标准号 |
中文名称 |
英文名称 |
ANSI/ASTM F439-2002 |
套节型氯化聚氯乙烯(CPVC)塑料管配件规范(80号表) |
(Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 ) |
ANSI/ASTM F439-2005 |
氯化聚氯乙烯(CPVC)塑料管配件规范.表80 |
|
ANSI/ASTM F449-2002 |
农业排水或地下水位控制用热塑塑料波纹管地下安装实施规程 |
(Practice for Subsurface Installation of Corrugated Thermoplastic Tubing for Agricultural Drainage or Water Table Control ) |
ANSI/ASTM F477-2002 |
连接塑料管用的弹性密封垫圈的规范 |
(Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ) |
ANSI/ASTM F480-2002 |
采用标准尺寸比(SDR)制作的热塑性壁铸造管和耦合件规范(表40和表80) |
(Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), Schedule 40 and Schedule 80) ) |
ANSI/ASTM F493-2004 |
氯化聚氯乙烯(CPVC)塑料管及配件用溶剂粘结剂规范 |
|
ANSI/ASTM F539-2002 |
组装运动鞋的操作规范 |
(Practice for Fitting Athletic Footwear ) |
ANSI/ASTM F542-2002 |
电子件及微电子件封装用密封化合物发热温度的试验方法 |
(Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation ) |
ANSI/ASTM F588-2004 |
窗组件(不包括门窗玻璃)抗强力进入的试验方法 |
|
ANSI/ASTM F610/F 610M-2005 |
用热循环技术评价模塑聚氯乙烯(PVC)塑料管配件质量的试验方法 |
|
ANSI/ASTM F645-2002 |
热塑性水压管道系统的选材、设计和安装指南 |
(Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems ) |
ANSI/ASTM F645-2004 |
热塑性水压管道系统的选定、设计和安装指南 |
|
ANSI/ASTM F656-2002 |
聚氯乙烯塑料管和配件的溶剂胶结接口用打底剂规范 |
(Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ) |
ANSI/ASTM F677-2004 |
用于电子和微电子设备的热固性封装复合剂的耐液体和油脂的试验方法 |
|
ANSI/ASTM F679-2003 |
聚氯乙烯(PVC)大尺寸塑料重力污水管和配件的规范 |
(Specification for Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings ) |
ANSI/ASTM F683-2003 |
管道和机械设备用绝热材料的选择和应用实施规程 |
(Practice for Selection and Application of Thermal Insulation for Piping and Machinery ) |
ANSI/ASTM F683-2004 |
管道和机械隔热的选定和应用实施规程 |
|
ANSI/ASTM F714-2003 |
以外径尺寸为基准的聚乙烯(PE)塑料管(SDR-PR)规范 |
(Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter ) |
ANSI/ASTM F771-2005 |
聚乙烯(PE)热塑性高压灌溉管道系统规范 |
|
ANSI/ASTM F803-2003 |
网球运动员用的护目器规范 |
(Specification for Eye Protectors for Use by Players of Racket Sports ) |
ANSI/ASTM F842-2004 |
水平推拉门组件抗强力进入的试验方法 |
|
ANSI/ASTM F876-2003 |
交联聚乙烯(PEX)管的规范 |
(Specification for Crosslinked Polyethylene (PEX) Tubing ) |
ANSI/ASTM F876-2004 |
交联聚乙烯(PEX)管规范 |
|
ANSI/ASTM F877-2002 |
交联聚乙烯(PEX)塑料冷-热水配水系统的规范 |
(Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems ) |
ANSI/ASTM F905-2004 |
聚乙烯鞍形熔融接头合格鉴定的实施规范 |
|
ANSI/ASTM F910-2004 |
青少年棒球运动员用面部保护罩的规范 |
|
ANSI/ASTM F913-2002 |
连接塑料管用热塑弹性密封件(垫圈)规范 |
(Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe ) |
ANSI/ASTM F914-2003 |
航空人员隔音装置用声发射的试验方法 |
(Test Method for Acoustic Emission for Insulated Aerial Personnel Devices ) |
ANSI/ASTM F987-2004 |
轻便的中等平甲板支撑物规范 |
|
ANSI/ASTM F991M-2004 |
泄水孔塞/放泄塞和轴节配件的规范(米制) |
|
ANSI/ASTM F998-2002 |
船用离心泵规范 |
(Specification for Centrifugal Pump, Shipboard Use ) |
ANSI/ASTM F998-2004 |
船用离心泵规范 |
|
ANSI/sort/IEEE/ASTM SI 10-1997 |
国际单位制的使用标准:现代米制 |
Standard for Use of the International System of Units (SI): The Modern Metric System |
