标准号 |
中文名称 |
英文名称 |
ANSI/ASTM D 2898-1996 |
防火试验用经阻燃处理的木材的加速风化方法 |
Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing |
ANSI/ASTM D 2900-1997 |
用于护套式电加热件的电气级氧化镁的加速寿命试验的方法 |
Test Method for Accelerated Life Test of Electrical Grade Magnesium Oxide as Used in Sheathed-Type Electric Heating Elements |
ANSI/ASTM D 2902-1995 |
含氟聚合物树脂热缩管件规范(10.02) |
Specification for Fluoropolymer Resin Heat-Shrinkable Tubing (10.02) |
ANSI/ASTM D 2923-2001 |
聚烯烃薄膜和薄板刚性的试验方法(08.02) |
Test Method for Rigidity of Polyolefin Film and Sheeting (08.02) |
ANSI/ASTM D 2924-2001 |
增强热固性树脂管的耐外压力试验(08.04) |
Reinforced Thermosetting-Resin Pipe, Test Method for External Pressure Resistance of (08.04) |
ANSI/ASTM D 2925-2001 |
在全孔流情况下纤维玻璃(玻璃纤维增强热固树脂)束偏转的试验方法 |
Test Method for Beam Deflection of fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
ANSI/ASTM D 295-1994 |
电绝缘用浸漆棉织物试验方法 |
Method of Testing Varnish Cotton Fabrics Used for Electrical Insulation (10.01) |
ANSI/ASTM D 2951-1995 |
3型和4型耐热应力断裂的聚乙烯塑料的试验方法(95-1,13项)(08.02) |
Test Method for Resistance of Types 3 and 4 Polyethylene Plastics to Thermal Stress-Cracking (95-1, Item 13) (08.02) |
ANSI/ASTM D 2981-1994 |
振动中粘性固体薄膜润滑剂的耐磨损的测量方法(05.02) |
Measuring the Wear Life of Bonded Solid Film Lubricants in Oscillating Motion, Test Method for (05.02) |
ANSI/ASTM D 2982-1985 |
润滑油中使用的乙二醇基防冻剂的检测方法(05.02) |
Detecting Glycol-Base Antifreeze in Used Lubricating Oils, Method of Test for (05.02) |
ANSI/ASTM D 2983-2001 |
用Brookfield粘度计测定机动车试验液体润滑剂的低温粘度的试验方法(05.02) |
Low-Temperature Viscosity of Automotive Test Fluid Lubricants Measured by Brookfield Viscometer, Method of Test for (05.02) |
ANSI/ASTM D 2989-2002 |
卤化有机溶剂及其添加剂的酸碱性的试验方法 |
Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and their Admixtures |
ANSI/ASTM D 2990-2001 |
塑料的张力、压力和柔性蠕变以及蠕变断裂的试验方法(08.02) |
Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics (08.02) |
ANSI/ASTM D 2992-2001 |
纤维玻璃(玻璃纤维增强热固树脂)管件和配件获得静水压或压力设计基础的实施规程(08.04) |
Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (08.04) |
ANSI/ASTM D 2996-2001 |
绕组线纤维玻璃(玻璃纤维增强热固树脂)管件和配件规范(08.04) |
Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe (08.04) |
ANSI/ASTM D 2997-2001 |
纤维玻璃(玻璃纤维增强热固树脂)离心成形规范 |
Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ANSI/ASTM D 3000-1996 |
以外径为基础的聚丁烯塑料管(SDR-PR)规范 |
Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter |
ANSI/ASTM D 3012-1995 |
用双轴旋转器测定丙烯塑料的热氧化稳定性的试验方法(08.02) |
Test Method for Thermal Oxidative Stability of Propylene Plastics, Using a Biaxial Rotator (08.02) |
ANSI/ASTM D 3013-1994 |
环氧模制化合物规范(08.02) |
Specification for Epoxy Molding Compounds (08.02) |
ANSI/ASTM D 3014-1994 |
在垂直位置硬质多孔塑料的火焰高度、燃烧时间和重量损耗的试验方法(08.02) |
Test Method for Flame Height, Time of Burning, and Loss of Weight of Rigid Cellular Plastics in a Vertical Position (08.02) |
ANSI/ASTM D 3015-1995 |
塑料化合物中颜料扩散的微观检验的推荐性方法(08.02) |
Recommended Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (08.02) |
ANSI/ASTM D 3026-1994 |
护套式电气加热件用电气级氧化镁的烧结指数的试验方法(10.02) |
