标准号 |
中文名称 |
英文名称 |
| ASTM D 5815-1995 |
用液相色谱法测定单面低密度聚乙烯酚氧化剂和掺合剂的标准试验方法 |
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) |
| ASTM D 5816-1996 |
碳黑的标准试验方法.多点氮吸收的外部表面积 |
Standard Test Methods for Carbon Black-External Surface Area of Multipoint Nitrogen Adsorption |
| ASTM D 5817-1996 |
碳黑,颗粒缩径和大型样品混合用标准规程 |
Standard Practice for Carbon Black, Pelleted-Reduction and Blending of Gross Samples |
| ASTM D 5818-1995 |
从安装损坏评估的试验阶段作地质合成物取样的标准规程 |
Standard Practice for Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage |
| ASTM D 5819-1998 |
地质合成物耐久性经验评估用选择试验方法的标准导则 |
Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability |
| ASTM D 5820-1995 |
双缝地质薄膜的加压气道评定的标准规程 |
Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 5821-2001 |
粗集料中碎颗粒百分率测定的标准试验方法 |
Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 5822-1995 |
可膨胀约束座垫测定接缝强度的标准试验方法 |
Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions |
| ASTM D 5823-1995 |
堆垛地面覆盖材料的线束高度的标准试验方法 |
Standard Test Method for Tuft Height of Pile Floor Coverings |
| ASTM D 5824-1998 |
纤维板暴露在热和水条件下粘结强度测定的标准试验方法 |
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 5826-1995 |
尺寸2至6x/7儿童身材测量表 |
Standard Tables of Body Measurements for Children, Sizes 2 to 6x/7 |
| ASTM D 5827-1995 |
用离子色谱法分析氯化物和其它阴离子的发动机冷却剂的标准试验方法 |
Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 5828-1997 |
辅助冷却添加剂(SCAs)和发动机冷却浓缩剂互换性的标准试验方法 |
Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
| ASTM D 5829-1996 |
环境分析实验室制订培训程序的标准导则 |
Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories |
| ASTM D 5830-1995 |
用气体色谱法在危验废料中溶剂分析的标准试验方法 |
Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography |
| ASTM D 5831-1996 |
土壤中筛分燃料的标准试验方法 |
Standard Test Method for Screening Fuels in Soils |
| ASTM D 5832-1998 |
活性炭样本中的活性挥发物测定的标准试验方法 |
Standard Test Method for Volatile Matter Content of Activated Carbon Samples |
| ASTM D 5833-1995 |
钢罐的再利用,再循环和再处理的标准指南 |
Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans |
| ASTM D 5834-1995 |
固体波纹纸板的再利用,再循环和再处理的标准指南 |
Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) |
| ASTM D 5835-1995 |
自动售货机的固定放射源抽样的集气测定的标准试验 |
Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations |
| ASTM D 5836-1995 |
大气中工作地点的2,4甲苯二异氰酸盐,2,6二异氰酸盐测定的标准试验方法 |
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
| ASTM D 5837-1995 |
用高性能液体色谱法(HPLC)测试电绝缘液中呋南化合物的标准试验方法 |
Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC) |
| ASTM D 5839-1996 |
能量发散X射线荧光光谱法分析危险废油中痕量素的标准试验方法 |
Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry |
| ASTM D 584-1996 |
原毛中羊毛含量实验室测试方法 |
Test Method for Wool Content of Raw Wool - Laboratory Scale |
| ASTM D 5840-1995 |
用于铺路建筑的沥青水泥的2型聚合体改型的标准规格 |
Standard Specification for Type II Polymer Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 5841-1995 |
用于铺路建筑的沥青水泥的3型聚合体改型的标准规格 |
Standard Specification for Type III Polymer Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 5842-1995 |
燃料挥发性测量的抽样和处理标准规程 |
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement |
| ASTM D 5843-1995 |
用于防水的完全粘合的硫化橡胶应用的标准指南 |
Standard Guide for Application of Fully Adhered Vulcanized rubber Sheets Used in Waterproofing |
| ASTM D 5844-1998 |
评价抑制生锈用汽车发动机油的标准试验方法(序列IID) |
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) |
| ASTM D 5845-2001 |
用红外线光谱法测定汽油中MTBE、ETBE、TAME、DIPE、甲醇、乙醇和叔丁醇的标准试验方法 |
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy |
| ASTM D 5846-1999 |
使用通用氧化试验仪器对液压液和涡轮机油进行通用氧化试验的标准试验方法 |
Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 5848-1998 |
绒纱线地板覆盖物单位面积质量的标准试验方法 |
Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings |
| ASTM D 5849-1995 |
评估改良的沥青屋顶薄膜周期性结点变位耐力的标准试验方法 |
Standard Test Method for Evaluating Resistance of Modified, Bituminous Roofing Membranes to Cyclic Joint Displacement |
| ASTM D 585-1997 |
纸张、纸板、纤维板和相关产品的单批取样和验收 |
Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard or Related Product |
| ASTM D 5850-1995 |
不完整井的网络测定过滤系数、储藏系数和各向异性比率的标准试验方法(分析程序) |
Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells |
| ASTM D 5851-1995 |
设计和执行水监控方案的标准导则 |
Standard Guide for Planning and Implementing a Water Monitoring Program |
| ASTM D 5852-1995 |
喷射指示法现场或实验室测定土壤腐蚀性的标准试验方法 |
Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method |
| ASTM D 5853-1995 |
原油倾点的标准测试方法 |
Standard Test Method for Pour Point of Crude Oils |
| ASTM D 5854-1996 |
石油和石油产品液体样品的混合及处理的标准规程 |
Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 5855-1995 |
流动井中恒定降深法测定受限非越流性或越流性含水土层过滤系统和储藏系统的标准试验方法(分析程序) |
Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well |
| ASTM D 5856-1995 |
使用刚性壁压缩模式磁导率计测量多孔性材料液压导电率的标准试验方法 |
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
| ASTM D 5857-2000 |
使用ISO协议和方法学的聚合塑料注塑和挤压材料的标准规范 |
Standard Specification for Propylene Plastic Injection and Extrusion Materials Using ISO Protocol and Methodology |
| ASTM D 5858-1996 |
使用多层弹性理论计算筑路材料原位相等弹性模量的标准导则 |
Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory |
| ASTM D 5859-1996 |
使用常变迎角试验机测定鞋类在涂层表面上的附着力的标准试验方法 |
Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester |
| ASTM D 586-1997 |
纸中灰分的试验方法 |
Test Method for Ash in Paper |
| ASTM D 5860-1995 |
评定防水处理对水硬水泥灰浆样品耐冷冻影响的标准试验方法 |
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| ASTM D 5861-1995 |
涂料粉末颗粒尺寸测量有效数的标准导则 |
Standard Guide for Significance of Particle Size Measurements of Coating Powders |
| ASTM D 5862-1999 |
评估二冲程循环涡轮增强马力6V92TA柴油发动机中发动机油的标准试验方法 |
Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine |
| ASTM D 5863-1995 |
火焰原子吸收分光光度法测定原油和残余燃料中镍、钒、铁和钠含量的标准试验方法 |
Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry |
| ASTM D 5864-1995 |
测定润滑油或其成分水中好氧生物降解的标准试验方法 |
Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components |
| ASTM D 5865-2001 |
煤和焦炭总热值的标准试验方法 |
Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865a-2001 |
煤和焦炭总热值的标准试验方法 |
Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5866-1995 |
棉纤维中棉结含量的标准测试方法(AFIS-N仪器) |
Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument) |
| ASTM D 5867-1995 |
用大容量仪器测量棉纤维物理性能的标准试验方法 |
Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments |
| ASTM D 5868-2001 |
纤维增强塑料粘结剂的边缘剪切粘着性标准试验方法 |
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 5869-1995 |
沥青材料的黑炉热暴露标准规程 |
Standard Practice for Dark Oven Heat Exposure of Bituminous Materials |
| ASTM D 5870-1995 |
计算塑料牢固性参数指数的标准规程 |
Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM D 5871-1998 |
环已烷原料用苯的标准规范 |
Standard Specification for Benzene for Cyclohexane Feedstock |
| ASTM D 5872-1995 |
亚表层水质探测装置安装和地理环境勘探的先进钻探方法的标准指南 |
Standard Guide for Use of Casing Advancement Drilling methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 5873-1995 |
用回弹锤法对岩石硬度测定的标准试验方法 |
Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method |
| ASTM D 5874-1995 |
测定土壤冲击值的标准试验方法 |
Standard Test Method for Determination of the Impact Value (IV) of a Soil |
| ASTM D 5875-1995 |
亚表层水质探测装置安装和地理环境取样方法和电缆工具钻探使用指南 |
