标准号 |
中文名称 |
英文名称 |
ANSI/ASTM D6735-2002 |
测量矿物焙烧排气源中的气体氯化物和氟化物的试验方法. 撞击器方法 |
(Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources - Impinger Method ) |
ANSI/ASTM D6748a-2002 |
测定由Phenalenes和Phenalenones存在而产生的中间馏出燃料的潜在不稳定性的试验方法.便携式光谱仪的快速测 |
(Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones. Rapid Method by Portable Spectrophotometer ) |
ANSI/ASTM D6749-2002 |
石油产品的倾点试验方法(自动空气压力法) |
(Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) ) |
ANSI/ASTM D6750-2002 |
评估高速单缸柴油发动机中机油的试验方法.1k程序(0.4%燃料硫)和1n程序(0.4%燃料硫) |
(Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - 1k Procedure (0.4% Fuel Sulfur) and 1n Procedure (0.04% Fuel Sulfur) ) |
ANSI/ASTM D6750-2005 |
评价高速单缸柴油发动机机油的试验方法.1k程序(0.4%燃料硫)和1n程序(0.04%燃料硫) |
|
ANSI/ASTM D6751-2004 |
蒸馏燃料用生物柴油燃料(B100)混合材料的临时规范 |
|
ANSI/ASTM D6751-2004 |
蒸馏燃料用生物柴油燃料(B100)混合材料的临时规范 |
(Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels ) |
ANSI/ASTM D6756-2002 |
使用便携式光谱检测仪测定红染料污染浓度和估算柴油和加热油的 ASTM色彩的试验方法 |
(Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer ) |
ANSI/ASTM D6777-2002 |
测定三氯乙烯的相对硬度的试验方法 |
(Test Method for Relative Rigidity of Poly(Vinyl Chloride) (PVC) Siding ) |
ANSI/ASTM D6779-2003 |
聚酰胺模塑和挤塑材料的分类系统 |
(Classification System for Polyamide Molding and Extrusion Materials PA ) |
ANSI/ASTM D6783-2003 |
聚合物混凝土管规范 |
(Specification for Polymer Concrete Pipe ) |
ANSI/ASTM D6783-2005 |
聚合物混凝土管规范 |
|
ANSI/ASTM D6784-2002 |
燃煤固定源产生的废气中单体的氧化的粒子粘合的总汞含量的试验方法(Ontario Hydro法) |
(Test Method for Elemental, Oxidized, Particle-Bound, and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) ) |
ANSI/ASTM D6789a-2002 |
用氙弧曝光装置进行打印纸和书写纸加速照明老化的试验方法 |
(Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus ) |
ANSI/ASTM D6791-2002 |
测定煅烧的石油焦炭的晶粒稳定性的试验方法 |
(Test Method for the Determination of Grain Stability of Calcined Petroleum Coke ) |
ANSI/ASTM D6792-2003 |
石油产品和润滑剂检验实验室的质量体系指南 |
(Guide for a Quality System in Petroleum Products and Lubricants Testing Laboratories ) |
ANSI/ASTM D6792-2005 |
石油产品和润滑剂检验实验室的质量体系指南 |
|
ANSI/ASTM D6792a-2004 |
石油产品和润滑剂检验实验室的质量体系指南 |
|
ANSI/ASTM D6793-2002 |
测定等温正割和正切体积弹性模量的试验方法 |
(Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus ) |
ANSI/ASTM D6794-2002 |
测定加入不同量水6H处理后对机油可燃性影响的试验方法 |
(Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 H) Heating Time ) |
ANSI/ASTM D6795-2002 |
测定加入水和干冰短时间(30分钟)处理后对机油可燃性影响的试验方法 |
(Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 Min) Heating Time ) |
ANSI/ASTM D6800-2002 |
用ICP-MS分析痕量金属的还原性沉淀预浓缩技术制备水样品的实施规程 |
(Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for Icp-Ms Analysis of Trace Metals ) |
ANSI/ASTM D6803-2002 |
用小型环境试验室对涂料中放出的挥发性有机化合物(包括羰基化合物)检验和取样的实施规程 |
(Practice for Testing and Sampling of Volatile Organic Compounds (including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers ) |
ANSI/ASTM D6807-2002 |
反向渗透率为2-100US/EM的持续的电去电离作用系统运行性能的试验方法 |
(Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from 2 - 100 US/EM ) |
ANSI/ASTM D6808-2002 |
水分析用标准物质生产者的能力要求的实施规程 |
(Practice for Competency Requirements of Reference Material Producers for Water Analysis ) |
ANSI/ASTM D6810-2002 |
利用线性扫描伏安法测定汽轮机油中的合成树脂酚的抗氧化含量的试验方法 |
(Test Method for Measurement fo Hindered Phenolic Antioxidant Content in Turbine Oil by Linear Sweep Voltammetry ) |
ANSI/ASTM D6811-2002 |
在湍流条件下测量航空器涡轮机燃料的热稳定性的试验方法 |
(Test Method of Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HIRETS Method) ) |
ANSI/ASTM D6812-2002 |
评价涡轮增压器/增加负荷量的火花点燃飞行器发电机地面站辛烷的实施规程 |
(Practice for Ground-Based Octane Rating Turbocharged/Supercharged Spark Ignition Aircraft Engines ) |
ANSI/ASTM D6813a-2002 |
活塞泵用液压油性能评定指南 |
(Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps ) |
ANSI/ASTM D6819-2002 |
用烘干炉曝光装置测定打印纸和书写纸的加速温度老化的试验方法 |
(Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus ) |
ANSI/ASTM D6821-2002 |
测定恒定剪切应力粘度计中传动线路润滑剂粘度的试验方法 |
(Test Method for Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer ) |
ANSI/ASTM D6822-2002 |
用温差比重计法测定原有和液化石油产品的密度、相对密度和API重量的试验方法 |
(Test Method for Density, Relative Density and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method ) |
ANSI/ASTM D6823-2002 |
掺有废润滑油的商用锅炉燃料标准规范 |
(Standard Specification for Commercial Boiler Fuels with Used Lubricating Oils ) |
ANSI/ASTM D6824-2003 |
测定航空燃气涡轮发动机燃料的可滤性 |
(Determining Filterability of Aviation Turbine Fuel ) |
ANSI/ASTM D6833-2002 |
用污染室曝露装置测定打印纸和书写纸加速污染老化的试验方法 |
(Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus ) |
ANSI/ASTM D6837-2004 |
乘用车和轻型货车VIB序列火花点火发动机中汽车机油节油效果测量的试验方法 |
(Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIB Spark Ignition Engine ) |
ANSI/ASTM D6837-2005 |
测量乘用车和轻型货车VIB序列火花点火发动机中汽车机油节油效果的试验方法 |
|
ANSI/ASTM D6838-2002 |
Cummins M11浓积炭试验的试验方法 |
(Test Method for Cummins M11 High Shoot Test ) |
