标准号 |
中文名称 |
英文名称 |
| ANSI/ISA S 75.15-1993 |
对焊端球状控制阀的面对面尺寸(ANSI等级150、300、600、900、1500、2500) |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/ISA S 75.19.01-2001 |
控制阀的静水试验 |
Hydrostatic Testing of Control Valves |
| ANSI/ISA S 77.20-1993 |
烧矿物燃料的动力设备模拟器.功能要求 |
Fossil-Fuel Power Plant Simulators - Functional Requirements |
| ANSI/ISA S 77.42.01-1999 |
化石燃料工厂回水控制系统.鼓型 |
Fossil Fuel Plant Feedwater Control System - Drum Type |
| ANSI/ISA S 77.44-1994 |
烧矿物燃料设备蒸气温度控制系统.筒式 |
Fossil Fuel Plant Steam Temperature Control System - Drum Type |
| ANSI/ISA S 77.70-1994 |
烧矿物燃料动力设备管道安装 |
Fossil Fuel Power Plant Instrument Piping Installation |
| ANSI/ISA S 82.02.02-1996 |
测量、控制和实验室用电力设备的安全要求 |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use |
| ANSI/ISA S 82.02.04-1996 |
测量、控制和实验室用电力设备的安全要求.第2-032部分:电测量和试验用手持电流线夹的特殊要求 |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test |
| ANSI/ISA S 84.01-1996 |
加工工业的安全仪器化系统的应用 |
Application of Safety Instrumented Systems for the Process Industries |
| ANSI/ISA S 92.02.01 Part 1-1998 |
氧化氯探测仪的性能要求(50-1000ppm全尺寸) |
Performance Requirements for Chlorine Monoxide Detection Instruments (50-1000 ppm Full Scale) |
| ANSI/ISA S 92.04.01 Part I-1996 |
探测缺氧或含氧丰富的空气用仪器的性能要求 |
Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Enriched Atmospheres |
| ANSI/ISDI 102-1993 |
隔离钢门系统安装标准 |
Installation Standard for Insulated Steel Door Systems |
| ANSI/ISDI 104-1993 |
隔离钢门系统透水性能标准 |
Water Penetration Performance Standard for Insulated Steel Door Systems |
| ANSI/ISDSI 100-1990 |
隔离钢门系统的尺寸标准和装配公差 |
Door Size Dimensional Standard and Assembly Tolerances for Insulated Steel Door Systems |
| ANSI/ISDSI 101-1983 |
隔离钢门系统的空气渗透性能标准 |
Air Infiltration Performance Standard for Insulated Steel Door Systems |
| ANSI/ISDSI 103-1990 |
隔离钢门系统的声学性能标准 |
Acoustical Performance Standard for Insulated Steel Door Systems |
| ANSI/ISDSI 105-1990 |
隔离钢门系统机械性能标准 |
Mechanical Performance Standard for Insulated Steel Door Systems |
| ANSI/ISEA 101-1996 |
有限使用和一次性防护服.尺寸和标签要求 |
Limited-Use and Disposable Coveralls - Size and Labeling Requirements |
| ANSI/ISEA 102-1990 |
气体检测管.在工作环境中毒气和毒蒸汽的快速检测型 |
Gas Detector Tube Units - Short-Term Type for Toxic Gases and Vapors in Working Environments |
| ANSI/ISEA 104-1998 |
空气抽样装置.工作场所中气体和蒸气的扩散类型 |
Air Sampling Devices - Diffusive Type for Gases and Vapors in Working Environments |
| ANSI/ISEA 107-1999 |
高可视安全服装 |
High Visibility Safety Apparel |
| ANSI/ISEA 107-2004 |
高能见度安全服装 |
|
| ANSI/ISEA 107-2004 |
高能见度安全服装 |
|
| ANSI/ISEA 110-2003 |
空气净化呼吸保护逃生设备 |
(Air-Purifying Respiratory Protective Escape Devices ) |
| ANSI/ISO 1203-1984 |
摄影技术.胶卷相机.后窗位置和画面尺寸 |
Photography - Roll Film Cameras - Back Window Location and Picture Sizes |
| ANSI/ISO 14004-1996 |
环境管理系统.原理、系统和技术支持通用导则 |
Environmental Management Systems - General Guidelines on Principles, Systems and Supporting Techniques |
| ANSI/ISO 14010-1996 |
环境审核指南.一般原理 |
Guidelines for Environmental Auditing - General Principles |
| ANSI/ISO 14011-1996 |
环境审核指南.审核程序.环境管理系统的审核 |
