标准号 |
中文名称 |
英文名称 |
ASTM E 1171-2001 |
在循环温度和湿度环境下光电模数的标准试验方法 |
Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
ASTM E 1172-1987 |
波长扩散X射线分光仪的描述和规定 |
Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
ASTM E 1173-2001 |
评定手术前和导管插入术前或注射前皮肤处理的标准试验方法 |
Standard Test Method of a Evaluation of a Preoperative, Precatheterization, or Preinjection Skin Preparations |
ASTM E 1174-1994 |
评价卫生保健人员洗手模式的测试方法 |
Test Method for Evaluation of Health Care Personnel Handwash Formulation |
ASTM E 1175-1987 |
用大直经积分球测定材料的太阳能或光反射性,透明性和吸收性的试验方法 |
Test Method for Determining Solar or Photopic Reflectance, Transmittance and Absorptance of Materials Using a Large Diameter Integrating Sphere |
ASTM E 1177-1998 |
防冻级乙二醇 |
Anti-Freeze Grade Ethylene Glycol |
ASTM E 1178-1997 |
丙烯腈分析的测试法 |
Test Methods for Analysis of Acrylonitrile |
ASTM E 1179-1987 |
敞开式办公室件和系统测试用声源 |
Sound Sources Used for Testing Open Office Components and Systems |
ASTM E 118-1989 |
铜铬合金的化学分析试验方法 |
Test Methods for Chemical Analysis of Copper-Chromium Alloys |
ASTM E 1180-1994 |
宏观结构检验用硫印痕制备 |
Preparing Sulfur Prints for Macrostructural Examination |
ASTM E 1181-1987 |
描述双重粒度特性的测试方法(代替 SAM AMS 2316A) |
Test Methods for Characterizing Duplex Grain Sizes (Superseding SAE AMS 2316A) |
ASTM E 1182-2001 |
用径向切割法测量表层厚度的标准试验方法 |
Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning |
ASTM E 1183-1987 |
为进一步分析用的风干回收废燃料RD-5的试验方法 |
Test Method for Air Drying RDF-5 for Further Analysis |
ASTM E 1184-1998 |
电热(石墨加热炉)原子吸收分析 |
Electrothermal (Graphite Furnace) Atomic Absorption Analysis |
ASTM E 1185-1993 |
为评估在建筑物和建筑系统上投资对经济方法的选择 |
Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
ASTM E 1186-1998 |
建筑物外层漏气的现场检验 |
Air Leakage Site Detection in Building Envelopes |
ASTM E 1187-1997 |
与实验室认可相关的标准术语 |
Standard Terminology Relating to Laboratory Accreditation |
ASTM E 1188-1995 |
通过技术调研人员对信息和物理项进行收集和保存 |
Collection and Preservation of Information and Physical Items by a Technical Investigator |
ASTM E 1189-1987 |
微型滴定管(科赫型) |
Micro-Burets (Koch Style) |
ASTM E 119-2000 |
建筑结构和材料防火试验的标准试验方法 |
Standard Test Methods for Fire Tests of Building Construction and Materials |
ASTM E 1190-1995 |
安装在结构构件中的传动粉料扣件强度的试验方法 |
Test Methods for Strength of Powder-Actuated Fasteners Installed in Structural Members |
ASTM E 1191-1997 |
用海水糠虾进行生命周期毒性试验指南 |
Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
ASTM E 1192-1997 |
用鱼、大型无脊椎动物和两栖动物身上流出的含水物质进行剧毒试验 |
Conducting Acute Toxicity Tests on Aqueous Effluents with Fishes, Macroinvertebrates and Amphibians |
ASTM E 1193-1997 |
用水蚤属magna进行延长生命周期毒性试验 |
Conducting Renewal Life-Cycle Toxicity Tests with Daphnia magna |
ASTM E 1194-1987 |
蒸气压力的试验方法 |
Test Method for Vapor Pressure |
ASTM E 1195-1987 |
测量土壤和沉积物中有机化学药物吸收常数(Koc)的试验方法 |
Test Method for Determining a Sorption Constant (Koc) for an Organic Chemical in Soil and Sediments |
ASTM E 1197-1987 |
进行陆地土壤芯样缩影测试的指南 |
Conducting a Terrestrial Soil-Core Microcosm Test |
ASTM E 1198-1987 |
用泵采集浮流生物 |
Sampling Zooplankton with Pumps |
ASTM E 1199-1987 |
用克--朋氏浮游生物采样器采集浮游生物 |
Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler |
ASTM E 12-1970 |
固体、液体及气体密度和比重的有关术语 |
Terminology Relating to Density and Specific Gravity of Solids, Liquids and Gases |
