标准号 |
中文名称 |
英文名称 |
ASTM D 3443-2000 |
三氯三氟乙烷中氯化物的标准试验方法 |
Standard Test Method for Chloride in Trichlorotrifluoroethane |
ASTM D 3444-2000 |
三氯三氟乙烷的酸度总值的标准试验方法 |
Standard Test Method for Total Acid Number of Trichlorotrifluoroethane |
ASTM D 3447-2001 |
卤化有机溶剂纯度的标准试验方法 |
Standard Test Method for Purity of Halogenated Organic Solvents |
ASTM D 3448-1985 |
三氯三氟乙烷的特殊水质传导率的试验方法 |
Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane |
ASTM D 345-1997 |
道路和结构用氯化钙的抽样和测试的试验方法 |
Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications |
ASTM D 3450-2000 |
内用建筑涂层可洗性的标准试验方法 |
Standard Test Method for Washability Properties of Interior Architectural Coatings |
ASTM D 3451-2001 |
试验涂层粉末和粉末涂层的标准指南 |
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 3452-1993 |
高温分解气体色层分离法鉴别橡胶的规定 |
Rubber - Identification by Pyrolysis-Gas Chromatography |
ASTM D 3453-1996 |
家具和汽车软垫,床垫及类似用途用软质泡沫材料-氨基甲酸乙酯 |
Flexible Cellular Materials - Urethane for Furniture and Automotive Cushioning, Bedding and Similar Applications |
ASTM D 3454-1997 |
水中镭-226含量的试验方法 |
Test Method for Radium-226 in Water |
ASTM D 3455-1995 |
建筑材料同石油制电绝缘油的兼容性的试验方法 |
Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin |
ASTM D 3456-1986 |
室外暴露试验测定漆膜对微生物侵蚀敏感性的方法 |
Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
ASTM D 3457-1987 |
气态-液态色谱法测定脂肪酸组分,从脂肪酸制备甲基酯的试验方法 |
Test Method for Preparation of Methyl Esters from Fatty Acids for Determination of Fatty Acid Composition by Gas-Liquid Chromatography |
ASTM D 3458-2000 |
永久记录用办公复印机复制品的标准规范 |
Standard Specification for Copies from Office Copying Machines for Permanent Records |
ASTM D 3459-1998 |
木材和木制品涂层的湿干循环的试验方法 |
Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products |
ASTM D 346-1990 |
实验室分析用焦炭试样的收集和制备 |
Collection and Preparation of Coke Samples for Laboratory Analysis |
ASTM D 3460-1998 |
有白色水印和无水印的证券,复印机,油印机,静电和激光复印机用按尺寸切割的办公用纸 |
White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Xerographic and Laser Printer Cut-Sized Office Papers |
ASTM D 3461-1997 |
硬沥青软化点的试验方法(米勒杯球法) |
Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
ASTM D 3462-2000 |
由玻璃毡制的及表面撒矿物粉的沥青屋面板的标准规范 |
Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
ASTM D 3464-1996 |
热风风速计测量导管中的平均速率的试验方法 |
Test Method for Average Velocity in a Duct Using a Thermal Anemometer |
ASTM D 3465-1975 |
用气体色谱法分析增塑剂单体的纯净度 |
Purity of Monomeric Plasticizers by Gas Chromatography |
ASTM D 3466-1976 |
颗粒活性炭燃点的试验方法 |
Test Method for Ignition Temperature of Granular Activated Carbon |
ASTM D 3467-1999 |
活性碳的四氯化碳活性的试验方法 |
Test Method for Carbon Tetrachloride Activity of Activated Carbon |
ASTM D 3468-1999 |
层面和防水用液体氯丁橡胶及氯磺化聚乙烯规格 |
Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
ASTM D 3469-1997 |
防止儿童开启的可脱开的IIA型突耳状闭锁器垂直力测定的试验方法 |
Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
ASTM D 347-1997 |
杂酚油和煤焦油的体积和比重修正表 |
Tables for Volume and Specific Gravity Correction Tables for Creosote and Coal Tar |
ASTM D 3470-1997 |
防止儿童开启的IIA型闭锁器可御式耳状带的试验方法 |
Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures |
ASTM D 3472-1997 |
将防止儿童开启的IA型关闭器反向棘爪扭矩的试验方法 |
Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
