标准号 |
中文名称 |
英文名称 |
ASTM D 5347-1995 |
测量脂肪和油中的灰分含量的实验方法 |
Test Method for Determination of the Ash Content of Fats and Oils |
ASTM D 5348-1995 |
用二甲苯蒸馏测量碘化油和硫酸盐油中的水含量的测试方法 |
Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene |
ASTM D 5349-1995 |
用热板法测量碘化油和硫酸盐油中含水量和挥发量的测试方法 |
Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method |
ASTM D 5350-1995 |
用滴定测试法A测量有机合成三氧化硫的测试方法 |
Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A |
ASTM D 5351-1993 |
用萃取滴定法(试验方法B)测定有机结合的三氧化硫的试验方法 |
Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B |
ASTM D 5352-1995 |
用灰分重量测试法C测量有机合成三氧化硫的测试方法 |
Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric Test Method C |
ASTM D 5353-1995 |
全部脱硫脂肪物的测试方法 |
Test Method for Determination of Total Desulfated Fatty Matter |
ASTM D 5354-1995 |
测量碘化油和硫酸盐油中全部活性组分的测试方法 |
Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils |
ASTM D 5355-1995 |
油和液体脂肪比重的测试方法 |
Test Method for Specific Gravity of Oils and Liquid Fats |
ASTM D 5356-1993 |
铬鞣溶液pH值的测试方法 |
Test Method for PH of Chrome Tanning Solutions |
ASTM D 5357-1998 |
用X射线衍射法测定沸石钠相对结晶度的标准试验方法 |
Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium by X-Ray Diffraction |
ASTM D 5358-1993 |
用汲取取样器或捣碎取样器取样 |
Sampling with a Dipper or Pound Sampler |
ASTM D 5359-1998 |
用于玻璃纤维的从废物中回收的碎玻璃 |
Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber |
ASTM D 5360-1998 |
沥青路面治理的设计和施工 |
Design and Construction of Bituminous Surface Treatments |
ASTM D 5361-2000 |
实验室试验用压实沥青混合料取样的标准操作规程 |
Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing |
ASTM D 5362-1997 |
织物耐粗磨标准试验方法(豆袋试验法) |
Standard Test Method for Snagging Resistance of Fabrics (Bean Bag Test Method) |
ASTM D 5363-1997 |
厌氧的单一成分的胶粘剂(AN) |
Anaerobic Single-Component Adhesives (AN) |
ASTM D 5364-1993 |
燃煤单位玻璃纤维增强塑料烟囱衬里的设计,制造及安装标准导则 |
Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units |
ASTM D 5365-2001 |
玻璃钢(玻璃纤维增强热固树脂)管长期环状弯曲应变的标准试验方法 |
Standard Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM D 5366-1996 |
确定风向标动力特性的试验方法 |
Test Method for Determining the Dynamic Performance of a Wind Vane |
ASTM D 5367-1994 |
用水或水/磨料喷洗时为防止钢生锈用抑制剂处理的表面上镀层评定的标准规范 |
Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
ASTM D 5368-1993 |
固体废弃物样品中溶剂可萃取总含量的重量分析测定试验方法 |
Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples |
ASTM D 5369-1993 |
用索格利特萃取法对化学分析用固体废弃物样品的萃取 |
Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction |
ASTM D 537-1985 |
偏硅酸纳规格 |
Sodium Metasilicate |
ASTM D 5370-1996 |
结构用火山灰混合材料的标准规范 |
Standard Specification for Pozzolanic Blended Materials in Construction Applications |
ASTM D 5372-1993 |
烃类热传导液体的评定 |
Evaluation of Hydrocarbon Heat Transfer Fluids |
ASTM D 5373-1993 |
煤和焦碳的实验室样品中碳、氢和氮的仪器测定试验方法 |
Test Methods for Instrumental Determination of Carbon, Hydrogen and Nitrogen in Laboratory Samples of Coal and Coke |
ASTM D 5374-1993 |
电绝缘评定用实验室强制对流炉的试验方法 |
Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
ASTM D 5375-1993 |
高速下从压敏标杆上去除衬里的标准试验方法 |
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
ASTM D 5375/D 5375M-1998 |
从压敏标签备料中高速线性搬动的标准试验方法 |
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
ASTM D 5376-1993 |
橡胶的化学试验方法.测定橡胶防老化剂中氮的百分比含量:聚合的四氢呋喃(TMQ) |
