标准号 |
中文名称 |
英文名称 |
| ASTM C 1352-1996 |
方石弯曲弹性模量的标准试验方法 |
Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone |
| ASTM C 1353-1998 |
通过分磨损物对方石的磨损抗性的标准试验方法 |
Standard Test Method for Abrasion Resistance of Dimension Stone by the Taber Abraser |
| ASTM C 1354-1996 |
土方石独立石桥墩的强度的标准试验方法 |
Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone |
| ASTM C 1355/C 1355M-1996 |
玻璃纤维增强石膏成份的标准规范 |
Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM C 1356M-1996 |
微观计点法定量测定波特兰水泥熟料中相位的标准试验方法 |
Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure [Metric] |
| ASTM C 1357-1998 |
评定砖石砌合强度的标准试验方法 |
Standard Test Methods for Evaluating Masonry Bond Strength |
| ASTM C 1358-1996 |
室温下带有实心长方形截面样品的连续增强纤维高级陶瓷的单值压强试验的标准试验方法 |
Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures |
| ASTM C 1359-1996 |
高温下带有实心长方形截面样品的连续增强纤维高级陶瓷的单值抗拉强度试验的标准试验方法 |
Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Specimens at Elevated Temperatures |
| ASTM C 136-2001 |
细集料及粗集料筛分的标准试验方法 |
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C 1360-1996 |
室温下连续纤维增强高级陶瓷的等高度、轴向的和双向拉伸循环疲劳强度的标准规程 |
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1361-1996 |
室温下高级陶瓷的等高度、轴向的和双向拉伸循环疲劳强度的标准规程 |
Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1362-1997 |
新混合的液压混凝土的流动性的标准试验方法 |
Standard Test Method for Flow of Freshly Mixed Hydraulic nt Concrete |
| ASTM C 1363-1997 |
用隔热箱测定建筑组件的热性能的标准试验方法 |
Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1364-1997 |
建筑铸石的标准规范 |
Standard Specification for Architectural Cast Stone |
| ASTM C 1365-1998 |
用X射线粉末衍射分析测定硅酸盐水泥和硅酸盐水泥熔渣的阶段比例的标准试验方法 |
Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
| ASTM C 1366-1997 |
高温下单值高级陶瓷抗拉强度的标准试验方法 |
Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| ASTM C 1367-2001 |
最大承载剪切下热应用密封剂耐热性的标准试验方法 |
Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear |
| ASTM C 1368-2001 |
室温下用恒定应力率弯曲试验测定高级陶瓷的裂纹缓慢生长系数的标准试验方法 |
Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature |
| ASTM C 1369-1997 |
釉面结构绝缘玻璃件的二级边缘密封剂的标准规范 |
Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units |
| ASTM C 1371-1998 |
使用便携式发射计测定接近室温的材料辐射的标准试验方法 |
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM C 1372-2001 |
局部挡土墙砌块的标准规范 |
Standard Specification for Segmental Retaining Wall Units |
| ASTM C 1372a-2001 |
部分支撑墙砌块的标准规范 |
Standard Specification for Segmental Retaining Wall Units |
| ASTM C 1373-1998 |
模拟冬季条件下测定顶楼绝缘系统热阻性的标准规程 |
Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions |
| ASTM C 1374-1997 |
测定松散充填建筑物绝缘的安装厚度的标准试验方法 |
Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation |
| ASTM C 1375-1997 |
用于测试建筑物密封和胶粘剂的基质的标准指南 |
Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| ASTM C 1376-1997 |
玻璃上的热解和真空淀积涂层的标准规范 |
Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass |
| ASTM C 1377-1997 |
表面/应力测量装置的校准的标准试验方法 |
Standard Test Method for Calibration of Surface/Stress Measuring Devices |
| ASTM C 1378-1997 |
抗锈蚀性的测定的标准试验方法 |
Standard Test Method for Determination of Resistance to Staining |
| ASTM C 1379-1997 |
用电感耦合的等离子质谱法对铀235和铀238同位素进行尿分析的标准试验方法 |
Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry |
| ASTM C 138-2001 |
混凝土的单位重量分析、屈服点及空气含量测定(重量计算)的标准试验方法 |
Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete |
| ASTM C 138/C 138Ma-2001 |
混凝土的密度(单位重量)、屈服点及空气含量测定(重量计算)的标准试验方法 |
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete |
| ASTM C 1380-1997 |
用同位素稀释质谱法测定铀含量和同位成份的标准试验方法 |
Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry |
| ASTM C 1381-1997 |
模制玻璃纤维增强石膏部件的标准规范 |
Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1382-2002 |
当用作外部绝缘和精整系统接缝料时密封剂抗拉粘附特性测定的试验方法 |
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
| ASTM C 1383-1998 |
用冲击回声法测量P波速度和混凝土板的厚度的标准试验方法 |
Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method |
| ASTM C 1384-2001 |
圬工灰浆改良剂的标准规范 |
Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1385-1998 |
喷浆混凝土取样材料的标准规程 |
Standard Practice for Sampling Materials for Shotcrete |
| ASTM C 1386-1998 |
预制蒸养加气混凝土墙建筑部件的标准规范 |
Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units |
| ASTM C 1387-1998 |
土壤里锝99的测定的标准指南 |
Standard Guide for Determination of Technetium-99 in Soil |
| ASTM C 139-2001 |
雨水井和人孔建造用混凝土砌块标准规范 |
Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes |
| ASTM C 1392-1998 |
评价构造密封门窗玻璃破坏的标准指南 |
Standard Guide for Evaluating Failure of Structural Sealant Glazing |
| ASTM C 1394-1998 |
评价原始构造硅酮门窗玻璃的标准指南 |
Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
| ASTM C 1395/C 1395M-2001 |
石膏顶棚板规范 |
Specification for Gypsum Ceiling Board |
| ASTM C 1396/C 1396M-2001 |
石膏板标准规范 |
Standard Specification for Gypsum Board |
| ASTM C 1397-1998 |
PB级外部绝缘和精整系统的应用的标准规程 |
Standard Practice for Application of Class PB Exterior Insulation and Finish Systems |
| ASTM C 1398-1998 |
用吉尔摩水泥稠度试验针实验室测定含喷浆水泥添加剂的水硬水泥砂浆的凝固时间的标准试验方法 |
Standard Test Method for Laboratory Determination of Time Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles |
| ASTM C 1399-2000 |
获取纤维增强混凝土的平均剩余强度的试验方法 |
Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete |
| ASTM C 14-1999 |
混凝土污水管、雨水管和涵管 |
Concrete Sewer, Storm Drain and Culvert Pipe |
| ASTM C 140-2001 |
混凝土圬工单位及相关单位取样和检验的标准试验方法 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1400-2001 |
降低新砌筑墙风化势能的标准指南 |
Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls |
| ASTM C 1401-1998 |
结构性密封门窗玻璃的标准指南 |
Standard Guide for Structural Sealant Glaze |
| ASTM C 1402-1998 |
土壤样品的高分辨率γ射线光谱测定法的标准指南 |
Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples |
| ASTM C 1403-1999 |
圬工砂浆吸水率的标准试验方法 |
Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 1404/C 1404M-1998 |
用直接拉力测量与混凝土一起使用的胶粘系统的粘合强度的标准试验方法 |
Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension |
| ASTM C 1405-2001 |
釉面砖标准规范(一次烧成的实心砖) |
Standard Specification for Glazed Brick (Single Fired, Solid Brick Units) |
| ASTM C 1405b-2001 |
釉面砖标准规范(一次烧成的实心砖) |
Standard Specification for Glazed Brick (Single Fired, Solid Brick Units) |
| ASTM C 1407-1998 |
计算成型耐火制品面积、体积和线性变化的标准实施规范 |
Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes |
| ASTM C 1408-1998 |
用直接燃烧红外探测法测定氧化铀粉末和颗粒中总碳量的标准试验方法 |
Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method |
| ASTM C 1409-1998 |
测量和估算绝缘管及件数量的标准导则 |
Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components |
| ASTM C 140a-2001 |
混凝土圬工单位及相关单位取样和检验的标准试验方法 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 141-1997 |
