标准号 |
中文名称 |
英文名称 |
ANSI/ASTM F 2143-2001 |
冷藏快餐餐具架及工作台性能试验方法 |
Test Method for Performance of Refrigerated Buffet and Preparation Tables |
ANSI/ASTM F 2144-2001 |
开口桶炸锅的性能试验方法 |
Test Method for Performance of Large Open Vat Fryers |
ANSI/ASTM F 2145-2001 |
外直径可控聚酰胺11管及管道系统用聚酰胺11(Pa11)机械配件的规范(60-01-02) |
Specification for Polyamide11 (Pa11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide11 Pipe and Tubing (60-01-02) |
ANSI/ASTM F 2153-2002 |
背负能力测量标准 |
Standard for the Measurement of Backpack Capacity |
ANSI/ASTM F 2154-2001 |
吸音板、纤维玻璃和表面平整的多孔纤维玻璃布规范 |
Specification for Sound Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
ANSI/ASTM F 2158-2001 |
住宅中央空调机(Central-Vacuum Tube)及配件规范 |
Specification for Residential Central-Vacuum Tube and Fittings |
ANSI/ASTM F 2159-2002 |
SDR9 交联聚乙烯(PEX)管道的使用铜波形环的塑料插接件规范 |
Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing |
ANSI/ASTM F 2164-2002 |
采用液压法对聚乙烯压力管道系统进行场漏试验的操作规程 |
Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure |
ANSI/ASTM F 2165-2002 |
预绝缘软管规范 |
Specification for Flexible Pre-insulated Piping |
ANSI/ASTM F 311-1997 |
用膜过滤器处理粒状杂质分析用含水液体样品的实施规程 |
Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
ANSI/ASTM F 312-1997 |
膜滤器上航空流体中颗粒微观大小的测定及计数方法 |
Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters |
ANSI/ASTM F 381-2001 |
蹦床的部件、安装和使用的消费者安全规范 |
Consumer Safety Specification for Components, Assembly, and Use of a Trampoline |
ANSI/ASTM F 395-1999 |
与真空吸尘器相关的术语 |
Terminology Relating to Vacuum Cleaners |
ANSI/ASTM F 405-1996 |
聚乙烯(PE)波纹软管及管配件规范 |
Specification for Corrugated Polyethylene (PE) Tubing and Fittings |
ANSI/ASTM F 412-2001 |
塑料管道系统的相关术语 |
Terminology Relating to Plastic Piping Systems |
ANSI/ASTM F 420-1999 |
真空吸尘器可伸入家具底部深度的测试方法 |
Test Method for Access Depth under Furniture of Vacuum Cleaners |
ANSI/ASTM F 423-1996 |
聚四氟乙烯(PTFE)塑料衬里的黑色金属管、配件和法兰规范 |
Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges |
ANSI/ASTM F 429-2001 |
足球(橄榄球)运动用防护头盔减震性能的试验方法 |
Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football |
ANSI/ASTM F 430-1996 |
真空吸尘器过滤包用纸的试验方法 |
Test Methods for Paper Used for Vacuum Cleaner Filter Bags |
ANSI/ASTM F 437-1996 |
有螺纹的氯化聚氯乙烯塑料管配件规范(80号表) |
Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
ANSI/ASTM F 438-2001 |
套节型氯化聚氯乙烯(CPVC)塑料管配件规范(40号表) |
Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
ANSI/ASTM F 439-2001 |
套节型氯化聚氯乙烯(CPVC)塑料管配件规范(80号表) |
Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
ANSI/ASTM F 441-1996 |
氯化聚氯乙烯(CPVC)塑料管规范(40号及80号表) |
Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
ANSI/ASTM F 442-1996 |
氯化聚氯乙烯(CPVC)塑料管规范(SDR-PR) |
Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) |
ANSI/ASTM F 449-1996 |
农业排水或地下水位控制用热塑塑料波纹管地下安装实施规程 |
Practice for Subsurface Installation of Corrugated Thermoplastic Tubing for Agricultural Drainage or Water Table Control |
ANSI/ASTM F 450-2001 |
真空吸尘器软管的耐热性及可靠性的试验方法(塑料线增强) |
Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (Plastic Wire Reinforced) |
ANSI/ASTM F 481-1996 |
化肥池沥滤场用热塑塑料管和波纹软管的安装实施规程 |
Practice for Installation of Thermoplastic Pipe and Corrugated Tubing in Septic Tank Leach Fields |
ANSI/ASTM F 491-1996 |
聚偏氟乙烯塑料衬里的黑色金属管及配件规范 |
Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings |
ANSI/ASTM F 492-1996 |
丙烯及聚丙烯塑料衬里的黑色金属管及配件规范 |
Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings |
ANSI/ASTM F 493-1996 |
氯化的聚氯乙烯(CPVC)塑料管及配件用可溶解粘结剂规范 |
Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
ANSI/ASTM F 539-2002 |
组装运动鞋的操作规范 |
Practice for Fitting Athletic Footwear |
ANSI/ASTM F 546-1996 |
全氟化乙烯-丙烯共聚物塑料衬里的黑色金属管及管件规范 |
Specification for Perfluoro(Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings |
ANSI/ASTM F 555-2001 |
立式真空吸尘器的电动机寿命评定试验方法 |
Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
ANSI/ASTM F 595-2001 |
真空吸尘器软管的耐用性及可靠性试验方法(全塑软管) |
Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (All-Plastic Hose) |
ANSI/ASTM F 599-1996 |
聚偏二氯乙烯(PVDC)塑料衬里的黑色金属管及配件规范 |
Specification for Poly (Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings |
ANSI/ASTM F 609-1997 |
使用平拉滑动器(HPS)的试验方法 |
Test Method for Using a Horizontal Pull Slipmeter (HPS) |
ANSI/ASTM F 628-2001 |
具有泡沫填充料的ABS40号塑料排水污水和通风管道规范 |
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core |
ANSI/ASTM F 649-2001 |
用比较程序进行气载微粒计数器二次校正的实施规程 |
Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures |
ANSI/ASTM F 655-1996 |
真空吸尘器试验用试验地毯和缓冲垫规范 |
Specification for Test Carpets and Pads for Vacuum Cleaner Testing |
ANSI/ASTM F 656-1996 |
聚氯乙烯塑料管和配件的溶剂胶结接口用打底剂规范 |
Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
ANSI/ASTM F 667-1997 |
大直径波纹聚乙烯管及配件规范 |
Specification for Large Diameter Corrugated Polyethylene Tubing and Fittings |
ANSI/ASTM F 670-1997 |
5和10加仑(20和40升)的润滑油配料容器规范 |
Specification for Tanks, 5- and 10-Gal (20- and 40-L) Lube Oil Dispensing |
ANSI/ASTM F 683-2002 |
管道和机械热绝缘的选择和应用实施规程 |
Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
ANSI/ASTM F 690-1996 |
热塑压力管道灌溉系统的地下装置实施规程 |
Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems |
ANSI/ASTM F 695-1997 |
测量鞋底、鞋后跟或有关材料的抗滑性所得试验数据的评定的实施规程 |
Practice for Evaluation of Test Data Obtained for Measurement of Slip Resistance of Footwear, Sole, Heel, or Related Materials |
ANSI/ASTM F 704-1997 |
管道系统法兰接头用螺栓长度的选择的实施规程 |
Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
ANSI/ASTM F 708-1997 |
硬质管道支架的设计与安装实施规程 |
Practice for Design and Installation of Rigid Pipe Hangers |
ANSI/ASTM F 714-2001 |
依据外径的聚乙烯(PE)塑料管(SDR-PR)规范 |
Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter |
ANSI/ASTM F 778-2001 |
过滤介质耐气流试验方法 |
Methods for Gas Flow Resistance Testing of Filtration Media |
ANSI/ASTM F 781-1996 |
全氟(烷氧基烷径)共聚物(PFA)塑料衬里黑色金属管及配件规范 |
Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings |
ANSI/ASTM F 782-1997 |
船用家具的门规范 |
Specification for Doors, Furniture, Marine |
ANSI/ASTM F 789-1996 |
PS-46型和PS-115型聚氯乙烯塑料自流污水管及配件规范 |
Specification for Type PS-46 and Type PS 115 Poly (Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings |
ANSI/ASTM F 794-2001 |
内直径可控的聚氯乙烯结构重力下水管及配件规范 |
Specification for Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
ANSI/ASTM F 802-1997 |
根据鞋靴磨擦力选定某种人行道的表面指南 |
Guide for the Selection of Certain Walkway Surfaces when Considering Footwear Traction |
ANSI/ASTM F 809/F 809M-1995 |
大直径聚丁烯塑料管规范 |
Specification for Large Diameter Polybutylene (PB) Plastic Pipe |
ANSI/ASTM F 810-2001 |
排水和污水处理吸收场用光壁聚乙烯(PE)管规范 |
Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
ANSI/ASTM F 821-1997 |
船舶内部钢门及门框规范 |
Specification for Doors and Frames, Steel, Interior, Marine |
ANSI/ASTM F 845-1996 |
聚丁烯(PB)管用塑料插入配件规范 |
Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing |
ANSI/ASTM F 885-1997 |
美国标准直管螺纹1/4至2英寸青铜球型阀的阀壳尺寸规范 |
Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2 |
ANSI/ASTM F 888-1999 |
测量真空吸尘器的主要灰尘收集器最大功能容积的试验方法 |
Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner |
ANSI/ASTM F 905-1996 |
聚乙烯鞍形熔融接头的合格鉴定的实施规程 |
Practice for Qualification of Polyethylene Saddle Fusion Joints |
ANSI/ASTM F 913-2001 |
连接塑料管用热塑弹性密封件(垫圈)规范 |
Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ANSI/ASTM F 922-2001 |
家用电动喷头的电动机寿命评估的测试方法 |
Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle |
ANSI/ASTM F 936-1997 |
巴拿马锚用铸钢轮挡规范 |
Specification for Chocks, Panama, Mooring Cast Steel |
ANSI/ASTM F 937-1997 |
船锚用铸钢轮挡规范 |
Specification for Chocks, Ship Mooring, Cast Steel |
ANSI/ASTM F 955-1996 |
评定通过接触熔融物质的防护服装材料的传热性的试验方法 |
Test Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances |
ANSI/ASTM F 956-1997 |
铸制声音信号铃规范 |
Specification for Bell, Cast, Sound Signaling |
ANSI/ASTM F 957-1997 |
声音信号钟规范 |
Specification for Gong, Sound Signaling |
ANSI/ASTM F 986-1997 |
吸滤器外壳规范 |
Specification for Suction Strainer Boxes |
ANSI/ASTM F 991M-1997 |
泄水孔塞/放泄塞和轴节配件的规范(米制) |
Specification for Docking/Drain Plug and Boss Assemblies (Metric) |
ANSI/ASTM F 992-1997 |
阀门标识牌规范 |
Specification for Valve Label Plates |
ANSI/ASTM F 993-1997 |
阀门锁紧装置规范 |
Specification for Valve Locking Devices |
ANSI/ASTM F 994-1997 |
向船外排水船身渗透连接件的设计与安装规范 |
Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
ANSI/ASTM F1003-2002 |
摩托救生艇探照灯规范 |
(Specification for Searchlights on Motor Lifeboats ) |
ANSI/ASTM F1014-2002 |
船上用闪光灯规范 |
(Specification for Flashlights on Vessels ) |
ANSI/ASTM F1015-2003 |
人造草皮运动场表面相对耐磨性的试验方法 |
(Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces ) |
ANSI/ASTM F1045-2004 |
冰球运动员防护帽的性能规范 |
|
ANSI/ASTM F1047-2004 |
可倾煎、炖用锅规范 |
|
ANSI/ASTM F1056-2004 |
套管熔融连接聚乙烯管和配件用套管熔融工具规范 |
|
ANSI/ASTM F1057-2005 |
利用热循环技术评估压塑聚乙烯(PVC)管道质量的实施规程 |
|
ANSI/ASTM F1085-2004 |
床垫和包布床弹簧铺位规范 |
|
ANSI/ASTM F1092-2004 |
挤拔玻璃纤维增强塑料制露天防风暴和方型防护扶手规范 |
|
ANSI/ASTM F1162-2002 |
撑杆跳着陆坑规范 |
(Specification for Pole Vault Landing Pits ) |
ANSI/ASTM F1217-2003 |
蒸煮锅规范 |
(Specification for Cooker, Steam ) |
ANSI/ASTM F1275-2003 |
筛子性能试验方法 |
(Test Methods for the Performance of Griddles ) |
ANSI/ASTM F1282-2002 |
交联聚乙烯/铝/交联聚乙烯合成压力管规范 |
(Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe ) |
ANSI/ASTM F1282-2005 |
聚乙烯/铝/聚乙烯(PE-AL-PE)合成压力管规范 |
|
ANSI/ASTM F1292-2004 |
游乐场器材下面和周围表面系统的减震性规范 |
|
ANSI/ASTM F1335-2004 |
高温设备用压力标定复合管规范 |
|
ANSI/ASTM F1336-2002 |
装密封垫的聚氯乙烯(PVC)下水道管件规范 |
(Specification for Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings ) |
ANSI/ASTM F1352-2003 |
固定刃有粗大尖形铁箭头的箭矢的性能和安全标准指南 |
(Guide for Fixed Blade Broadhead Performance and Safety Standards ) |
ANSI/ASTM F1363-2003 |
降低弓箭张拉过大造成伤害风险的导则 |
(Guide for Reduction of Risk of Injury for Archery Overdraws ) |
ANSI/ASTM F1430-2003 |
带附加载荷调节装置的航空人员隔音装置声发射检验的试验方法 |
(Test Method for Acoustic Emission Testing of Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments ) |
ANSI/ASTM F1435-2004 |
弓箭平衡点定位规范 |
|
ANSI/ASTM F1436-2003 |
射箭弓弦的中心被复直径尺寸指南 |
(Guide for Center Serving Diameter Dimensions for Archery Bow Strings ) |
ANSI/ASTM F1446-2004 |
防护头盔性能特征评定用设备和程序的试验方法 |
|
ANSI/ASTM F1447-2003 |
自行车运动中使用的防护帽规范 |
(Specification for Protective Headgear Used in Bicycling ) |
ANSI/ASTM F1484-2004 |
蒸锅性能的试验方法 |
|
ANSI/ASTM F1488-2003 |
共挤压复合管的规范 |
(Specification for Coextruded Composite Pipe ) |
ANSI/ASTM F1504-2002 |
现有污水管和下水管修复用波纹聚氯乙烯管的规范 |
(Specification for Folded Poly (Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation ) |
ANSI/ASTM F1511-2003 |
舰船泵设施的机械密封件规范 |
(Specification for Mechanical Seals for Shipboard Pump Applications ) |
ANSI/ASTM F1511-2004 |
船泵设施用机械密封件规范 |
|
ANSI/ASTM F1511-2005 |
船泵设施用机械密封件规范 |
|
ANSI/ASTM F1521-2003 |
炊用炉性能的试验方法 |
(Test Methods for Performance of Range Tops ) |
ANSI/ASTM F1543-2003 |
围墙表面冲击衰减特性规范 |
(Specification for Shock Attenuation Properties of Fencing Surfaces ) |
ANSI/ASTM F1544-2004 |
测定弓箭额定速率的规范 |
|
ANSI/ASTM F1551-2003 |
合成草地使用表面和材料综合特性的试验方法 |
(Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials ) |
ANSI/ASTM F1577-2002 |
摆动门卡锁的试验方法 |
(Test Methods for Detention Locks for Swinging Doors ) |
ANSI/ASTM F1632-2002 |
高尔夫场地铺设草坪和运动场根层的粒度分析和砂形分级的试验方法 |
(Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes ) |
ANSI/ASTM F1643-2002 |
锁销式滑动门锁装置系统的试验方法 |
(Test Methods for Detention Sliding Door Locking Device Assembly ) |
ANSI/ASTM F1647-2003 |
小型高尔夫球场用绿呢和运动草坪根层混合物的有机物质含量的试验方法 |
(Test Method for Organic Matter Content of Putting Green and Sport Turf Root Zone Mixes ) |
ANSI/ASTM F1673-2004 |
聚偏氟乙烯(PVDF)腐蚀性废物排放系统的规范 |
|
ANSI/ASTM F1695-2003 |
热底式烧烤器具性能的试验方法 |
(Test Method for the Performance of Underfired Broilers ) |
ANSI/ASTM F1697-2002 |
聚氯乙烯 (PVC) 排污管道和管件规范 |
(Specification for Poly (Vinyl Chloride) (PVC) Drain, Waste and Pipe and Fittings ) |
ANSI/ASTM F1698-2002 |
现存排污管和管道修复用聚氯乙烯管线衬里和水泥薄浆的安装实施规程 |
(Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits ) |
ANSI/ASTM F1702-2002 |
利用轻量级便携式仪器测量立体声播放系统震动衰减特性的试验方法 |
(Test Method for Measuring Shock-attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus ) |
ANSI/ASTM F1720-2004 |
使用加热模型测量睡袋保温性的试验方法 |
|
ANSI/ASTM F1734-2003 |
为避免聚乙烯燃气管长期受损用挤压工具、管和挤压工序组合的鉴定实施规程 |
(Practice for Qualification of a Combination of Squeeze Tool, Pipe and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe ) |
ANSI/ASTM F1735-2002 |
修复现有的人可进入的污水管道用PVC衬里的聚氯乙烯(PVC)异型带材规范 |
(Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits ) |
ANSI/ASTM F1741-2005 |
现有排水管和管道修复用机械螺旋缠绕聚氯乙烯(PVC)内衬管安装的实施规程 |
|