ANSI/sort/IEEE/ASTM SI10-2002 |
国际单位制(SI)的使用标准:现代米制系列 |
(Standard for Use of the International System of Units (SI): The Modern Metric System ) |
ASTM A 1-1992 |
碳素钢丁字轨 |
Carbon Steel Tee Rails |
ASTM A 100-1993 |
硅铁 |
Ferrosilicon |
ASTM A 1001-2001 |
重型型钢中高强度钢铸件的标准规范 |
Standard Specification for High Strength Steel Castings in Heavy Sections |
ASTM A 1002-1999 |
镍铝有序合金铸件的标准规范 |
Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
ASTM A 1007-2002 |
钢丝绳用碳素钢丝标准规范 |
Standard Specification for Carbon Steel Wire for Wire Rope |
ASTM A 1008/A 1008M-2001 |
冷轧碳钢、结构钢、高强度低合金钢和可加工性提高的高强度低合金钢薄板的标准规范 |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
ASTM A 1008/A 1008Ma-2001 |
冷轧碳钢、结构钢、高强度低合金钢和可加工性提高的高强度低合金钢薄板的标准规范 |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
ASTM A 1009-2000 |
高频(10kHz-1 MHz)电力变压器和滤波感应器用软磁性MnZn铁芯材料标准规范 |
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications |
ASTM A 101-1993 |
铬铁 |
Ferrochromium |
ASTM A 1010-2000 |
高强度马氏体不锈钢板、薄板和带材标准规范 |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
ASTM A 1010/A 1010M-2001 |
高强度马氏体不锈钢板材、薄板和带材的标准规范 |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
ASTM A 1011/A 1011M-2001 |
热轧碳钢、结构钢、高强度低合金钢和可加工性提高的高强度低合金钢薄板和带材的标准规范 |
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
ASTM A 1015-2001 |
卫生洁具用管形制品的目视内孔探测检验的标准指南 |
Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
ASTM A 1016/A 1016M-2002 |
铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范 |
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
ASTM A 1017/A 1017M-2001 |
铬钼钨合金钢制压力容器板的标准规范 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
ASTM A 1018/A 1018M-2001 |
改良可成形性高强度低合金和高强度低合金、钶或钒、结构性、热滚轧、深厚度、碳钢卷材、薄板和带材的标准规范 |
Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy with Improved Formability |
ASTM A 1018/A 1018Ma-2001 |
热轧碳钢、结构钢、高强度低合金钢、铌或钒钢及可加工性提高的高强度低合金钢薄板、带材和特厚卷材的标准规范 |
Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy with Improved Formability |
ASTM A 1019/A 1019M-2001 |
排污和排水用聚合物预涂的直径为36英寸或不足36英寸的闭合肋钢管的标准规范 |
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains |
ASTM A 102-1993 |
钒铁合金 |
Ferrovanadium |
ASTM A 1020/A 1020M-2001 |
评价被动植入物MR图像制品的标准试验方法 |
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants |
ASTM A 1021-2001 |
高温设备用马氏体不锈钢锻件和锻坯的标准规范 |
Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service |
ASTM A 1022-2001 |
混凝土钢筋用刻痕和普通不锈钢钢丝和焊接钢丝的标准规范 |
Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
ASTM A 105/A 105M-1998 |
管道部件用碳素钢锻件 |
Forgings, Carbon Steel for Piping Components |
ASTM A 106-1999 |
高温设备用无缝碳素钢管规范 |
Seamless Carbon Steel Pipe for High-Temperature Service |
ASTM A 108-1999 |
优质冷精整碳钢棒 |
Steel Bars, Carbon, Cold Finished, Quality |
ASTM A 109-1993 |
冷轧碳素钢带 |
Steel, Strip, Carbon, Cold-Rolled |
ASTM A 109/A 109M-2000 |
