标准号 |
中文名称 |
英文名称 |
ANSI/ASTM E 105-1997 |
材料概率取样的实施规程 |
Practice for Probability Sampling of Materials |
ANSI/ASTM E 1050-1997 |
管子、双扩音器和数字频率分析系统用传声材料的阻抗和吸收的试验方法 |
Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System |
ANSI/ASTM E 1057-1993 |
建筑和建筑系统投资可调节内部回报比率和内部回报比率的测量实施规程 |
Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems (04.11) |
ANSI/ASTM E 1066-1996 |
氨比色泄漏检验的试验方法 |
Test Method for Ammonia Colorimetric Leak Testing |
ANSI/ASTM E 1067-2001 |
纤维玻璃增强塑料树脂灌/容器声音散发检验操作规程 |
Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (Frp) Tanks/Vessels |
ANSI/ASTM E 1074-1993 |
建筑物和建筑系统投资收益的测算实施规程 |
Practice for Measuring Net Benefits for Investments in Buildings and Building Systems (04.11) |
ANSI/ASTM E 1079-1996 |
透射密度计的校准实施规程 |
Practice for Calibration of Transmission Densitometers |
ANSI/ASTM E 1091-1996 |
防护板用非金属蜂窝芯子规范 |
Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels (04.11) |
ANSI/ASTM E 11-2001 |
试验用途的线织筛规范 |
Specification for Wire-Cloth Sieves for Testing Purposes |
ANSI/ASTM E 1105-1996 |
通过均一或循环静态空气压差测定门、窗帘墙和安装的外窗水渗透现场测量的试验方法 |
Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Curtain Walls, and Doors by Uniform or Cyclic Static Air Pressure Difference (04.11) |
ANSI/ASTM E 1111-1997 |
测量顶棚系统地段间减弱的试验方法 |
Test Method for Measuring the Interzone Attenuation of Ceiling Systems |
ANSI/ASTM E 1114-1996 |
测定铱192工业射线源焦点尺寸的试验方法 |
Test Method for Determining the Focal Size of Iridium-192 Industrial Radiographic Sources |
ANSI/ASTM E 1118-1996 |
强化热固树脂管(RTRP)的声辐射检验的实施规程 |
Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (Rtrp) |
ANSI/ASTM E 1121-1993 |
建筑物和建筑系统投资回收率的测算实施规程 |
Practice for Measuring Payback for Investments in Buildings and Building Systems (04.11) |
ANSI/ASTM E 1124-1997 |
用双表面法现场测量声功率级的试验方法 |
Test Method for Field Measurement of Sound Power Level by the Two-Surface Method |
ANSI/ASTM E 1130-2002 |
使用声音清晰度指数在敞开式办公室内对谈话保密性进行客观量度的试验方法 |
Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index |
ANSI/ASTM E 1135-1996 |
荧光穿透性亮度比较的试验方法 |
Test Method for Comparing The Brightness of Fluorescent Penetrants |
ANSI/ASTM E 1139-1997 |
金属压力面产生的声辐射的连续监测实施规范 |
Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
ANSI/ASTM E 114-1996 |
用接触法做超声脉冲回波纵波检验的实施规程 |
Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method |
ANSI/ASTM E 1155-1996 |
用F-值系统测定地板平坦度和水平度的试验方法 |
Test Method for Determining Floor Flatness and Levelness Using the F-Number System (04.11) |
ANSI/ASTM E 1161-1996 |
半导体和电子件的放射性检查的试验方法 |
Test Method for Radiologic Examination of Semiconductors and Electronic Components |
ANSI/ASTM E 1165-1996 |
用针孔成像法测量工业X射线管焦点的试验方法 |
Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ANSI/ASTM E 1169-1997 |
耐久性试验的实施指南 |
Guide for Conducting Ruggedness Tests |
ANSI/ASTM E 1171-2002 |
在循环温度和湿度环境下光伏模块的试验方法 |
Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
ANSI/ASTM E 1179-1997 |
敞开式办公室件和系统测试用声源规范 |
Specification for Sound Sources Used for Testing Open Office Components and Systems |
ANSI/ASTM E 1186-1987 |
建筑物外层漏气的现场检测实施规程 |
Practice for Air Leakage Site Detection in Building Envelopes (04.11) |
ANSI/ASTM E 1187-1997 |
与实验室认可有关的术语 |
Terminology Relating to Laboratory Accreditation |
ANSI/ASTM E 1204-2001 |
食品加工用γ辐射装置的剂量测定的实施规程 |
Dosimetry in Gamma Irradiation Facilities for Food Processing, Practice for (12.02) |
ANSI/ASTM E 1205-2001 |
高铈-三价铈硫酸剂量测定系统的使用的实施规程 |
Use of a Ceric-Cerous Sulfate Dosimetry System, Practice for (12.02) |
ANSI/ASTM E 1211-1997 |
使用表面安装的声辐射探测器作泄漏探测和定位的实施规范 |
Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ANSI/ASTM E 122-2000 |
为估算一批产品或者一次加工过程的质量而选择样品尺寸的实施规程 |
Practice for Choice of Sample Size to Estimate a Measure of Quality for a Lot or Process |
ANSI/ASTM E 1222-1997 |
管子护套装置介入损耗的实验室测量的试验方法 |
Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
ANSI/ASTM E 1224-1996 |
实验室认可能力类别分区指南 |
Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes |
ANSI/ASTM E 125-1997 |
铁铸件的磁粉检验用参考射线照片 |
Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
ANSI/ASTM E 1254-1996 |
X射线照片和未曝光工业X射线照相胶片的储存指南 |
Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
ANSI/ASTM E 1255-1996 |
射线检查实施规程 |
Practice for Radioscopy |
ANSI/ASTM E 1258-1988 |
风扇增压装置气流校正的试验方法 |
Test Method for Airflow Calibration of Fan Pressurization Devices (04.11) |
ANSI/ASTM E 1265-1997 |
气动排气消音器介入损耗测量的试验方法 |
Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers |
ANSI/ASTM E 127-1999 |
超声波标准铝合金块的制造及检验的实施规范 |
Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks |
ANSI/ASTM E 1275-2001 |
放射铬箔剂量测定系统使用的实施规程 |
The Use of a Radiochromic Film Dosimetry System, Practice for (12.02) |
ANSI/ASTM E 1276-1997 |
有机玻璃剂量测定系统使用的实施规程 |
Use of Polymethylmethacrylate Dosimetry System, Practice for |
ANSI/ASTM E 1289-1997 |
声传输损耗的基准试样规范 |
Specification for Reference Specimen for Sound Transmission Loss |
ANSI/ASTM E 1301-1996 |
实验室验证试验程序的制定和运行指南 |
Guide for Development and Operation of Laboratory Proficiency Testing Programs |
ANSI/ASTM E 1310-2001 |
辐射铬光学波导管剂量测定系统的使用的实施规程 |
The Use of a Radiochromic Optical Waveguide Dosimetry System, Practice for (12.02) |
ANSI/ASTM E 1316-2002 |
无损检验术语 |
Terminology for Nondestructive Examinations |
ANSI/ASTM E 1320-1996 |
钛铸件用基准X射线照相 |
Reference Radiographs for Titanium Castings |
ANSI/ASTM E 1323-1996 |
实验室测量规程的评估和结果数据的统计分析指南 |
Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ANSI/ASTM E 1324-1996 |
超声检验装置的某些电子特性测定指南 |
Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments |
ANSI/ASTM E 1352-2002 |
模拟装璜家具组装件的抗香烟引燃性的试验方法 |
Test Methods For Cigarette Ignition Resistance Of Mock-Up Upholstered Furniture Assemblies |
ANSI/ASTM E 1353-2002 |
装璜家具部件的抗香烟引燃性的试验方法 |
