标准号 |
中文名称 |
英文名称 |
| ANSI/ASTM D 1755-2001 |
聚氯乙烯树脂规范(08.02) |
Specification for Poly(Vinyl Chloride) Resins |
| ANSI/ASTM D 1758-1996 |
用木桩现场试验评定木材防腐剂的试验方法 |
Test Method for Evaluating Wood Preservatives by Field Tests with Stakes |
| ANSI/ASTM D 1760-2001 |
木材产品的压力处理规范 |
Specification for Pressure Treatment of Timber Products |
| ANSI/ASTM D 1763-1994 |
环氧树脂规范(08.01) |
Specification for Epoxy Resins (08.01) |
| ANSI/ASTM D 1784-1992 |
刚性聚氯乙烯合成物规范(08.02,08.04) |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds (08.02, 08.04) |
| ANSI/ASTM D 1785-1999 |
聚氯乙烯(PVC)塑料管规范.表40、80和120 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ANSI/ASTM D 1786-2001 |
甲苯二异氰酸盐规范 |
Toluenedisocyanate, Specifications for (08.02) |
| ANSI/ASTM D 1790-1994 |
用冲击法测定塑料薄板的脆化温度的试验方法(08.01) |
Test Method for Brittleness Temperature of Plastic Sheeting by Impact (08.01) |
| ANSI/ASTM D 1796-1983 |
用分离法测定原油和燃料油中水和沉淀的试验方法(05.01) |
Test for Water and Sediment in Crude Oils and Fuel Oils by Centrifuge, Method of (05.01) |
| ANSI/ASTM D 1823-1995 |
用挤压粘度计测定高剪切率下塑料溶胶和有机溶胶的表观粘度的试验方法(08.01) |
Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer (08.01) |
| ANSI/ASTM D 1824-1995 |
用Brookfield粘度计测定低剪切率下塑料溶胶和有机溶胶的表观粘度的试验方法(08.01) |
Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates by Brookfield Viscometer (08.01) |
| ANSI/ASTM D 1830-1994 |
用曲线形电极法测定电绝缘柔性薄板材料的耐热性的试验方法(10.01) |
Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method (10.01) |
| ANSI/ASTM D 1831-1994 |
润滑脂的滚动稳定性的试验方法(05.01) |
Roll Stability of Lubricating Grease, Method of Test for (05.01) |
| ANSI/ASTM D 1832-1987 |
石蜡的过氧化物数目的试验方法(05.01,15.09) |
Test Method for Peroxide Number of Petroleum Wax (05.01, 15.09) |
| ANSI/ASTM D 1833-1987 |
石蜡气味的试验方法(05.01,15.09) |
Odor of Petroleum Wax, Method of Test for (05.01, 15.09) |
| ANSI/ASTM D 1834-1990 |
蜡纸的20-Deg光泽面的试验方法(05.01,15.09) |
Test Method for 20-Deg Specular Gloss of Waxed Paper (05.01, 15.09) |
| ANSI/ASTM D 1835-1991 |
液化石油气规范(05.01) |
Specification for Liquefied Petroleum (LP) Gases (05.01) |
| ANSI/ASTM D 1837-2002 |
液化石油气挥发性的试验方法 |
Test Method for Volatility of Liquefied Petroleum (LP) Gases (05.01) |
| ANSI/ASTM D 1838-1991 |
液化石油气腐蚀的铜带的试验方法(05.01,05.05) |
Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases (05.01, 05.05) |
| ANSI/ASTM D 1839-1991 |
用分光光度测定法测定柴油中戊基硝酸盐的试验方法(05.01) |
Test Method for Amyl Nitrate in Diesel Fuels by Spectrophotometry (05.01) |
| ANSI/ASTM D 1840-2001 |
紫外线分光光度法测定航空涡轮机燃料中萘烃的试验方法 |
Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry, Method of Test for (05.01) |
| ANSI/ASTM D 1867-1997 |
印制线路用镀铜热固层压板规范 |
Specification for Copper-Clad Thermosetting Laminates for Printed Wiring |
| ANSI/ASTM D 187-1994 |
煤油燃烧质量的试验方法 |
Burning Quality of Kerosine, Method of Test for (05.01) |
| ANSI/ASTM D 1881-1998 |
在玻璃器皿中发动机冷却剂起泡倾向的试验方法 |
Test Method for Foaming Tendencies of Engine Coolants in Glassware |
| ANSI/ASTM D 1882-1998 |
汽车用冷却系统化学溶液对车辆有机面漆产生影响的测试方法 |
Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles |
| ANSI/ASTM D 189-2001 |
石油产品的康拉特逊残碳量的试验方法 |
Conradson Carbon Residue of Petroleum Products, Method of Test for (05.01) |