Test Method for Rubber Chemicals - Determination of the Percent Nitrogen in Rubber Antioxidant: Polymerized TMQ |
ASTM D 5377-1993 |
橡胶配料的分类.底煤 |
Classification for Rubber Compounding Materials - Ground Coal |
ASTM D 5378-1993 |
单位和家用编织和针织浴帘的标准性能规范 |
Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use |
ASTM D 5379/D 5379M-1998 |
用V形切口梁法测定复合材料剪切性能的标准试验方法 |
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
ASTM D 538-1985 |
磷酸三纳规格 |
Trisodium Phosphate |
ASTM D 5380-1993 |
用X射线绕射分析法鉴定涂料中颜料和填充剂的试验方法 |
Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis |
ASTM D 5381-1993 |
颜料和填充剂的X射线萤光(XRF)光谱分析 |
X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders |
ASTM D 5382-2002 |
粉末涂层光学特性评定标准指南 |
Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 5383-1997 |
工艺美术工作者用工美材料光牢性的目视确定 |
Visual Determination of the Lightfastness of Art Materials by Art Technologists |
ASTM D 5384-1995 |
用过的石油产品中氯含量标准试验方法(现场试验工具法)1 |
Standard Test Method for Chlorine in Used Petroleum Products (Field Test Kit Method)1 |
ASTM D 5385-1993 |
防水材料耐静水压力的试验方法 |
Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes |
ASTM D 5386-1993 |
用三色激励测色法对烃类纯净液体进行仪器测量的试验方法 |
Test Method for Instrumental Measurement of Clear Liquid Hydrocarbons Using Tristimulus Colorimetry |
ASTM D 5387-1993 |
非粘性沉积物用全套数据集单标准导则 |
Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments |
ASTM D 5388-1993 |
步进回水法间接测量放电的试验方法 |
Test Method for Indirect Measurements of Discharge by Step-Backwater Method |
ASTM D 5389-1993 |
用传声速度计系统测试明渠流量的试验方法 |
Test Method for Open Channel Flow Measurement by Acoustic Velocity Meter Systems |
ASTM D 5390-1993 |
Palmer-Bowlus量水槽测量水的明渠流量的试验方法 |
Test Method for Open Channel Flow Measurement of Water with Palmer-Bowlus Flumes |
ASTM D 5391-1999 |
高纯度流动水样品电导性和电阻率的测试方法 |
Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
ASTM D 5392-1993 |
用两步膜滤法分离和计数水中大肠杆菌的标准试验方法 |
Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure |
ASTM D 5393-1993 |
汽车内部装饰材料耐雾性能测定的标准试验方法 |
Standard Test Method for Determination of Fogging Characteristics of Vehicle Interior Trim Materials |
ASTM D 5394-1997 |
回收的1,1,1-三氯乙烷 |
Reclaimed 1,1,1-Trichloroethane |
ASTM D 5395-1997 |
回收的二氯甲烷 |
Reclaimed Methylene Chloride |
ASTM D 5396-2000 |
再生全氯乙烯的标准规范 |
Standard Specification for Reclaimed Perchloroethylene |
ASTM D 5397-1999 |
用缺口恒定拉力荷载试验评价聚烯烃土工薄膜抗应力扯裂的标准试验方法 |
Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
ASTM D 5398-1997 |
用户用工美材料光牢性的目视确定 |
Visual Evaluation of the Lightfastness of Art Materials by the User |
ASTM D 5399-1995 |
气相色谱法测定烃类溶剂沸点分布的试验方法 |
Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography |
ASTM D 5400-1993 |
羟基丙基纤维素试验方法 |
Test Methods for Hydroxypropylcellulose |
ASTM D 5401-1993 |
鉴定木材透明防水覆层的试验方法 |
Test Method for Evaluating Clear Water Repellent Coatings on Wood |
ASTM D 5402-1993 |
用溶剂擦除法评价有机覆层的耐溶剂性 |
Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
ASTM D 5403-1993 |
辐射固化材料中挥发物含量的测试方法 |
Test Methods for Volatile Content of Radiation Curable Materials |
ASTM D 5404-1997 |
用旋转蒸气装置从溶液中回收沥青的试验方法 |
Test Method for Recovery of Asphalt from Solution Using the Rotavapor Apparatus |
ASTM D 5405-1998 |
非沥青质有机屋面薄膜材料接缝的蠕变断裂时间试验方法 |
Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
ASTM D 5406-1993 |
橡胶.生产加工性能指数的计算 |
Rubber-Calculation of Producers Process Performance Indexes |
ASTM D 5407-1995 |
不使用孔隙压力测量的三轴压缩中未排水完整岩心试样弹性模量的标准试验方法 |
Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement |
ASTM D 5408-1993 |
描述地下水位置的数据集标准导则:第1部分:附加识别描述符 |
Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors |
ASTM D 5409-1993 |
描述地下水位置的数据集标准导则:第二部分:物质描述符 |
Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two-Physical Descriptors |
ASTM D 541-1987 |
单支黄麻纱规格 |
Single Jute Yarn |
ASTM D 5410-1993 |
描述地下水位的数据单定位的标准指南.第3部分:使用描述符 |
Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors |
ASTM D 5411-1993 |
反应堆冷却剂中放射性核素混合物每次蜕变的平均能量(E)计算的标准规范 |
Standard Practice for Calculation of Average Energy Per Disintegration (E) for a Mixture of Radionuclides in Reactor Coolant |
ASTM D 5412-1993 |
水中络合多环芳烃混合物或石油定量的标准试验方法 |
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM D 5413-1993 |
开口水体中水位测量的标准试验方法 |
Standard Test Methods for Measurement of Water Levels in Open-Water Bodies |
ASTM D 5414-1995 |
使用张拉薄膜评定载荷的水平冲击性能的标准试验方法 |
Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
ASTM D 5415-1995 |
使用振动试验评定张拉材料的载荷保持性能的标准试验方法 |
Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Materials by Vibration Testing |
ASTM D 5416-1995 |
使用振动试验评定张拉材料耐磨性能的标准试验方法 |
Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Materials by Vibration Testing |
ASTM D 5417-1999 |
维特曼(Vettermann)转鼓试验仪器的操作 |
Operation of the Vettermann Drum Tester |
ASTM D 5418-1999 |
用双悬臂梁测量塑料动态力学性能的试验方法 |
Standard Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using a Dual Cantilever Beam |
ASTM D 5419-1995 |
螺纹塑料密封箱抗环境应力裂开性能的标准试验方法 |
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
ASTM D 542-1995 |
透明有机塑料的折射指数的试验方法 |
Test Method for Index of Refraction of Transparent Organic Plastics |
ASTM D 5420-1998 |
使用落锤冲击(Gardner冲击)法的硬质塑性扁平试样耐冲击性能标准试验方法 |
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
ASTM D 5421-1993 |
接触模制玻璃纤维(玻璃-纤维-增强热固树脂)法兰的标准规范 |
Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
ASTM D 5422-1993 |
用螺旋挤压毛细管流变计测量热塑性塑料性能的标准试验方法 |
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer |
ASTM D 5423-1993 |
电绝缘评定用实验室强制对流炉 |
Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
ASTM D 5424-1998 |
电缆或光缆的绝缘材料在立式电缆槽结构中燃烧时烟雾造成黯淡的标准试验方法 |
Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
ASTM D 5425-1996 |
制定电工技术产品易燃性评定标准用的标准指南 |
Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products |
ASTM D 5426-1997 |
充气减震织物的外观检查和等级评定的标准操作规程 |
Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints |
ASTM D 5426a-2001 |
充气减震织物的外观检查和等级评定的标准实施规程 |
Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints |
ASTM D 5427-1998 |
充气减震织物的加速老化 |
Accelerated Aging of Inflatable Restraint Fabrics |
ASTM D 5428-1993 |
评价充气减震软组件性能的方法 |
Evaluating the Performance of Inflatable Restraint Modules |
ASTM D 5429-1993 |
纺织材料保存研究用背衬织物的预处理 |
Pretreatment of Backing Fabrics Used in Textile Conservation Research |
ASTM D 543-1995 |
塑料耐化学试剂性能的试验方法 |
Test Method for Resistance of Plastics to Chemical Reagents |
ASTM D 5430-1993 |
织物目视检验分级的标准试验方法 |
Standard Test Methods for Visually Inspecting and Grading Fabrics |