Guidelines for Environmental Auditing - Audit Procedures - Auditing of Environmental Management Systems |
| ANSI/ISO 14012-1996 |
环境审核指南.审核程序.环境审核员的资格标准 |
Guidelines for Environmental Auditing - Qualification Criteria for Environmental Auditors |
| ANSI/ISO 14040-1997 |
环境管理.生物圈评价.原则和框架 |
Environmental Management - Life Cycle Assessment - Principles and Framework |
| ANSI/ISO 1860-1988 |
信息处理.用于互换测试设备用的信息处理精密磁带盘 |
Information Processing - Precision Reels for Magnetic Tape Used in Interchange Instrumentation Applications |
| ANSI/ISO 2690-1997 |
仪器用无记录的磁带.物理特性和试验方法 |
Unrecorded Magnetic Tapes for Instrumentation Applications - Physical Properties and Test Methods |
| ANSI/ISO 3334-1991 |
缩微照相.ISO分辨率测试卡2号.描述和使用 |
Micrographics - ISO Resolution Test Chart No. 2 - Description and Use |
| ANSI/ISO 3665-1996 |
摄影.口内牙科摄影胶片.规范 |
Photography - Intra-oral Dental Photographic Film - Specification |
| ANSI/ISO 4341-1978 |
信息交换用盒式磁带编码键筒标签和存储器构造 |
Magnetic Tape Cassette and Cartridge Labeling and File Structure for Information Interchange |
| ANSI/ISO 4873-1991 |
信息处理.信息交换用位代码.结构和实施准则 |
Information Processing - Bit Code for Information Interchange - Structure and Rules for Implementation |
| ANSI/ISO 4909-1989 |
银行卡.3磁道磁带数据量 |
Bank Card - Magnetic Stripe Data Content for Track 3 |
| ANSI/ISO 5-2-1985 |
摄影技术.密度测量.第2部分:透射密度的几何条件 |
Photography - Density Measurements - Part 2: Geometric Conditions for Transmission Density |
| ANSI/ISO 5609-1989 |
装转位刀片的镗杆.尺寸 |
Boring Bars for Indexable Inserts - Dimensions |
| ANSI/ISO 5609-2004 |
可转位刀片用镗杆.尺寸 |
|
| ANSI/ISO 5654-2-1982 |
信息处理.利用13262ftprad单面双频预记录在200mm(8in)盒式软盘上的数据交换.第2部分:磁道格式 |
Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Two-Frequency Pre-Recording at 13 262 ftprad on One Side - Part 2: Track Format |
| ANSI/ISO 5800-1987 |
摄影技术.静物照相用彩色负片的ISO感光速度测定 |
Photography - Colour negative films for still photography - Determination of ISO speed |
| ANSI/ISO 5807-1985 |
信息处理.数据、程序和系统流程图、程序网络图和系统资源图的文件符号和协议 |
Information Processing - Documentation Symbols and Conventions for Data, Program and Systems Flowcharts, Program Network Charts, and System Resources Charts |
| ANSI/ISO 6-1993 |
摄影.黑白图示静物摄影机底片/冲洗系统.ISO速度的测定 |
Photography - Black-and-White Pictorial Still Camera Negative Film/Process Systems - Determination of ISO Speed |
| ANSI/ISO 6053-1979 |
摄影技术(摄影机).快门线释放端和座孔的尺寸 |
Photography (Cameras) - Shutter Cable Release and Socket - Dimensions |
| ANSI/ISO 6221-1996 |
成像材料.胶片和感光纸.尺寸变化的测定 |
Imaging Materials - Films and Papers - Determination of Dimensional Change |
| ANSI/ISO 6462-1983 |
带可转位刀片的平面铣刀.尺寸 |
Face Milling Cutters with Indexable Inserts - Dimensions |
| ANSI/ISO 6596-2-1985 |
信息处理.利用7958ftpard1.9tpmm(48tpi)单面双频预记录在130mm(5.25in)盒式软盘上的数据交换.第2部分:磁道格式 |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges using Two-Frequency Recording at 7 958 ftpard, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format |
| ANSI/ISO 6986-1983 |
带可转位刀片的侧面和平面铣刀.尺寸 |
Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions |
| ANSI/ISO 7004-1987 |
摄影.工业用射线摄影胶片.X和Y射线辐射时ISO速度和平均对比度的测定 |
