标准号 |
中文名称 |
英文名称 |
ASTM D 6047-1999 |
EPTM三原共聚物中ENB生橡胶测定的标准试验方法 |
Standard Test Methods for Rubber, Raw-Determination of 5-Ethylidenenorbornene (ENB) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
ASTM D 6048-1996 |
生橡胶,非硫化橡胶和热塑弹性体的拉伸放松试验的标准操作 |
Standard Practice for Stress Relaxation Testing of Raw rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers |
ASTM D 6049-1996 |
通过平行板之间压缩的橡胶化合物和非含硫生橡胶黏性和弹性的橡胶特性测定的标准试验方法 |
Standard Test Method for Rubber Property-Measurement of the viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
ASTM D 605-1982 |
硅酸镁颜料(滑石) |
Magnesium Silicate Pigment (Talc) |
ASTM D 6050-1997 |
有机液体有害废物中不溶固体测定的标准试验方法 |
Standard Test Method for Determination of Insoluble Solids in organic Liquid Hazardous Waste |
ASTM D 6051-1996 |
环境废物管理活动现场次级取样和复合取样的标准指南 |
Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
ASTM D 6052-1997 |
通过能量分散X-射线荧光性对液体有害废物制备和素分析的标准试验方法 |
Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence |
ASTM D 6053-2000 |
电绝缘漆中挥发有机化合物含量测定的标准试验方法 |
Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes |
ASTM D 6054-1997 |
试验用调整电气绝缘材料的标准操作规程 |
Standard Practice for Conditioning Electrical Insulating Materials for Testing |
ASTM D 6055-1996 |
统一负载和大型航运箱和装货箱机械化处理的标准试验方法 |
Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
ASTM D 6056-1996 |
用传输电子显微技术对工作地点环境中气载单晶陶瓷细丝的浓度测定的标准试验方法 |
Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environement by Transmission Electron Microscopy |
ASTM D 6057-1996 |
用差显微镜对工作区环境空中晶体陶瓷接触须测定浓度的标准试验方法 |
Standard Test Method for Determining Concentration of airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microsc |
ASTM D 6058-1996 |
工作区环境内空中单晶陶瓷接触须测定浓度的标准操作 |
Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment |
ASTM D 6059-1996 |
用扫描电子显微技术对工作地点环境中气载单晶陶瓷细丝的浓度测定的标准试验方法 |
Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy |
ASTM D 6060-1996 |
便携气相色谱对漏气孔取样的标准操作 |
Standard Practice for Sampling of Process Vents With a portable Gas Chromatograph |
ASTM D 6061-1996 |
可呼吸的气雾剂样品性能评价的标准操作规程 |
Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
ASTM D 6062M-1996 |
与健康有关的气溶胶馏分(米制)的取样人的标准指南 |
Standard Guide for Personal Samplers of Health-Related aerosol Fractions (Metric) |
ASTM D 6063-1996 |
现场工作人员用鼓和类似容器取样的标准指南 |
Standard Guide for Sampling of Drums and Similar containers by Field Personnel |
ASTM D 6064-1996 |
1,1,1,2,3,3,3-庚荧光丙烷(CF3 CHFCF3),HFC-227ea的标准规范 |
Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3 CHFCF3 ) |
ASTM D 6065-2000 |
HFC227ea,1,1,1,2,3,3,3-荧光丙烷的处理,运输和储存的标准操作 |
Standard Practice for Handling, Transporation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3) |
ASTM D 6066-1996 |
液化潜能的评价用砂的常规耐穿透性测定的标准操作规程 |
Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential |
ASTM D 6067-1996 |
环境定位特性用电子锥形透度计使用的标准指南 |
Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization |
ASTM D 6068-1996 |
测定塑料材料J-R曲线的标准试验方法 |
Standard Test Method for Determining J-R Curves of Plastic materials |
ASTM D 6069-2001 |
通过氧化燃烧和还原压力化学发光检测法测定航空用碳氢化合物中痕量氮的标准试验方法 |
Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
ASTM D 607-1982 |
湿磨云母颜料 |
Wet Ground Mica Pigments |
ASTM D 6070-1998 |
预组装的线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性的标准试验方法 |
Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
ASTM D 6071-1996 |
通过石墨反应堆原子吸收光谱对高纯度水中低水平钠的标准试验方法 |
Standard Test Method for Low Level Sodium in High Purity water by Graphite Furnace Atomic Absorption Spectroscopy |
ASTM D 6072-1996 |
土工合成粘土衬垫获得样品的标准指南 |