Test Methods For Cigarette Ignition Resistance Of Components Of Upholstered Furniture |
ANSI/ASTM E 1354-2002 |
使用耗氧量热计测试材料和产品的热和可见烟释放速率的方法 |
Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ANSI/ASTM E 1370-2001 |
工作人员和工作场所保护的空气取样战略指南 |
Guide for Air Sampling Strategies for Worker and Workplace Protection |
ANSI/ASTM E 1374-1997 |
开放式办公室声学及其适用的ASTM标准的指南 |
Guide for Open Office Acoustics and Applicable ASTM Standards |
ANSI/ASTM E 1381-1996 |
临床实验室仪器与计算机之间传递信息的低层协议规范 |
Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems |
ANSI/ASTM E 1390-1996 |
用于观察工业射线照相的照明装置的指南 |
Guide for Illuminators Used for Viewing Industrial Radiographs |
ANSI/ASTM E 140-2002 |
金属硬度换算表 |
Hardness Conversion Tables for Metals |
ANSI/ASTM E 1400-1995 |
高剂量辐射量测定校准实验室的特性记述和性能规程 |
Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory, Practice for (12.02) |
ANSI/ASTM E 141-1997 |
根据概率取样结果所得数据的验收实施规程 |
Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
ANSI/ASTM E 1411-2001 |
射线检验系统质量操作规程 |
Practice for Qualification of Radioscopic Systems |
ANSI/ASTM E 1416-1996 |
焊件的射线检验的试验方法 |
Test Method for Radioscopic Examination of Weldments |
ANSI/ASTM E 1419-2002 |
用声波发射检验充有气体的无缝压力容器的试验方法 |
Test Method for Examination of Seamless, Gas Filled, Pressure Vessels Using Acoustic Emission |
ANSI/ASTM E 142-1996 |
射线照相检验的质量控制方法 |
Method for Controlling Quality of Radiographic Testing |
ANSI/ASTM E 1433-1997 |
环境声学标准的选择的指南 |
Guide for Selection of Standards on Environmental Acoustics |
ANSI/ASTM E 1453-1996 |
包含模拟或数字X射线检验数据的介质的存储指南 |
Guide for Storage of Media that Contains Analog or Digital Radioscopic Data |
ANSI/ASTM E 1474-2001 |
使用小型耗氧量热计测定装饰家具和垫子的组合件或组合材料的热释放速率的试验方法 |
Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
ANSI/ASTM E 1475-1997 |
数字放射性测试数据的计算机化传输用数据组指南 |
Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data |
ANSI/ASTM E 1476-1997 |
金属识别、定级和分类指南 |
Guide for Metals Identification, Grade Verification, and Sorting |
ANSI/ASTM E 1481-1993 |
建筑物用护栏装置和围栏术语 |
Terminology of Railing Systems and Rails for Buildings (04.11) |
ANSI/ASTM E 1488-1997 |
研制和运用ASTM试验方法用的统计程序的试验方法 |
Test Method for Statistical Procedures to Use in Developing and Applying Test Methods |
ANSI/ASTM E 1495-1997 |
复合材料、叠层板材和粘接件的声学超声波评定指南 |
Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
ANSI/ASTM E 1496-1997 |
中子射线照相尺寸测量的试验方法 |
Test Method for Neutron Radiographic Dimensional Measurements |
ANSI/ASTM E 1503-1997 |
使用数字统计分析系统测量室外声音的测试方法 |
Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System |
ANSI/ASTM E 1537-2002 |
装覆盖饰物的实尺家具燃烧试验的试验方法 |
Test Method for Fire Testing of Real Scale Upholstered Furniture Items |
ANSI/ASTM E 1539-2001 |
辐射灵敏指示器的使用指南 |
Guide for the Use of Radiation-Sensitive Indicators |
ANSI/ASTM E 154-1988 |
用于与地面接触的混凝土条板下或墙上或作为地板盖的水蒸气滞留的的试验方法 |
Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover (04.11) |
ANSI/ASTM E 1543-1996 |
热成像系统的噪声等效温差的测试方法 |
Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems |
ANSI/ASTM E 155-1996 |
铝和镁铸件检验用标准参考射线照相 |
Reference Radiographs for Examination of Aluminum and Magnesium Castings |
ANSI/ASTM E 1555-1993 |
用于夹层板修补的结构膏胶粘剂规范 |
Specification for Structural Paste Adhesive for Sandwich Panel Repair (04.11) |
ANSI/ASTM E 1556-1993 |
合成革、蜂窝状夹层板修补用环氧树脂系统规范 |
Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair (04.11) |
ANSI/ASTM E 1571-1996 |
铁磁钢丝绳电磁检验实施规程 |
Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
ANSI/ASTM E 1573-1997 |
用A级加权和1/3倍频带声压级评定开放办公室掩蔽声的测试方法 |
Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels |
ANSI/ASTM E 1579-1996 |
高度计算机化实验室操作中数据完整性保证的指南 |
Guide for Ensuring Data Integrity in Highly Computerized Laboratory Operations |
ANSI/ASTM E 1580-1996 |
认可实验室监督的指南 |
Guide for Surveillance of Accredited Laboratories |
ANSI/ASTM E 1605-2002 |
减小建筑物和有关结构中铅基涂料危害的术语 |
Terminology Relating to Abatement of Hazards from Lead-Based Paint in Building and Related Structures (04.11) |
ANSI/ASTM E 161-1997 |
精密电铸筛规范 |
Specification for Precision Electroformed Sieves |
ANSI/ASTM E 1617-1997 |
报告粒径特性数据的实施规程 |
Practice for Reporting Particle Size Characterization Data |
ANSI/ASTM E 1620-1997 |
液体微粒及雾化术语 |
Terminology Relating to Liquid Particles and Atomization |
ANSI/ASTM E 1623-2002 |
使用中型量热计(ICAL)测定材料、产品和系统的着火和热参数的试验方法 |
Test Method For Determination Of Fire And Thermal Parameters Of Materials, Products And Systems Using An Intermediate Scale Calorimeter (ICAL) |
ANSI/ASTM E 1626-1997 |
ASTM文件中列入政府采购要求的指南 |
Guide for Including Government Procurement Requirements In ASTM Documents |
ANSI/ASTM E 1629-1996 |
专用涡流探针电阻测定的实施规程 |
Practice for Determining the Impedance of Absolute Eddy Current Probes |
ANSI/ASTM E 1631-1997 |
电子束剂量计测量和剂量计校准用量热测定系统的操作规程 |
Use of Calorimetric Dosimetry Systems for Electron Beam Dosimeter Measurements and Dosimeter Calibrations, Practice for |
ANSI/ASTM E 1633-2002 |
基于计算机的患者病历用编码标准规范 |
Specification for Coded Values Used in Computer-Based Patient Record |
ANSI/ASTM E 1639-2001 |
临床试验室信息管理系统基本要求指南 |
Functional Requirements of Clinical Laboratory Information Management Systems, Guide for (14.01) |
ANSI/ASTM E 164-1997 |
焊接件超声接触检验的实施规范 |
Practice for Ultrasonic Contact Examination of Weldments |
ANSI/ASTM E 1648-1996 |
铝熔焊检验的参考射线照相 |
Reference Radiographs for Examination of Aluminum Fusion Welds |
ANSI/ASTM E 165-2002 |
液体渗透检验的试验方法 |
Test Method for Liquid Penetrant Examination |
ANSI/ASTM E 1650-2002 |
乙酸纤维素剂量测定系统的使用规程 |
Use of a Cellulose Acetate Dosimetry System, Practice for |
ANSI/ASTM E 1660-1995 |
办公室工作用办公设备适用性的分类 |
Classification for Serviceability of an Office Facility for Support for Office Work (04.11) |
ANSI/ASTM E 1661-1995 |
办公设备对于会议和聚会效果的适用性分类 |
Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness (04.11) |
ANSI/ASTM E 1662-1995 |
办公设备对于视听环境的适用性分类 |
Classification for Serviceability of an Office Facility for Sound and Visual Environment (04.11) |
ANSI/ASTM E 1663-2001 |
办公设备对于典型办公室信息技术的适用性分类 |
Classification for Serviceability of an Office Facility for Typical Office Information Technology (04.11) |
ANSI/ASTM E 1664-1995 |
办公设备对于设备保护的适用性分类 |
Classification for Serviceability of an Office Facility for Facility Protection (04.11) |
ANSI/ASTM E 1665-1995 |
办公设备对于设备保护的适用性分类 |
Classification for Serviceability of an Office Facility for Facility Protection (04.11) |
ANSI/ASTM E 1666-1995 |
办公设备对于正常时间和条件以外的工作的适用性分类 |
Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions (04.11) |
ANSI/ASTM E 1668-1995 |
办公设备对于吸引和留住职员的舒适性的适用性分类 |
Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff (04.11) |
ANSI/ASTM E 1669-1995 |
办公设备对于寻找位置、通路和道路的适用性的分类 |
Classification for Serviceability of an Office Facility for Location, Access, and Wayfinding (04.11) |
ANSI/ASTM E 1670-1995 |
办公设备对于操作和维护管理用建筑物性能的适用性分类 |
Classification for Serviceability of an Office Facility on Performance of Buildings for Management of Operations and Maintenance (04.11) |
ANSI/ASTM E 1671-1995 |
办公设备对于清洁度的适用性分类 |
Classification for Serviceability of an Office Facility for Cleanliness (04.11) |
ANSI/ASTM E 1672-1995 |
计算机断层系统选择指南 |
Guide to Computed Tomography (Ct) System Selection |
ANSI/ASTM E 1686-1997 |
环境噪声测量及准则选择的指南 |
Guide for Selection of Environmental Noise Measurements and Criteria |
ANSI/ASTM E 1692-1995 |
办公设备对办公人员变动的适用性分类 |
Classification for Serviceability of an Office Facility for Change and Churn by Occupants (04.11) |
ANSI/ASTM E 1694-1995 |
办公设备对特殊设备和技术的适用性分类 |
Classification for Serviceability of an Office Facility for Special Facilities and Technologies (04.11) |
ANSI/ASTM E 1695-1996 |
计算机断层摄影(CT)系统性能测量的试验方法 |
Test Method for Measurement of Computed Tomography (Ct) System Performance |
ANSI/ASTM E 1704-1997 |
规定隔音室声学性能的指南 |
Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures |
ANSI/ASTM E 1712-2002 |
表述临床实验室试验和被分析物的规范 |
Representing Clinical Laboratory Test and Analyte Names, Specification for (14.01) |
ANSI/ASTM E 1715-2001 |
以计算机为基础的专利记录系统中转化,撤消,接收,注册的目标模式操作规程 |
Practice for an Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems |
ANSI/ASTM E 1728-1999 |
原子能谱测定法测定铅含量时用擦揩取样法现场收集沉积灰尘样品的实施规程 |
Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques (04.11) |
ANSI/ASTM E 1735-1996 |
曝光于4至25Mv的X射线放射的工业放射照相胶片的相对图像质量的测定方法 |
Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 Mv |
ANSI/ASTM E 1736-1996 |
纤维绕制压力容器的超声波评定用实施规程 |
Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
ANSI/ASTM E 1738-1996 |
由认可团体编制认可实验室名录的指南 |
Guide for Development of a Directory of Accredited Laboratories by an Accrediting Body |