Photography - Industrial Radiographic Film - Determination of ISO Speed and Average Gradient When Exposed to X- and y-Radiation |
| ANSI/ISO 7065-2-1985 |
信息处理.利用13262ftprad1.9tpmm(48tpi)双面改频调制记录在200mm(8in)盒式软盘上的数据交换.第2部分:磁道格式 |
Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 2: Track Format |
| ANSI/ISO 7487-2-1985 |
信息处理.利用7958ftpard1.9tpmm(48tpi)双面改频调制记录在130mm(5.25in)盒式软盘上的数据交换.第2部分:磁道格式A |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftpard, 1,9 tpmm (48 tpi), on Both Sides - Part 2: Track Format A |
| ANSI/ISO 7487-3-1986 |
信息处理.利用7958ftpard1.9tpmm(48tpi)双面改频调制记录在130mm(5.25in)盒式软盘上的数据交换.第3部分:磁道格式B |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftpard, 1,9 tpmm (48 tpi), on both sides - Part 3: Track Format B |
| ANSI/ISO 7589-1984 |
摄影感光测定的光源:日光和白炽钨丝灯 |
Illuminants for Photographic Sensitometry: Daylight and Incandescent Tungsten |
| ANSI/ISO 7816-1-1987 |
识别卡.带触点的集成电路.第1部分:物理特性 |
Identification Cards - Integrated Circuit(s) with Contacts - Part 1: Physical Characteristics |
| ANSI/ISO 7816-2-1988 |
识别卡.带触点的集成电路.第2部分:触点的尺寸和位置 |
Identification Cards - Integrated Circuit(s) with Contacts - Part 2: Dimensions and Location of the Contacts |
| ANSI/ISO 7829-1986 |
摄影(感光测定).航空照相用黑白胶片.ISO感光度平均梯度的测定 |
Photography (sensitometry) - Black-and-white aerial camera films - Determination of ISO speed and average gradient |
| ANSI/ISO 8225-1995 |
成像材料.氨水冲洗的重氮摄影胶片.稳定性规范 |
Imaging Materials - Ammonia-Processed Diazo Photographic Film - Specifications for Stability |
| ANSI/ISO 8378-2-1986 |
信息处理.利用13262ftprad1.9tpmm(48tpi)双面改频调制记录在200mm(8in)盒式软盘上的数据交换.第2部分:磁道格式A |
Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 2: Track Format A |
| ANSI/ISO 8378-3-1986 |
信息处理.使用改进调频以7958ftprad、3.8tpmm(96tpi)双面记录在130mm(5.24in)盒式软盘上的数据交换.第3部分:磁道格式B |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 3: Track Format B |
| ANSI/ISO 8478-1996 |
摄影.摄影机镜头.测量ISO光谱透射率的方法 |
Photography - Camera Lenses - Method for Measuring ISO Spectral Transmittance |
| ANSI/ISO 8630-2-1987 |
信息处理.以13262ftprad每面80磁道的改频调制记录在130mm(5.25in)盒式软盘上的数据交换.第2部分:77道的磁道格式A |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 2: Track format A for 77 Tracks |
| ANSI/ISO 8630-3-1987 |
信息处理.以13262ftprad每面80磁道的改频调制记录在130mm(5.25in)盒式软盘上的数据交换.第3部分:80道的磁道格式B |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 3: Track Format B for 80 Tracks |
| ANSI/ISO 8776-1988 |
成像介质.摄影胶片.折叠耐久度的测定 |
Imaging Media - Photographic Film - Determination of Folding Endurance |
| ANSI/ISO 8802.3-1988 |
局域网.载波侦听多路访问/冲突检测的存取法和物理层规范 |
Local Area Networks - Carrier Sense Multiple Access with Collision Detecting (CSMA/CD) Access Method and Physical Layer Specifications |
| ANSI/ISO 8860-2-1987 |
信息处理.以7958ftprad每面80磁道的改频调制记录在90mm(3.5in)盒式软盘上的数据交换.第2部分:磁道格式 |
Information Processing - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad on 80 Tracks on Each Side - Part 2: Track Format |
| ANSI/ISO 9335-1995 |
光学和光学仪器.光学传递函数.测量原理和程序 |
Optics and Optical Instruments - Optical Transfer Function - Principles and Procedures of Measurement |
| ANSI/ISO 9529-2-1989 |