Standard Guide for Obtaining Samples of Geosynthetic Clay Liners |
ASTM D 6073-1996 |
热固定油墨相对固定性的标准试验方法 |
Standard Test Method for Relative Setting of Heatset printing Inks by the Sinvatrol Tester |
ASTM D 6074-1999 |
烃类润滑基油特性的标准导则 |
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
ASTM D 6075-1997 |
皮革耐裂性的标准试验方法 |
Standard Test Method for Cracking Resistance of Leather |
ASTM D 6076-1997 |
皮革缩小温度的标准试验方法 |
Standard Test Method for Shrinkage Temperature of Leather |
ASTM D 6078-1999 |
通过评估磨损负载下球在圆柱体上的润滑性能评定柴油燃料润滑性的标准试验方法 |
Standard Test Method for Evaluating Lubricity of Diesel fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) |
ASTM D 6079-1999 |
利用高频往复设备(HFRR)评定柴油燃料润滑性的标准试验方法 |
Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFFR) |
ASTM D 608-1990 |
邻苯二甲酸二丁酯 |
Dibutyl Phthalate |
ASTM D 6080-1997 |
液压流体粘滞特性定义的标准操作 |
Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids |
ASTM D 6081-1998 |
润滑剂水中毒性试验的标准操作规程:样品制备和结果判断 |
Standard Practice for Aquatic Toxicity Testing of lubricants: Sample Preparation and Results Interpretation |
ASTM D 6082-2001 |
润滑油高温起泡特性的标准试验方法 |
Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
ASTM D 6083-1997 |
用于屋顶的液态丙烯酸树脂漆涂层的标准规范 |
Standard Specification for Liquid Applied Acrylic Coating used in Roofing |
ASTM D 6084-1997 |
用延性计对沥青材料的弹性恢复的标准试验方法 |
Standard Test Method for Elastic Recovery of bituminuous Materials by Ductilometer |
ASTM D 6085-1997 |
橡胶术语和基本概念样本的标准规范 |
Standard Practice for Sampling in Rubber ing-Terminology and Basic Concepts |
ASTM D 6086-1997 |
碳黑压缩容器指南的标准试验方法 |
Standard Test Methods for Carbon Black-Compressed Volume Index |
ASTM D 6087-1997 |
使用地面穿透雷达对沥青覆盖的混凝土平台评价的标准试验方法 |
Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar |
ASTM D 6089-1997 |
地下水取样过程文件形成的标准指南 |
Standard Guide for Documenting a Ground-Water Sampling Event |
ASTM D 609-2000 |
涂料、清漆、转化涂层和相关覆层产品的测试用冷轧钢板制备的标准实施规范 |
Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
ASTM D 6090-1999 |
软化点树脂标准试验方法(杯球法) |
Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method) |
ASTM D 6091-1997 |
可忽略校准错误的分析方法对99%95%试验室检测评估的标准操作 |
Standard Practice for 99%/95% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error |
ASTM D 6092-1997 |
冲刷控制用石材特定标准尺寸的标准操作规程 |
Standard Practice for Specifying Standard Sizes of Stone for Erosion Control |
ASTM D 6093-1997 |
使用氦气测比重术对颜料涂覆或非挥发性清除物体积百分比的标准试验方法 |
Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
ASTM D 6094-1997 |
评估环境可降解非羊毛织物可堆肥性的标准操作 |
Standard Guide to Assess the Compostability of Environmentally Degradable Nonwoven Fabrics |
ASTM D 6095-1999 |
挤制交联和热塑半导性导体和绝缘防护材料体电阻率的标准试验方法 |
Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials |
ASTM D 6096-1997 |
90&*176C操作的电线和电缆用聚氯乙烯绝缘的标准规范 |
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90&*176C Operation |
ASTM D 6097-2001 |
固体介电绝缘材料中有通气孔的水柱提升的相对阻力测定的标准试验方法 |
Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials |
ASTM D 6097a-2001 |
固体介电绝缘材料中有通气孔的水柱提升的相对阻力测定的标准试验方法 |
Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials |
ASTM D 6098-1997 |
由聚碳酸酯PC制成的挤压铸模形材的标准规范 |
Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
ASTM D 6099-1997 |
聚氨酯原材料的标准试验方法:中酸度至高酸度芳香异氰酸酯酸度的测定 |
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
ASTM D 61-1975 |
硬沥青的软化点的试验方法(水中方块试验法) |
Test Method for Softening Point of Pitches (Cube-in-Water Method) |
ASTM D 610-2001 |
涂漆钢表面锈蚀程度评价的标准试验方法 |
Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces |
ASTM D 6100-1997 |
挤压铸模乙缩醛型材的标准规范 |
Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM) |