ASTM D 3473-1988 |
启动某些防止儿童开启的快速闭合盖所需升力的试验方法 |
Test Methods for Lifting Force Required to Remove Certain Child-Resistant Snap Caps |
ASTM D 3474-1990 |
包装用扭矩计校正及使用方法 |
Calibration and Use of Torque Meters Used in Packaging Applications |
ASTM D 3475-1995 |
防止儿童开启的包装品的分级方法 |
Classification of Child-Resistant Packages |
ASTM D 3477-2000 |
男人和男孩做衬衫用的机织物标准性能规范 |
Standard Performance Specification for Mens and Boys Woven Dress Shirt Fabrics |
ASTM D 3479/D 3479M-1996 |
拉伸的测试方法.定向纤维树脂基合成物的拉伸疲劳度 |
Test Methods for Tension-Tension Fatigue of Oriented Fiber, Resin Matrix Composites |
ASTM D 348-2000 |
电绝缘用刚性管的标准试验方法 |
Standard Test Methods for Rigid Tubes Used for Electrical Insulation |
ASTM D 3480-1988 |
防止儿童开启的快速啮合包装品所需开启或使活动的拉力的试验方法 |
Test Methods for Downward Force Required to Open or Activate Child-Resistant Snap-Engagement Packages |
ASTM D 3481-1997 |
将防止儿童开启的两个同时反向运动的关闭器的两部分分开所需力的试验方法 |
Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
ASTM D 3482-1990 |
测定胶粘剂对铜的电解腐蚀的试验方法 |
Test Method for Determining Electrolytic Corrosion of Copper by Adhesives |
ASTM D 3483-1983 |
蒸汽发生器中沉积物试验方法 |
Test Methods for Accumulated Deposition in a Steam Generator Tube |
ASTM D 3484-1997 |
加油溶解聚丁二烯橡胶评定的标准试验方法 |
Standard Test Methods for Rubber-Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D 3485-1997 |
预组合电线及电缆用平滑壁螺旋形聚乙烯导管 |
Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
ASTM D 3487-1988 |
电气装置中用矿物绝缘油 |
Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 3489-1996 |
微孔氨基甲酸乙酯橡胶的试验方法 |
Test Methods for Rubber - Microcellular Urethane |
ASTM D 349-1999 |
电绝缘用层压圆棒的试验方法 |
Test Methods for Laminated Round Rods Used for Electrical Insulation |
ASTM D 3490-1980 |
软质多孔材料-结合氨基甲酸乙酯泡沫 |
Flexible Cellular Materials - Bonded Urethane Foam |
ASTM D 3491-1992 |
硫化橡胶容器和管道内衬的试验方法 |
Test Methods for Vulcanizable Rubber Tank and Pipe Lining |
ASTM D 3492-1997 |
橡胶避孕套(避孕套) |
Rubber Contraceptives (Condoms) |
ASTM D 3493-2001 |
炭黑的标准试验方法.压制样品的油吸收值 |
Standard Test Method for Carbon Black - Oil Absorption Number of Compressed Sample |
ASTM D 3494-1976 |
水乳化地板抛光剂 |
Water-Emulsion Floor Polish Remover |
ASTM D 3495-1983 |
皮革制品中己烷萃取物的试验方法 |
Test Method for Hexane Extraction of Leather |
ASTM D 3496-1999 |
动态模量试验用沥青混合料样品制备的方法 |
Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing |
ASTM D 3497-1979 |
沥青混合物动态模量的试验方法 |
Test Method for Dynamic Modulus of Asphalt Mixtures |
ASTM D 3498-1999 |
地板系统用胶合板与木骨架粘合用胶粘剂 |
Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
ASTM D 3499-1994 |
胶合板粘性的试验方法 |
Test Method for Toughness of Plywood |
ASTM D 3500-1990 |
胶合板抗拉结构的试验方法 |
Test Methods for Structural Panels in Tension |
ASTM D 3501-1994 |
胶合板的压缩试验 |
Testing Plywood in Compression |
ASTM D 351-1997 |
天然白云母块及薄片的目检质量分级 |
Classification for Natural Moscovite Block Mica and Thins Based on Visual Quality |
ASTM D 3512-1999 |
用无序转筒起球试验器测定纺织物表面的抗起球性及其它有关表面变化的标准试验方法 |
Standard Test Method for Pilling Resistance and Other related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
ASTM D 3513-1996 |
人造短纤维中超长纤维含量的试验方法 |
Test Method for Overlength Fiber Content of Man-Made Staple Fiber |
ASTM D 3514-1999 |
织物抗起球性和耐其他相关表面变化的标准试验方法:弹性浸轧法 |