Standard Guide for Use of Cable-Tool Drilling and Sampling methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 5876-1995 |
亚表层水质探测装置安装和地理环境直立旋转钢丝绳箱式先进钻探方法的使用标准指南 |
Standard Guide for Use of Direct Rotary Wireline Casing advancement Drilling Methods for Ge-oenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 5877-1995 |
基于数据分析计算的痕量素示意图和主要离子的地下水化学分析结果表示的标准指南 |
Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations |
| ASTM D 5878-2000 |
工程技术用岩石分级系统的使用标准指南 |
Standard Guide for Using Rock Mass Classification Systems for Engineering Purposes |
| ASTM D 5879-1995 |
现场腐化装置的地点表面特征的标准规程 |
Standard Practice for Surface Site Characterization for On-Site Septic Systems |
| ASTM D 5880-1995 |
地下流量和传送带模型的制造标准指南 |
Standard Guide for Subsurface Flow and Transport Modeling |
| ASTM D 5881-1995 |
根据铁芯头的随时变化用稳定边缘井对受压非泄漏含水土层的渗透性分析程序测定用标准试验方法 |
Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 5882-1996 |
桩柱的低应变完整性检测用标准试验方法 |
Standard Test Method for Low Strain Integrity Testing of Piles |
| ASTM D 5883-1996 |
园林设计及其有关用途用上层土中矿物质修正值,旋转窑生产的空心油岩、粘土或石片用标准指南 |
Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes |
| ASTM D 5884-1999 |
内增强地膜扯裂强度测定的标准试验方法 |
Standard Test Method for Determining Tearing Strength of internally Reinforced Geomembranes |
| ASTM D 5885-1997 |
用压差扫描热量测定法对聚烯烃土工合成织物的氧化感应时间的标准测定时间 |
Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
| ASTM D 5886-1995 |
透过特殊用途地膜的流体渗透率测试方法选择的标准指南 |
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
| ASTM D 5887-1999 |
使用可变形墙式渗透计透过饱和土工合成织物粘土衬垫样品指数通量测量的标准测试方法 |
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
| ASTM D 5888-1995 |
土工合成织物粘土衬垫的储存和搬运用标准指南 |
Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 5889-1997 |
土工合成织物粘土衬垫的质量控制标准操作规程 |
Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM D 589-1997 |
纸不透明度的试验方法 |
Test Method for Opacity of Paper |
| ASTM D 5890-1995 |
土工合成织物粘土衬垫的粘土矿物成分扩大检索的标准测试方法 |
Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners |
| ASTM D 5891-2001 |
土工合成粘土衬的粘土成分流失的标准试验方法 |
Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners |
| ASTM D 5892-1996 |
人行道建造用IV型石油历青聚合物改良水泥的标准规范 |
Standard Specification for Type IV Polymer-Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 5893-1996 |
硅酸盐水泥混凝土人行道用制冷用、单成分、化学固化硅联接防渗漏剂的标准规范 |
Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements |
| ASTM D 5894-1996 |
镀膜金属暴露于紫外线和环流盐雾的标准操作.(交替暴露在雾/干室和紫外线/浓缩室) |
Standard Practice for Cyclic Salt Fog/UV Exposure of painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 5895-2001 |
机械记录器用有机涂层烘干或硫化期间薄膜产生时间测量用标准试验方法 |
Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 5896-1996 |
纤维素材料的碳水化合物分配标准试验方法 |
Standard Test Method for Carbohydrate Distribution of Cellulosic Materials |
| ASTM D 5897-1996 |
用电位滴定转换方法对纤维素酯中羟基百分率测定的标准试验方法 |
Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration-Alternative Method |
| ASTM D 5898-1996 |
粘合防水屋顶标准细节的标准指南 |
Standard Guide for Standard Details for Adhered Sheet waterproofing |
| ASTM D 5899-1998 |
计算机管理系统中用橡胶化合材料用标准分类系统 |
Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems |
| ASTM D 590-1993 |
纸中石油蜡的测试方法 |
Test Method for Petroleum Wax in Paper |
| ASTM D 5900-1998 |
工业参考材料(IRM)的物理和化学特性的标准规范 |
Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM) |
| ASTM D 5901-1999 |
航空燃料冻结点的标准试验方法(自动光学方法) |
Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) |
| ASTM D 5902-1996 |
用碘值法对氢化丁腈橡胶中残留不科学物质橡胶测定的标准测试方法 |
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
| ASTM D 5903-1996 |
地下水取样结果的制备和规划标准指南 |
Standard Guide for Planning and Preparing for a Groundwater Sampling Event |
| ASTM D 5904-1996 |
用紫外线、过(二)硫酸盐氧化物和薄膜导电率检测法对水中的总含碳量、有机碳和无机碳的标准测试方法 |
Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM D 5905-1998 |
代用品废水准备的标准操作规程 |
Standard Practice for the Preparation of Substitute Wastewater |
| ASTM D 5906-1996 |
地表水深度的测量期间测量水平位置的标准指南 |
Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths |
| ASTM D 5907-1996 |
水中可过滤性和非过滤性物质的标准测试方法 |
Standard Test Method for Filterable and Nonfilterable Matter in Water |
| ASTM D 5908-1996 |
多酯非机织纤维的树脂粘合剂分配和粘合剂浸透性分析用标准测试方法 |
Standard Test Method for Resin Binder Distribution and Binder Penetration Analysis of Polyester Nonwoven Fabrics |
| ASTM D 5909-1996 |
耐低凝点高级润滑油浸透的氧化物干燥印刷油墨干燥时间的标准测试方法 |
Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance |
| ASTM D 5910-1996 |
用液相色谱法测定乳液聚合物中游离甲醛的标准测试方法 |
Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography |
| ASTM D 5911-1996 |
对土壤抽样基地表识的数据单最低限度的标准实用规程 |
Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site |
| ASTM D 5912-1996 |
根据铁芯头的随时变化用过阻尼井对非受压泄漏含水土层液压导电率的分析程序测定用标准试验方法 |
Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 5913-1996 |
油漆刷可清除干净性评定的标准测试方法 |
Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 5916-1996 |
用薄膜过滤法从水和被翠取的沉淀物中对产气荚膜梭菌的检测和计算用标准测试方法 |
Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF) |
| ASTM D 5917-1999 |
用气相色谱法和外部校验法在单环芳香烃中跟踪混杂物的标准试验方法 |
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 5918-1996 |
土壤的冻胀和降低溶解敏感性的标准测试方法 |
Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils |
| ASTM D 5919-1996 |
在 PPB 浓缩时吸附用微缩等温线技术对活性炭吸附能力测定用实用规程 |
Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations |
| ASTM D 5920-1996 |
用诺埃曼法各向异非承压含水层试验用标准测试方法(分析程序) |
Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method |
| ASTM D 5921-1996 |
定点腐烂系统成坑亚表层定位特性 |
Standard Practice for Subsurface Site Characterization of Pits for On-Site Septic Systems |
| ASTM D 5922-1996 |
地质现场调查中场地变化分析的标准导则 |
Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations |
| ASTM D 5923-1996 |
地质现场调查中可里格法选择的标准导则 |
Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations |
| ASTM D 5924-1996 |
地质现场调查中模拟近似法选择的标准导则 |
Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations |
| ASTM D 5925-1996 |
定点腐烂系统吸收区域轮廓斑和界限尺寸的标准实用规程 |
Standard Practice for reliminary Sizing and Delineation of Absorption Field Areas for On-Site Septic Systems |
| ASTM D 5926-2001 |
排水管、排废水和排气管(DWV)、下水沟、卫生设施和雨水管道系统用聚氯乙烯垫圈的标准规范 |
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
| ASTM D 5927-1999 |
基于ISO试验方法的热塑性聚酯(TPES)的选择和挤压材料的标准规范 |
Standard Specification for Thermoplastic Polyester (TPES) selection and Extrusion Materials Based on ISO Test Methods |
| ASTM D 5928-1996 |
放射性废弃物筛选标准试验方法 |
Standard Test Method for Screening of Waste for Radioactivity |
| ASTM D 5929-1996 |
用混合物吸收计测定暴露于城区固体废物销毁条件用生物降解能力标准测试方法 |
Standard Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting Conditions by Compost Respirometry |
| ASTM D 5930-1997 |
用瞬变线源技术方法对塑料热导性的标准试验方法 |
Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
| ASTM D 5931-1996 |
用数字密度计对发动机冷冻剂的浓缩和水般的发动机冷冻剂的标准测试方法 |
Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 5932-1996 |
在工作室空气中9-N-甲氨基甲基葸 (MAMA)对 2,4-甲苯聚氨酯(2,4-TDI)和2,6 -甲苯聚氨酯(2,6-TDI)测定的标准试验方法 |
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace |
| ASTM D 5933-1996 |
木结构用直经为25/8 in. 和4 in.的金属剪切板的标准规范 |
Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com