ANSI/ASTM D6838-2004 |
Cummins M11浓积炭试验的试验方法 |
|
ANSI/ASTM D6839-2002 |
气相色谱法测定火花点火发动机燃料中烃类、氧饱和化合物及苯含量的试验方法 |
(Test Method for Hydrocarbons Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography ) |
ANSI/ASTM D6849-2002 |
液化石油气试验方法用简易气瓶中液化石油气的储存和使用实施规范 |
(Practice for Storage and Use of LPG in Sample Cylinders for LPG Test Methods ) |
ANSI/ASTM D6850-2003 |
水中筛选法的Qc指南 |
(Guide for Qc of Screening Methods in Water ) |
ANSI/ASTM D6855-2003 |
静态模式下5Ntu以下的浑浊度的测定的试验方法 |
(Test Method for Determination of Turbidity Below 5 Ntu in Static Mode ) |
ANSI/ASTM D6864-2003 |
实心彩色塑料壁板产品的颜色和外观保持性规范 |
(Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products ) |
ANSI/ASTM D6879-2003 |
色漆和清漆.摆杆阻尼试验 |
(Paints and Varnishes - Pendulum Damping Test ) |
ANSI/ASTM D6888-2003 |
用气体扩散分离和电流计探测法对有效氰化物进行配位位移和流量注入分析的试验方法 |
(Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection ) |
ANSI/ASTM D6888-2004 |
用气体扩散分离和电流计探测法对有效氰化物进行配位位移和流量注入分析的试验方法 |
|
ANSI/ASTM D6889-2003 |
用固相微萃取法(SPME)筛分水中挥发性化合物的实施规程 |
(Practice for Screening for Volatile Organic Compounds in Water Using Solid Phase Microextration (SPME) ) |
ANSI/ASTM D689-2003 |
纸的内部抗撕裂性的试验方法 |
(Test Method for Internal Tearing Resistance of Paper ) |
ANSI/ASTM D6890-2004 |
用等容室燃烧法测定柴油燃料油的滞燃期和导出十六烷值(DCN)的试验方法 |
|
ANSI/ASTM D6890a-2003 |
用等容室中燃烧法测定柴油燃料的着火落后期和导出十六烷值(DCN)的试验方法 |
(Test Method for the Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber ) |
ANSI/ASTM D6891-2003 |
顺序Iva火花点火发动机中汽车发动机油评定的试验方法 |
(Test Method for Evaluation of Automotive Engine Oils in the Sequence Iva Spark-ignition Engine ) |
ANSI/ASTM D6892-2003 |
石油制品倾点的试验方法(自动倾斜法) |
(Test Method for Pour Point of Petroleum Products (robotic Tilt Method) ) |
ANSI/ASTM D6894-2003 |
直接喷射式涡轮增压汽车柴油发动机中机油的充气阻力评价的试验方法 |
(Test Method for Evaluation of the Aeration Resistance of Engine Oils in a Direct-injected Turbocharged Automotive Diesel Engine ) |
ANSI/ASTM D6895-2003 |
重型柴油放出油在100℃时旋转粘度的试验方法 |
(Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 C ) |
ANSI/ASTM D6896-2003 |
低温下废机油的屈服应力和表观粘度测定的试验方法 |
(Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature ) |
ANSI/ASTM D6897-2003 |
液化石油气(LPG)蒸气压力的试验方法(膨胀法) |
(Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method) ) |
ANSI/ASTM D6897-2004 |
液化石油气(LPG)蒸气压力的试验方法(膨胀法) |
|
ANSI/ASTM D6898-2003 |
用喷油泵装置评价柴油润滑性的试验方法 |
(Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig ) |
ANSI/ASTM D6908-2003 |
水过滤膜系统的一体测试实用规程 |
(Practice for Integrity Testing of Water Filtration Membrane Systems ) |
ANSI/ASTM D6920-2003 |
用氧化燃烧和电化学探测法测量石脑油、馏出液、重整汽油、柴油、生物柴油和发动机燃料中硫总含量的试验方法 |
(Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection ) |
ANSI/ASTM D6922-2003 |
汽车发动机中均匀性和可混性测量的试验方法 |
(Test Method for Measuring Homogeneity and Miscibility in Automotive Engine ) |
ANSI/ASTM D6923-2003 |
高速单缸柴油发动机中机油的评价的试验方法.卡特皮勒IR试验规程 |
(Test Method for Evaluation of Engine Oils in a High Speed, Single-cylinder Diesel Engine-caterpillar IR Test Procedure ) |
ANSI/ASTM D6973-2004 |
高压定容叶轮泵中石油液压液耐磨特性指示的试验方法 |
|
ANSI/ASTM D6973-2005 |
高压定容叶轮泵中石油液压液耐磨特性指示的试验方法 |
|
ANSI/ASTM D6984-2005 |
评价序列IIIF火花点火发动机中汽车机油的试验方法 |
|
ANSI/ASTM D6987-2005 |
评价T-10排气再循环柴油发动机中柴油的试验方法 |
|
ANSI/ASTM D6994-2004 |
用UV探测阴离子交换色谱法测定废水、地表水、地下水和饮用水中金属氰化混合物的试验方法 |
|
ANSI/ASTM D7038-2004 |
机动车齿轮润滑剂耐湿腐蚀性评价的试验方法 |
|
ANSI/ASTM D7038-2005 |
机动车齿轮润滑剂耐湿腐蚀性评定的试验方法 |
|
ANSI/ASTM D7039-2004 |
用单色波长色散X射线荧光光谱法测定汽油和柴油中硫的试验方法 |
|
ANSI/ASTM D7040-2004 |
用感应耦合等离子体原子辐射光谱测定法测定Gf 4润滑油中低能磷的试验方法 |
|
ANSI/ASTM D7041-2004 |
用火焰光度检测的联机气相色谱法测定轻质烃类、机动车燃料和燃油中硫的总含量的试验方法 |
|
ANSI/ASTM D7042-2004 |
用Stabinger粘度计测定液体的动态粘度和密度的试验方法(运动粘度的计算) |
|
ANSI/ASTM D7043-2004 |
恒定容积叶轮泵中石油和非石油液压液的耐磨性指示的试验方法 |
|
ANSI/ASTM D7043a-2004 |
固定容量离心泵中石油和非石油液压液磨损特性指示的试验方法 |
|
ANSI/ASTM D7058-2004 |
用便携式可见光谱测定仪评估航空涡轮燃料和煤油的赛波特颜色和测定红色染料浓度的标准试验方法 |
|
ANSI/ASTM D7059-2004 |
用多维气相色谱法测定原油中甲醇的试验方法 |
|
ANSI/ASTM D7060-2004 |
测定剩余和重型燃料油的胶溶能力和最大絮凝率的试验方法(光学检测法) |
|
ANSI/ASTM D7060-2005 |
测定剩余和重燃料油的最大絮凝率和胶溶能力的试验方法(光学检测法) |
|
ANSI/ASTM D7061-2004 |
用光学扫描装置测量作为可分性值的含沥青重型燃料油的N-庚烷感应相位分离的试验方法 |
|
ANSI/ASTM D7061-2005 |
用光学扫描装置测量作为可分性值的含沥青重燃料油的N-庚烷感应相位分离的试验方法 |
|
ANSI/ASTM D7066-2004 |
用红外测定法测定三氟氯乙烯(s-316)可回收石油和润滑脂及非极性材料的二聚物/三聚物的试验方法 |
|
ANSI/ASTM D7097-2005 |
用热氧化机油模拟试验测定中等高温活塞沉积物的试验方法.Teost Mht |
|
ANSI/ASTM D7098-2005 |
用薄膜氧吸收(tfout)1催化剂B2测定润滑剂氧化稳定性的试验方法 |
|
ANSI/ASTM D7110-2005 |
低温下测定已用机油和含烟机油的粘性-温度关系的试验方法 |
|
ANSI/ASTM D7111-2005 |
用感应耦合等离子体原子发射光谱法(icp-aes)1测定中间馏出燃料痕量素的标准试验方法 |
|
ANSI/ASTM D7171-2005 |
用低分辨率核磁共振光谱法测定石油产品中间馏份中氢含量的标准试验方法 |
|
ANSI/ASTM D721a-2002 |
石油蜡中石油含量的试验方法 |
(Test Method for Oil Content of Petroleum Waxes (05.01, 15.09) ) |
ANSI/ASTM D779-2003 |
用干式指示计法对纸和纸板及其它薄板材料耐水性的试验方法 |
(Test Method For Water Resistance Of Paper, Paperboard, And Other Sheet Materials By The Dry-Indicator Method ) |