建筑结构用水硬性熟石灰 |
Hydraulic Hydrated Lime for Structural Purposes |
| ASTM C 1410-1998 |
多孔三聚氰胺隔热和吸音的标准规范 |
Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1411-2001 |
同位素分析前铀和钚离子交换分离的标准实施规程 |
Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
| ASTM C 1413-1999 |
用热电离质谱法进行水解六氟化铀和硝酸双氧铀溶液同位素分析的标准试验方法 |
Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry |
| ASTM C 1414-2001 |
用离子交换法从钚中分离镅的标准实施规程 |
Standard Practice for the Separation of Americium from Plutonium by Ion Exchange |
| ASTM C 1415-2001 |
用α能谱测定法测定钚-238同位素丰度的标准试验方法 |
Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry |
| ASTM C 1416-1999 |
用X射线荧光法分析天然水和废水中铀的标准试验方法 |
Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence |
| ASTM C 1417-2000 |
直接设计的钢筋混凝土污水管、雨水管和涵管的生产标准规范 |
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design |
| ASTM C 1417M-2000 |
直接设计的钢筋混凝土污水管、雨水管和涵管的生产标准规范(米制) |
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1419-1999 |
室温下耐火材料中的声速及声速在测量近似杨氏模量中的应用的标准试验方法 |
Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Youngs Modulus |
| ASTM C 142-1997 |
集料中的土块和易碎颗粒含量的测试方法 |
Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM C 1420-1999 |
成品砌块投入使用的选择、搬运和送运的标准导则 |
Standard Guide for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage |
| ASTM C 1421-2001 |
室温下高级陶瓷断裂韧性测定的标准试验方法 |
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1421b-2001 |
室温下高级陶瓷断裂韧性测定的标准试验方法 |
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1422-1999 |
化学增强平面玻璃的标准规范 |
Standard Specification for Chemically Strengthened Flat Glass |
| ASTM C 1423-1998 |
隔热用封装材料选择的标准指南 |
Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1424-1999 |
室温下高级陶瓷恒定抗压强度测定的标准试验方法 |
Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1425-1999 |
高温下1-D和2-D连续纤维增强高级陶瓷层间剪切强度测定的标准试验方法 |
Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
| ASTM C 1426-1999 |
旋光计检验和校正的标准实施规范 |
Standard Practices for Verification and Calibration of Polarimeters |
| ASTM C 1427-1999 |
预制挠性多孔聚烯烃板状和管状隔热材料规范 |
Specification for Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1428-1999 |
用单支架气体源多收集器质谱仪法进行六氟化铀的同位素分析的标准试验方法 |
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method |
| ASTM C 1429-1999 |
用双支架多收集器气体质谱仪进行六氟化铀的同位素分析的标准试验方法 |
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer |
| ASTM C 143-1990 |
硅酸盐水泥混凝土坍落度的试验方法 |
Test Method for Slump of Hydraulic Cement Concrete |
| ASTM C 143/C 143M-2000 |
水凝水泥混凝土坍落度的标准试验方法 |
Standard Test Method for Slump of Hydraulic Cement Concrete |
| ASTM C 1431-1999 |
维护容器清理用铝基废核燃料腐蚀检验的标准导则 |
Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal |
| ASTM C 1432-1999 |
测定钚中杂质的标准试验方法:酸溶解、离子交换矩阵分离和感应耦合等离子体-原子发射光谱法(ICP/AES)分析 |
Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis |
| ASTM C 1433-2001 |
涵洞、雨水管和污水管道用预制钢筋混凝土箱形部件的标准规范 |
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers |
| ASTM C 1433M-2001 |
涵洞、雨水管和污水管道用预制钢筋混凝土箱形部件的标准规范(米制) |
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] |
| ASTM C 1435-1999 |
用振动锤在柱形模子中模压碾实混凝土的标准实施规范 |
Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer |
| ASTM C 1436-1999 |
喷浆混凝土用材料的标准规范 |
Standard Specification for Materials for Shotcrete |
| ASTM C 1437-1999 |
