标准号 |
中文名称 |
英文名称 |
ASTM C 1017-1992 |
生产流态混凝土用化学掺和剂 |
Chemical Admixtures for Use in Producing Flowing Concrete |
ASTM C 1017/C 1017M-1998 |
生产流动混凝土用的化学混合物 |
Chemical Admixtures for Use in Producing Flowing Concrete |
ASTM C 1018-1997 |
纤维增强混凝土的挠曲韧性和第一次破裂强度的试验方法(使用三点 荷载的支梁) |
Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading) |
ASTM C 1019-2000 |
灌浆取样和试验的标准试验方法 |
Standard Test Method for Sampling and Testing Grout |
ASTM C 1020-1984 |
轻水堆燃料回收用容器 |
Matrix for Light Water Reactor Fuel Reprocessing |
ASTM C 1021-2001 |
建筑密封料试验用实验室的标准实施规程 |
Standard Practice for Laboratories Engaged in the Testing of Building Sealants |
ASTM C 1022-1993 |
浓缩铀矿石的化学分析和原子吸收分析的试验方法 |
Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate |
ASTM C 1023-1987 |
久用不危害健康的卫生陶瓷装璜标签 |
Labeling Ceramic Art Materials for Chronic Adverse Health Hazards |
ASTM C 1025-1991 |
石墨电极芯挠曲断裂模数的试验方法 |
Test Method for Modulus of Rupture in Bending of Electrode Graphite |
ASTM C 1026-1987 |
测定瓷砖耐冻熔变化的试验方法 |
Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling |
ASTM C 1027-1999 |
上釉瓷砖表观耐磨损的试验方法 |
Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile (1990) |
ASTM C 1028-1996 |
用水平功率拉力计法估价瓷砖及其它相同表面的磨擦电系数的试验方法 |
Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method |
ASTM C 1029-1996 |
喷施的刚性蜂窝状聚氨基甲酸乙酯绝热材料 |
Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
ASTM C 1031-1997 |
核纯级的氧化铝粉末 |
Nuclear-Grade Aluminum Oxide Powder |
ASTM C 1032-1996 |
钢丝网抹灰底层 |
Woven Wire Plaster Base |
ASTM C 1033-1985 |
垂直安装的绝热管的稳态热传递性能的测试方法 |
Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically |
ASTM C 1034-1985 |
从上釉陶瓷烹调器上提取铅和镉的试验方法 |
Test Method for Lead and Cadmium Extracted from Glazed Ceramic Cookwear |
ASTM C 1035-1985 |
从上釉的陶瓷烹调器中提取的铅和镉 |
Lead and Cadmium Extracted from Glazed Ceramic Cookwear |
ASTM C 1036-2001 |
平面玻璃标准规范 |
Standard Specification for Flat Glass |
ASTM C 1037-1985 |
公用事业用地下预制混凝土的检验 |
Inspection of Underground Precast Concrete Utility Structures |
ASTM C 1038-2001 |
存放在水中的水硬性水泥灰浆棒膨胀的标准试验方法 |
Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water |
ASTM C 1039-1985 |
石墨电极的表观孔隙率、表观比重和松密度的试验方法 |
Test Methods for Apparent Porosity, Apparent Specific Gravity and Bulk Density of Graphite Electrodes |
ASTM C 1040-1993 |
用核子方法在适当位置测定硬化和未硬化混凝土密度的试验方法 |
Test Methods for Density of Unhardened and Hardened Concrete in Place by Nuclear Methods |
ASTM C 1041-1985 |
使用热通量转换器现场测定工业绝热材料的热通量 |
In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers |
ASTM C 1042-1999 |
使用斜剪切法测定同混凝土一起使用的乳胶粘着强度的测试方法 |
Test Method for Bond Strength of Latex Systems Used with Concrete by Slant Shear |
ASTM C 1043-1997 |
使用护热板装置中线电源加热器时稳态热传导特性测量用的加热板温度的测定 |
Determination of Hot-Plate Temperature When Using a Line Source Heater in the Guarded-Hot-Plate Apparatus for Measurement of Steady-State Thermal Transmission Properties |
ASTM C 1044-1998 |
使用单面护热板设备测量稳态热通量和热传递性能 |
Using the Guarded-Hot-Plate Apparatus in the One-Sided Mode to Measure Steady-State Heat Flux and Thermal Transmission Properties |
ASTM C 1045-2001 |
在稳态条件下计算热传递性能的标准规程 |
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 1046-1995 |
建筑物外壳构件的热通量和温度的现场测量 |
In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components |
ASTM C 1047-1999 |
石膏墙板和石膏饰面底用附件 |
Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1048-1997 |
热处理平板玻璃、完全回火涂层玻璃和完全回火无涂层玻璃 |
Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass |
ASTM C 1049-1985 |
粒状松散填塞绝热材料的安装 |
Installation of Granular Loose-Fill Thermal Insulation |
ASTM C 1050-1991 |
刚性蜂窝状聚氨基甲酸乙酯--纤维素纤维组合屋面绝缘材料 |
Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation |
ASTM C 1051-1985 |
液体金属冷却反应堆用的钠冷却剂 |
Sodium (Na) as a Coolant for Liquid Metal-Cooled Reactors |
ASTM C 1052-2001 |
液体六氟化铀散装取样标准实施规程 |
Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride |
ASTM C 1053-2000 |
排水沟、污水沟和排出口用的硼硅酸盐玻璃管和配件的标准规范 |
Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications |
ASTM C 1054-1985 |
压制的和干燥塑性耐火材料及捣实混合样品 |
Pressing and Drying Refractory Plastic and Ramming Mix Specimens |
ASTM C 1055-1999 |
引起接触烧伤的加热系统的表面调理 |
Heated System Surface Conditions That Produce Contact Burn Injuries |
ASTM C 1057-1992 |
使用数学模型和Thermesthesiometer测定加热表面表层接触温度 |
Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer |
ASTM C 1058-1997 |
评价和报告绝热材料热性能用温度的选择 |
Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
ASTM C 1059-1999 |
硬化混凝土保持新鲜用乳胶作用剂 |
Latex Agents for Bonding Fresh to Hardened Concrete |
ASTM C 1060-1990 |
框架建筑物外壳内腔的绝热设施的温度记录检验 |
Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings |
ASTM C 1062-2000 |
核燃料溶解装置的设计、制造和安装标准指南 |
Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
ASTM C 1063-1999 |
硅酸盐水泥基灰泥用板条和衬条的安装 |
Installation of Lathing and Furring for Portland Cement-Based Plaster |
ASTM C 1064-1986 |
硅酸盐水泥混凝土温度的试验方法 |
Test Method for Temperature of Freshly Mixed Portland Cement Concrete |
ASTM C 1064/C 1064M-1999 |
新拌硅酸盐水泥混凝土温度的试验方法 |
Test Method for Temperature of Freshly Mixed Portland Cement Concrete |
ASTM C 1065-1993 |
核纯级氧化锆粉末 |
Nuclear-Grade Zirconium Oxide Powder |
ASTM C 1066-1997 |
核纯级氧化锆 |
Nuclear Grade Zirconium Oxide Pellets |
ASTM C 1067-2000 |
建筑材料试验方法的耐久或屏蔽程序实施的标准实施规程 |
Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials |
ASTM C 1068-1996 |
核工业实验室测量方法的认证 |
Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1069-1986 |
用氮吸附法测定氧化铝和石英表面特性的试验方法 |
Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption |
ASTM C 1070-1986 |
用激光扩散法测定氧化铝和石英粒度分布的试验方法 |
Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering |
ASTM C 1071-1998 |
绝热和隔音材料(玻璃纤维和管道衬里材料) |
Thermal and Acoustical Insulation (Glass Fiber, Duct Lining Material) |
ASTM C 1072-2000 |
砌块抗弯粘结强度测定的标准试验方法 |
Standard Test Method for Measurement of Masonry Flexural Bond Strength |
ASTM C 1073-1997 |
用碱性反应法测定块炉渣水硬效率的试验方法 |
Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali |
ASTM C 1074-1998 |
用硬化法评定混凝土强度 |
Estimating Concrete Strength by the Maturity Method |
ASTM C 1075-1993 |
铀精矿取样 |
Sampling Uranium-Ore Concentrate |
ASTM C 1076-1997 |
核纯级氧化铪丸 |
Nuclear Grade Hafnium Oxide Pellets |
ASTM C 1077-2002 |