信息处理系统.以15916ftprad每面80磁道的改频调制记录在90mm(3.5in)盒式软盘上的数据交换.第2部分:磁道格式 |
Information Processing Systems - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 15 916 ftprad on 80 tracks on Each Side - Part 2: Track Format |
| ANSI/ISO 9592-1-1989 |
信息技术系统.计算机制图.程序员分层交互制图系统(PHIGS).第1部分:功能描述 |
Information Processing Systems - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) (Part 1: Functional Description) |
| ANSI/ISO 9592-1a-1992 |
信息处理系统.计算机制图.程序员分层交互制图系统(PHIGS).第1部分:功能描述.修改件1 |
Information Processing Systems - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) - Part 1: Functional Description - Amendment 1 |
| ANSI/ISO 9592-2-1989 |
信息处理系统.计算机制图.程序员分层交互制图系统(PHIGS).第2部分:档案文件格式 |
Information Processing Systems - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) (Part 2: Archive File Format) |
| ANSI/ISO 9592-2a-1992 |
信息处理系统.计算机制图.程序员分层交互制图系统(PHIGS).第2部分:档案文件格式.修改件1 |
Information Processing Systems - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) - Part 2: Archive File Format - Amendment 1 |
| ANSI/ISO 9592-3-1989 |
信息技术系统.计算机制图.程序员分层交互制图系统(PHIGS). 第3部分:档案文件的明码电文的编码 |
Information Processing Systems - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) (Part 3: Clear Text Encoding of Archive File) |
| ANSI/ISO 9592-3a-1992 |
信息处理系统.计算机制图.程序员分层交互制图系统(PHIGS). 第3部分:档案文件明码电文编码.修改件1 |
Information Processing Systems - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) - Part 3: Clear Text Encoding of Archive File - Amendment 1 |
| ANSI/ISO 9592-4-1992 |
信息处理系统.计算机制图.程序员分层交互制图系统(PHIGS). 第4部分:PHIGS PLUS |
Information Processing Systems - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) - Part 4: Plus Lumiere and Surfaces, PHIGS PLUS |
| ANSI/ISO 9593-3-1990 |
信息技术.机算机制图.程序员分层交互制图系统(PHIGS)语言汇编.第3部分:Ada语言 |
Information Technology - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) Language Bindings (Part 3: Ada) |
| ANSI/ISO 9593-4-1991 |
信息技术.机算机制图.程序员分层交互制图系统(PHIGS)语言汇编.第4部分:C语言 |
Information Technology - Computer Graphics - Programmer-s Hierarchical Interactive Graphics System (PHIGS) Language Bindings (Part 4: C) |
| ANSI/ISO 9899-1990 |
程序设计语言.C语言 |
Programming Languages - C |
| ANSI/sort/ISO/ASQ 9000-2-1997 |
质量管理和质量保证标准.第2部分:ISO 9001、ISO9002、ISO9003应用的通用导则 |
Quality Management and Quality Assurance Standards-Part 2: Generic Guidelines for the Application of ISO 9001, ISO 9002 and ISO 9003 |
| ANSI/sort/ISO/ASQ E14001-2004 |
环境管理系统.使用规范和指南 |
|
| ANSI/sort/ISO/ASQ Q 10006-1997 |
质量管理.项目管理质量导则 |
Quality Management - Guidelines to Quality in Project Management |
| ANSI/sort/ISO/ASQ QE19011S-2004 |
质量和/或环境管理系统审核指南.附加的补充指南US版 |
|
| ANSI/sort/ISO/ASQ Z 1.13-1998 |
质量系统研究导则 |
Quality Systems Guidelines for Research |
| ANSI/sort/ISO/ASQC 10007-1995 |
质量管理.结构管理导则 |
Quality Management - Guidelines for Configuration Management |
| ANSI/sort/ISO/ASQC A 3534-2-1993 |
统计学.词汇和符号.统计质量控制 |
Statistics - Vocabulary and Symbols - Statistical Quality Control |
| ANSI/sort/ISO/ASQC Q 10007-1995 |
质量管理.配置管理导则 |
Quality Management - Guidelines for Configuration Management |
| ANSI/sort/ISO/ASQC Q 10013-1995 |
制定质量手册导则 |
Guidelines for Developing Quality Manuals |
| ANSI/sort/ISO/ASQC Q 9000-2-1993 |
质量管理和质量保证标准.ANSI/sort/ISO/ASQC Q9001、Q9002、Q9003应用的通用导则 |
Quality Management and Quality Assurance Standards - Generic Guidelines for the Application of ANSI/sort/ISO/ASQC Q9001, Q9002, and Q9003 |
| ANSI/sort/ISO/ASQC Q 9000-3-1991 |
质量管理和质量保证标准.关于软件开发提供和维护的ANSI/sort/ISO/ASQC Q9001的应用导则 |
Quality Management and Quality Assurance Standards - Guidelines for the Application of ANSI/sort/ISO/ASQC 9001 to the Development, Supply and Maintenance of Software |
| ANSI/sort/ISO/ASQC Q 9004-2-1991 |
质量管理和质量保证素.服务导则 |
Quality Management and Quality Assurance Elements - Guideline for Service |
| ANSI/sort/ISO/ASQC Q 9004-3-1993 |
质量管理和质量保证素.加工材料导则 |
Quality Management and Quality System Elements - Guidelines for Processed Materials |
| ANSI/sort/ISO/ASQC Q 9004-4-1993 |
质量管理和质量保证素.质量改进导则 |
Quality Management and Quality Elements - Guidelines for Quality Improvement |
| ANSI/sort/ISO/IEC 10641-1993 |
信息技术.计算机图形和图像处理.图形标准实现的一致性测试 |
Information Technology - Computer Graphics and Image Processing - Conformance Testing of Implementations of Graphic Standards |
| ANSI/sort/ISO/IEC 10994-1992 |
信息技术.使用每面80磁道以31831ftprad改良的频率调制记录的90mm盒式软盘上进行的数据交换.ISO类型303 |
Information Technology - Data Interchange on 90mm Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 31 831 ftprad on 80 Tracks on Each Side - ISO Type 303 |
| ANSI/sort/ISO/IEC 11072-1992 |
信息技术.计算机制图学.计算机制图参考模型 |
Information Technology - Computer Graphics - Computer Graphics Reference Model |
| ANSI/sort/ISO/IEC 11319-1993 |
信息技术.信息交换用8mm宽盒式磁带.螺旋扫描记录 |
Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording |
| ANSI/sort/ISO/IEC 11404-1996 |
信息技术.程序设计语言及其环境和系统软件接口.语言.独立数据类型 |
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Language - Independent Datatypes |
| ANSI/sort/ISO/IEC 11529-1-2004 |
铣刀.名称与符号.第1部分:实心或镶刃设计的柄式端铣刀 |
|
| ANSI/sort/ISO/IEC 11529-1-2004 |
铣刀.名称与符号.第1部分:实心或镶刃设计的柄式端铣刀 |
(Milling cutters - Designation - Part 1: Shank type end mills of solid or tipped design ) |
| ANSI/sort/ISO/IEC 11529-2-2004 |
铣刀.名称与符号.第2部分:带可转位刀片的柄式和孔式铣刀 |
|
| ANSI/sort/ISO/IEC 11529-2-2004 |
铣刀.名称与符号.第2部分:带可转位刀片的柄式和孔式铣刀 |
(Milling cutters - Designation - Part 2 - Shank type and bore type milling cutters with the indexable inserts ) |
| ANSI/sort/ISO/IEC 11557-1992 |
信息技术.信息交换用宽3.81毫米的盒式磁带.螺旋扫描录制.使用长60米和90米磁带的DDS-DC格式 |
Information Technology - 3.81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-DC Format Using 60 m and 90 m Length Tapes |
| ANSI/sort/ISO/IEC 11571-1994 |
信息技术.系统间电信和信息交换.标准号和分寻址专用综合服务网 |
Information Technology - Telecommunications and Information Exchange Between Systems - Numbering and Sub-addressing Private Integrated Services Networks |
| ANSI/sort/ISO/IEC 11572-1994 |
信息技术.系统间电信和信息交换.专用综合服务网.电路模式荷载服务.可交换信令程序和协议 |
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Circuit Mode Bearer Services - Inter-exchange Signalling Procedures and Protocol |
| ANSI/sort/ISO/IEC 11574-1994 |
信息技术.系统间电信和信息交换.专用综合服务网.电路模式64kbit/s荷载服务.服务描述、功能特性和信息流 |
