标准号 |
中文名称 |
英文名称 |
ASTM E 1739-1995 |
喷油现场纠正危险作用用的标准指南 |
Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites |
ASTM E 1740-1995 |
用锥形热量计测定墙面覆层材料的释热率及其它耐火试验响应特性的标准试验方法 |
Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
ASTM E 1741-1995 |
原子光谱分析用放射性强度衰减时空气中微粒铅样品制备的标准规程 |
Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry |
ASTM E 1742-1995 |
放射照象检验标准实用规程 |
Standard Practice for Radiographic Examination |
ASTM E 1743-1996 |
道路标志材料测量用便协式反光镜的选择和使用用标准实用规程 |
Standard Practice for Selection and Use of Portable Retroreflectometers for the Measurement of Pavement Marking Materials |
ASTM E 1744-1998 |
计算机患者记录中紧急医疗处理形式的标准指南 |
Standard Guide for View of Emergency Medical Care in the Computerized Patient Record |
ASTM E 1745-1997 |
混凝土板下土壤或粒状填料接触的水蒸气缓凝剂用标准规范 |
Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
ASTM E 1746-1995 |
液态氯其他杂质取样和分析的标准试验方法 |
Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities |
ASTM E 1747-1995 |
超临界流体应用中二氧化碳纯度标准指南 |
Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
ASTM E 1748-1995 |
评定纱窗和窗户作为一个整体系统相配合程度的标准试验方法 |
Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
ASTM E 1749-2000 |
刚性壁可再定位掩蔽物的相关标准术语 |
Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM E 175-1982 |
显微镜用术语 |
Terminology of Microscopy |
ASTM E 1750-1995 |
水三相点瓶标准使用指南 |
Standard Guide for Use of Water Triple Point Cells |
ASTM E 1751-1995 |
非字符表示热电偶温度电动势表标准指南 |
Standard Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations |
ASTM E 1752-1995 |
与乙二醇脱水剂有关的多媒体现场辐射和释放数据的采集标准指南 |
Standard Guide for Collection of Multi-Media Field Emission and Discharge Data Associated with Glycol Dehydration Units |
ASTM E 1753-2001 |
干漆膜中铅含量检测用定性化学抽查试验工具标准规程 |
Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1754-1995 |
用红外线分光光度法测定液体氯中低水平标准测试方法 |
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry |
ASTM E 1755-2001 |
生物物质中灰分的标准测试方法 |
Standard Test Method for Ash in Biomass |
ASTM E 1756-2001 |
生物物质中总固体量的标准测试方法 |
Standard Test Method for Determination of Total Solids in Biomass |
ASTM E 1757-2001 |
化合物分析用生物物质制备的标准实施规范 |
Standard Practice for Preparation of Biomass for Compositional Analysis |
ASTM E 1758-2001 |
用高效液相色谱法测定生物物质中碳水化合物的标准试验方法 |
Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography |
ASTM E 1759-1995 |
蛋白质中异天门冬氨酸的标准测试方法.天门冬酰胺脱酰胺基制品的测定方法 |
Standard Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products |
ASTM E 176-2001 |
防火标准的标准术语 |
Standard Terminology of Fire Standards |
ASTM E 1760-1996 |
含放射性残余物的松散材料的无约束处理的标准导则 |
Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity |
ASTM E 1761-1995 |
金属疲劳和破裂数据计算机化中用的数据录制推荐格式的标准导则 |
Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals |
ASTM E 1762-1995 |
保健信息的电子鉴定用标准指南 |
Standard Guide for Electronic Authentication of Health Care Information |
ASTM E 1763-1998 |
化学分析方法的实验室间试验结果的解释和使用的标准指南 |
Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods |
ASTM E 1765-1998 |
利用分析体系过程(AHP)进行有关建筑物和建筑系统投资的多属性决策分析的标准实用规程 |
Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems |
ASTM E 1766-1995 |
医疗装置再使用的消毒处理的有效性的标准测试方法 |
Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices |
ASTM E 1767-1995 |
材料外观特性的观察和测量的几何规定用标准使用规程 |
Standard Practice for Specifying the Geometry of Observations and Measurements to Characterize the Appearance of Materials |
ASTM E 1768-1995 |
淡水鱼的肺换气行为毒理学试验用标准导则 |
Standard Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish |
ASTM E 1769-1995 |
电子健康记录和记录系统特性的标准指南 |
Standard Guide for Properties of Electronic Health Records and Record Systems |
ASTM E 177-1990 |
ASTM试验方法中精密度和偏倚术语的使用 |
Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM E 1770-1995 |
电热原子吸收光谱仪器优化的标准实用规程 |
Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment |
ASTM E 1771-1995 |
测定阳极和粗铜中含铜量的标准测试方法 |
Standard Test Method for Determination of Copper in Anode and Blister Copper |
ASTM E 1772-1995 |
用电感技术测试色谱测量介质颗粒粒度分布的标准测试方法 |
Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique |
ASTM E 1773-1995 |
用聚硫化基密封材料的刚性壁军用掩蔽物的密封标准实用规程 |
Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants |
ASTM E 1774-1996 |
电磁声学传感器用标准指南 |
Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 1775-1996 |
铅的现场提取和现场分析用便协式电子化学或光度分光仪的性能评定标准指南 |
Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM E 1776-1996 |
火灾危险评定标准开发用标准指南 |
Standard Guide for Development of Fire-Risk-Assessment Standards |
ASTM E 1777-1996 |
铺路管理需用数据的优化用标准指南 |
Standard Guide for Prioritization of Data Needs for Pavement Management |
ASTM E 1778-1998 |
有关路面龟裂的标准术语 |
Standard Terminology Relating to Pavement Distress |
ASTM E 1779-1996 |
经营室外燥声测量用测量方案的拟定用标准指南 |
Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements |
ASTM E 178-1994 |
进行远距离观测 |
Dealing with Outlying Observations |
ASTM E 1780-1996 |
户外附近固定声源的声音接收性测量标准导则 |
Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source |
ASTM E 1781-1998 |
声发射传感器的二次校准标准规程 |
Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
ASTM E 1782-1998 |
用热分析法测定蒸气压力的标准试验方法 |
Standard Test Method for Determining Vapor Pressure by Thermal Analysis |
ASTM E 1783-1996 |
建筑物和停车场建筑的预制结构密封带的技术规范 |
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
ASTM E 1784-1997 |
丙烯腈中过氧化物总含量的标准试验方法 |
Standard Test Method for Total Peroxides in Acrylonitrile |
ASTM E 1785-1996 |
丙烯腈标准规范 |
Standard Specification for Acrylonitrile |
ASTM E 1786-1996 |
在线红外分光光度法测定液氯中水的低等级的标准试验方法 |
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry |
ASTM E 1787-1996 |
离子色谱法测定苛性钠和苛性碱(氢氧化钠和氢氧化钾)中阴离子的标准试验方法 |
Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography |
ASTM E 1788-1996 |
丙烯腈中酸度的标准测试方法 |
Standard Test Method for Acidity in Acrylonitrile |
ASTM E 1789-1996 |
书写墨水识别的标准导则 |
Standard Guide for Writing Ink Identification |
ASTM E 179-1996 |
材料的反射和透射性能测量用几何条件的选择 |
Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
ASTM E 1790-1996 |
近红外线定性分析用标准实用规程 |
Standard Practice for Near Infrared Qualitative Analysis |
ASTM E 1791-1996 |
半球形几何结构的近红外线仪器反射系数传送标准的标准规程 |
Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry |
ASTM E 1792-2001 |
表层灰土中铅清除取样材料的标准规范 |
Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1793-1996 |
连入泡沫和梁型可运输遮蔽物中铝合金的制备标准规程 |
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters |
ASTM E 1794-1996 |
用于粘结泡沫中心夹层面板(200 华氏度,高湿设备)的胶粘剂的标准规范 二型面板 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200(degree)F Elevated Humidity Service), Type II Panels |
ASTM E 1795-1996 |
建筑物含铅漆用非增强液体涂层封装产品标准规范 |
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1796-1997 |
建筑物中含铅漆的液体涂层封装产品的选择和使用标准指南 |
Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1797-1996 |
建筑物中含铅漆用增强的液体涂层封装产品用标准规范 |
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1798-1996 |
有机化学生物降解评估可处理性的标准试验方法 |
Standard Test Method for Assessing Treatability or biodegradability, or Both, of Organic Chemicals in Porous Pots |