ASTM E 120-2000 |
钛和钛合金化学分析的标准试验方法 |
Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys |
ASTM E 1200-1987 |
浮游生物防腐 |
Preserving Zooplankton Samples |
ASTM E 1201-1987 |
用圆锥形拖网采集浮游生物 |
Sampling Zooplankton with Conical Tow Nets |
ASTM E 1202-1987 |
开发微核检测标准 |
Development of Micronucleus Assay Standards |
ASTM E 1203-1998 |
含水毒理学中动物试验用作为受试动物食品的海水小虾类 |
Using Brine Shrimp Nauplii as Food for Test Animals in Aquatic Toxicology |
ASTM E 1204-1997 |
食品加工用γ辐射装置在操作和特性上的剂量测定的应用 |
Application of Dosimetry in the Characterization and Operation of a Gamma Irradiation Facility for Food Processing |
ASTM E 1205-1999 |
用高铈-三价铈硫酸剂量仪测定水中的吸收剂量的试验方法 |
Test Method for Using the Ceric-Cerous Sulfate Dosimeter to Measure Absorbed Dose in Water |
ASTM E 1206-1987 |
现有设备的计算机化 |
Computerization of Existing Equipment |
ASTM E 1207-1987 |
腋下除臭剂的感觉评定 |
Sensory Evaluation of Axillary Deodorancy |
ASTM E 1208-1999 |
用亲油的乳化法作荧光液体渗透检验的试验方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Lipophilic Post-Emulsification Process |
ASTM E 1209-1999 |
用可水洗法作荧光液体渗透检验的试验方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Water-Washable Process |
ASTM E 121-1983 |
铜碲合金的化学分析试验方法 |
Test Methods for Chemical Analysis of Copper-Tellurium Alloys |
ASTM E 1210-1999 |
用亲水的乳化法作荧光液体渗透检验的试验方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Hydrophilic Post-Emulsification Process |
ASTM E 1211-1997 |
用表面安装的声辐射探测器作泄漏探测和定位 |
Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ASTM E 1212-1999 |
无损检验机构质量控制体系的建立和维护 |
Establishment and Maintenance of Quality Control Systems for Nondestructive Testing Agencies |
ASTM E 1213-1997 |
热成像系统用可分辨的最小温度差的试验方法 |
Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems |
ASTM E 1214-1987 |
反应堆堆芯压力容器监测用熔丝温度监视器的使用 |
Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE) |
ASTM E 1215-1993 |
测量车辆对道路粗糙度的行车响应用挂车 |
Trailers Used for Measuring Vehicle Response to Road Roughness |
ASTM E 1216-1999 |
用胶带提取法对表面微粒子污染取样的标准规程 |
Standard Practice for Sampling for Particulate Contamination by Tape Lift |
ASTM E 1217-2000 |
用X射线光电子光谱仪和俄歇电子光谱仪测定影响检测信号的样品面积的标准实施规范 |
Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers |
ASTM E 1218-1997 |
用微型海藻作静态96-H毒性试验 |
Conducting Static 96-H Toxicity Tests with Microalgae |
ASTM E 1219-1999 |
用可移动溶剂法作荧光液体渗透检验的试验方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process |
ASTM E 122-1999 |
为估算一批产品或者一次加工过程的制品的质量对样品尺寸的选择的标准规程 |
Standard Practice for Choice of Sample Size to Estimate a Measure of Quality for a Lot or Process |
ASTM E 1220-1999 |
用可移动溶剂法作可视性液体渗透检验的试验方法 |
Test Method for Visible Liquid Penetrant Examination Using the Solvent-Removable Process |
ASTM E 1221-1996 |
测定Kla铁素体钢的平面应变,断裂抑制,破裂韧性的试验方法 |
Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, Kla, of Ferritic Steels |
ASTM E 1222-1990 |
管子护套装置安放损耗的实验室测量用试验方法 |
Test Method for the Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
ASTM E 1224-1994 |
实验室鉴定用试验区分类 |
Categorizing Fields of Testing for Laboratory Acceditation Purposes |
ASTM E 1225-1999 |
通过隔绝--比较--轴向热流技术对固体导热性的试验方法 |
Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique |
ASTM E 1226-2000 |
可燃粉剂用压力和压力提高率的标准试验方法 |
Standard Test Method for Pressure and Rate of Pressure Rise for Combustible Dusts |
ASTM E 1228-1994 |
过氧脂化验分析的测试方法.催化碘滴定法 |
Test Method for Assay of Peroxy Esters - Catalyzed Iodometric Procedure |
ASTM E 1229-1993 |
次氯酸钙 |
Calcium Hypochlorite |
ASTM E 123-1992 |
蒸馏法水分测定装置 |
Apparatus for Determination of Water by Distillation |
ASTM E 1230-1996 |
近似测定无水氟化氢中碳氢化合物低分子量的测试方法 |
Test Method for the Approximate Determination of Low Molecular Weight Hydrocarbons in Anhydrous Hydrogen Fluoride |
ASTM E 1231-2001 |
热不稳定材料危害潜在灵敏值计算的标准实施规程 |
Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials |
ASTM E 1232-1991 |
化学药剂可燃性温度极限的试验方法 |
Test Method for Temperature Limit of Flammability of Chemicals |
ASTM E 1233-1996 |
用循环的静态气压差法测定外窗,护墙及门结构性能的试验方法 |
Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Cyclic Static Air Pressure Differential |
ASTM E 1234-2001 |
宇宙飞船在环境受控区域内使用的不挥发残留物取样板的装卸、运输和安装的标准实施规程 |
Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
ASTM E 1234M-1995 |
在宇宙飞船人工控制环境中使用的挥发残渣取样板的搬运,运输和安装标准试验方法 |
Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
ASTM E 1235M-1995 |
在宇宙飞船人工控制环境中挥发残渣重量测定的标准试验方法(米制) |
Standard Test Method forr Gavimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft (Metric) |
ASTM E 1236-1991 |
作为参照样机的摆锤式冲击试验机的合格证明 |
Qualifying Charpy Impact Machines as Reference Machines |
ASTM E 1237-1993 |
安装耦合电阻应变仪 |
Installing Bonded Resistance Strain Gages |
ASTM E 1238-1997 |
独立计算机系统之间的可转换临床观测 |
Transferring Clinical Observations Between Independent Computer Systems |
ASTM E 1239-1994 |
自动化患者护理信息系统用预约/登记允许,出院,转院系统的描述 |
Description of Reservation/ Registration-Admission, Discharge, Transfer (R-ADT) Systems for Automated Patient Care Information Systems |
ASTM E 124-1994 |
微量化学分析用称重和干燥装置 |
Weighing and Drying Apparatus for Microchemical Analysis |
ASTM E 1240-1988 |
风能转换系统性能的测试方法 |
Test Method for Performance Testing of Wind Energy Conversion Systems |
ASTM E 1241-1998 |
用鱼进行早期生命阶段毒性测试 |
Conducting Early Life-Stage Toxicity Tests with Fishes |
ASTM E 1242-1997 |
用辛醇水分配系数测定鱼因麻醉的中长致死浓度 |
Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis |
ASTM E 1245-1995 |
用自动图象分析测定包括钢和其它金属的含量 |
Determining Inclusion Content of Steel and Other Metals by Automatic Image Analysis |
ASTM E 1246-2001 |
临床实验室计算机系统可靠性报告的标准规程 |
Standard Practice for Reporting Reliability of Clinical Laboratory Computer Systems |
ASTM E 1247-1992 |
用分光光度法在物体色码样品中鉴别荧光粉的测试方法 |
Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry |
ASTM E 1248-1990 |
切碎机防爆 |
Shredder Explosion Protection |
ASTM E 1249-1993 |
用钴60源在硅电子装置的辐射强度试验中最小的剂量测定误差 |
Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources |
ASTM E 125-1963 |
铁铸件的磁粉检验用参考照片 |
Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
ASTM E 1250-1988 |
评估硅电子器件辐射强度试验用钴60辐射源的低能γ成分的电离箱的应用 |
Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices |
ASTM E 1251-1994 |
用氩保护气氛,点对面,单极自激发电容器放电法作铝和铝合金的光辐射光谱测定分析的测试方法 |
Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge |
ASTM E 1252-1998 |
定性红外线分析通用技术 |
General Techniques for Qualitative Infrared Analysis |
ASTM E 1253-1999 |
辐照过的摆锤式冲击试样的复原 |
Reconstitution of Irradiated Charpy Specimens |
ASTM E 1254-1998 |
射线照片和未曝光工业用射线照相胶片的储存 |
Storage of Radiographs and Unexposed Industrial Radiographic Films |
ASTM E 1255-1996 |
射线检查法 |
Radioscopy |
ASTM E 1256-1995 |
辐射式温度计的测试方法(单波段型) |
Test Methods for Radiation Thermometers (Single Waveband Type) |
ASTM E 1257-1993 |
用光谱化学分析法评定表面处理用研磨材料 |
Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis |
ASTM E 1258-1988 |
风扇增压装置气流校正的试验方法 |
Test Method for Airflow Calibration of Fan Pressurization Devices |
ASTM E 1259-2001 |
沸腾温度低于390℃的液体燃料中抗微生物剂评定的标准试验方法 |
Standard Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390?C |
ASTM E 126-1992 |
流体比重计检验和验证的试验方法 |
Test Method for Inspection and Verification of Hydrometers |
ASTM E 1260-1995 |
用光学无图信号光散射仪确定喷射时液滴尺寸特性的测试方法 |
Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Non-Imaging Light-Scattering Instruments |
ASTM E 1261-2000 |
辐射处理用剂量测定体系的选择和校准的标准指南 |
Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing |
ASTM E 1262-1988 |
中国仓鼠卵巢细胞/次黄质鸟嘌呤转磷酸核糖基酶基因变异鉴定的操作 |
Performance of the Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay |
ASTM E 1263-1997 |
哺乳动物骨髓红血球中微细胞核检验的实施 |
Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes |
ASTM E 1264-1998 |
吸音顶棚产品的分类 |
Classification for Acoustical Ceiling Products |
ASTM E 1265-1990 |
气动排气消音器安放损耗测量用试验方法 |
Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers |
ASTM E 1266-1988 |
结构填料和其它结构中用的石灰,飞灰和重金属废料混合物的处理 |
Processing Mixtures of Lime, Fly Ash and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
ASTM E 1268-2001 |
评定显微结构带状物等级或取向的标准实施规范 |
Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures |
ASTM E 1269-2001 |
用差别扫描热量测定仪测定特殊热量的标准试验方法 |
Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry |
ASTM E 127-1998 |
超声波标准铝合金块的制造及检验 |
Fabricating and Checking Aluminum Alloy Ultrasonic Reference Blocks |
ASTM E 1270-1988 |
等臂天平的测试方法 |
Test Method for Equal Arm Balances |
ASTM E 1271-1994 |
热处理钢的摆锤式冲击检验试样的合格化 |
Qualifying Charpy Verification Specimens of Heat-Treated Steel |
ASTM E 1272-1995 |
带刻度的圆柱形容器 |
Graduated Cylinders |
ASTM E 1273-1988 |
可重复使用的实验室移液管的色标 |
Color Coding of Reusable Laboratory Pipets |
ASTM E 1274-1988 |
用验平仪测量路面粗糙度的测试方法 |
Test Method for Measuring Pavement Roughness Using a Profilograph |
ASTM E 1275-1998 |
放射铬箔剂量测定系统的使用 |
Use of a Radiochromic Film Dosimetry System |
ASTM E 1276-1996 |
有机玻璃剂量测定系统的使用 |
Use of a Polymethylmethacrylate Dosimetry System |
ASTM E 1277-1996 |
用ICP(感耦等离子体)氩气等离子体光谱测定法对锌-5%铝-铈合金作化学分析的试验方法 |
Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by the ICP Argon Plasma Spectrometric Method |
ASTM E 1278-1988 |
排除现场跟综退役用放射通道的分类法 |
Radioactive Pathway Methodology for Release of Sites Following Decommissioning |
ASTM E 1279-1989 |
用摇瓶衰减弱法作生物降解的试验方法 |
Test Method for Biodegradation by a Shake-Flask Die-Away Method |
ASTM E 128-1999 |
实验室用刚性多孔过滤器的最大孔隙直经和渗透性的试验方法 |
Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use |
ASTM E 1280-1997 |
哺乳动物细胞诱变性用老鼠淋巴瘤鉴定实施 |
Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity |
ASTM E 1281-1989 |
核设备退役计划 |
Nuclear Facility Decommissioning Plans |
ASTM E 1282-1998 |
规定金属及其合金的化学成分并选择取样的实际操作与定量分析方法 |
Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals and Alloys |
ASTM E 1283-1989 |
计算机综合制造系统的采购 |
Procurement of Computer-Integrated Manufacturing Systems |
ASTM E 1284-1997 |
新生物医学术语结构用疾病分类标准和导则 |
Nosologic Standards and Guides for Construction of New Biomedical Nomenclature |