Standard Test Method for Pilling Resistance and Other related Surface Changes of Textile Fabrics: Elastomeric Pad |
ASTM D 3515-2001 |
热搅拌热铺的沥青铺砌混合物标准规范 |
Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures |
ASTM D 3516-1989 |
灰分纤维素的试验方法 |
Test Methods for Ashing Cellulose |
ASTM D 3517-2001 |
玻璃纤维增强热固树脂压力管标准规范 |
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
ASTM D 3518/D 3518M-1994 |
叠层板材拉伸试验法测定聚合母体合成材料平面内剪切应力和应变反应性的标准实施规程 |
Standard Practice for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +/- 45&*176 Laminate |
ASTM D 3519-1988 |
液体介质中泡沫的测试方法(搅拌器试验) |
Test Method for Foam in Aqueous Media (Blender Test) |
ASTM D 352-1997 |
电绝缘用涂浆云母的试验方法 |
Test Methods for Pasted Mica Used in Electrical Insulation |
ASTM D 3520-1988 |
热处理液体淬火时间的试验方法(磁性淬火方法) |
Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method) |
ASTM D 3521-1986 |
瓦楞纸板表面涂蜡的试验方法 |
Test Method for Surface Wax Coating on Corrugated Board |
ASTM D 3522-1986 |
瓦楞纸板表面涂蜡及浸蜡的试验方法 |
Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing |
ASTM D 3523-1992 |
液体和固体的自然热值试验方法(差示麦克法) |
Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test) |
ASTM D 3524-1990 |
气相色谱法测定用过的柴油机机油中柴油燃料稀释剂的试验方法 |
Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
ASTM D 3525-1993 |
气相色谱法测定用过的汽油发动机机油中汽油稀释剂的试验方法 |
Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography |
ASTM D 3527-1995 |
汽车轮轴承润滑脂寿命试验方法 |
Test Method for Life Performance of Automotive Wheel Bearing Grease |
ASTM D 3528-1996 |
用拉力负荷法测定双搭接剪切粘结接头的强度特性的试验方法 |
Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM D 3529/D 3529M-1997 |
碳纤维环氧树脂预浸渍中树脂固定含量的标准测试方法 |
Standard Test Method for Resin Solids Content of Carbon Fiber-Epoxy Prepreg |
ASTM D 3530/D 3530M-1997 |
合成材料预浸料坯中挥发物含量的标准试验方法 |
Standard Test Method for Volatiles Content of Composite Material Prepreg |
ASTM D 3531-1999 |
碳纤维环氧树脂半固化片的树脂流动性试验方法 |
Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
ASTM D 3532-1999 |
碳纤维环氧树脂半固化片凝固时间的试验方法 |
Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
ASTM D 3533-1990 |
橡胶中氮含量的试验 |
Testing Rubber - Nitrogen Content |
ASTM D 3534-1985 |
水中多氯联苯(PCBs)含量的试验方法 |
Test Method for Polychlorinated Biphenyls (PCBs) in Water |
ASTM D 3535-2000 |
室外潮湿条件下结构木材用胶粘剂在静负荷下抗变形性的标准试验方法 |
Standard Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use) Exposure Conditions |
ASTM D 3539-1987 |
壳式薄膜蒸发计测定挥发性液体蒸发速率的试验方法 |
Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer |
ASTM D 3540-1990 |
合成乙酸伯戊酯(98%级) |
Primary Amyl Acetate, Synthetic (98% Grade) |
ASTM D 3541-1991 |
2-乙基己基丙烯酸酯 |
2-Ethylhexyl Acrylate |
ASTM D 3542-1992 |
桥用预制聚氯丁(橡胶)弹性接头封缝件 |
Preformed Polychloroprene Elastomeric Joint Seals for Bridges |
ASTM D 3543-1993 |
金属滑道粘附性的试验方法 |
Test Method for Metal Glide Adhesion |
ASTM D 3544-1976 |
高模数纤维试验方法和试验结果的报告 |
Reporting Test Methods and Results on High Modulus Fibers |
ASTM D 3545-2002 |
气相色谱法测定乙酸酯中乙醇含量和纯度的标准试验方法 |
Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography |
ASTM D 3546-1990 |
冰乙酸中甲酸的试验方法 |
Test Method for Formic Acid in Glacial Acetic Acid |
ASTM D 3547-1991 |
丙烯酸正丁酯 |
n-Butyl Acrylate |
ASTM D 3548-1999 |
乙烯丙烯酸 |
Ethyl Acrylate |