冷轧碳钢(碳最大百分比0.25)带材标准规范 |
Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
ASTM A 111-1999 |
电话和电报线路用镀锌铁丝规格 |
Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire |
ASTM A 116-2000 |
金属涂覆钢丝编织栏栅网标准规范 |
Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric |
ASTM A 121-1999 |
镀锌刺钢丝 |
Zinc-Coated (Galvanized) Steel Barbed Wire |
ASTM A 123-1989 |
镀锌(热浸镀锌)钢铁产品 |
Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
ASTM A 123/A 123M-2001 |
铁和钢制品镀锌层(热浸镀锌)标准规范 |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
ASTM A 123/A 123Ma-2001 |
钢铁制品镀锌层(热浸镀锌)标准规范 |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
ASTM A 125-1996 |
热处理螺旋形钢弹簧 |
Steel Springs, Helical, Heat Treated |
ASTM A 126-1995 |
阀门、法兰和管配件用灰铁铸件 |
Gray Iron Castings for Valves, Flanges and Pipe Fittings |
ASTM A 128/A 128M-1993 |
钢铸件,奥氏体锰 |
Steel Castings, Austenitic Manganese |
ASTM A 131/A 131M-2001 |
海船用结构钢的标准规范 |
Standard Specification for Structural Steel for Ships |
ASTM A 132-1989 |
钼铁合金 |
Ferromolybdenum |
ASTM A 134-1996 |
电熔(电弧)焊钢管(NPS为16英寸和16英寸以上) |
Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and over) |
ASTM A 135-2001 |
电阻焊钢管标准规范 |
Standard Specification for Electric-Resistance-Welded Steel Pipe |
ASTM A 139-2000 |
电熔(电弧)焊钢管(4英寸以上的)标准规范 |
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
ASTM A 143-2001 |
热浸镀锌结构钢制品防脆裂措施和探测脆裂程序的标准实施规范 |
Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement |
ASTM A 144-1973 |
钨铁合金 |
Ferrotungsten |
ASTM A 146-1964 |
氧化钼制品 |
Molybdenum Oxide Products |
ASTM A 148/A 148M-2001 |
结构用高强度钢铸件标准规范 |
Standard Specification for Steel Castings, High Strength, for Structural Purposes |
ASTM A 153/A 153M-2001 |
钢铁制金属构件上镀锌层(热浸)标准规范 |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
ASTM A 153/A 153Ma-2001 |
钢铁制金属构件上镀锌层(热浸)标准规范 |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
ASTM A 159-1983 |
汽车用灰铁铸件 |
Automotive Gray Iron Castings |
ASTM A 161-1994 |
炼油厂用无缝低碳钢与碳钼钢蒸馏管 |
Seamless Low-Carbon and Carbon-Molybdenum Steel Still Tubes for Refinery Service |
ASTM A 167-1999 |
不锈和耐热铬镍钢板、薄钢板及带材的规范 |
Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip |
ASTM A 176-1999 |
不锈和耐热铬钢板、薄钢板及带材的规范 |
Stainless and Heat-Resisting Chromium Steel Plate, Sheet and Strip |
ASTM A 178/A 178M-1995 |
锅炉用电阻焊接碳素钢和碳锰钢管 |
Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler Tubes |
ASTM A 179/A 179M-1990 |
热交换器和冷凝器用无缝冷拉低碳钢管 |
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM A 181/A 181M-1995 |
普通锻制碳素钢管的规格 |
Forgings, Carbon Steel for General-Purpose Piping |
ASTM A 182/A 182M-2001 |
高温下使用的锻制或轧制的合金钢管法兰、锻制管件、阀门及零件的标准规范 |
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 182/A 182Ma-2001 |
高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件的标准规范 |
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 183-1998 |