ASTM D 5431-1993 |
公共机构和家用编织及针织制品的性能规范 |
Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
ASTM D 5432-1993 |
公共机构和家用毛毯制品的性能规范 |
Performance Specification for Blanket Products for Institutional and Household Use |
ASTM D 5433-2000 |
公共机构和家用毛巾制品的标准性能规范 |
Standard Performance Specification for Towel Products for Institutional and Household Use |
ASTM D 5434-1997 |
土壤和岩石地下爆炸现场记录的标准导则 |
Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock |
ASTM D 5435-1993 |
植物生长和食物链保护的土壤诊断试验标准试验方法 |
Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection |
ASTM D 5436-1999 |
铸造聚甲基丙烯酸甲酯塑料棒材、管材和型材标准规范 |
Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
ASTM D 5437-1993 |
曝露在海洋环境下的塑料的老化性试验 |
Weathering of Plastics Under Marine Floating Exposure |
ASTM D 5438-2000 |
化学分析用地板尘埃采集的标准实施规程 |
Standard Practice for Collection of Floor Dust for Chemical Analysis |
ASTM D 5439-1995 |
测定麂皮脂中沉淀物质的测试方法 |
Test Method for Determination of Sediment in Moellon |
ASTM D 5440-1993 |
测定脂肪和油熔点的试验方法 |
Test Method for Determining the Melting Point of Fats and Oils |
ASTM D 5441-1998 |
用色谱法分析甲基特丁基乙醚的标准试验方法 |
Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography |
ASTM D 5442-1993 |
用色谱法分析石油石蜡的标准试验方法 |
Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography |
ASTM D 5443-1993 |
200℃用多维气相色谱法分析石油馏份中石蜡,环烷和芳烃类型的标准试验方法 |
Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200degree C by Multi-Dimensional Gas Chromatography |
ASTM D 5444-1998 |
萃取集料机械粒度分析的测试方法 |
Test Method for Mechanical Size Analysis of Extracted Aggregate |
ASTM D 5445-2001 |
商品贮运用图示标志的标准实施规程 |
Standard Practice for Pictorial Markings for Handling of Goods |
ASTM D 5446-2001 |
测定膨胀式安全保护装置用织物、纱线和缝纫线物理性能的标准实施规范 |
Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
ASTM D 5447-1993 |
地下水流型应用于现场特定问题的标准导则 |
Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem |
ASTM D 5448/D 5448M-1993 |
环形缠绕聚合母体复合圆柱体的表面剪切特性的标准试验方法 |
Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 5449/D 5449M-1993 |
环箍绕制的聚合物基体合成材料圆筒的横向抗压缩性能的标准试验方法 |
Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 545-1999 |
混凝土结构用预制膨胀接缝填料的试验方法(非挤压和弹性型) |
Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) |
ASTM D 5450/D 5450M-1993 |
环箍绕制的聚合物基体合成材料圆筒的横向抗拉性能的标准试验方法 |
Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 5452-2000 |
实验室渗透法测试航空燃料中微粒子污染的标准试验方法 |
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 5453-1993 |
用紫外荧光法测定轻质烃,发动机燃料和油中总的硫含量的标准试验方法 |
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence |
ASTM D 5454-1993 |
使用电子湿度分析仪测定气体燃料中水蒸汽含量的标准试验方法 |
Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers |
ASTM D 5455-1993 |
纸中短时间液体吸附的标准试验方法(BRISTOW试验) |
Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) |
ASTM D 5456-2001 |
结构复合木制品评定的标准规范 |
Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456a-2001 |
结构复合木制品评定的标准规范 |
Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5457-1993 |
载荷和阻力系数设计用木基材料和结构连接件的标准阻力计算标准规范 |
Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
ASTM D 5458-1995 |
张拉材料剥离的标准试验方法 |
Standard Test Method for Peel Cling of Stretch Wrap Material |
ASTM D 5459-1995 |
张拉材料加工方向弹性恢复和永久变形和应力保持标准试验方法 |
Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Materials |