ASTM D 3549-1993 |
压实沥青铺面混合物样品的厚度或高度的试验方法 |
Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens |
ASTM D 3550-2001 |
土壤的厚壁环衬分隔筒取样的标准实施规程 |
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
ASTM D 3551-1990 |
用机械搅拌器实验室制备土壤-石灰石混合物的方法 |
Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer |
ASTM D 3552/D 3552M-1996 |
纤维增强金属基质复合物的拉伸特性的试验方法 |
Test Method for Tensile Properties of Fiber-Reinforced Metal Matrix Composites |
ASTM D 3553-1976 |
用增强金属基质混合物煮解法测定纤维含量的试验方法 |
Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites |
ASTM D 3554-1998 |
电线及电缆用不留痕迹的黑色热塑高密度聚乙烯绝缘材料 |
Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable |
ASTM D 3555-1998 |
电线及电缆用不留痕迹的黑色交联聚乙烯绝缘 |
Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable |
ASTM D 3556-1985 |
在机械洗碟过程中污物在玻璃器皿上沉积的试验方法 |
Test Method for Deposition on Glassware During Mechanical Dishwashing |
ASTM D 3557-1995 |
水中镉含量的试验方法 |
Test Methods for Cadmium in Water |
ASTM D 3558-1994 |
水中钴含量的试验方法 |
Test Methods for Cobalt in Water |
ASTM D 3559-1996 |
水中铅含量的试验方法 |
Test Methods for Lead in Water |
ASTM D 3561-1996 |
用原子吸收分光光度法测定微咸水,海水和盐水中锂钾和钠离子含量的试验方法 |
Test Method for Lithium, Potassium and Sodium Ions in Brackish Water, Seawater and Brines by Atomic Absorption Spectrophotometry |
ASTM D 3562-1999 |
男人或男孩穿的机织薄大衣及外套织物的性能规格 |
Performance Specification for Mens and Boys Woven Dress Topcoat and Dress Overcoat Fabrics |
ASTM D 3564-1995 |
保养乙烯石棉瓦或地板用地板擦亮剂规程 |
Application of Floor Polishes to Maintain Vinyl Asbestos Tile or Flooring |
ASTM D 3565-1989 |
用机械洗碟去污剂清除餐具图案的试验方法 |
Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents |
ASTM D 3566-1996 |
橡胶.用氧燃烧法测定在氯存在时橡胶中溴含量 |
Rubber - Determination of Bromine in the Presence of Chlorine by Oxygen Combustion |
ASTM D 3567-1997 |
增强热固树脂管及配件的尺寸测定规程 |
Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
ASTM D 3568-1998 |
橡胶用的试验方法.EPDM(乙烯丙烯二烯三聚物)包括与油的混合物的评价 |
Test Methods for Rubber - Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures with Oil |
ASTM D 3569-1995 |
硅酸盐水泥混凝土铺面用抗喷气燃料的弹性型热浇填缝密封料 |
Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements |
ASTM D 3571-1986 |
家用洗衣机和洗碗机用注水软管 |
Consumer Product Household Laundry and Dishwasher Water Inlet Hose |
ASTM D 3572-1986 |
家用洗衣机和洗碗机用排水软管 |
Consumer Product Household Laundry and Dishwasher Drain Hose |
ASTM D 3573-1986 |
家用水槽喷洒软管 |
Consumer Product Sink Spray Hose |
ASTM D 3574-1995 |
软质多孔材料-扁结合的及模制的氨基甲酸乙酯泡沫的试验方法 |
Test Methods for Flexible Cellular Materials - Slab, Bonded and Molded Urethane Foams |
ASTM D 3575-1993 |
烯烃聚合物制软质泡沫材料的试验方法 |
Test Methods for Flexible Cellular Materials Made from Olefin Polymers |
ASTM D 3576-1998 |
测定硬质泡沫塑料的孔空尺寸大小的试验方法 |
Test Method for Cell Size of Rigid Cellular Plastics |
ASTM D 3577-2001 |
外科用橡胶手套的标准规范 |
Standard Specification for Rubber Surgical Gloves |
ASTM D 3577a-2001 |
外科用橡胶手套的标准规范 |
Standard Specification for Rubber Surgical Gloves |
ASTM D 3578-2001 |
橡胶检查手套的标准规范 |
Standard Specification for Rubber Examination Gloves |
ASTM D 3578a-2001 |
检查用橡胶手套的标准规范 |
Standard Specification for Rubber Examination Gloves |
ASTM D 3579-1977 |
彭罗斯型外科用橡皮引流管 |
Rubber Surgical Drainage Tubes, Penrose-Type |