ASTM D 6101-1997 |
通过图像分析对纸浆,纸和纸板内污垢的等值黑色面积(EBA)的标准试验方法 |
Standard Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis |
ASTM D 6102-1997 |
土工合成粘土衬垫的安装的标准指南 |
Standard Guide for Installation of Geosynthetic Clay Liners |
ASTM D 6103-1997 |
控制的低强度材料的流动连续性(CLSM)的标准试验方法 |
Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) |
ASTM D 6104-1997 |
主要用于表面流量的油/水分离器的性能测定的标准操作规程 |
Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off |
ASTM D 6105-1997 |
粘性结合塑料的电气放电表面处理应用的标准操作规程 |
Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding |
ASTM D 6106-1997 |
地下蓄水层术语建立的标准指南 |
Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers |
ASTM D 6107-1997 |
用于照明装置的发动机天线的防漏光附加物的标准规范 |
Standard Specification for Stop-Leak Additive for Engine ants Used in Light Duty Service |
ASTM D 6108-1997 |
塑料层材和形材压缩特性的标准试验方法 |
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
ASTM D 6109-1997 |
未增强和增强的塑料层材的柔韧特性的标准试验方法 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber |
ASTM D 611-2001 |
石油产品和烃类溶剂苯胺点和混合苯胺点的标准试验方法 |
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents |
ASTM D 6110-1997 |
塑料凹口样品耐摆锤冲击性测定的标准试验方法 |
Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics |
ASTM D 6111-1997 |
通过代替对塑料层材和形材特殊重量和体密度的标准试验方法 |
Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement |
ASTM D 6112-1997 |
塑料层材和型材压缩的和柔性的蠕变和蠕变破裂的标准试验方法 |
Standard Test Methods for Compressive and Flexural creep and Creep-Rupture of Plastic Lumber and Shapes |
ASTM D 6113-1999 |
使用锥形量热计对包含在电缆或光缆中的绝缘材料的燃烧试验反应特性测定的标准试验方法 |
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
ASTM D 6114-1997 |
沥青橡胶粘结剂的标准规范 |
Standard Specification for Asphalt-Rubber Binder |
ASTM D 6115-1997 |
非单向纤维增强多聚物基质复合物模式1疲劳分层作用增长开始的标准试验方法 |
Standard Test Method for Mode I Fatigue Delamination Growth onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 6116-1997 |
阻塞皮革的标准试验方法 |
Standard Test Method for Blocking Leather |
ASTM D 6117-1997 |
塑料成材和形材内机械紧固件的标准试验方法 |
Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes |
ASTM D 6119-1997 |
团纱地板覆盖物由足摩擦产生明显表面变化的标准操作 |
Standard Practice for Creating Surface Appearance Changes of Pile Yarn Floor Covering from Foot Traffic |
ASTM D 611b-2001 |
石油产品和烃类溶剂苯胺点和混合苯胺点的标准试验方法 |
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents |
ASTM D 612-1988 |
石蜡中可碳化物质的试验方法 |
Test Method for Carbonizable Substances in Paraffin Wax |
ASTM D 6120-1997 |
室温下阳极和阴极碳材料电阻的标准试验方法 |
Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature |
ASTM D 6121-2001 |
用终端偏轴伞齿轮驱动轴在低速和高扭矩条件下评估润滑油承载能力的标准试验方法 |
Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
ASTM D 6122-2001 |
多工艺红外分光光度计确认的标准实施规范 |
Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers |
ASTM D 6123/D 6123M-1997 |
轻载包装和一般遮蔽用途的压敏带的标准规范 |
Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
ASTM D 6124-2001 |
医用手套上残留粉末的标准试验方法 |
Standard Test Method for Residual Powder on Medical Gloves |
ASTM D 6125-1997 |
纸和纸板耐弯曲性的标准试验方法(GURLEY型试验机) |
Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) |
ASTM D 6126-1997 |
HFC-23(三氟甲烷)的标准规范 |
standard Specification for HFC-23 (Trifluoromethane, CHF3) |
ASTM D 6127-1997 |
HFC-23(三氟甲烷)的运输和储存,处理的标准操作规程 |
Standard Practice for Handling; Transportation, and Storage of HFC-23 (FE-13TM, Trifluoromethane, CHF3) |
ASTM D 6128-1997 |
使用JENIKE剪切小室对散装固体的标准剪切试验方法 |
Standard Shear Testing Method for Bulk Solids Using the Jenike Shear Cell |
ASTM D 6129-1997 |
通过原子吸收光谱术对发动机冷却剂浓缩物中硅的标准试验方法 |
Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