Test Method for Sinter Index of Electrical Grade Magnesium Oxide for Use in Sheathed-Type Electrical Heating Elements (10.02) |
ANSI/ASTM D 3029-1994 |
用撞锤(降落重量)测定硬质多孔塑料薄板或部件的耐冲击性的试验方法(08.02) |
Test Method for Impact Resistance of Rigid Plastic Sheeting or Parts by Means of a Tup (Falling Weight) (08.02) |
ANSI/ASTM D 3030-1995 |
氯乙烯树脂的挥发性物质(包括水)的试验方法(08.02) |
Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins (08.02) |
ANSI/ASTM D 3032-1997 |
连接线绝缘的试验方法(10.02) |
Hookup Wire Insulation, Test Method for (10.02) |
ANSI/ASTM D 3035-2001 |
外径受控的聚乙烯塑料管(SPR-PR)规范 |
Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
ANSI/ASTM D 3084-1996 |
水的a粒子光谱测定法实施规程 |
Practice for Alpha-Particle Spectrometry of Water |
ANSI/ASTM D 3115-1995 |
在高剪切下航空航天合金润滑剂的爆炸性反应的特性的试验方法(05.02) |
Explosive Reactivity of Lubricants with Aerospace Alloys under High Shear, Method of Test for (05.02) |
ANSI/ASTM D 3116-1989 |
汽油中铅含量的痕量的试验方法(05.02) |
Trace Amounts of Lead in Gasoline, Method of Test for (05.02) |
ANSI/ASTM D 3117-1987 |
馏出燃料的蜡的外观点的试验方法(05.02) |
Test Method for Wax Appearance Point of Distillate Fuels (05.02) |
ANSI/ASTM D 3120-1996 |
用氧化微库仑分析法测定轻质液态石油烃类中硫的痕量的试验方法 |
Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry, Method of Test for (05.02) |
ANSI/ASTM D 3123-1994 |
低压热固性模制化合物的螺线流的试验方法(08.02) |
Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds (08.02) |
ANSI/ASTM D 3124-1998 |
用红外光谱测定法测定聚乙烯中乙烯叉不饱和性的试验方法 |
Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
ANSI/ASTM D 3140-1996 |
扩口聚烯烃管规程 |
Practice for Flaring Polyolefin Pipe and Tubing |
ANSI/ASTM D 3144-1995 |
电绝缘用聚乙烯叉氟热缩管件的规范(10.02) |
Specification for Poly (Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation (10.02) |
ANSI/ASTM D 3145-2001 |
用螺旋形线圈法测量电绝缘清漆热耐久性的试验方法 |
Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method |
ANSI/ASTM D 3147-1999 |
发动机冷却剂用止漏添加剂测试的试验方法 |
Test Method for Testing Stop-Leak Additives for Engine Coolants |
ANSI/ASTM D 3150-1995 |
电绝缘用交链和非交链聚氯乙烯热缩管件的规范(10.02) |
Specification for Crosslinked and Noncrosslinked Poly (Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation (10.02) |
ANSI/ASTM D 3154-2001 |
管道中平均流量的试验方法(皮氏流速测定管法) |
Test Method for Average Velocity in a Duct (Pitot Tube Method) |
ANSI/ASTM D 3159-1995 |
改良的ETFE含氟聚合物模塑和挤塑材料规范(08.03) |
Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials (08.03) |
ANSI/ASTM D 3172-1997 |
煤和焦炭的近似分析实施规程 |
Practice for Proximate Analysis of Coal and Coke |
ANSI/ASTM D 3176-1997 |
煤和焦炭的素分析实施规程 |
Practice for Ultimate Analysis of Coal and Coke |
ANSI/ASTM D 3195-1990 |
转子流量计校准的实施规程 |
Practice for Rotameter Calibration |
ANSI/ASTM D 3201-1996 |
防火木材及木制品吸湿特性的试验方法 |
Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products |
ANSI/ASTM D 3214-1997 |
电绝缘用涂料粉末及其涂层的试验方法 |
Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation |
ANSI/ASTM D 322-1992 |
汽油发动机曲轴箱油稀释的试验方法 |
Dilution of Gasoline Engine Crankcase Oils, Method of Test for (05.01) |
ANSI/ASTM D 3221-1988 |
热塑性聚对苯二甲酸酯模塑和挤塑材料规范 |
Specification for Thermoplastic Polyterephthalate Molding and Extrusion Materials |
ANSI/ASTM D 3222-1999 |
未改性的聚偏氟乙烯模塑、挤塑和涂覆材料规范 |
Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding, Extrusion, and Coating Materials (08.03) |
ANSI/ASTM D 3224-1996 |
木材防腐液用辅助溶剂水溶性的试验方法 |
Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions |
ANSI/ASTM D 3225-1996 |
油质防腐剂用低沸点烃类溶剂规范 |
Specification for Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives |
ANSI/ASTM D 3227-1992 |
汽油、煤油、航空涡轮和馏出燃料中硫醇的含量的试验方法(电势滴定法)(05.02) |
Mercaptan Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method), Method of Test for (05.02) |
ANSI/ASTM D 3228-2001 |
用改良的基耶达法测定润滑油中总氮量的试验方法 |
Total Nitrogen in Lubricating Oils by Modified Kjeldahl Method, Method of Test for (05.02) |
ANSI/ASTM D 323-1994 |
石油产品的蒸汽压力的试验方法(瑞德法) |
Vapor Pressure of Petroleum Products (Reid Method), Test Method for (05.01) |
ANSI/ASTM D 3230-1989 |
用电势滴定法测定原油中盐的试验方法(05.02) |
Salts in Crude Oil (Electrometric Method), Test Method for (05.02) |
ANSI/ASTM D 3231-1994 |
测定汽油中磷的试验方法(05.02) |
Phosphorus in Gasoline, Method of Test for (05.02) |
ANSI/ASTM D 3232-1988 |
高温下润滑脂的流量特性的测量方法(05.02) |
Measurement of Flow Properties of Lubricating Greases at High Temperatures, Method for (05.02) |
ANSI/ASTM D 3233-1993 |
液体润滑剂的超高压特性的测量方法(润滑剂耐热耐压法)(05.02) |
Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Methods), Methods for (05.02) |
ANSI/ASTM D 3234-1988 |
蜡覆层耐磨性的试验方法(05.02) |
Abrasion Resistance of Wax Coatings, Test Method for (05.02) |
ANSI/ASTM D 3235-1988 |
石蜡中溶剂性萃取物的试验方法(05.02) |
Solvent Extractables in Petroleum Waxes, Method of Test for (05.02) |
ANSI/ASTM D 3236-1988 |
热熔性胶粘剂和涂层材料的表观密度的试验方法(05.02) |
Apparent Viscosity of Hot Melt Adhesives and Coating Materials, Method of Test for (05.02) |
ANSI/ASTM D 3237-1990 |
用原子吸收光谱测定法测定汽油中铅含量的试验方法(05.02) |
Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02) |
ANSI/ASTM D 3238-1995 |
用n-d-m法对石油进行碳分布和结构组分析的试验方法(05.02) |
Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method, Method of Test for (05.02) |
ANSI/ASTM D 3239-1996 |
用高电离电压质谱法对汽油芳香馏分进行芳香类型分析的试验方法 |
Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry (05.02) |
ANSI/ASTM D 3240-1991 |
测定航空涡轮燃料中不溶解水的试验方法(05.02) |
Test Method for Undissolved Water in Aviation Turbine Fuels (05.02) |
ANSI/ASTM D 3241-2002 |
航空涡轮燃料热氧化稳定性的试验方法(JFTOT程序) |
Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) (05.02) |
ANSI/ASTM D 3242-2001 |
测定航空涡轮燃料总酸度的试验方法(05.02) |
Total Acidity in Aviation Turbine Fuel, Test Method for (05.02) |
ANSI/ASTM D 3244-1997 |
测定符合规范的试验数据的利用(05.02) |
Utilization of Test Data to Determine Conformance with Specifications, Practice for (05.02) |
ANSI/ASTM D 3245-1991 |
工业燃料油的可泵抽性的试验方法(05.02) |
Test Method for Pumpability of Industrial Fuel Oils (05.02) |
ANSI/ASTM D 3246-1981 |
用氧化微库仑分析法测定石油气中硫含量(05.02) |
Sulfur in Petroleum Gas by Oxidative Microcoulometry (05.02) |
ANSI/ASTM D 3251-1995 |
测定薄膜绝缘磁线上用的电绝缘浸漆的热老化特性的试验方法(10.02) |
Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02) |
ANSI/ASTM D 3262-2001 |
增强塑料砂浆排污水管规范(08.04) |
Specification for Reinforced Plastic Mortar Sewer Pipe (08.04) |
ANSI/ASTM D 3266-1991 |
空气中颗粒状酸性气体氟的自动分离和收集的试验方法(双纸带样品法) |
Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
ANSI/ASTM D 3267-1991 |
空气中颗粒状可溶于水气体氟的分离和收集的试验方法(过滤器和空气采集器法) |
Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
ANSI/ASTM D 3268-1991 |
空气中颗粒状可溶于水气体氟的分离和收集的试验方法(碳酸氢钠覆层玻璃管和颗粒过滤器法) |
Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and a Particulate Filter Method) |
ANSI/ASTM D 3270-2001 |
空气和植物组织中氟含量分析的试验方法(半自动法) |
Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
ANSI/ASTM D 3275-1991 |
E-CTFE-含氟聚合物模塑和挤塑材料规范(08.03) |
Specification for E-CTFE-Fluoropolymer Molding and Extrusion Materials (08.03) |
ANSI/ASTM D 3288-1994 |
漆包磁线试验方法(10.02) |
Test Methods for Magnet-Wire Enamels (10.02) |
ANSI/ASTM D 3291-1992 |
压力下聚氯乙烯塑料中增塑剂的兼容性的方法(08.03) |
Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics under Compression (08.03) |
ANSI/ASTM D 3293-1991 |
PTFE树脂模制薄板规范(08.03) |
Specification for PTFE Resin Molded Sheet (08.03) |
ANSI/ASTM D 3294-1997 |
PTFE树脂基础型材规范 |
Specification for PTFE Resin Molded Basic Shapes (08.03) |
ANSI/ASTM D 3295-2001 |
PTFE管规范 |
Specification for PTFE Tubing (08.03) |
ANSI/ASTM D 3296-1991 |
FEP碳氟管规范(08.03) |
Specification for FEP-Fluorocarbon Tubing (08.03) |
ANSI/ASTM D 3297-1988 |
PTFE树脂部件的模制和加工公差的实施规程(08.03) |
Practice for Molding and Machining Tolerances for PTFE Resin Parts (08.03) |
ANSI/ASTM D 3299-1995 |
绕组丝玻璃纤维增强热固树脂耐化学水箱规范(08.04) |
Specification for Filament-Wound Glass Fiber Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
ANSI/ASTM D 3306-2001 |
汽车和轻载装置乙烯乙二醇基引擎冷却剂规范 |
Specification for Ethylene Glycol Base Engine Coolant for Automobile and Light Duty Service |
ANSI/ASTM D 3307-2001 |
PFA碳氟模塑和挤塑材料规范 |
PFA-Fluorocarbon Molding and Extrusion Materials, Specification for (08.03) |
ANSI/ASTM D 3308-1991 |
PTFE树脂切削带规范(08.03) |
Specification for PTFE Resin Skived Tape (08.03) |
ANSI/ASTM D 3309-1996 |
聚丁烯(PB)塑料热水配送系统规范 |
Specification for Polybutylene (PB) Plastic Hot-Water Distribution Systems |
ANSI/ASTM D 3311-1996 |
排水、废水及通风(DWV)塑料管配件图样规范 |
Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns |
ANSI/ASTM D 3336-1991 |
高温下滚珠轴承中润滑脂的有效期的试验方法(05.02) |
Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures (05.02) |
ANSI/ASTM D 3337-1991 |
小型轴承中润滑脂的评价方法(05.02) |
Method for Evaluation of Greases in Small Bearings (05.02) |
ANSI/ASTM D 3338-1992 |
航空燃料热消耗的评价方法(05.02) |
Method for Estimation of Heat of Combustion of Aviation Fuels (05.02) |
ANSI/ASTM D 3339-1995 |
用半微量彩色指示剂滴定法测定酸度总值的试验方法(05.02) |
Total Acid Number by Semi-Micro Color Indicator Titration, Method of Test for (05.02) |
ANSI/ASTM D 3340-1990 |
用火焰光度计测定润滑脂中锂和钠的试验方法(05.02) |
Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (05.02) |
ANSI/ASTM D 3341-1991 |
用氯化碘法测定汽油中铅含量的试验方法(05.02) |
Test Method for Lead in Gasoline-Iodine Monochloride Method (05.02) |
ANSI/ASTM D 3342-1990 |
未用过的冷轧润滑油在水中弥散的乳化稳定性的测量方法(05.02) |
Measuring the Emulsion Stability of New (Unused) Rolling Oil Dispersions in Water, Method of (05.02) |
ANSI/ASTM D 3343-1995 |
航空燃料氢含量的评价方法(05.02) |
Method for Estimation of Hydrogen Content of Aviation Fuels (05.02) |
ANSI/ASTM D 3345-1996 |
木材及其他纤维素材料防白蚁破坏的实验室评定试验方法 |
Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
ANSI/ASTM D 3347-1994 |
护套型电气加热件用电气级氧化镁的流率和堆密度的试验方法(10.02) |
Test Method for Flow Rate and Tap Density of Electrical Grade Magnesium Oxide for Use in Sheathed-Type Electric Heating Elements (10.02) |
ANSI/ASTM D 3348-1992 |
在不含铅汽油中探测铅的快速现场试验规范(比色剂法)(05.02) |
Specification for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (05.02) |
ANSI/ASTM D 3349-1986 |
碳黑加色乙烯塑料薄膜的吸收系数的试验方法(08.03) |
Carbon Black Pigmented Ethylene Plastic Film, Test Method for Absorption Coefficient of (08.03) |
ANSI/ASTM D 3354-1996 |
用平行板法测定塑料薄膜阻挡承载力的试验方法(08.03) |
Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
ANSI/ASTM D 3364-1994 |
聚氯乙烯和流变不稳定的热塑料的流率的试验方法(08.03) |
Test Method for Flow Rates for Poly(Vinyl Chloride) and Rheologically Unstable Thermoplastics (08.03) |
ANSI/ASTM D 3367-1995 |
在离心力下聚氯乙烯树脂的增塑剂吸附作用的试验方法(08.02) |
Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force (08.02) |
ANSI/ASTM D 3368-1994 |
FEP碳氟树脂薄板和薄膜(08.03) |
FEP Fluorocarbon Resin Sheet and Film (08.03) |
ANSI/ASTM D 3369-2001 |
TFE碳氟树脂铸膜规范 |
Specification for TFE-Fluorocarbon Resin Cast Film (08.03) |
ANSI/ASTM D 3382-1995 |
用桥技术测量由于部分放电引起的能量和集成电荷的转换的试验方法(10.02) |
Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques (10.02) |
ANSI/ASTM D 3386-2000 |
电绝缘材料的线性热膨胀系数的试验方法 |
Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials |
ANSI/ASTM D 3394-1994 |
电绝缘板抽样方法(10.02) |
Methods of Sampling and Electrical Insulating Board (10.02) |
ANSI/ASTM D 341-1989 |
液态石油产品的粘度-温度曲线图 |
Viscosity - Temperature Charts for Liquid Petroleum Products (05.01) |
ANSI/ASTM D 3419-1993 |
热固化合物试样的直列式螺旋注入模制方法(08.03) |
In-Line Screw-Injection Molding of Test Specimens from Thermosetting Compounds, Practice for (08.03) |
ANSI/ASTM D 3420-1995 |
塑料薄膜耐动态球充击的试验方法(08.02) |
Test Method for Dynamic Ball Burst (Pendulum) Impact Resistance of Plastic Film (08.02) |
ANSI/ASTM D 3426-1995 |
用冲击波测定实心电绝缘材料的电介质击穿电压和介电强度的试验方法(10.02) |
Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02) |
ANSI/ASTM D 3427-1986 |
石油的气泡分离时间的试验方法(05.02) |
Gas Bubble Separation Time of Petroleum Oils, Test Method for (05.02) |
ANSI/ASTM D 3429-1987 |
低沸点流体中固定气体的可溶性的试验方法(05.02) |
Solubility of Fixed Gases in Low-Boiling Liquids, Method of Test for (05.02) |
ANSI/ASTM D 3453-2001 |
软质泡沫材料规范.家具、汽车软垫、床垫及类似用途用氨基甲酸乙酯 |
Specification for Flexible Cellular Materials - Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications |
ANSI/ASTM D 3454-1997 |
水中镭-226的试验方法 |
Test Method for Radium-226 in Water |
ANSI/ASTM D 3461-1997 |
地沥青和硬沥青软化点试验方法(Mettler杯球法) |
Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-And-Ball Method) |
ANSI/ASTM D 347-1996 |
杂酚油和煤焦油的体积和比重修正表 |
Tables for Volume and Specific Gravity Correction for Creosote and Coal Tar |
ANSI/ASTM D 348-1995 |
用于电绝缘刚性管的测试方法 |
Test Method for Rigid Tubes Used for Electrical Insulation (10.01) |