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Circuit-mode 64 kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows |
| ANSI/sort/ISO/IEC 11576-1994 |
信息技术.数据压缩丢失算法的记录程序 |
Information Technology - Procedure for the Registration of Algorithms for the Lossless Compression of Data |
| ANSI/sort/ISO/IEC 11579-1 Technical Corrigendum 1-1996 |
信息技术.系统间电信和信息交换.专用综合服务网.第1部分:PISN交换用参考配置 |
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Part 1: Reference Configuration for PISN Exchanges (PINX) Technical Corrigendum 1 |
| ANSI/sort/ISO/IEC 11579-1-1994 |
信息技术.系统间电信和信息交换.专用综合服务网.第1部分:PISN交换用参考配置 |
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Part 1: Reference Configuration for PISN Exchanges (PINX) |
| ANSI/sort/ISO/IEC 11694-1-1994 |
识别卡.光存储卡.线性录制方法.第1部分:物理特性 |
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 1: Physical Characteristics |
| ANSI/sort/ISO/IEC 11730-1994 |
信息技术.程序设计语言.形式接口管理系统 |
Information Technology - Programming Languages - Form Interface Management System |
| ANSI/sort/ISO/IEC 12087-1-1995 |
信息技术.计算机制图和图像处理.图像处理和交换.功能规范.第1部分:成像的通用体系结构 |
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional Specification - Part 1: Common Architecture for Imaging |
| ANSI/sort/ISO/IEC 12087-2-1994 |
信息技术.计算机图形和图像处理.图像处理和交换(IPI).功能规范.第2部分:程序员图像核心系统应用程序接口 |
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional Specification - Part 2: Programmer-s Imaging Kernel System Application Program Interface |
| ANSI/sort/ISO/IEC 12087-3 AMD 1-1996 |
信息技术.计算机制图和图像处理.图像处理和交换.功能规范.第3部分:图像交换设施.修改件1:图像交换设施的类型定义、范围和逻辑视图 |
|
| ANSI/sort/ISO/IEC 12087-3-1995 |
信息技术.计算机制图和图像处理.图像处理和交换.功能规范.第3部分:图像交换设施 |
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional Specification - Part 3: Image Interchange Facility (IIF) |
| ANSI/sort/ISO/IEC 12088-4-1995 |
信息技术.计算机制图和图像处理.图像处理和交换.应用程序接口语言汇编.第4部分:C语言 |
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange - Application Program Interface Language Bindings - Part 4: C |
| ANSI/sort/ISO/IEC 12246-1993 |
信息技术.信息交换用双向格式8mm宽盒式磁带.螺旋扫描记录 |
Information Technology - 8 mm Wide Magnetic Tape Cartridge Dual Azimuth Format for Information Interchange - Helical Scan Recording |
| ANSI/sort/ISO/IEC 12248-1993 |
信息技术.信息交换用3.81mm宽盒式磁带.螺旋扫描记录.使用60m和90m长度磁带的DATA/DAT-DC格式 |
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DATA/DAT-DC Format Using 60 m and 90 m Length Tapes |
| ANSI/sort/ISO/IEC 13249-5-2001 |
信息技术.数据库语言.SQL多媒体和应用程序包.第5部分:静态图像 |
Information technology - Database languages - SQL multimedia and application packages - Part 5: Still image |
| ANSI/sort/ISO/IEC 13422-1994 |
信息技术.在扇区伺服磁道的10M字节容量的90mm盒式软盘上进行数据交换 |
Information Technology - Data Interchange on 90 mm Flexible Disk Cartridges on 10 Mbyte Capacity Using Sector Servo Tracking - ISO Type 304 |
| ANSI/sort/ISO/IEC 13714-1995 |
信息技术.文件处理和有关通信.基于电话服务的用户接口.语音传输应用 |
Information Technology - Document Processing and Related Communication - User Interface to Telephone-Based Services - Voice Messaging Applications |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com