ASTM D 613-2001 |
柴油的十六烷值标准测试方法 |
Standard Test Method for Cetane Number of Diesel Fuel Oil |
ASTM D 6130-1997 |
通过感应耦合等离子-原子发散光谱术对发动机冷却剂中硅和其它素测定的标准试验方法 |
Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM D 6131-1997 |
钛二氧化物颜料相对着色度评估的标准试验方法 |
Standard Test Method for Evaluating the Relative Tint rtone of Titanium Dioxide Pigments |
ASTM D 6132-1997 |
使用超声波对适用于混凝土有机涂层的干膜厚度的非损测量的标准试验方法 |
Standard Test Method for Nondestructive Measurement of Dry film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic |
ASTM D 6133-2000 |
直接注入一气相色谱测定原材料、树脂、涂层、水可减少性涂料和溶剂可减少性涂料中丙酮、p-三氟氯苯、乙酸甲酯或t-乙酸丁酯含量的标准试验方法 |
Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solvent-Reducible and Water-Reducible Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
ASTM D 6134-1997 |
用于防水系统的硫化橡胶片的标准规范 |
Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems |
ASTM D 6135-1997 |
自黏改良沥青防水应用的标准操作规程 |
Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing |
ASTM D 6136-1997 |
用真空法对非饱和的(干的)毛毡的煤油数量测定的标准试验方法 |
Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method |
ASTM D 6137-1997 |
燃气脱硫系统用聚合衬垫的耐硫酸性的标准试验方法 |
Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM D 6138-1997 |
在动态潮湿条件下润滑油脂防腐蚀特性测定的标准试验方法(EMCOR方法) |
Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test) |
ASTM D 6139-2000 |
用Gledhill摇瓶测定润滑剂或其化合物需氧水中生物降解性的标准试验方法 |
Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask |
ASTM D 6140-1997 |
测定全幅沥青铺面用铺设物中沥青滞留的标准试验方法 |
Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
ASTM D 6141-1997 |
与液体化学兼容的土工合成粘土衬垫的粘土部分筛选的标准指南 |
Standard Guide for Screening the Clay Portion of a Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids |
ASTM D 6142-1997 |
用毛细管气相色谱对苯酚分析的标准试验方法 |
Standard Test Method for Analysis of Phenol by Capillary Gas chromatography |
ASTM D 6143-1997 |
双酚A中铁含量的标准试验方法 |
Standard Test Method for Iron Content of Bisphenol A (Isopropylidenediphenol) |
ASTM D 6144-1997 |
用毛细管气相色谱对AMS分析的标准试验方法 |
Standard Test Method for Analysis of AMS by Capillary Gas Chromatography |
ASTM D 6145-1997 |
检测分水界沉积的标准指南 |
Standard Guide for Monitoring Sediment in Watersheds |
ASTM D 6146-1997 |
检测分水界水溶氮的标准指南 |
Standard Guide for Monitoring Aqueous Nutrients in Watersheds |
ASTM D 6147-1997 |
硫化橡胶和热塑弹性体压缩情况下强制腐坏(应力放松)的测定的试验方法 |
Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 6148-1997 |
黏性材料的分离和检验的标准操作规程 |
Standard Practice for the Separation and Examination of Stickies |
ASTM D 6149-1997 |
由回收纤维中生产的包括新闻纸的新闻纸的标准规范 |
Standard Specification for Newsprint Including Newsprint Manufactured from Recycled Fiber |
ASTM D 6150-1997 |
由于挥发导致的塑料溶胶和有机溶胶的估计加工损失的标准试验方法 |
Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
ASTM D 6151-1997 |
地质技术勘探和土壤取样用空茎轴螺旋钻使用的标准操作规程 |
Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling |
ASTM D 6152-1999 |
用于屋顶的SEBS改良清理沥青的标准规范 |
Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing |
ASTM D 6153-1997 |
桥梁平台防水膜系统用材料的标准规范 |
Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems |
ASTM D 6154-1997 |
用于人行道建造的化学改良沥青水泥的标准规范 |
Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction |
ASTM D 6155-2001 |
沥青铺路混合物用非传统粗集料的标准规范 |
Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures |
ASTM D 6156-1997 |
高性能液相色谱反向使用的标准操作规程 |
Standard Practice for Use of Reversed-Phase High Performance Liquid Chromatographic Systems |
ASTM D 6157-1997 |
用于突然释放的油/水分离器性能测定的标准操作规程 |
Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release |
ASTM D 6158-1997 |
矿物液压油的标准规范 |
Standard Specification for Mineral Hydraulic Oils |