水硬水泥灰浆流动性的标准试验方法 |
Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 1438-1999 |
水硬水泥混凝土和灰浆用乳液和粉末状聚合物改性剂的标准规范 |
Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar |
| ASTM C 1439-1999 |
聚合物改性的灰浆和混凝土的标准试验方法 |
Standard Test Methods for Polymer-Modified Mortar and Concrete |
| ASTM C 144-1999 |
砌筑砂浆集料 |
Aggregate for Masonry Mortar |
| ASTM C 1441-1999 |
用傅里叶转换红外(FTIR)光谱分析六氟化铀中制冷剂114加上其它含碳和含氟化合物的标准试验方法 |
Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy |
| ASTM C 1445-1999 |
使用流动性试验台测量浇铸耐火材料一致性的标准试验方法 |
Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table |
| ASTM C 1446-1999 |
测量自流式浇铸耐火材料一致性和工作时间的标准试验方法 |
Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories |
| ASTM C 1447-1999 |
非石棉纤维水泥地下排水管标准规范 |
Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM C 1448-1999 |
非石棉纤维水泥管标准规范 |
Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| ASTM C 1449-1999 |
非石棉纤维水泥无压污水管标准规范 |
Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ASTM C 1450-1999 |
非石棉纤维水泥雨水排水管标准规范 |
Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1450/C 1450M-2001 |
非石棉纤维水泥排雨水管的标准规范 |
Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1450/C 1450Ma-2001 |
非石棉纤维水泥阵雨排水管标准规范 |
Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1451-1999 |
测定单一来源混凝土配料匀细度的标准实施规程 |
Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source |
| ASTM C 1458-2000 |
用量热分析进行钚、氚和241Am无损试验的标准试验方法 |
Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay |
| ASTM C 1493-2001 |
用差动衰减系统钝化-活化中子计数法对废物中的核物质进行无损分析的标准试验方法 |
Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System |
| ASTM C 1494-2001 |
测定氮化硅粉末中碳、氮、氧的质量比值的标准试验方法 |
Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder |
| ASTM C 1495-2001 |
表面研磨对高级陶瓷抗弯强度影响的标准试验方法 |
Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics |
| ASTM C 1496-2001 |
外部石墙和表面的评价和维护标准指南 |
Standard Guide for Assesment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades |
| ASTM C 1497-2001 |
纤维素纤维稳定热绝缘的标准规范 |
Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation |
| ASTM C 1498-2001 |
建筑材料的吸湿等热性的标准试验方法 |
Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
| ASTM C 482-1981 |
瓷砖和硅酸盐水泥粘着强度的试验方法 |
Test Method for Bond Strength of Ceramic Tile to Portland Cement |
| ASTM C 531-2000 |
耐化学腐蚀的灰浆、薄浆、整体面层和聚合物混凝土的热膨胀系数和线收缩性的标准试验方法 |
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
| ASTM C 534-1999 |
片状和管状预制韧性弹性的蜂窝状绝热材料 |
Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form |
| ASTM C 579-1996 |
耐化学腐蚀的灰浆、薄浆及整体面层的抗压强度的试验方法 |
Test Method for Compressive Strength of Chemical-Resistant Mortars, Grouts and Monolithic Surfacings and Polymer Concretes |
| ASTM C 580-1998 |
耐化学侵蚀的灰浆,簿浆及整体面层的挠性强度和弹性模量的试验方法 |
Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts and Monolithic Surfacings |
| ASTM C 581-1994 |
作为液体工作用玻璃纤维增强结构的热固树脂的耐化学腐蚀试验方法 |
Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ASTM C 582-1995 |
在化学药品环境中使用的自承重结构用增强塑料层压材料 |
Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion Resistant Equipment |
| ASTM C 583-1980 |
在高温下耐火材料的挠折模量的试验方法 |
Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures |
| ASTM C 584-1981 |
卫生陶瓷器具和有关制品的透光光泽度的试验方法 |
Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com