建筑用混凝土和混凝土集料的实验室测试标准实施规范和实验室评定标准 |
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation |
ASTM C 1078-1987 |
测定新搅拌混凝土中水泥含量的试验方法 |
Test Methods for Determining the Cement Content of Freshly Mixed Concrete |
ASTM C 1079-1987 |
测定新搅拌混凝土中水含量的试验方法 |
Test Methods for Determining the Water Content of Freshly Mixed Concrete |
ASTM C 108-1946 |
热传导用符号 |
Symbols for Heat Transmission |
ASTM C 1080-1998 |
冷却塔用除填料以外的石棉水泥制品 |
Asbestos-Cement Products Other Than Fill for Cooling Towers |
ASTM C 1081-1998 |
冷却塔用石棉水泥波状填料 |
Asbestos-Cement Corrugated Fill for Use in Cooling Towers |
ASTM C 1082-1998 |
冷却塔填塞用石棉水泥平板 |
Asbestos-Cement Flat Sheet for Cooling Tower Fill |
ASTM C 1083-2000 |
弹性泡沫垫圈和密封材料吸水性的标准试验方法 |
Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
ASTM C 1084-2002 |
硬化水硬水泥混凝土的硅酸盐水泥含量的标准试验方法 |
Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete |
ASTM C 1086-1996 |
玻璃纤维油毛毡的热绝缘 |
Glass Fiber Felt Thermal Insulation |
ASTM C 1087-2000 |
测定门窗玻璃结构装置中与附件一同使用的液态密封料相容性的标准试验方法 |
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1088-2001 |
粘土或泥板岩制薄陶面砖标准规范 |
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale |
ASTM C 1088a-2001 |
粘土或页岩制薄饰面砖的标准规范 |
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale |
ASTM C 1089-1997 |
离心铸造的预应力混凝土竿材 |
Spun Cast Prestressed Concrete Poles |
ASTM C 109/C 109M-2001 |
水硬水泥灰浆的抗压强度标准试验方法(使用2英寸或50毫米立方体试样) |
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
ASTM C 1090-2001 |
水硬水泥砂浆制圆柱形试样高度变化测量的标准试验方法 |
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout |
ASTM C 1091-1999 |
陶土管道的液体渗入和渗出的试验方法 |
Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines |
ASTM C 1093-1995 |
砌块试验方法的鉴定 |
Accreditation of Testing Agencies for Unit Masonry |
ASTM C 1094-2001 |
可移动的挠性绝热覆盖物标准指南 |
Standard Guide for Flexible Removable Insulation Covers |
ASTM C 1096-1991 |
石棉水泥中木纤维含量的测定方法 |
Test Method for Determination of Wood Fiber in Asbestos Cement |
ASTM C 1097-1995 |
沥青混凝土混合物用熟石灰 |
Hydrated Lime for Use in Asphaltic-Concrete Mixtures |
ASTM C 1098-1993 |
核纯级氧化铪粉末 |
Nuclear-Grade Hafnium Oxide Powder |
ASTM C 1099-1992 |
高温含碳耐火材料断裂模数试验方法 |
Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures |
ASTM C 11-2002 |
石膏及相关建筑材料和系统的标准术语 |
Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
ASTM C 110-2000 |
生石灰、熟石灰和石灰石的标准物理试验方法 |
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
ASTM C 1100-1988 |
耐火材料带状热冲击试验的试验方法 |
Test Method for Ribbon Thermal Shock Testing of Refractory Materials |
ASTM C 1101/C 1101M-1995 |
绝热矿物纤维套及板挠性或刚性分类试验方法 |
Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation |
ASTM C 1102-1994 |
吉尔摩水泥稠度试验针测定喷浆混凝土用含加速添加剂的硅酸盐水泥灰浆凝固时间的方法 |
Test Method for Time of Setting of Portland-Cement Pastes Containing Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles |
ASTM C 1103-1994 |
安装完毕的预制混凝土污水管线接头的校验 |
Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines |
ASTM C 1103M-1994 |
安装完毕的预制混凝土污水管线接头的校验(米制) |
Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric) |
ASTM C 1104/C 1104M-1995 |
测定未覆面矿物纤维绝缘材料蒸汽的吸收率的试验方法 |
Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
ASTM C 1105-1995 |
由于碱金属碳酸盐矿石反应引起混凝土长度变化的试验方法 |
Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
ASTM C 1106-1988 |
碳砖耐化学性及物理特性的试验方法 |
Test Methods for Chemical Resistance and Physical Properties of Carbon Brick |
ASTM C 1107-1999 |
干包装水硬水泥砂浆(非收缩的) |
Packaged Dry, Hydraulic-Cement Grout (Nonshrink) |
ASTM C 1108-1999 |
控制电势库仑法测定钚的试验方法 |
Test Method for Plutonium by Controlled-Potential Coulometry |
ASTM C 1109-1998 |
使用电感耦合等离子-原子发射光谱法对核废料中浸出液分析试验方法 |
Test Method for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry |
ASTM C 1110-1988 |
使用玻璃熔化或压制粉末法制备矿石中铀X射线发射光谱分析用样品 |
Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method |
ASTM C 1111-1998 |
电感耦合等离子-原子发射光谱法测定污水流中素的试验方法 |
Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM C 1112-1999 |
特种核材料的控制和物理安全用辐射监控器的应用 |
Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material |
ASTM C 1113-1999 |
用热金属丝(铂阻尼式温度计技术)测定耐火制品的导热性的试验方法 |
Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
ASTM C 1114-1998 |
薄加热设备稳态热传导特性的试验方法 |
Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM C 1115-2000 |
密实弹性硅橡胶衬垫和附件标准规范 |
Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
ASTM C 1116-2002 |
纤维增强混凝土及喷浆混凝土的标准规范 |
Standard Specification for Fiber-Reinforced Concrete and Shotcrete |
ASTM C 1117-1989 |
抗穿透性法测定喷浆混凝土混合料的凝固时间试验方法 |
Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance |
ASTM C 1118-1989 |
波长色散X射线荧光系统件选择 |
Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems |
ASTM C 1119-1990 |
石棉水泥混合料真空排放的试验方法 |
Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
ASTM C 1120-1998 |
石棉清洗试验方法 |
Test Method for Wash Test of Asbestos |
ASTM C 1121-1990 |
石棉的T/N湿度分类试验方法 |
Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
ASTM C 1122-1990 |
石棉的湿体积的试验方法 |
Test Method for Wet Volume of Asbestos |
ASTM C 1123-1990 |
石棉的可压缩性和恢复试验方法 |
Test Method for Compressibility and Recovery of Asbestos |
ASTM C 1124-1990 |
石棉煤油保存的试验方法 |
Test Method for Kerosene Retention of Asbestos |
ASTM C 1125-1989 |
石棉渗透指数试验方法 |
Test Method for Penetration Index of Asbestos |
ASTM C 1126-1998 |
覆面或未覆面刚性多孔酚醛热绝缘材料 |
Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
ASTM C 1127-2001 |
有整体磨损表面的高固体含量及冷液处理的弹性防水薄膜材料的应用标准指南 |
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
ASTM C 1128-1995 |
核燃料循环材料分析用操作参考材料的制备 |
Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1129-1989 |
通过给凸面阀门及法兰增加热绝缘材料评估蓄热量 |
Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges |
ASTM C 113-1993 |
耐火砖的二次加热变化的试验方法 |
Test Method for Reheat Change of Refractory Brick |
ASTM C 1130-1990 |
微型热流量传感器的校正 |
Calibrating Thin Heat Flux Transducers |
ASTM C 1131-1995 |
混凝土涵洞,雨水沟,排污沟系统的最低成本(使用周期)的标准规范 |
Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems |
ASTM C 1132-1995 |
热流量计装置的校正 |
Calibration of the Heat Flow Meter Apparatus |
ASTM C 1133-1996 |
分段无源γ射线扫描法对低密度废品及残渣中特殊核材料进行无损检验的方法 |
Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning |
ASTM C 1134-1990 |
部分浸入后刚性热绝缘材料水分保持试验方法 |
Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion |