标准号 |
中文名称 |
英文名称 |
ANSI/ASTM D 6422-1999 |
汽油酒精混合物的耐水性的试验方法 |
Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends |
ANSI/ASTM D 6423-1999 |
变性燃料酒精,燃料酒精和酒精的PHE测定的试验方法 |
Test Method for Determination of the PHE of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85) |
ANSI/ASTM D 6424-1999 |
辛烷自燃通风火花点火飞行器引擎的操作规程 |
Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines |
ANSI/ASTM D 6425-1999 |
使用SRV试验机器的EP润滑油摩擦和磨损特性测量的试验方法 |
Test Method for Measuring Friction and Wear Properties of EP Lubricating Oils Using the SRV Test Machine |
ANSI/ASTM D 6426-1999 |
馏出物燃料油的滤过性测定的试验方法 |
Test Method for Determining Filterability of Distillate Fuel Oils |
ANSI/ASTM D 6435-1999 |
塑料成材和型材剪切特性的试验方法 |
Test Method for Shear Properties of Plastic Lumber and Shapes |
ANSI/ASTM D 6436-1999 |
ASTM特性的报告指南 |
Guide for Reporting of ASTM Properties |
ANSI/ASTM D 6439-1999 |
蒸气,气体和水电润滑涡轮润滑系统的清洁,涌流和纯化指南 |
Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems |
ANSI/ASTM D 6444-1999 |
用波长散射X射线荧光法测定汽油中硫的试验方法 |
Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence |
ANSI/ASTM D 6445-1999 |
能量分散的X射线荧光光谱仪方法对汽油中硫的试验方法 |
Test Method for Sulfur in Gasoline by Energy-Dispersive X-Ray Fluorescence Spectrometry |
ANSI/ASTM D 6447-1999 |
通过电量分析对航空涡轮燃料的氢过氧化物数量的试验方法 |
Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis |
ANSI/ASTM D 6448-1999 |
由使用的润滑油来的工业锅炉燃料规范 |
Specification for Industrial Burner Fuels from Used Lubricating Oils |
ANSI/ASTM D 6450-1999 |
用连续闭杯试验对闪点的试验方法 |
Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester |
ANSI/ASTM D 6454-1998 |
用于铝生产的碳极块的芯取样和取样计划指南 |
Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production |
ANSI/ASTM D 6456-1999 |
由多聚树脂生产的精密部件规范 |
Specification for Finished Parts Made from Polymide Resin |
ANSI/ASTM D 6457-1999 |
由聚四氟乙烯(PTFE)生产的厚壁管和压缩和挤压注模棒规范 |
Specification for Extruded and Compression Molded Rod and Heavy Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
ANSI/ASTM D 646-1996 |
纸张及纸板的基本重量的测试方法(单位面积的重量) |
Test Method for Grammage of Paper and Paperboard (Weight Per Unit Area) |
ANSI/ASTM D 6469-1999 |
燃料和燃料系统中微生物污染指南 |
Guide to Microbial Contamination in Fuels and Fuel Systems |
ANSI/ASTM D 647-1988 |
塑料模制材料的试样用模型的设计实施规程(08.01) |
Practice for Design of Molds for Test Specimens of Plastic Molding Materials (08.01) |
ANSI/ASTM D 6471-1999 |
汽车和轻载装置用的可回收的预稀释的水化乙二醇引擎冷却剂规范 |
Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service |
ANSI/ASTM D 6478-1999 |
馏出燃料的高温稳定性的试验方法 |
Test Method for High Temperature Stability of Distillate Fuels |
ANSI/ASTM D 6481-1999 |
能量分散X射线荧光度谱仪对润滑油中磷,硫,钙,锌测定的试验方法 |
Test Method for Determination of Phosphorus, Sulfur, Calcium and Zinc in Lubricating Oils by Energy Dispersive X-Ray Fluorescence Spectroscopy |
ANSI/ASTM D 6482-2001 |
通过搅拌冷却曲线分析测定含水聚合淬火剂冷却特性的试验方法 |
Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
ANSI/ASTM D 6483-1999 |
T-9柴油机引擎中柴油引擎油评价的试验方法 |
Test Method for Evaluation of Diesel Engine Oils in the T-9 Diesel Engine |
ANSI/ASTM D 6494-2001 |
测定工作场所中作为可溶性苯馏份的沥青烟雾颗粒物的试验方法 |
Test Method for Determination of Asphalt Fume Particulate Matter In Workplace Atmospheres as Benzene Soluble Fraction |
ANSI/ASTM D 6501-2001 |
卤水中磷酸的试验方法 |
Test Method for Phosphonate in Brines |
ANSI/ASTM D 6503-2001 |
用结肠镜对水中肠球菌的试验方法 |
Test Method for Enterococci in Water Using Enterolert |
ANSI/ASTM D 6504-2001 |
高纯度水中阳离子导电性测定的试验方法 |
Test Method for On-Line Determination of Cation Conductivity in High Purity Water |
ANSI/ASTM D 6508-2001 |
使用毛细管离子电泳和铬酸电解液对含水基体中不溶非有机阴离子测定的试验方法 |
Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte |
ANSI/ASTM D 6512-2001 |
试验室间定量评价的操作规程 |
Practice for Interlaboratory Quantitation Estimate |
ANSI/ASTM D 6514-2000 |
涡轮油用的高温通用氧化试验的试验方法 |
Test Method for High Temperature Universal Oxidation Test for Turbine Oils (1) |
ANSI/ASTM D 6520-2001 |
挥发和半挥发有机化合物分析的水和其顶端空间固相微抽提的操作规程 |
Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds |
ANSI/ASTM D 6522-2001 |
用便携式分析仪测定从天然气往复式发动机、内燃涡轮机、锅炉和过程加热器中排放的氮氧化物、一氧化碳和氧气的浓度的实施规程 |
Practice for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers |
ANSI/ASTM D 6529-2001 |
由50-1000US/CM馈入的连续电去电离系统操作性能的试验方法 |
Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50-1000 uS/cm |
ANSI/ASTM D 6530-2001 |
冷却塔水中总活性生物量的试验方法 |
Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA) |
ANSI/ASTM D 6547-2000 |
双金属耦合润滑液流的腐蚀性的试验方法 |
Test Method for Corrosiveness of a Lubricating Fluid to a Bi-Metallic Couple |
ANSI/ASTM D 6549-2001 |
通过搅拌冷却曲线分析测定淬火剂冷却特性的试验方法 |
Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) |
ANSI/ASTM D 6550-2000 |
超临界液相色谱对汽油中烯烃含量测定的试验方法 |
Test Method for the Determination of the Olefin Content of Gasolines by Super-Critical-Fluid Chromatography |
ANSI/ASTM D 6552-2001 |
控制和表征在称量悬浮微粒中产生的误差的实施规程 |
Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
ANSI/ASTM D 6553-2000 |
润滑油的冷却相容性的试样方法 |
Test Method for Coolant Compatibility of Way Lubricants |
ANSI/ASTM D 6557-2000 |
汽车引擎油的防锈特性评价的试验方法 |
Test Method for Evaluation of the Rust Preventive Characteristics of Automotive Engine Oils |
ANSI/ASTM D 6561-2001 |
用(甲基-2-苯基-1)哌嗪(MOPIP)法测定工作场所空气中单体气体颗粒和低聚合二异腈酸乙二脂的试验方法 |
Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyante (HDI) in Air with (Methoxy-2-phenyl-1) Piperazine (MOPIP) in the Workplace |
ANSI/ASTM D 6562-2001 |
用9-甲氨基甲基蒽法测定工作场所空气中气态二异腈酸乙二脂的试验方法 |
Test Method for Determination of Gaseous Hexamethylene Diisocyante (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace |
ANSI/ASTM D 6568-2001 |
水样品痕量化学分析报告,实施,计划指南 |
Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
ANSI/ASTM D 6569-2001 |
PH值生产线测量的试验方法 |
Test Method for On-Line Measurement of pH |
ANSI/ASTM D 6581-2001 |
通过化学抑制离子光谱仪对饮用水中溴酸盐,溴化物,氯酸盐,氯化物的试验方法 |
Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography |
ANSI/ASTM D 6584-2000 |
通过气相色谱对B-100生物柴油甲基酯中自由和总丙三醇测定的试验方法 |
Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography |
ANSI/ASTM D 6589-2001 |
大气扩散模式性能的统计评价指南 |
Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance |
ANSI/ASTM D 6615-2000 |
喷射B型宽区域切割航空涡轮燃料规范 |
Specification for Jet B Wide-Cut Aviation Turbine Fuel |
ANSI/ASTM D 6617-2001 |
由标准材料来的使用单个试验结果的试验室偏压检测的操作规程 |
Practice for Laboratory Bias Detection Using a Single Test Result from a Standard Material |
ANSI/ASTM D 6618-2001 |
四冲程增压式1m-PC单缸柴油试验发动机的评价的试验方法 |
Test Method for Evaluation of Engine Oils in the Diesel Four-Stroke Cycle Supercharged 1m-Pc Single Cylinder Oil Test Engine |
ANSI/ASTM D 6623-2001 |
用高分辨气相色谱法测定火花式点燃发动机燃料中的单个成份 |
The Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography |
ANSI/ASTM D 6624-2001 |
使用流量分析数据对加工流动材料收集批量流动比例平均特性值测定的操作规程 |
Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ANSI/ASTM D 664-1996 |
用电势滴定法测定石油产品酸度值的试验方法 |
Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
ANSI/ASTM D 665-1995 |
在有水条件下抑制矿物油生锈的防锈特性的试验方法 |
Rust-Preventing Characteristics of Steam-Turbine Oil in the Presence of Water, Method of Test for (05.01) |
ANSI/ASTM D 6662-2001 |
聚烯烃基塑料废物盖板规范 |
Specification for Polyolefin-Based Plastic Lumber Decking Boards |
ANSI/ASTM D 6666-2001 |
含水聚合淬火剂的评价指南 |
Guide for Evaluation of Aqueous Polymer Quenchants |
ANSI/ASTM D 6667-2001 |
通过超声荧光对液化石油气和气态烃中总挥发硫的测定的试验方法 |
Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence |
ANSI/ASTM D 6668-2001 |
可燃比率在F=0和F=1之间的识别的试验方法 |
Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 |
ANSI/ASTM D 668-1994 |
电绝缘用刚性杆和管的尺寸测量的试验方法 |
Method for Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation (10.01) |
ANSI/ASTM D 6689-2001 |
在同样的试验室组织内多个工作台优化,控制和报告试验方法的不确定性指南 |
Guide for Optimizing, Controlling and Reporting Test Method Uncertainties From Multiple Workstations in the Same Laboratory Organization |
ANSI/ASTM D 6691-2001 |
通过限定的微生物的联合对海洋环境中塑料材料的需氧生物降解测定的试验方法 |
Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium |
ANSI/ASTM D 6692-2001 |
海水中无线电标签的聚合塑料材料生物降解性测定的试验方法 |
Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater |
ANSI/ASTM D 6697-2001 |
水的化学氧需求测定的试验方法 |
Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water |
ANSI/ASTM D 6698-2001 |
水中5Ntu以下的生产线上混浊测量的试验方法 |
Test Method for On-Line Measurement of Turbidity Below 5 Ntu in Water |
ANSI/ASTM D 6709-2001 |
系列8火花点火引擎中引擎油评价的试验方法 |
Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) |
ANSI/ASTM D 671-1990 |
采用等幅强振动方法对塑料挠性疲劳强度的试验方法 |
Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (08.01) |
ANSI/ASTM D 6710-2001 |
烃基淬火油评价指南 |
Guide for Evaluation of Hydrocarbon-Based Quench Oil |
ANSI/ASTM D 6712-2001 |
超高分子量聚乙烯制实心塑料型材规范 |
Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
ANSI/ASTM D 6713-2001 |
由聚偏氟乙烯制成的挤制和压模制型材的试验方法 |
Test Method for Extruded and Compression Molded Shapes Made from Poly(Vinlidene Fluoride) (PVDF) |
ANSI/ASTM D 6728-2001 |
采用旋转圆盘电极原子发射光谱法测定气体涡轮机和柴油机燃料中的杂质的试验方法 |
Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
ANSI/ASTM D 6729-2001 |
采用100米毛细管(带前柱管)高分辨气相色谱法测定火花点燃式发动机燃料中单个素的试验方法 |
Test Method for the Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary (With Precolumn) High Resolution Gas Chromatography |
ANSI/ASTM D 6730-2001 |
采用100米毛细管高分辨气相色谱法测定火花点燃式发动机燃料中单个素的试验方法 |
Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography |
ANSI/ASTM D 6731-2001 |
测定关闭的透气性测定器中润滑剂或润滑剂组分的有氧生物降解性和水中生物降解性的试验方法 |
Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
ANSI/ASTM D 6732-2001 |
采用石墨炉原子吸收光谱测定法测定喷气发动机燃料中铜含量的试验方法 |
Test Method for the Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry |
ANSI/ASTM D 6733-2001 |
采用50米毛细管高分辨气相色谱法测定火花点燃式发动机燃料中单个素的试验方法 |
Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50 Meter Capillary High Resolution Gas Chromatography |
ANSI/ASTM D 6735-2002 |
测量矿物焙烧排气源中的气体氯化物和氟化物的试验方法. 撞击器方法 |
Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources - Impinger Method |
ANSI/ASTM D 6743-2001 |
热传送的有机流体的热稳定性试验方法 |
Test Method for Thermal Stability of Organic Heat Transfer Fluids |
ANSI/ASTM D 6744-2001 |
采用保护热流计技术测定阳极碳的热导率的试验方法 |
Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique |
ANSI/ASTM D 6745-2001 |
电极碳的线性热膨胀试验方法 |
Test Method for Linear Thermal Expansion of Electrode Carbons |
ANSI/ASTM D 6748-2002 |
测定由于Phenalenes 和 Phenalenones的存在引起中间蒸馏燃料的潜在不稳定性的试验方法.用便携式光谱仪的快速法 |
Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones. Rapid Method by Portable Spectrophotometer |
ANSI/ASTM D 6749-2002 |
石油产品的倾点试验方法(自动空气压力法) |
Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) |
ANSI/ASTM D 6750-2002 |
评估高速单缸柴油发动机中机油的试验方法.1k程序(0.4%燃料硫)和1n程序(0.4%燃料硫) |
Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - 1k Procedure (0.4% Fuel Sulfur) and 1n Procedure (0.04% Fuel Sulfur) |
ANSI/ASTM D 6751-2002 |
蒸馏燃料用Biodiesel 燃料 (B100)混合库的临时规范 |
Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels |
ANSI/ASTM D 69-1996 |
摩擦带的试验方法 |
Test Methods for Friction Tapes |
ANSI/ASTM D 695-1991 |
硬塑料的压缩特性试验方法 |
Test Method for Compressive Properties of Rigid Plastics (08.01) |
ANSI/ASTM D 696-1991 |
塑料的线性热膨胀系数的试验方法 |
Test Method for Coefficient of Linear Thermal Expansion of Plastics (08.01) |
ANSI/ASTM D 704-1994 |
三聚氰酰胺-甲醛模制化合物规范 |
Specifications for Melamine-Formaldehyde Molding Compounds (08.01) |
ANSI/ASTM D 705-1994 |
脲醛模压化合物规范 |
Specification for Urea-Formaldehyde Molding Compounds (08.01) |
ANSI/ASTM D 710-1997 |
电气绝缘用的硫化纤维板-94,棒-94和管的规范 |
Specification for Vulcanized Fibre Sheets-94, Rods-94, and Tubes Used for Electrical Insulation (10.01) |
ANSI/ASTM D 721-1987 |
石油蜡中石油含量的试验方法 |
Test Method for Oil Content of Petroleum Waxes (05.01, 15.09) |
ANSI/ASTM D 731-1995 |
热固模压粉的模压系数的试验方法 |
Test Method for Molding Index of Thermosetting Molding Powder (08.01) |
ANSI/ASTM D 784-1995 |
电气绝缘用柑桔虫胶和其他印度紫胶规范 |
Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation (10.01) |
ANSI/ASTM D 785-1989 |
塑料及电绝缘材料的洛氏硬度测试方法 |
Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials (08.01) |
ANSI/ASTM D 787-1997 |
乙基纤维模制和挤压化合物规范 |
Specification for Ethyl Cellulose Molding and Extrusion Compounds |
ANSI/ASTM D 788-1997 |
聚合(异丁烯酸甲酯)(PMMA)模制和挤压复合物规范 |
Specification for Poly (Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds (95-1, Item 18) |
ANSI/ASTM D 789-1992 |
测定聚酰胺的相对粘度、融点和含湿量的试验方法 |
Test Methods for Determination of Relative Viscosity, Melting Point, and Moisture Content of Polyamide (PA) (08.01) |
ANSI/ASTM D 790-1992 |
未增强和增强塑料及电绝缘材料挠曲性能的试验方法 |
Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (08.01) |
ANSI/ASTM D 792-1991 |
采用置换法对塑料的密度和比重(相对密度)的试验方法 |
Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (08.01) |
ANSI/ASTM D 808-1995 |
新的及用过的石油产品中氟含量的试验方法(氧弹法) |
Test Method for Chloride in New and Used Petroleum Products (Bomb Method) (05.01) |
ANSI/ASTM D 834-1990 |
蜡纸的20度镜光泽的试验方法 |
Test Method for 20-Deg Specular Gloss of Waxed Paper |
ANSI/ASTM D 86-2001 |
石油产品蒸馏的试验方法 |
Distillation of Petroleum Products, Method of Test for (05.01, 06.04) |
ANSI/ASTM D 866-1995 |
电线和电缆丁苯合成橡胶外壳规范 |
Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01) |
ANSI/ASTM D 87-1987 |
石油蜡熔点的测试方法(冷却曲线) |
Test Method for Melting Point of Petroleum Wax (Cooling Curve) (05.01) |
ANSI/ASTM D 873-1994 |
航空燃料氧化稳定性的试验方法 |
Oxidation Stability of Aviation Fuels (Potential Residue Method), Test Method for (05.01) |
ANSI/ASTM D 874-1995 |
润滑油和添加剂中硫酸盐灰分的试验方法 |
Test Method for Sulfated Ash from Lubricating Oils and Additives (05.01) |
ANSI/ASTM D 876-1995 |
电绝缘用非刚性氯乙烯聚合物管的试验方法(10.01) |
Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation (10.01) |
ANSI/ASTM D 881-1990 |
透过透明塑料的视线偏差试验方法 |
Test Method for Deviation of Line of Sight through Transparent Plastic (08.01) |
ANSI/ASTM D 882-1995 |
塑料薄膜的拉伸性能试验方法 |
Test Methods for Tensile Properties of Thin Plastic Sheeting (08.01) |
ANSI/ASTM D 883-1993 |
与塑料有关的术语 |
Terminology Relating to Plastics (08.01) |
ANSI/ASTM D 892-1998 |
润滑油起泡特性的试验方法 |
Test Method for Foaming Characteristics of Lubricating Oils (05.01) |
ANSI/ASTM D 893-1992 |
已用润滑油中不溶物质的试验方法 |
Insolubles in Used Lubricating Oils, Method of Test for (05.01) |
ANSI/ASTM D 902-1994 |
电绝缘用挠性树脂涂覆玻璃织物和玻璃织物带的试验方法 |
Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation (10.01) |
ANSI/ASTM D 909-2001 |
增压法测定航空汽油抗震性的试验方法 |
Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method (not available as separate reprint) (05.04) |
ANSI/ASTM D 91-1997 |
润滑油的沉淀值测试方法 |
Test Method for Precipitation Number of Lubricating Oils (05.01) |
ANSI/ASTM D 910-1995 |
航空汽油规范 |
Specification for Aviation Gasolines (05.01) |
ANSI/ASTM D 92-2001 |
用克利夫兰得开杯测定闪点和着火点的试验方法 |
Flash and Fire Points by Cleveland Open Cup, Method of Test for (04.04, 05.01, 10.03) |
ANSI/ASTM D 922d-2000 |
非硬质聚氯乙烯管规范 |
Specification for Nonrigid Vinyl Chloride Polymer Tubing |
ANSI/ASTM D 93-1990 |
用宾斯克-马丁密封杯试验机测定闪点的试验方法 |
Flash Point by Pensky-Martens Closed Tester, Method of Test for (04.09, 05.01, 06.01) |
ANSI/ASTM D 932-1997 |
水和水沉积物中铁滋生细菌的试验方法 |
Test Method for Iron Bacteria in Water and Water-Formed Deposits |