标准号 |
中文名称 |
英文名称 |
ASTM D 3295-1997 |
聚四氟乙烯管 |
PTFE Tubing |
ASTM D 3296-1998 |
(FEP)氟化乙丙烯-碳氟化合物管 |
FEP-Fluorocarbon Tube |
ASTM D 3299-2000 |
纤维缠绕的玻璃纤维增强热固树脂耐腐蚀容器的标准规范 |
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
ASTM D 330-1993 |
2-丁氧基乙醇 |
2-Butoxyethanol |
ASTM D 3300-1994 |
在脉冲条件下石油成因的绝缘油的电介质击穿电压的试验方法 |
Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions |
ASTM D 3301-2000 |
永久记录的贮存用折叠式文件夹的标准规范 |
Standard Specification for File Folders for Storage of Permanent Records |
ASTM D 3302-2000 |
煤总湿度的标准试验方法 |
Standard Test Method for Total Moisture in Coal |
ASTM D 3305-1994 |
从变压器中抽取气体样品 |
Sampling Gas from a Transformer |
ASTM D 3306-2001 |
汽车及轻型设备用乙二醇基发动机冷却剂的标准规范 |
Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
ASTM D 3307-1993 |
全氟烷氧基(PFA)-碳氟化合物模塑及挤压材料 |
PFA-Fluorocarbon Molding and Extrusion Materials |
ASTM D 3308-1997 |
聚四氟乙烯树脂薄片带 |
PTFE Resin Skived Tape |
ASTM D 3309-1996 |
聚丁烯(PB)塑料热水及冷水分布系统 |
Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems |
ASTM D 331-1995 |
2-乙氧基乙醇 |
2-Ethoxyethanol |
ASTM D 3310-2000 |
测定粘结材料耐腐蚀性的标准试验方法 |
Standard Test Method for Determining Corrosivity of Adhesive Materials |
ASTM D 3311-1994 |
排水、废水及通风(DWV)塑料管配件图样 |
Drain, Waste and Vent (DWV) Plastic Fittings Patterns |
ASTM D 3312-1996 |
无溶剂清漆中活性单体百分比的试验方法 |
Test Method for Percent Reactive Monomer in Solventless Varnishes |
ASTM D 3313-1999 |
炭黑的试验方法.单个炭黑片抗碎强度 |
Test Method Carbon Black - Individual Pellet Crush Strength |
ASTM D 3314-1992 |
橡胶试验方法.丁苯橡胶及苯乙烯增强的胶乳中聚苯乙烯块的化学分析 |
Test Method for Rubber - Chemical Analysis for Polystyrene Blocks in SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices |
ASTM D 3316-1996 |
全氯乙烯对铜的稳定性的试验方法 |
Test Method for Stability of Perchloroethylene with Copper |
ASTM D 3319-2000 |
用英式轮加速抛光集料的标准实施规程 |
Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel |
ASTM D 332-1987 |
白色颜料着色力的试验方法 |
Test Method for Relative Tinting Strength of White Pigments by Visual Observation |
ASTM D 3320-2000 |
乳化煤焦油沥青的标准规范(矿物胶体型) |
Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
ASTM D 3321-1994 |
现场试验测定含水发动机冷却剂凝固点用折射计的使用规程 |
Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
ASTM D 3322-1982 |
预成型金属表面的底漆及二道底漆的试验 |
Testing Primers and Primer Surfacers over Preformed Metal |
ASTM D 3324-2001 |
炭黑的标准实施规程.用ASTM标准炭黑改进检验再生性 |
Standard Practice for Carbon Black-Improving Test Reproducibility Using ASTM Reference Blacks |
ASTM D 3324a-2001 |
炭黑标准规范.用ASTM标准炭黑改进检验还原性 |
Standard Practice for Carbon Black-Improving Test Reproducibility Using ASTM Reference Blacks |
ASTM D 3325-1990 |
水中油样品的保存 |
Preservation of Waterborne Oil Samples |
ASTM D 3326-1990 |
水中油鉴别用样品的制备 |
Preparation of Samples for Identification of Waterborne Oils |
ASTM D 3328-2000 |
气相色谱法比较水中石油润滑油的标准试验方法 |
Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
ASTM D 3329-1999 |
气相色谱法测定甲基异丁基酮纯度的方法 |
Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
ASTM D 333-2001 |
透明漆和着色漆的标准指南 |
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 3330-1996 |
在180度角的条件下压合带的皮层剥离粘着力的试验方法 |
Test Methods for Peel Adhesion of Pressure-Sensitive Tape at 180 Degree Angle |