ANSI/ASTM D790-2003 |
未增强和增强塑料及电绝缘材料挠曲性能的试验方法 |
(Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (08.01) ) |
ANSI/ASTM D828-2002 |
纸和纸板抗扯裂强度的试验方法 |
(Test Method for Tensile Properties of Paper and Paperboard Using ) |
ANSI/ASTM D857-2002 |
水中铝的试验方法 |
(Test Method for Aluminum in Water ) |
ANSI/ASTM D858-2002 |
水中镁的试验方法 |
(Test Methods for Manganese in Water ) |
ANSI/ASTM D86-2003 |
大气压下石油产品蒸馏的试验方法 |
(Test Method for Distillation of Petroleum Products at Atmospheric Pressure ) |
ANSI/ASTM D86-2004 |
大气压下石油产品蒸馏的试验方法 |
|
ANSI/ASTM D86-2004 |
大气压下石油产品蒸馏的试验方法 |
|
ANSI/ASTM D86-2005 |
大气压下石油产品蒸馏的试验方法 |
|
ANSI/ASTM D873-2002 |
航空燃料氧化稳定性的试验方法.潜在剩余法 |
(Test Method for Oxidation Stability of Aviation Fuels Potential Residue Method ) |
ANSI/ASTM D892-2003 |
润滑油起泡末特性的试验方法 |
(Test Method for Foaming Characteristics of Lubricating Oils ) |
ANSI/ASTM D893-2005 |
已用润滑油中不溶物质的试验方法 |
|
ANSI/ASTM D91-2002 |
润滑油的沉淀值测试方法(05.01) |
(Test Method for Precipitation Number of Lubricating Oils (05.01) ) |
ANSI/ASTM D910-2003 |
航空汽油规范(05.01) |
(Specification for Aviation Gasolines (05.01) ) |
ANSI/ASTM D92-2002 |
用克利夫兰得开杯测定闪点和着火点的试验方法 |
(Flash and Fire Points by Cleveland Open Cup, Method of Test for (04.04, 05.01, 10.03) ) |
ANSI/ASTM D92-2005 |
用克利夫兰得开杯试验器测定闪点和着火点的试验方法 |
|
ANSI/ASTM D938-2004 |
石油蜡(包括凡士林)凝固点的试验方法 |
|
ANSI/ASTM D93a-2002 |
用潘斯基-马丁斯闭杯试验器测定闪点的试验方法 |
(Test Methods for Flash-point by Pensky-Martens Closed Cup Tester ) |
ANSI/ASTM D94-2002 |
石油产品的皂化值试验(05.01,10.03) |
(Saponification Number of Petroleum Products, Test for (05.01, 10.03) ) |
ANSI/ASTM D942-2002 |
用氧弹法对润滑脂的氧化稳定性的试验方法(05.01) |
(Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method (05.01) ) |
ANSI/ASTM D943-2002 |
防腐蚀矿物油氧化特性的试验方法 |
(Test Method for Oxidation Characteristics of Inhibited Mineral Oils ) |
ANSI/ASTM D943-2004 |
防腐蚀矿物油氧化特性的试验方法 |
|
ANSI/ASTM D95-2005 |
蒸馏法测定石油产品和沥青材料含水量的试验方法 |
|
ANSI/ASTM D97-2004 |
倾点的试验方法 |
|
ANSI/ASTM D97-2005 |
石油产品倾点的试验方法 |
|
ANSI/ASTM D974-2002 |
颜色指示器滴定法测量酸值和基本值的试验方法(05.01) |
(Neutralization Number by Color-Indicator Titration, Method of Test for (05.01) ) |
ANSI/ASTM D975-2003 |
柴油机燃料油规范 |
(Specification for Diesel Fuel Oils (05.01) ) |
ANSI/ASTM D975-2004 |
柴油燃料油规范 |
|
ANSI/ASTM D976-2004 |
馏出物十六烷值指数的计算方法 |
|
ANSI/ASTM D976a-2004 |
馏分燃料正十六烷指数计算的试验方法 |
|
ANSI/ASTM E 1000-1996 |
射线检查指南 |
Guide for Radioscopy |