钢轨用碳素钢螺栓和螺母 |
Carbon Steel Track Bolts and Nuts |
ASTM A 184/A 184M-2001 |
混凝土加筋用变形钢筋编织网的标准规范 |
Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement |
ASTM A 185-2001 |
混凝土用焊接无节钢丝钢筋的标准规范 |
Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
ASTM A 192/A 192M-1991 |
高压用无缝碳素钢锅炉管 |
Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
ASTM A 193/A 193M-2000 |
高温设备用合金钢和不锈钢螺栓材料的标准规范 |
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
ASTM A 193/A 193Mb-2001 |
高温设备用合金钢和不锈钢螺栓材料的标准规范 |
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
ASTM A 194/A 194M-2000 |
高压设备或高温设备或高压高温设备的螺栓用碳素钢与合金钢螺母的标准规范 |
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both |
ASTM A 194/A 194Ma-2001 |
高压设备或高温设备或高压高温设备的螺栓用碳素钢与合金钢螺母的标准规范 |
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both |
ASTM A 197-1987 |
化铁炉用可锻铸铁 |
Cupola Malleable Iron |
ASTM A 197/A 197M-2000 |
化铁炉可锻铸铁标准规范 |
Standard Specification for Cupola Malleable Iron |
ASTM A 197M-1987 |
化铁炉用可锻铸铁(米制) |
Cupola Malleable Iron (Metric) |
ASTM A 2-1990 |
普通型,带槽和防护型碳素工字钢轨 |
Carbon Steel Girder Rails of Plain, Grooved and Guard Types |
ASTM A 20/A 20M-2001 |
压力容器用钢板一般要求的标准规范 |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
ASTM A 20/A 20Mb-2001 |
压力容器用钢板一般要求的标准规范 |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
ASTM A 200-1994 |
炼油厂用无缝中级合金钢蒸馏管 |
Seamless Intermediate Alloy-Steel Still Tubes for Refinery Service |
ASTM A 202/A 202M-1993 |
压力容器用铬锰硅合金钢板 |
Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon |
ASTM A 203/A 203M-1997 |
压力容器用镍合金钢板 |
Pressure Vessel Plates, Alloy Steel, Nickel |
ASTM A 204/A 204M-1993 |
压力容器用钼合金钢板 |
Pressure Vessel Plates, Alloy Steel, Molybdenum |
ASTM A 209/A 209M-1998 |
无缝碳钼合金钢锅炉和超热管规范 |
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
ASTM A 21-1994 |
铁路用未经热处理和经热处理的碳素钢轴 |
Carbon Steel Axles, Non-Heat-Treated and Heat-Treated for Railway Use |
ASTM A 210/A 210M-1996 |
锅炉和过热器用无缝中碳素管 |
Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
ASTM A 213/A 213M-2001 |
锅炉、过热器和换热器用无缝铁素体和奥氏体合金钢管的标准规范 |
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 213/A 213Ma-2001 |
锅炉、过热器和换热器用无缝铁素体和奥氏体合金钢管的标准规范 |
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 214/A 214M-1996 |
热交换器与冷凝器用电阻焊接碳素钢管 |
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM A 216/A 216M-1993 |
高温下使用的适合于熔焊的碳素钢铸件规格 |
Steel Castings, Carbon, Suitable for Fusion Welding for High Temperature Service |
ASTM A 217/A 217M-2002 |
高温设备受压零件用合金钢和马氏体不锈钢铸件标准规范 |
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
ASTM A 220-1988 |
珠光体可锻铁 |
Pearlitic Malleable Iron |
ASTM A 220/A 220M-1999 |
珠光体可锻铸铁 |
Pearlitic Malleable Iron |
ASTM A 220M-1988 |
珠光体可锻铁(米制) |
Pearlitic Malleable Iron (Metric) |
ASTM A 225/A 225M-1993 |
压力容器用锰矾镍合金钢板 |
Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |