标准号 |
中文名称 |
英文名称 |
ASTM D 6407-1999 |
植物单宁材料中铁和铜的分析的标准试验方法 |
Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials |
ASTM D 6408-1999 |
鞣皮厂液剂分析的标准试验方法 |
Standard Test Method for Analysis of Tannery Liquors |
ASTM D 6409-1999 |
用羊皮割革刀的颜色试验的标准操作规程 |
Standard Practice for Color Tests with Sheepskin Skiver |
ASTM D 6410-1999 |
植物鞣皮液剂酸度测定的标准试验方法 |
Standard Test Method for Determining Acidity of Vegetable Tanning Liquors |
ASTM D 6411/D 6411M-1999 |
低释气性材料室温硫化硅酮橡胶的标准规范 |
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
ASTM D 6412/D 6412M-1999 |
用于粘结金属和非金属材料的环氧(柔性)粘结剂的标准规范 |
Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials |
ASTM D 6413-1999 |
织物火焰抗性的标准试验方法(垂直试验) |
Standard Test Method for Flame Resistance of Textiles (Vertical Test) |
ASTM D 6414-1999 |
通过酸提取或潮湿氧化/冷蒸气原子吸收对煤和煤燃烧残留物中总汞的标准试验方法 |
Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption |
ASTM D 6415-1999 |
纤维增强聚合物基质化合物的弯曲束强度测量的标准试验方法 |
Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite |
ASTM D 6416-1999 |
用于分配负载的单支撑三层化合板的二维柔韧特性的标准试验方法 |
Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
ASTM D 6416/D 6416M-1999 |
以分布荷载为条件的简单支撑夹层复合板双尺寸挠曲性能的标准试验方法 |
Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
ASTM D 6417-1999 |
用毛细管气相色谱法评定发动机油挥发性的标准试验方法 |
Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
ASTM D 6418-2001 |
使用一次性芯取样器取样和储存土壤用来分析挥发性有机化合物的标准实施规程 |
Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis |
ASTM D 6419-1999 |
非热固卷筒胶印油墨的挥发物含量的标准试验方法 |
Standard Test Method for Volatile Content of Non-Heatset Web Offset Printing Inks |
ASTM D 642-1994 |
船用集装箱、组合件和单体加载的抗压缩能力的测试方法 |
Test Method for Determining Compressive Resistance of Shipping Containers, Components and Unit Loads |
ASTM D 6420-1999 |
直接界面气相色谱质谱法对气态有机化合物测定的标准试验方法 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
ASTM D 6421-1999 |
Bench法评定汽车火花点燃式发动机燃料的电子口燃料喷油器结垢的试验方法 |
Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure |
ASTM D 6422-1999 |
汽油-乙醇混合液耐水性(相位分离)的试验方法 |
Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends |
ASTM D 6423-1999 |
测定酒精、变性燃料酒精和燃料酒精pH值的标准试验方法 |
Standard Test Method for Determination of pH of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85) |
ASTM D 6424-1999 |
测定自然吸气火花点燃式飞机发动机燃料辛烷值的标准实施规范 |
Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines |
ASTM D 6425-1999 |
用SRV试验机测量耐特高压(EP)润滑油摩擦和抗磨耗性质的标准试验方法 |
Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine |
ASTM D 6426-2001 |
测定馏出燃料油可过滤性的标准试验方法 |
Standard Test Method for Determining Filterability of Distillate Fuel Oils |
ASTM D 6427-1999 |
HFC-236fa、1,1,1,3,3,3-六氟丙烷的处理、运输和存储标准实施规范 |
Standard Practice for Handling, Transporation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3) |
ASTM D 6428-1999 |
通过氧化燃烧和电化学检测对液态芳香烃和其衍生物的总硫的标准试验方法 |
Standard Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection |
ASTM D 643-1997 |
用朔柏测试仪测试纸的折痕持久性的标准试验方法 |
Standard Test Method for Folding Endurance of Paper by the Schopper Tester |
ASTM D 6434-1999 |
选择柔性聚丙烯土工膜的试验方法的标准指南 |
Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes |
ASTM D 6435-1999 |
塑料制材和型材剪切性能的标准试验方法 |
Standard Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes |
ASTM D 6436-1999 |
塑料和热塑弹性体的报告特性的标准指南 |
Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
ASTM D 6437-1999 |
聚氨酯原材料的标准试验方法:低碱聚合物中的碱性(聚合物中CPR值的测定) |
Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols) |
ASTM D 6438-1999 |
用固相微提取气相色谱法对涂料和涂层中丙酮,甲基丙酮,对位氯苯三氟化物含量测定的标准试验方法 |
Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography |
ASTM D 6439-1999 |
蒸汽叶轮机、燃气轮机和水电轮机润滑系统的清洁、冲洗和净化标准指南 |
Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
ASTM D 644-1999 |
用炉烘干法测定纸和纸板中水分的试验方法 |
Test Method for Moisture Content of Paper and Paperboard by Oven Drying |
ASTM D 6440-2001 |
有关烃类树脂的标准术语 |
Standard Terminology Relating to Hydrocarbon Resins |
ASTM D 6441-1999 |
测量粉末涂层遮盖能力的标准试验方法 |
Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
ASTM D 6443-1999 |
波长色散X射线荧光光谱法测定未用润滑油和添加剂中钙、氯、铜、镁、磷、硫和锌的试验方法(数学修正程序) |
Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc, in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure) |
ASTM D 6445-1999 |
能量分散X射线荧光光谱法测定汽油中硫的标准试验方法 |
Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry |
ASTM D 6446-2001 |
评定航空燃料净燃烧热(比能)的标准试验方法 |
Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels |
ASTM D 6448-1999 |
取自已用润滑油的工业炉燃料的标准规范 |
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
ASTM D 645/D 645M-1997 |
纸和纸板厚度的试验方法 |
Test Method for Thickness of Paper and Paperboard |
ASTM D 6450-1999 |
用连续闭杯闪(CCCFP)试验仪测定闪点的标准试验方法 |
Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester |
ASTM D 6451-1999 |
沥青基防护板应用的标准指南 |
Standard Guide for Application of Asphalt Based Protection Board |
ASTM D 6452-1999 |
用于地下水质调查的井的净化方法的标准指南 |
Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations |
ASTM D 6456-1999 |
由聚酰亚胺树脂生产的精致部件的标准规范 |
Standard Specification for Finished Parts Made from Polyimide Resin |
ASTM D 6458-1999 |
尺寸为8至14和8至20的男孩身体测量用标准表 |
Standard Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular |
ASTM D 6459-1999 |
山坡防水土流失用雨水冲刷控制覆盖层(ECB)性能测定的标准试验方法 |
Standard Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Hillslopes from Rainfall-Induced Erosion |
ASTM D 646-1996 |
纸张及纸板的基本重量的试验方法(单位面积的重量) |
Test Method for Grammage of Paper and Paperboard (Weight Per Unit Area) |
ASTM D 6460-1999 |
土渠防雨水冲刷用冲刷控制覆盖层(ECB)性能测定的标准试验方法 |
Standard Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion |
ASTM D 6461-1999 |
拦淤栅栏用材料的标准规范 |
Standard Specification for Silt Fence Materials |
ASTM D 6462-1999 |
拦淤栅栏安装的标准实施规程 |
Standard Practice for Silt Fence Installation |
ASTM D 6464-1999 |
将石膏墙板紧固在木框架中用可伸缩泡沫胶粘剂标准规范 |
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM D 6466-1999 |
用Sirolan激光扫描纤维直径分析仪测定羊毛和其它动物纤维直径的标准试验方法 |
Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser |
ASTM D 6467-1999 |
用扭矩环剪切试验测定粘性土壤排水残余抗剪强度的标准试验方法 |
Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils |
ASTM D 6468-1999 |
蒸馏燃料高温稳定性的标准试验方法 |
Standard Test Method for High Temperature Stability of Distillate Fuels |
ASTM D 6469-1999 |
燃料和燃料系统中微生物污染的标准指南 |
Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 6470-1999 |
原油中盐的标准测试方法(电位滴定位) |
Standard Test Method for Salt in Crude Oils (Potentiometric Method) |
ASTM D 6474-1999 |
高温凝胶渗透色谱法测定聚烯烃分子量分布和平均分子量的标准试验方法 |
Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
ASTM D 6476-2000 |
充气限制织物动态空气渗透性测定的标准试验方法 |
Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics |
ASTM D 6477-1999 |
轮胎帘线和帘布的相关标准术语 |
Standard Termninology Relating to Tire Cord and Fabrics |
ASTM D 6478-2000 |
测定充气限制织物特别密封性的标准试验方法 |
Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints |
ASTM D 6479-2001 |
测定充气减震用机织织物边角耐精梳性的标准试验方法 |
Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints |
ASTM D 648-2001 |
在挠曲负荷下塑料横向位置挠曲温度的标准测试方法 |
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
ASTM D 6482-2001 |
用搅拌冷却曲线分析法测定含水聚合物冷却剂的冷却特性的标准试验方法(Tensi法) |
Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
ASTM D 6483-1999 |
评定柴油发动机用油的标准试验方法 |
Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine |
ASTM D 6486-2001 |
汽车涂层的短时暴露的标准实施规程 |
Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
ASTM D 6487-2001 |
胶印彩色打样机用糊状印刷油墨的印刷准备的标准实施规范 |
Standard Practice for Preparing Prints of Paste Printing Inks With an Offset Color Proofing Press |
ASTM D 6488-1999 |
印刷问题的相关标准术语 |
Standard Terminology Relating to Print Problems |
ASTM D 6491-1999 |
干热试验中预应力预涂金属抗老化性评定的标准实施规程 |
Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test |
ASTM D 6493-1999 |
自动环球仪测定烃类树脂软化点的标准试验方法 |
Standard Test Method for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus |
ASTM D 6495-1999 |
地面粘土衬认可检验要求的标准指南 |
Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners |
ASTM D 6503-1999 |
用Enterolert测定水中肠球菌的标准试验方法 |
Standard Test Method for Enterococci in Water Using EnterolertTM |
ASTM D 6504-2000 |
高纯度水中阳离子导电性的直接测定标准实施规程 |
Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water |
ASTM D 6505-2000 |
检定丙基溴含量的标准试验方法 |
Standard Test Method for Assay of normal-Propyl Bromide Content |
ASTM D 6506-2001 |
地下防水用沥青层保护的标准规范 |
Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing |
ASTM D 6512-2000 |
实验室间数值预测的标准规程 |
Standard Practice for Interlaboratory Quantitation Estimate |
ASTM D 6518-2001 |
煤机械取样系统边缘试验的标准实施规程 |
Standard Practice for Bias Testing a Mechanical Coal Sampling System |
ASTM D 6519-2000 |
用液压控固定活塞采样器进行土壤抽样的标准规程 |
Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler |
ASTM D 653-2001 |
土壤、岩石和所含液体的相关标准术语 |
Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM D 6530-2000 |
冷却塔水中总活性生物体的标准试验方法 |
Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA) |
ASTM D 6534-2000 |
测定机械泵分散器推动力的标准试验方法 |
Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser |
ASTM D 6535-2000 |
测定机械泵计量器浸入管长度的标准试验方法 |
Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser |
ASTM D 6536-2000 |
测定机械泵计量器浸入管长度的标准试验方法 |
Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser |
ASTM D 6537-2000 |
包装性能测定用装配仪表的包装冲击试验的标准实施规程 |
Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance |
ASTM D 6538-2000 |
使用自动取样器的废水取样标准指南 |
Standard Guide for Sampling Wastewater With Automatic Samplers |
ASTM D 6539-2000 |
用流动空气测定局部饱水孔隙材料气动渗透性的标准试验方法 |
Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air |
ASTM D 6540-2000 |
绒头纱线地板覆盖物的加速染污标准试验方法 |
Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering |
ASTM D 6541-2000 |
HFC-236fa、1,1,1,3,3,3-六氟丙烷的标准规范 |
Standard Specification for HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane, (CF3CH2CF3) |
ASTM D 6542-2000 |
计算堆料中煤吨数的标准规程 |
Standard Practice for Tonnage Calculation of Coal in a Stockpile |
ASTM D 6543-2000 |
用流线煤分析仪进行的测量评价的标准指南 |
Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers |
ASTM D 6544-2000 |
紫外线(UV)透射试验前纺织品制备的标准实施规程 |
Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing |
ASTM D 6546-2000 |
工业液压液用弹性密封件能力测定的标准试验方法和建议极限值 |
Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications |
ASTM D 6547-2000 |
双金属电偶用润滑液防腐性能的标准试验方法 |
Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
ASTM D 6548-2000 |
薄棉卫生纸抗机械穿透性的标准试验方法 |
Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
ASTM D 6549-2001 |
搅拌冷却曲线分析法测定冷却剂冷却特性的标准试验方法(Drayton装置) |
Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) |
ASTM D 6550-2000 |
超临界液相色谱法测定汽油中烯烃含量的标准试验方法 |
Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography |
ASTM D 6551-2000 |
用氙弧曝光器具对压敏胶带做加速老化试验的标准实施规程 |
Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus |
ASTM D 6552-2000 |
控制和表征称量聚集的悬浮颗粒的误差的标准规程 |
Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
ASTM D 6553-2000 |
导轨润滑剂冷却能力的标准试验方法 |
Standard Test Method for Coolant Compatibility of Way Lubricants |
ASTM D 6555-2000 |
木制反复使用组件的系统效果评定指南 |
Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies |
ASTM D 6556-2000 |
炭黑的标准试验方法.氮吸收法测定总的和外部表面积 |
Standard Test Method for Carbon Black--Total and External Surface Area by Nitrogen Adsorption |
ASTM D 6556a-2001 |
炭黑的标准试验方法.氮吸收法测定总的和外部表面积 |
Standard Test Method for Carbon Black - Total and External Surface Area by Nitrogen Adsorption |
ASTM D 6558-2000 |
碳阳极和阴极块的TGA CO2反应率测定标准试验方法 |
Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks |
ASTM D 6559-2000 |
碳阳极和阴极块的TGA气体反应率测定标准试验方法 |
Standard Test Method for Determination of TGA Air Reactivity of Baked Carbon Anodes and Cathode Blocks |
ASTM D 656-1987 |
纯甲苯红色调色剂 |
Pure Toluidine Red Toner |
ASTM D 6560-2000 |
原油和石油产品中沥青质(庚烷不溶物)测定的标准试验方法 |
Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products |
ASTM D 6561-2000 |
利用(甲氧基-2-苯基-1)哌嗪(MOPIP)测定工作场所空气中气溶胶单体和低聚二异腈酸己二酯(HDI)的标准试验方法 |
Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2-phenyl-1) Piperazine (MOPIP) in the Workplace |
ASTM D 6562-2000 |
利用9-(N-甲氨基甲基)蒽(MAMA)法测定工作场所空气中气态二异腈酸己二酯(HDI)的标准试验方法 |
Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace |
ASTM D 6563-2000 |
用毛细管柱气相色谱法分析苯、甲苯、二甲苯及三者浓缩物的试验方法 |
Test Method for Benzene, Toluene, Xylene, (BTX)Concentrates Analysis by Capillary Column Gas Chromatography |
ASTM D 6569-2000 |
pH1在线测量的标准试验方法 |
Standard Test Method for On-Line Measurement of pH1 |
ASTM D 6570-2000 |
机械分级木材指定允许特性的标准实施规程 |
Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber |
ASTM D 6573/D 6573M-2000 |
通用铁丝订的货运箱标准规范 |
Standard Specification for General Purpose Wirebound Shipping Boxes |
ASTM D 6577-2000 |
工业防护覆层试验的标准指南 |
Standard Guide for Testing Industrial Protective Coatings |
ASTM D 6578-2000 |
耐涂写性测定的标准实施规程 |
Standard Practice for Determination of Graffiti Resistance |
ASTM D 6579-2000 |
尺寸筛析色谱法测定烃和萜烯树脂平均分子量和分子量分布的标准实施规程 |
Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography |
ASTM D 658-1991 |
鼓风磨蚀试验测定有机涂料耐磨性能试验方法 |
Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive |
ASTM D 6580-2000 |
锌粉涂料与锌粉涂料硫化薄膜和富锌涂层硫化薄膜中金属锌含量测定的标准试验方法 |
Standard Test Method for The Determination of Metallic Zinc Content in both Zinc Dust Pigment and in Cured Films of Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings |
ASTM D 6583-2000 |
涂料薄膜孔隙度的标准试验方法 |
Standard Test Method for Porosity of Paint Film |
ASTM D 6584-2000 |
气相色谱法测定B-100生物柴油甲酯中自由甘醇和甘醇总值的试验方法 |
Test Method for Determination of Free and Total Glycerine in B-100 Biodiesel Methyl Esters by Gas Chromatography |
ASTM D 6592-2001 |
轻便式化学发光水质测定的标准试验方法 |
Standard Test Method for Portable Chemiluminescent Water Quality Determination |
ASTM D 6593-2001 |
低温和轻型条件下运行的、以汽油为燃料的火花点火式内燃发动机内对抑制沉积物形成的汽车机油评价的标准试验方法 |
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
ASTM D 6594-2001 |
135℃时柴油机油腐蚀性评价的标准试验方法 |
Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135oC |