| ANSI/ASTM D 1894-1990 |
塑料薄膜和薄板的静摩擦和动摩擦系数的试验方法(08.02) |
Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (08.02) |
| ANSI/ASTM D 1895-1997 |
塑料材料的表观密度、容积因素和可倾注性的试验方法 |
Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ANSI/ASTM D 1896-1993 |
传递热固化合物模塑样品的实施规程(08.02) |
Transfer Molding Specimens of Thermosetting Compounds, Practice for (08.02) |
| ANSI/ASTM D 1898-1997 |
塑料抽样实施规范 |
Practice for Sampling of Plastics |
| ANSI/ASTM D 1921-2001 |
塑料的粒径(筛析法)的标准试验方法(08.02) |
Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02) |
| ANSI/ASTM D 1922-1994 |
用摆动法测定塑料薄膜和薄板耐撕裂扩展的试验方法(08.01) |
Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by the Pendulum Method (08.01) |
| ANSI/ASTM D 1929-1991 |
塑料燃点特性的试验方法(08.01) |
Test Method for Ignition Properties of Plastics (08.01) |
| ANSI/ASTM D 1931-1994 |
电绝缘用全曲硅橡胶覆层的玻璃布和胶带的规范(10.01) |
Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation (10.01) |
| ANSI/ASTM D 1938-1992 |
用单剪切法测定塑料薄膜和薄板的耐撕裂扩展性的试验方法(08.02) |
Test Method for Tear Propagation Resistance of Plastic Film and Thin Sheeting by a Single-Tear Method (08.02) |
| ANSI/ASTM D 1947-1983 |
液体齿轮润滑剂的荷载容量的试验方法(05.01) |
Load-Carrying Capacity of Fluid Gear Lubricants, Method of Test for (05.01) |
| ANSI/ASTM D 1972-2001 |
塑料90-03第55项的一般标记实施规范 |
Practice for Generic Making of Plastics 90-03 Item 55 (08.01) |
| ANSI/ASTM D 1996-1992 |
用液相色谱法测定低密度聚乙烯中酚醛抗氧化剂和Erucamide slip添加剂的试验方法(08.01) |
Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (08.01) |
| ANSI/ASTM D 2001-1992 |
汽油和矿物油的脱戊烷的试验方法(05.01) |
Test Method for Depentanization of Gasoline and Naphthas (05.01) |
| ANSI/ASTM D 2002-1993 |
从低烯石油精中分离代表性饱和部分的试验方法(05.01) |
Test Method for Isolation of Representative Saturates Fraction from Low-Olefinic Petroleum Naphthas (05.01) |
| ANSI/ASTM D 2003-1993 |
从高烯石油精中分离代表性饱和部分的试验方法(05.01) |
Test Method for Isolation of Representative Saturates Fraction from High-Olefinic Petroleum Naphthas (05.01) |
| ANSI/ASTM D 2007-2001 |
用粘土胶吸收色谱法测定橡胶膨胀剂和加工油以及石油的特性集的试验方法(05.01) |
Test Method for Characteristic Groups in Rubber Extender and Processing Oils and other Petroleum Derived Oils by the Clay-Gel Absorption Chromatographic Method (05.01) |
| ANSI/ASTM D 2008-1991 |
石油产品的紫外线吸收能力的试验方法(05.01) |
Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products (05.01) |
| ANSI/ASTM D 2010-2001 |
用二氧化铅技术评价空气中总硫酸盐活性的试验方法 |
Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| ANSI/ASTM D 2017-1996 |
木材抗自然腐烂的加速实验室试验的试验方法 |
Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods |
| ANSI/ASTM D 202-1992 |
电绝缘用未处理纸的取样和测试方法 |
Methods of Sampling and Testing Untreated Paper Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 2067-1992 |
测量重型柴油发动机中油的消耗、活塞沉积和磨损的试验方法.NTC-400程序(06.02) |
Test Method for Measurement of Oil Consumption, Piston Deposits, and Wear in a Heavy-Duty High-Speed Diesel Engine - NTC-400 Procedure (06.02) |
| ANSI/ASTM D 2068-1991 |
馏出燃料油的过滤器阻塞倾向的试验方法(05.01) |
Test Method for Filter Blocking Tendency of Distillate Fuel Oils (05.01) |
| ANSI/ASTM D 2069-1991 |
船用燃料油规范(05.01) |
Specification for Marine Fuel (05.01) |
| ANSI/ASTM D 2070-1991 |
液压油的热稳定性的试验方法(05.01) |
Method for Thermal Stability of Hydraulic Oils (05.01) |
| ANSI/ASTM D 2085-1996 |
溶液或木材中计算五氯苯酚用氯化物测定的试验方法 |
Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method) |
| ANSI/ASTM D 2103-1992 |
聚乙烯薄膜和薄板规范(08.01) |
Specification for Polyethylene Film and Sheeting (08.01) |
| ANSI/ASTM D 2104-2001 |
聚乙烯(PE)塑料管规范.表40 |
Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 |
| ANSI/ASTM D 2105-2001 |
纤维玻璃径向拉伸特性的试验方法 |
Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ANSI/ASTM D 2109-2002 |
卤化有机溶剂及其混合物中不挥发物质的测试方法 |
Test Method for Nonvolatile Matter in Halogenated Organic Solvents and their Admixtures |
| ANSI/ASTM D 2115-1992 |
聚氯乙烯成份的炉热稳定性(X-15-371-1)92-03项目18(08.02) |
Oven Heat Stability of Poly(Vinyl Chloride) Compositions (X-15-371-1) 92-03 Item 18 (08.02) |
| ANSI/ASTM D 2116-1995 |
FEP碳氟模塑和挤塑材料规范(08.01) |
Specification for FEP-Fluorocarbon Molding and Extrusion Materials (08.01) |
| ANSI/ASTM D 2126-1995 |
刚性多孔塑料耐热、耐潮和耐老化性的试验方法(08.02) |
Response of Rigid Cellular Plastics to Thermal and Humid Aging, Test Method for (08.02) |
| ANSI/ASTM D 2132-1998 |
电绝缘材料的尘雾痕迹和耐腐蚀的试验方法 |
Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials |
| ANSI/ASTM D 2143-1995 |
增强的热固塑料管循环压力强度的试验方法(08.04) |
Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe (08.04) |
| ANSI/ASTM D 2151-1995 |
用橡胶合成成份测定聚氯乙烯成份的试验方法(08.02) |
Test Method for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients (08.02) |
| ANSI/ASTM D 2156-1994 |
测定馏出燃料中油气的烟密度的试验方法(05.02) |
Smoke Density in the Flue Gases from Distillate Fuels, Method of Test for (05.02) |
| ANSI/ASTM D 2157-1994 |
测定燃烧的燃料中油气的烟密度的效应的试验方法(05.01) |
Effect of Air Supply on Smoke Density in Fuel Gases from Burning Distillate Fuel, Test for (05.01) |
| ANSI/ASTM D 2158-1992 |
液化石油气中残留物的试验方法(05.01) |
Residues in Liquefied Petroleum (LP) Gases, Method of Test for (05.01) |
| ANSI/ASTM D 2159-1993 |
用折射截取法测定饱和馏分中的矿物油的试验方法(05.01) |
Naphthenes in Saturates Fractions by Refractivity Intercept, Method of Test for (05.01) |
| ANSI/ASTM D 2160-1992 |
液压液的热稳定性的试验方法(05.01) |
Thermal Stability of Hydraulic Fluids, Methods of Test for (05.01) |
| ANSI/ASTM D 2161-1987 |
动粘度向赛氏通用粘度或赛氏厚油粘度的转换的试验方法(05.01,10.03) |
Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity, Method for (05.01, 10.03) |
| ANSI/ASTM D 2162-1991 |
标准粘度计的基本校准方法和粘性油标准(05.01) |
Method for Basic Calibration of Master Viscometer and Viscosity Oil Standards (05.01) |
| ANSI/ASTM D 2163-1991 |
用气相色谱法分析液化石油气和丙烷浓度的试验方法(05.01) |
Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propane Concentrates by Gas Chromatography (05.01) |
| ANSI/ASTM D 217-1988 |
润滑脂的圆锥贯入试验方法 |
Cone Penetration of Lubricating Grease, Method of Test for (05.01) |
| ANSI/ASTM D 2222-1994 |
氯乙烯树脂的甲醇萃取的试验方法(X-15-393)(08.01) |
Test Method for Methanol Extract of Vinyl Chloride Resins (X-15-393) (08.01) |
| ANSI/ASTM D 2235-2001 |
ABS塑料管道和配件的溶剂水泥规范 |
Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ANSI/ASTM D 2239-2001 |
控制内径的聚乙烯(PE)塑料管(SIDR-PR)规范 |
Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
| ANSI/ASTM D 2265-1994 |
大温度范围的润滑脂的滴定点的试验方法(05.01) |
Dropping Point of Lubricating Grease of Wide Temperature Range, Method of Test for (05.01) |
| ANSI/ASTM D 2266-2001 |
润滑脂的耐磨损特性的试验方法(四球法) |
Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) (05.01) |
| ANSI/ASTM D 2268-1993 |
用毛细管气相色谱法分析高纯度n-庚烷和异辛烷的方法(05.01) |
Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography, Method for (05.01) |
| ANSI/ASTM D 2269-1988 |
用紫外线吸收法评价白色矿物油的方法(05.01) |
Evaluation of White Mineral Oils by Ultraviolet Absorption, Method for (05.01) |
| ANSI/ASTM D 2270-1991 |
40℃和100℃时动粘度中粘度指数的方法(05.01) |
Method for Calculating Viscosity Index from Kinematic Viscosity at 40?and 100鳦 (05.01) |
| ANSI/ASTM D 2271-1986 |
初步检验液压液(磨损试验)的方法(05.01) |
Preliminary Examination of Hyrdaulic Fluids (Wear Test), Practice for (05.01) |
| ANSI/ASTM D 2272-1985 |
用转式储气瓶测定蒸气涡轮机油氧化稳定性的连续性的试验方法(05.01) |
Continuity of Steam-Turbine Oil Oxydation Stability by Rotating Bomb, Method of Test for (05.01) |
| ANSI/ASTM D 2273-1986 |
润滑油痕量沉积的试验方法(05.01) |
Trace Sediment in Lubricating Oils, Method of Test for (05.01) |
| ANSI/ASTM D 2274-1994 |
馏出燃料油的氧化稳定性(加速法)的试验方法(05.01) |
Oxidation Stability of Distillate Fuel Oil (Accelerated Method), Test for (05.01) |
| ANSI/ASTM D 2275-1995 |
表面经过部分放电的实心电绝缘材料的电压耐久性的试验方法(10.01) |
Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01) |
| ANSI/ASTM D 2276-1994 |
用线性抽样法测定航空燃料中颗粒污染物的试验方法(05.01) |
Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling (05.01) |
| ANSI/ASTM D 2278-1996 |
现场评定圆柱形试样中木材防腐剂的方法 |
Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens |
| ANSI/ASTM D 2287-2001 |
非刚性氯乙烯聚合物和共聚物模塑和挤压复合物(X-15-360)第19项(X-15-372-1)规范 |
Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds (X-15-360) Item 19 (X-15-372-1) (08.02) |
| ANSI/ASTM D 2288-2001 |
加热时增塑剂的重量损耗的试验方法(X-15-373-1) |
Test Method for Weight Loss of Plasticizers on Heating (X-15-373-1) (08.02) |
| ANSI/ASTM D 229-2001 |
电绝缘用硬质薄板及板材的试验方法 |
Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ANSI/ASTM D 2305-1995 |
电绝缘用聚合薄膜的试验方法(94-4,2项)(10.01) |
Test Methods for Polymeric Films Used for Electrical Insulation (94-4, Item 2) (10.01) |
| ANSI/ASTM D 2310-2001 |
机器制造的纤维玻璃规范 |
Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D 2343-1995 |
增强塑料用玻璃纤维股、纱线和粗纱的抗拉特性的试验方法(08.01) |
Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics (08.01) |
| ANSI/ASTM D 2382-1988 |
用弹式量热计测定碳氢燃料的热耗的试验方法(高精度法)(05.02) |
Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method), Test Method for (05.02) |
| ANSI/ASTM D 2383-2001 |
在潮湿条件下测试聚氯乙烯化合物中增塑剂兼容性的试验的实施规范 |
Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds under Humid Conditions (08.02) |
| ANSI/ASTM D 2384-2001 |
丁烷-丁烯混合物中挥发性氯化物的痕量的试验方法(05.01) |
Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| ANSI/ASTM D 2385-1981 |
天然气中硫化氢和硫醇(镉硫碘滴定法)的试验方法(05.05) |
Hydrogen Sulfide and Mercaptan Sulfur in Natural Gas (Cadmium Sulfate-lodometric Titration Method) Method of Test for (05.05) |
| ANSI/ASTM D 2386-2001 |
航空燃料的冰点的试验方法(05.01) |
Freezing Point of Aviation Fuels, Method of Test for (05.01) |
| ANSI/ASTM D 2392-1996 |
着色航空汽油的颜色的试验方法(05.01) |
Test Method for Color of Dyed Aviation Gasolines |
| ANSI/ASTM D 2393-1986 |
环氧树脂和相关成分粘度的试验方法(08.02) |
Epoxy Resins and Related Components, Test Method for Viscosity of (08.02) |
| ANSI/ASTM D 2396-1988 |
用转矩流变仪测定聚氯乙烯树脂粉末混合的试验方法(08.02) |
Test Method for Powder-Mix Test for Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02) |
| ANSI/ASTM D 240-1992 |
用氧弹式量热计测定液态烃燃料的燃烧热值的测试方法 |
Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, Method of Test for (05.01) |
| ANSI/ASTM D 2400-1994 |
电绝缘用浸漆玻璃聚酯布的规范(10.01) |
Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 2411-1989 |
预制和成形用乙酸纤维素丁酸酯薄膜和薄板规范(08.02) |
Specification for Cellulose Acetate Butyrate Film and Sheeting for Fabricating and Forming (08.02) |
| ANSI/ASTM D 2420-1991 |
液化石油气中硫化氢的试验方法(乙酸铅法)(05.01) |
Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) (05.01) |
| ANSI/ASTM D 2421-2001 |
从C5和轻质烃类到气体容量、液体容量或重量基的分析变换(05.01) |
Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis (05.01) |
| ANSI/ASTM D 2422-1997 |
工业用液体润滑剂粘度系统的实施规范 |
Viscosity System for Industrial Fluid Lubricants, Practice for (05.01) |
| ANSI/ASTM D 2423-1985 |
蜡纸或纸板上表面蜡的试验方法(05.01,15.09) |
Test Method for Surface Wax on Waxed Paper or Paperboard (05.01, 15.09) |
| ANSI/ASTM D 2425-1988 |
用质谱测定法测定气体的化学成份的试验方法(05.01) |
Chemical Composition of Gases by Mass Spectrometry, Test Method for (05.01) |
| ANSI/ASTM D 2426-1993 |
用气相色谱法测定丁二烯浓缩物中丁二烯二聚物和苯乙烯的试验方法(05.01) |
Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography, Method of Test for (05.01) |
| ANSI/ASTM D 2427-1992 |
用气相色谱法测定汽油中C2到C5烃类的试验方法(05.01) |
Method for Determination of C2 Through C5 Hydrocarbons in Gasoline by Gas Chromatography (05.01) |
| ANSI/ASTM D 2428-1992 |
测定航空液压液的模拟再循环系统的试验方法(05.01) |
Simulative Recirculating System Testing of Aerospace Hydraulic Fluids, Method for (05.01) |
| ANSI/ASTM D 2443-1996 |
电气设备中用作挽具的绑束绳和带的试验方法 |
Methods of Testing Lacing Twines and Tapes Used as Harnesses in Electrical Equipment |
| ANSI/ASTM D 2447-2001 |
以外径尺寸为基准的聚乙烯(PE)塑料管规范.表40和80 |
Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter |
| ANSI/ASTM D 2457-1997 |
塑料薄膜和薄板镜面光泽的测试方法 |
Test Method for Specular Gloss of Plastic Film and Sheeting |
| ANSI/ASTM D 246-1996 |
杂酚油和杂酚油-煤焦油溶液的蒸馏方法 |
Method for Distillation of Creosote and Creosote Coal Tar Solutions |
| ANSI/ASTM D 2463-1995 |
吹模热塑性容器的耐跌落冲击的试验方法(08.02) |
Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers (08.02) |
| ANSI/ASTM D 2466-2001 |
聚氯乙烯塑料管道配件规范.方案40 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| ANSI/ASTM D 2467-2001 |
套管型聚氯乙烯(PVC)塑料管道配件规范,方案80 |
Specification for Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ANSI/ASTM D 2471-1994 |
反应性热固性树脂的凝胶时间和最高防热温度的试验方法(08.02) |
Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02) |
| ANSI/ASTM D 2481-1996 |
用小尺寸样品加速评定船用木材防腐剂的方法 |
Method for Accelerated Evaluation of Wood Preservatives for Marine Service by Means of Small-Size Specimens |
| ANSI/ASTM D 2484-1994 |
聚脂薄膜压力规范.敏感性电绝缘(10.01) |
Specification for Polyester Film Pressure - Sensitive Electrical Insulating (10.01) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com