ASTM E 1799-1996 |
光电模件可视检测标准规程 |
Standard Practice for Visual Inspections of Photovoltaic Modules |
ASTM E 18-2002 |
金属材料洛氏硬度和洛氏表面硬度的标准试验方法 |
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials |
ASTM E 180-1999 |
工业化学制品的分析和试验的ASTM的方法的精确度测定的标准规程 |
Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals |
ASTM E 1800-1996 |
粘接泡沫中心夹层面板(160 华氏温度,高湿设备)的胶粘剂的标准规范 一型面板 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160(degree)F Elevated Humidity Service), Type I Panels |
ASTM E 1801-1996 |
粘接泡沫和梁型掩体用铝饰面板标准实用规程 |
Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
ASTM E 1802-2001 |
光电模件的隔湿组件试验的标准测试方法 |
Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules |
ASTM E 1803-1999 |
测定绝缘板结构容量的标准试验方法 |
Standard Test Methods for Determining Structural Capacities of Insulated Panels |
ASTM E 1804-1996 |
项目设计阶段的执行和成本分析报告的标准规程 |
Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
ASTM E 1805-1996 |
重力法测定铜浓缩物中金的试金分析标准试验方法 |
Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry |
ASTM E 1806-1996 |
化合物测定钢铁标准样品的标准操作 |
Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
ASTM E 1807-1996 |
有关金属连接板的标准术语 |
Standard Terminology Pertaining to Metal Connector Plates |
ASTM E 1808-1996 |
设计和操纵可视实验标准指南 |
Standard Guide for Designing and Conducting Visual Experiments |
ASTM E 1809-2001 |
便携式反光镜测量高度可视反光工作服标志材料的标准试验方法 |
Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retrorelectometer |
ASTM E 181-1998 |
放射性核素探测器的校准和分析的一般方法 |
General Methods for Detector Calibration and Analysis of Radionuclides |
ASTM E 1810-1996 |
评估曝露在外的鱼在气味和味道上污染结果的标准规程 |
Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish |
ASTM E 1811-1996 |
老鼠和小家鼠致瘤性研究的标准试验方法 |
Standard Test Method for Oncogenicity Study in Rats and Mice |
ASTM E 1812-1996 |
火焰原子吸收光谱仪器的最优化标准实用规程 |
Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment |
ASTM E 1813-1996 |
扫描探测显微镜探头测量和报告的标准操作 |
Standard Practice for Measuring and Reporting Probe Tip probe in Scanning Probe Microscopy |
ASTM E 1814-1996 |
涂层的计算机层析X射线摄影术(CT)标准实用规程 |
Standard Practice for Computed Tomographic (CT) Examination of Castings |
ASTM E 1815-1996 |
工业放射摄影胶片系统分类用标准试验方法 |
Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 1816-1996 |
用电磁声传导(EMAT)技术的超声波检验用标准实用规程 |
Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
ASTM E 1817-1996 |
使用质量表示指示仪(RQI)的放射检验的质量控制标准实用规程 |
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1818-1996 |
能量在80至300Kev的放射处理用电子束设施中的剂量测量用标准实用规程 |
Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV |
ASTM E 1819-1996 |
核设备退役的环境监测计划标准导则 |
Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities |
ASTM E 1820-2001 |
裂纹韧性测量的标准试验方法 |
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1821-2001 |
用气相色谱法测定生物物质中的碳水化合物的标准试验方法 |
Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography |
ASTM E 1822-1999 |
堆积椅子耐火试验的标准试验方法 |
Standard Test Method for ire Testing of Stacked Chairs |
ASTM E 1823-1996 |
疲劳和裂纹试验相关的标准术语 |
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1824-1996 |
拉力下热机械分析的玻璃转变温度分配的标准试验方法 |
Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension |
ASTM E 1825-1996 |
建筑外墙材料,产品和系统评估的标准指南 |
Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems |
ASTM E 1826-1996 |
低挥发有机化合物的标准规范:用于铝合金粘接的防腐粘接起始端 |
Standard Specification for low Volatile Organic Compound; Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded |
ASTM E 1827-1996 |
用风孔门测定建筑物空气密封性的标准试验方法 |
Standard Test Methods for eDtermining Airtightness of buildings Using an Orifice Blower Door |
ASTM E 1828-1996 |
涂料铅化学污染试验盒性能特性评估的标准指南 |
Standard Guide for Evaluating the Performance characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint |
ASTM E 1829-1997 |
先于表面分析的样品处置标准指南 |
Standard Guide for Handling Specimens Prior to Surface Analysis |
ASTM E 1830-2001 |
测定光电压模数的机械一体性的标准试验方法 |
Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules |
ASTM E 1830M-1996 |
测定光电器件模数的机械整体性的标准试验方法 |
Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules (Metric) |
ASTM E 1831-1996 |
准备与金属和相关材料化学组成有关的参考资料证书的标准指南 |
Standard Guide for Preparing Certificates for Reference materials Relating to Chemical Composition of Metals, Ores, and Related Materials |
ASTM E 1832-1996 |
描述直流等离子光谱发射计特性的标准操作 |
Standard Practice for Describing and Specifying a Direct-Current-Plasma Optical Emission Spectrometer |
ASTM E 1833-1996 |
泡铜铸造化合物组成测定取样的标准操作 |
Standard Practice for Sampling of Blister Copper in Cast for the Determination of Chemical Composition |
ASTM E 1834-1996 |
电热原子吸收光谱法对镍合金中铅测定的标准试验方法 |
Standard Test Method for Determination of Lead in Nickel alloys by Electrothermal Atomic Absorption Spectrometric Method |
ASTM E 1835-1996 |
闪烁原子吸收光谱术对镍合金分析的标准试验方法 |
Standard Test Method for Analysis of Nickel Alloys by Flame atomic Absorption Spectrometry |
ASTM E 1836-2001 |
设备管理用建筑物楼板面积测量的标准分类 |
Standard Classification for Building Floor Area Measurements for Facility Management |
ASTM E 1837-1996 |
可再利用医疗设备(模拟使用试验)消毒过程功效测定的标准试验方法 |
Standard Test Method to Determine Efficacy of Disinfection processes for Reusable Medical Devices (Simulated Use Test) |
ASTM E 1838-1996 |
液体卫生洗手剂的病毒消除非活性测定的标准试验方法 |
Standard Test Method for Determining the Virus-Eliminating inactiveness of Liquid Hygienic Handwash Agents Using the Fingerpads of Adult Volunteers |
ASTM E 1839-1996 |
造纸工业细菌和黏真菌黏液消除剂功效的标准试验方法 |
Standard Test Method for Efficacy of Slimicides for the paper Industry-Bacterial and Fungal Slime |
ASTM E 184-1979 |
高能中子辐射对金属材料机械性能的影响.E706(IB) |
Standard Practice for Effects of High-Energy Neutron Radiation on the Mechanical Properties of Metallic Materials, E706 |
ASTM E 1840-1996 |
分光剂校准ROMAN转换标准的标准指南 |
Standard Guide for Raman Shift Standards for Spectrometer calibration |
ASTM E 1841-1996 |
新水中露出水面的大型植物植物毒素重新诱导的标准指南 |
Standard Guide for Conducting Renewal Phytotoxicity Tests Freshwater Emergent Macrophytes |
ASTM E 1842-1996 |
金属材料宏观洛氏硬度试验的标准试验方法 |
Standard Test Method for Macro-Rockwell Hardness Testing of metallic Materials |
ASTM E 1843-1996 |
性骚扰调查,检验和证据收集的标准指南 |
Standard Guide for Sexual Assault Investigation, examination, and Evidence Collection |
ASTM E 1844-1996 |
尺寸10 X 4-5平滑螺纹摩擦试验轮胎的标准规范 |
Standard Specification for Size 10 X 4-5 Smooth-Tread friction Test Tire |
ASTM E 1845-2001 |
铺地织物中间纵面深度计算的标准实施规程 |
Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth |
ASTM E 1847-1996 |
ASTM指南下毒素试验统计分析的标准操作规程 |
Standard Practice for Statistical Analysis of Toxicity Tests execucted Under ASTM Guidelines |
ASTM E 1848-1996 |
生态污染点的选择和使用的标准指南 |
Standard Guide for Selecting and Using Ecological Endpoints Contaminated Sites |
ASTM E 1849-1996 |
鱼和野生动物监测和报告的标准指南 |
Standard Guide for Fish and Wildlife Incident Monitoring and Reporting |
ASTM E 185-1998 |
为轻水冷却核反应堆容器的实施监督试验,E 706 (IF) |
Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels, E 706 (IF) |