
锌(热浸镀的)涂覆的铁和钢产品和用于喷涂的五金制品表面准备的标准操作规程 |
Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 6387-1999 |
通过毛细孔气相色谱对松节油和相关的萜烯产品的组成的标准试验方法 |
Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography |
| ASTM D 6388-1999 |
评价土工网耐液体化学性试验的标准操作规程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| ASTM D 6389-1999 |
评价土工织物耐液体化学性试验的标准操作规程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
| ASTM D 638M-1996 |
塑料的抗拉特性试验方法(米制) |
Test Method for Tensile Properties of Plastics (Metric) |
| ASTM D 6390-1999 |
在非压实的沥青混合物中向下排水特性测定的标准试验方法 |
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM D 6391-1999 |
用源于一钻孔的渗入的两个阶段对多孔材料液压传导性限制的现场测量的标准试验方法 |
Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole |
| ASTM D 6393-1999 |
用承载指数对散装固体特性的标准试验方法 |
Standard Test Method for Bulk Solids Characterization by Carr Indices |
| ASTM D 6394-2001 |
磺基塑料(SP)的标准规范 |
Standard Specification for Sulfone Plastics (SP) |
| ASTM D 6395-1999 |
测试钢性塑料耐平面柔性冲击性能的标准试验方法 |
Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics |
| ASTM D 6396-1999 |
测试T形管上管螺纹密封层的标准试验方法 |
Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
| ASTM D 6398-2001 |
增强标签上药物名称的识别的标准实施规程 |
Standard Practice to Enhance Identification of Drug Names on Labels |
| ASTM D 6399-1999 |
非行器舱中测量空气质量的方法和仪器选择的标准指南 |
Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins |
| ASTM D 6400-1999 |
可合成塑料的标准规范 |
Standard Specification for Compstable Plastics |
| ASTM D 6401-1999 |
植物性单宁材料提取中测定单宁和非单宁的标准试验方法 |
Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials |
| ASTM D 6402-1999 |
植物性单宁材料提取中测定可溶固体和非溶解物的标准试验方法 |
Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials |
| ASTM D 6403-1999 |
原材料和用过的材料中测定潮气的标准试验方法 |
Standard Test Method for Determining Moisture in Raw and Spent Materials |
| ASTM D 6404-1999 |
含单宁的植物材料取样的标准操作规程 |
Standard Practice for Sampling Vegetable Materials Containing Tannin |
| ASTM D 6405-1999 |
从原材料和用过的材料中提取单宁的标准操作规程 |
Standard Practice for Extraction of Tannins from Raw and Spent Materials |
| ASTM D 6406-1999 |
植物单宁材料中糖的分析的标准试验方法 |
Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com