ASTM D 3330M-1996 |
在180度角的条件下压合带的皮层剥离粘着力的试验方法(米制的) |
Test Methods for Peel Adhesion of Pressure-Sensitive Tape at 180 Degree Angle (Metric) |
ASTM D 3332-1999 |
用冲击机测试产品的机械冲击脆性的试验方法 |
Test Methods of Mechanical-Shock Fragility of Products, Using Shock Machines |
ASTM D 3333-1995 |
试验用人造短纤维、次等化学纤维或亚麻短纤维的取样 |
Sampling Man-Made Staple Fibers, Silver or Tow for Testing |
ASTM D 3335-1985 |
原子吸收光谱法测定涂料中低浓度铅、镉和钴的试验方法 |
Test Method for Low Concentrations of Lead, Cadmium and Cobalt in Paint by Atomic Absorption Spectroscopy |
ASTM D 3336-1997 |
升温下滚珠轴承中润滑脂使用寿命的试验方法 |
Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures |
ASTM D 3337-1991 |
小型滚珠轴承中润滑脂的使用寿命和转矩的测定方法 |
Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings |
ASTM D 3338-1995 |
航空燃料燃烧的有效热的测定方法 |
Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
ASTM D 3339-1995 |
半微量颜色指示剂滴定法测定石油产品酸值的试验方法 |
Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 3340-1998 |
用火焰光度计策动润滑油脂中锂和钠的试验方法 |
Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer |
ASTM D 3341-1991 |
汽油中铅含量的试验方法.氯化碘法 |
Test Method for Lead in Gasoline - Iodine Monochloride Method |
ASTM D 3342-1990 |
新(未经使用的)辊压油在水中分散稳定性的试验方法 |
Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water |
ASTM D 3343-1995 |
航空燃料氢含量的测定方法 |
Test Method for Estimation of Hydrogen Content of Aviation Fuels |
ASTM D 3344-1990 |
波纹面的纸板的总载蜡量的试验方法 |
Test Method for Total Wax Content of Corrugated Paperboard |
ASTM D 3345-1974 |
木材及其他纤维素材料防白蚁破坏的实验室评定方法 |
Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
ASTM D 3346-1990 |
橡胶特性的试验方法.用莫氏粘度计测定SBR(丁苯橡胶)的可加工性 |
Test Methods for Rubber Property - Processability of SBR (Styrene-Butadiene Rubber) with the Mooney Viscometer |
ASTM D 3347-1994 |
包覆型电热原件用电气级氧化镁的流动速率及堆积密度的测试方法 |
Test Method for Flow Rate and Tap Density of Electrical Grade Magnesium Oxide for Use in Sheathed-Type Electric Heating Elements |
ASTM D 3348-1998 |
测试无铅汽油中痕量铅的快速现场试验方法(比色法) |
Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) |
ASTM D 3349-1999 |
用碳黑着色的乙烯聚合材料吸收系数的试验方法 |
Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black |
ASTM D 3350-2002 |
聚乙烯塑料管及其配件用材料的标准规范 |
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
ASTM D 3351-1993 |
塑料薄膜胶凝数值的试验方法 |
Test Method for Gel Count of Plastic Film |
ASTM D 3352-1994 |
微咸水、海水和盐水中锶离子含量的试验方法 |
Test Method for Strontium Ion in Brackish Water, Seawater and Brines |
ASTM D 3353-1998 |
纤维绝缘的磁性金属丝的试验方法 |
Test Methods for Fibrous-Insulated Magnet Wire |
ASTM D 3354-1996 |
用平行板法测量塑料薄膜的粘附负荷的试验方法 |
Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
ASTM D 3359-1997 |
胶带试验测定粘合性的试验方法 |
Test Methods for Measuring Adhesion by Tape Test |
ASTM D 3360-1996 |
流体比重计法测定普通白色体质颜料粒度分布的试验方法 |
Test Method for Particle Size Distribution by Hydrometer of the Common White Extender Pigments |
ASTM D 3361-2001 |
用非滤光碳弧型装置测定涂料和有关涂层的标准实施规程 |
Standard Practice for Unfiltered Open-Flame Carbon-Arc Type of Paint and Related Coatings |
ASTM D 3362-1993 |
气相色谱法测定丙烯酸酯纯度的试验方法 |
Test Method for Purity of Acrylate Esters by Gas Chromatography |
ASTM D 3363-2000 |
铅笔试验测定漆膜硬度的标准试验方法 |
Standard Test Method for Film Hardness by Pencil Test |
ASTM D 3364-1999 |
聚氯乙烯和流变的不稳定热塑性材料流动速率的测试试验方法 |
Test Method for Flow Rates for Poly (Vinyl Chloride) and Rheologically Unstable Thermoplastics |
ASTM D 3366-1995 |
熔融状态下和加热后顺酐和苯酐颜色的试验方法(铂-钴比例) |
Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
ASTM D 3367-1998 |
在离心力作用下聚氯乙烯树脂的增塑剂吸收作用的试验方法 |
Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force |
ASTM D 3368-1999 |
氟化乙丙烯(FEP)-碳氟化合物树脂薄板及薄膜的标准规范 |
Standard Specification for FEP-Fluorocarbon Resin Sheet and Film |
ASTM D 3369-1996 |
四氟乙烯-碳氟化合物树脂浇铸薄膜 |
Polytetrafluoroethylene (PTFE) Resin Cast Film |
ASTM D 3370-1995 |
水的抽样 |
Sampling Water |
ASTM D 3371-1995 |
用气体-液体色层分离法测定溶液中腈含量的试验方法 |
Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography |
ASTM D 3372-1992 |
水中钼含量的试验方法 |
Test Method for Molybdenum in Water |
ASTM D 3373-1993 |
水中钒含量的试验方法 |
Test Method for Vanadium in Water |
ASTM D 3374-1999 |
乙烯涂覆的玻璃丝 |
Vinyl-Coated Glass Yarns |
ASTM D 3375-1995 |
混合粒子层中离子交换材料的柱容量的试验方法 |
Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials |
ASTM D 3376-1988 |
制造电绝缘材料用纸浆的取样及试验的方法 |
Test Methods of Sampling and Testing Pulps to Be Used in the Manufacture of Electrical Insulation |
ASTM D 3377-1996 |
无溶剂清漆重量损失的试验方法 |
Test Method for Weight Loss of Solventless Varnishes |
ASTM D 3379-1975 |
高弹性模数单丝材料的抗拉强度和扬氏模量的试验方法 |
Test Method for Tensile Strength and Youngs Modulus for High-Modulus Single-Filament Materials |
ASTM D 3380-1990 |
塑料基微波电路底板的相对介电常数(介电常数)及损耗因数的试验方法 |
Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates |
ASTM D 3381-1992 |
路面建筑用粘度级沥青胶结剂 |
Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
ASTM D 3382-1995 |
使用电桥技术测量局部放电(电晕)能量及总电荷转移量的方法 |
Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques |
ASTM D 3385-1994 |
用双环渗透仪现场测定土壤渗透率的试验方法 |
Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometers |
ASTM D 3386-1994 |
电绝缘材料的线性热膨胀系数的试验方法 |
Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials |
ASTM D 3387-1983 |
用美国工程兵团回转试验机测定沥青混合料的压实应变特性及剪切应变特性的试验方法 |
Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) |
ASTM D 3389-1994 |
涂层织物的耐磨性的试验方法(旋转台式双头磨蚀机) |
Test Method Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader) |
ASTM D 3393-1991 |
涂层织物.耐水性 |
Coated Fabrics - Waterproofness |
ASTM D 3394-1994 |
电绝缘板的抽样和试验 |
Sampling and Testing Electrical Insulating Board |
ASTM D 3395-1999 |
橡胶变质的试验方法.小室中动态臭氧龟裂的试验 |
Test Methods for Rubber Deterioration - Dynamic Ozone Cracking in a Chamber |
ASTM D 3398-2000 |
集料颗粒形状和构造指数的标准试验方法 |
Standard Test Method for Index of Aggregate Particle Shape and Texture |
ASTM D 3399-1981 |
通用合成洗涤液 |
General-Purpose Synthetic Detergent Liquid |
ASTM D 3400-1985 |
液态硅酸钠 |
Liquid Sodium Silicates |
ASTM D 3401-1997 |
卤化有机溶剂及其掺和物中的水分的试验方法 |
Test Methods for Water in Halogenated Organic Solvents and Their Admixtures |
ASTM D 3402-1993 |
焦炭用滚净筒试验方法 |
Test Method for Tumbler Test for Coke |
ASTM D 3403-1997 |
橡胶的试验方法.IR(异戊橡胶)的评定 |
Test Methods for Rubber - Evaluation of IR (Isoprene Rubber) |
ASTM D 3404-1991 |
拉力计测定渗流区的矩阵势能 |
Measuring Matric Potential in the Vadose Zone Using Tensiometers |
ASTM D 3405-1997 |
混凝土及沥青路面用热灌的接缝密封胶 |
Joint Sealants, Hot-Poured for Concrete and Asphalt Pavements |
ASTM D 3406-1995 |
硅酸盐水泥混凝土路面用弹性体型热处理的接缝密封胶 |
Joint Sealant, Hot-Applied, Elastomeric-Type for Portland Cement Concrete Pavements |
ASTM D 3407-1978 |
混凝土及沥青路面用热灌接缝密封胶的试验 |
Testing Joint Sealants, Hot-Poured for Concrete and Asphalt Pavements |
ASTM D 3409-1993 |
沥青屋顶胶粘剂对潮湿表面、湿表面和水下表面粘着性的试验方法 |
Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet or Underwater Surfaces |
ASTM D 341-1993 |
液体石油产品粘度-温度关系曲线图 |
Viscosity-Temperature Charts for Liquid Petroleum Products |
ASTM D 3410/D 3410M-1995 |
单向的或交叉的纤维树脂混合料的压缩特性的试验方法 |
Test Method for Compressive Properties of Unidirectional or Crossply Fiber - Resin Composites |
ASTM D 3412-1995 |
纱与纱之间摩擦系数的试验方法 |
Test Method for Coefficient of Friction, Yarn to Yarn |
ASTM D 3414-1998 |
水生石油润滑油的红外线光谱比较方法 |
Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy |
ASTM D 3415-1998 |
水中油的识别 |
Identification of Waterborne Oils |
ASTM D 3417-1999 |
通过热分析测定聚合物熔化及结晶热的试验方法 |
Test Method for Heats of Fusion and Crystallization of Polymers by Thermal Analysis |
ASTM D 3418-1999 |
通过热分析测定聚合物热变温度的试验方法 |
Test Method for Transition Temperatures of Polymers by Thermal Analysis |
ASTM D 3419-1993 |
由热固性化合物制的轴向螺杆柱塞并用式铸模试样 |
In-Line Screw-Injection Molding Test Specimens from Thermosetting Compounds |
ASTM D 3420-1995 |
塑料薄膜的耐摆锤式冲击的试验方法 |
Test Method for Pendulum Impact Resistance of Plastic Film |
ASTM D 3423-1984 |
乳化的煤焦油沥青(矿物胶质型)的应用 |
Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
ASTM D 3424-2001 |
印刷品的光照牢度和耐气候性评定的标准试验方法 |
Standard Test Methods for Evaluating the Lightfastness and Weatherability of Printed Matter |
ASTM D 3426-1997 |
用脉冲波法测定固体电绝缘材料的电介质击穿电压及抗电强度的试验方法 |
Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves |
ASTM D 3427-1999 |
石油的放气特性试验方法 |
Test Method for Air Release Properties of Petroleum Oils |
ASTM D 3429-1993 |
低沸点液体中固定气体溶解度的试验方法 |
Test Method for Solubility of Fixed Gases in Low-Boiling Liquids |
ASTM D 3430-1995 |
液态水基透明地板抛光剂的透明度及泛黄度的试验方法 |
Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes |
ASTM D 3432-1989 |
气相色谱法测定氨基甲酸乙酯预聚物和涂料溶液中的游离甲苯二异氰酸酯的试验方法 |
Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by Gas Chromatography |
ASTM D 3433-1999 |
粘结接头中胶粘剂的断裂强度试验 |
Fracture Strength in Cleavage of Adhesives in Bonded Joints |
ASTM D 3434-2000 |
室外潮湿条件用木材胶粘剂的多周期加速老化试验(自动沸腾试验)的标准试验方法 |
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
ASTM D 3436-1999 |
苯胺的抽样和搬运 |
Sampling and Handling Aniline |
ASTM D 3437-1999 |
液体环烃产物的抽样和搬运 |
Sampling and Handling Liquid Cyclic Products |
ASTM D 3438-1999 |
萘,顺丁烯二酐,苯三甲酸酐的抽样和处置方法 |
Sampling and Handling Naphthalene, Maleic Anhydride and Phthalic Anhydride |
ASTM D 344-1997 |
用擦试外规评定法对涂料相对遮盖力的测试方法 |
Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts |
ASTM D 3440-1982 |
水乳化地板擦亮剂制备规格 |
Preparing Specifications for Water-Emulsion Floor Polishes |
ASTM D 3441-1998 |
土壤中深的,类似静止的,锥贯入试验及磨擦锥轮贯入的试验方法 |
Test Method for Deep, Quasi-Static, Cone and Friction-Cone Penetration Tests of Soil |
ASTM D 3442-1991 |
大气中氚气含量的试验方法 |
Test Method for Gaseous Tritium Content of the Atmosphere |