标准号 |
中文名称 |
英文名称 |
| ANSI/ASTM D 957-1995 |
工业用塑料压制模表面温度的测定规程 |
Practice for Determining Mold Surface Temperature of Commercial Molds for Plastics (08.01) |
| ANSI/ASTM D 958-1988 |
塑料试样用标准ASTM模的温度测定规程 |
Practice for Determining Temperatures of Standard ASTM Molds for Test Specimens of Plastics (08.01) |
| ANSI/ASTM D 96-1988 |
原油中水和沉积物的(05.01)试验方法 |
Water and Sediment in Crude Oils, Method of Test for (05.01) |
| ANSI/ASTM D 97-1987 |
石油产品倾点的测试方法 |
Pour Point, Method of Test for (05.01, 10.03) |
| ANSI/ASTM D 971-1991 |
用圆环法对油与水的界面张力的试验方法 |
Test Method for Interfacial Tension of Oil Against Water by the Ring Method (05.01, 10.03) |
| ANSI/ASTM D 972-1997 |
润滑脂及油的蒸发损失试验方法 |
Test Method for Evaporation Loss of Lubricating Greases and Oils (05.01) |
| ANSI/ASTM D 974-2001 |
用颜色指示剂滴定法测定中和值的试验方法 |
Neutralization Number by Color-Indicator Titration, Method of Test for (05.01) |
| ANSI/ASTM D 975-1994 |
柴油机燃料油规范 |
Specification for Diesel Fuel Oils (05.01) |
| ANSI/ASTM D 976-1991 |
馏分燃料的十六烷值指数的计算方法 |
Methods for Calculated Cetane Index of Distillate (05.01) |
| ANSI/ASTM D1067-2002 |
水的酸性和碱性试验方法 |
(Test Methods for Acidity or Alkalinity of Water ) |
| ANSI/ASTM D1068-2003 |
水中铁的试验方法 |
(Test Methods for Iron in Water ) |
| ANSI/ASTM D1093-2004 |
蒸馏残余物或烃液的酸性试验方法 |
|
| ANSI/ASTM D1129a-2003 |
水相关术语 |
(Terminology Relating to Water ) |
| ANSI/ASTM D1129a-2004 |
水相关术语 |
|
| ANSI/ASTM D115-2002 |
电绝缘用清漆的试验方法(10.01) |
(Test method for Varnishes Used for Electrical Insulation (10.01) ) |
| ANSI/ASTM D1160-2003 |
石油产品减压蒸馏试验方法 |
(Test Method for Distillation of Petroleum Products at Reduced Pressures (05.01) ) |
| ANSI/ASTM D1179-2004 |
水中氟化物离子的试验方法 |
|
| ANSI/ASTM D1218-2002 |
液态烃折射率和折射色散的试验方法(05.01, 10.03) |
(Refractive Index and Refractive Dispersion of Hydrocarbon Liquids, Method of Test for (05.01, 10.03) ) |
| ANSI/ASTM D1250-2003 |
石油测量表指南 |
(Guide for Petroleum Measurement Tables ) |
| ANSI/ASTM D1264-2003 |
测定润滑脂的水冲洗特性的试验方法 |
(Test Method for Determining the Water Washout Characteristics of Lubricating Greases ) |
| ANSI/ASTM D1265-2005 |
液化石油气(LP)取样的实施规程.人工法 |
|
| ANSI/ASTM D127-2005 |
石油蜡(包括矿脂的)滴落熔点的试验方法 |
|
| ANSI/ASTM D130-2004 |
用铜片生锈试验检查石油产品对铜腐蚀性的试验方法 |
|
| ANSI/ASTM D1319a-2002 |
用荧光指示剂吸收法在液体石油产品中对烃类的试验方法 |
(Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, Test Method for (05.01) ) |
| ANSI/ASTM D1321a-2002 |
石油蜡针入度的试验方法 |
(Needle Penetration of Petroleum Waxes, Method of Test for (05.01, 15.09) ) |
| ANSI/ASTM D1351-2002 |
电线和电缆用热塑性聚乙烯绝缘规范 |
(Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable ) |
| ANSI/ASTM D1352-2002 |
电线和电缆用耐臭氧的丁基橡胶绝缘规范 |
(Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable ) |
| ANSI/ASTM D1401-2002 |
石油和合成流体中水的可分离性的试验方法 |
(Test Method for Water Separability of Petroleum Oils and Synthetic Fluids (05.01) ) |
| ANSI/ASTM D1403-2002 |
用四分之一和二分之一标度的锥度设备测定润滑脂针入度的试验方法(05.01) |
(Test Method for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment (05.01) ) |
| ANSI/ASTM D1405-2002 |
航空燃料消耗的净热量的估算方法(05.01) |
(Method for Estimation of Net Heat of Combustion of Aviation Fuels (05.01) ) |
| ANSI/ASTM D1429-2003 |
水和卤水比重的试验方法 |
(Test Methods for Specific Gravity of Water and Brine ) |
| ANSI/ASTM D1478-2002 |
滚珠轴承润滑脂的低温扭矩的试验方法 |
(Test Method for Low-Temperature Torque of Ball Bearing Greases (05.01) ) |
| ANSI/ASTM D1480-2002 |
用宾厄姆比重计测量粘性材料的密度和相对密度(比重)的试验方法 |
(TEST Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer (05.01) ) |
| ANSI/ASTM D1481-2002 |
用利普金双毛细管比重计测量粘性材料的密度和相对密度(比重)的试验方法 |
(Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (05.01) ) |
| ANSI/ASTM D1500-2002 |
石油产品的ASTM颜色的试验方法 |
(Test Method for ASTM Color of Petroleum Products (05.01) ) |
| ANSI/ASTM D1527-2005 |
丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料管材范.表40和80 |
|
| ANSI/ASTM D1552-2003 |
石油产品中硫的试验方法(高温法) |
(Sulfur in Petroleum Products (High-Temperature Method), Method of Test for (05.01) ) |
| ANSI/ASTM D156-2002 |
石油产品的赛波特比色试验方法(赛波特比色计法) |
(Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) (05.01) ) |
| ANSI/ASTM D1623-2003 |
硬质多孔塑料的抗张性和抗拉粘着性的试验方法 |
(Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics ) |
| ANSI/ASTM D1655-2003 |
航空燃气涡轮发动机燃料的规范 |
(Specification for Aviation Turbine Fuels ) |
| ANSI/ASTM D1657-2002 |
用压力温差比重计测定轻质烃的密度或相对密度的试验方法 |
(Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer ) |
| ANSI/ASTM D1675-2003 |
聚四氟乙烯管的试验方法(10.01) |
(Test Methods for Polytetrafluoroethylene Tubing (10.01) ) |
| ANSI/ASTM D1676-2003 |
膜绝缘磁导线的试验方法(10.01) |
(Methods of Testing Film-Insulated Magnet Wire (10.01) ) |
| ANSI/ASTM D1677-2002 |
取样和测试电绝缘用的未处理云母纸的取样和试验方法 |
(Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation ) |
| ANSI/ASTM D1679-2002 |
75℃运行的电线和电缆用合成橡胶的耐热和耐湿绝缘性规范 |
(Specification for Synthetic Rubber Heat- and Moisture-Resisting Insulation for Wire and Cable, 75 Deg C Operation ) |
| ANSI/ASTM D1687-2002 |
水中铬的测试方法 |
(Test Methods for Chromium in Water ) |
| ANSI/ASTM D1688-2002 |
水中铜的试验方法 |
(Test Methods for Copper in Water ) |
| ANSI/ASTM D1691-2002 |
水中锌的试验方法 |
(Test Methods for Zinc in Water ) |
| ANSI/ASTM D1709-2003 |
用自由落体法测定塑料薄膜抗冲击的试验方法 |
(Test Methods for Impact Resistance of Plastic Film by the Free-falling Dart Method ) |
| ANSI/ASTM D1711-2002 |
电绝缘的术语(10.01) |
(Terminology Relating to Electrical Insulation (10.01) ) |
| ANSI/ASTM D1743-2005 |
测定润滑脂防腐蚀特性的试验方法 |
|
| ANSI/ASTM D1748-2002 |
在湿度室测定金属防腐剂的防锈性的试验方法 |
(Rust Protection by Metal Preservatives in the Humidity Cabinet, Method of Test for (05.01) ) |
| ANSI/ASTM D1785-2003 |
聚氯乙烯(PVC)塑料管规范.表40、80和120 |
(Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 ) |
| ANSI/ASTM D1785a-2004 |
聚氯乙烯塑料管的规范.表40、80、120 |
|
| ANSI/ASTM D1785a-2004 |
聚氯乙烯塑料管的规范.表40、80、120 |
|
| ANSI/ASTM D1796-2004 |
用离心法测定燃油中水和沉积物的试验方法(实验室方法) |
|
| ANSI/ASTM D1835-2003 |
液化石油气规范(05.01) |
(Specification for Liquefied Petroleum (LP) Gases (05.01) ) |
| ANSI/ASTM D1835-2005 |
液化石油气规范 |
|
| ANSI/ASTM D1837a-2002 |
液化石油气挥发性的试验方法 |
(Test Method for Volatility of Liquefied Petroleum (LP) Gases (05.01) ) |
| ANSI/ASTM D1838-2003 |
用液化石油气测定铜带腐蚀的试验方法(05.01,05.05) |
(Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases (05.01, 05.05) ) |
| ANSI/ASTM D1838-2005 |
液化石油(LP)气铜带腐蚀试验方法 |
|
| ANSI/ASTM D1840-2004 |
用紫外线分光光度测定法测定航空涡轮燃料中环烷属烃的试验方法(05.01) |
|
| ANSI/ASTM D1840-2004 |
用紫外线分光光度测定法测定航空涡轮燃料中环烷属烃的试验方法(05.01) |
(Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry, Method of Test for (05.01) ) |
| ANSI/ASTM D1922-2003 |
用摆动法测定塑料薄膜和薄板耐撕裂扩展的试验方法(08.01) |
(Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by the Pendulum Method (08.01) ) |
| ANSI/ASTM D1932-2004 |
柔性电绝缘漆耐热性试验方法 |
|
| ANSI/ASTM D1971-2002 |
火焰原则吸收法或等离子发射光谱测量法测定金属样品的命名和符号规定 |
(Practices for Digestion of Samples for Determination of Metals by Flame Atomic Absorption or Plasma Emission Spectroscopy ) |
| ANSI/ASTM D2007-2003 |
用粘土胶吸收色谱法测定橡胶膨胀剂和加工油以及其他石油衍生油的特性集的试验方法(05.01) |
(Test Method for Characteristic Groups in Rubber Extender and Processing Oils and other Petroleum Derived Oils by the Clay-Gel Absorption Chromatographic Method (05.01) ) |
| ANSI/ASTM D2104-2003 |
聚乙烯(PE)塑料管规范.表40 |
(Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 ) |
| ANSI/ASTM D2109-2002 |
卤化有机溶剂及其混合物中不挥发物质的测试方法 |
(Test Method for Nonvolatile Matter in Halogenated Organic Solvents and their Admixtures ) |
| ANSI/ASTM D2148-2002 |
电绝缘用硅胶带的试验方法(10.01) |
(Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation (10.01) ) |
| ANSI/ASTM D2158-2004 |
液化石油气中残留物的试验方法 |
|
| ANSI/ASTM D2161-2004 |
运动粘度换算成赛波特通用粘度或赛波特重油粘度的方法 |
|
| ANSI/ASTM D217-2002 |
润滑脂的圆锥贯入试验方法 |
(Cone Penetration of Lubricating Grease, Method of Test for (05.01) ) |
| ANSI/ASTM D2219-2002 |
60℃操作时聚氯乙烯电线和电缆绝缘的规范(10.01) |
(Poly(Vinyl Chloride) Insulation for Wire and Cable, 60? Operation, Specification for (10.01) ) |
| ANSI/ASTM D2220-2002 |
操作温度为75℃时聚氯乙烯电线和电缆的绝缘规范(10.01) |
(Poly(Vinyl Chloride) Insulation for Wire and Cable, 75? Operation, Specification for (10.01) ) |
| ANSI/ASTM D2235-2004 |
ABS塑料管道和配件用液状粘固剂规范 |
|
| ANSI/ASTM D2239-2003 |
以受控内径为基准的聚乙烯(PE)塑料管(SIDR-PR)规范 |
(Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter ) |
| ANSI/ASTM D2241-2004 |
聚氯乙烯(PVC)额定压力管规范 |
(Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) ) |
| ANSI/ASTM D2241-2005 |
聚氯乙烯(PVC)额定压力管规范(SDR系列) |
|
| ANSI/ASTM D2241b-2004 |
聚氯乙烯压力管道的规范(SDR系列) |
|
| ANSI/ASTM D2241b-2004 |
聚氯乙烯压力管道的规范(SDR系列) |
|
| ANSI/ASTM D2272-2002 |
用转式储气瓶测定蒸气涡轮机油氧化稳定性的连续性的试验方法(05.01) |
(Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel ) |
| ANSI/ASTM D2274-2004 |
馏出燃料油的氧化稳定性试验(加速法) |
|
| ANSI/ASTM D2274-2004 |
馏出燃料油的氧化稳定性试验(加速法) |
(Oxidation Stability of Distillate Fuel Oil (Accelerated Method), Test for (05.01) ) |
| ANSI/ASTM D2290-2004 |
用分离盘法进行环状或管状和增强塑料表观拉伸强度的试验方法 |
|
| ANSI/ASTM D2305-2002 |
电绝缘用聚合薄膜的试验方法(94-4,2项)(10.01) |
(Test Methods for Polymeric Films Used for Electrical Insulation (94-4, Item 2) (10.01) ) |
| ANSI/ASTM D2308-2002 |
电线和电缆用热塑聚乙烯包装物规范 |
(Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable ) |
| ANSI/ASTM D2321-2004 |
排污水和其它重力流动设备用热塑性管的地下安装实施规范 |
|
| ANSI/ASTM D2321-2005 |
排污水和其它重力流动设备用热塑性管的地下安装实施规程 |
|
| ANSI/ASTM D2330-2002 |
次甲基蓝色活化物质试验方法 |
(Test Method for Methylene Blue Active Substances ) |
| ANSI/ASTM D2386-2003 |
航空燃料的冰点的试验方法(05.01) |
(Freezing Point of Aviation Fuels, Method of Test for (05.01) ) |
| ANSI/ASTM D2386-2005 |
航空燃料冷冻点的试验方法 |
|
| ANSI/ASTM D240-2002 |
用氧弹式量热计测定液态烃燃料的燃烧热值的测试方法(05.01) |
(Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, Method of Test for (05.01) ) |
| ANSI/ASTM D2412-2002 |
测定由平行板负荷的塑料管材外部负荷特征的试验方法 |
(Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading ) |
| ANSI/ASTM D2447-2003 |
以外径尺寸为基准的聚乙烯(PE)塑料管规范.表40和80 |
(Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter ) |
| ANSI/ASTM D2466-2002 |
聚氯乙烯塑料管道配件规范,附表40 |
(Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ) |
| ANSI/ASTM D2466-2005 |
聚氯乙烯(PVC)塑料管道配件规范.表40 |
|
| ANSI/ASTM D2467-2002 |
套管型聚氯乙烯(PVC)塑料管道配件规范,附表80 |
(Specification for Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ) |
| ANSI/ASTM D2467-2004 |
套管型聚氯乙烯(PVC)塑料管道配件规范.表80 |
|
| ANSI/ASTM D2467-2004 |
套管型聚氯乙烯(PVC)塑料管道配件规范.表80 |
|
| ANSI/ASTM D2467-2005 |
套管型聚氯乙烯(PVC)塑料管道配件规范.表80 |
|
| ANSI/ASTM D2500-2002 |
石油浊点的试验方法(05.01) |
(Test Method for Cloud Point of Petroleum Oils (05.01) ) |
| ANSI/ASTM D2500-2005 |
石油产品始凝点的试验方法 |
|
| ANSI/ASTM D2502-2004 |
从粘度测量估算石油分子量的方法 |
|
| ANSI/ASTM D2509-2003 |
测量润滑脂承载能力的试验方法(05.01) |
(Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) (05.01) ) |
| ANSI/ASTM D2513a-2003 |
热塑性燃气压力管及配件规范 |
(Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings ) |
| ANSI/ASTM D2519-2002 |
螺旋形线圈试验法对电绝缘清漆粘结强度的试验方法 |
(Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test ) |
| ANSI/ASTM D2526-2002 |
电线和电缆用耐臭氧硅氧烷橡胶绝缘材料的规范 |
(Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable ) |
| ANSI/ASTM D2532-2004 |
低温静止后飞机燃气涡轮发动机润滑剂的粘度和粘度变化的试验方法 |
|
| ANSI/ASTM D2549-2002 |
用淘析色谱法测定高沸点油的有代表性芳香族和非芳香族馏分的分离试验方法(05.01) |
(Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography (05.01) ) |
| ANSI/ASTM D2564-2002 |
聚氯乙烯塑料管道系统用溶剂粘合剂规范 |
(Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems ) |
| ANSI/ASTM D2564-2004 |
聚氯乙烯塑料管道系统用液状粘固剂规范 |
|
| ANSI/ASTM D2582-2003 |
塑料薄膜和薄板的耐破洞撕裂扩散的试验方法(08.02) |
(Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting (08.02) ) |
| ANSI/ASTM D2609-2002 |
聚乙烯塑料管用的塑料插入管配件规范 |
(Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe ) |
| ANSI/ASTM D2622-2003 |
石油产品中硫的试验方法(X射线光谱法) |
(Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Method) (05.02) ) |
| ANSI/ASTM D2624-2002 |
含静态耗散器添加剂的航空馏出油的电导率的试验方法(05.02) |
(Test Method for Electrical Conductivity of Aviation and Distillate Fuels Containing a Static Dissipator Additive (05.02) ) |
| ANSI/ASTM D2633-2002 |
电线和电缆用热塑性绝缘体和护套的测试方法 |
(Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable ) |
| ANSI/ASTM D2657-2003 |
聚烯烃管和配件的热接合实施规范 |
(Practice for Heat Joining of Polyolefin Pipe and Fittings ) |
| ANSI/ASTM D2661-2002 |
丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通风管和配件的规范.表40 |
(Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ) |
| ANSI/ASTM D2665-2002 |
聚氯乙烯(PVC)塑料排水管、污水管和通风管及配件的规范 |
(Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com