标准号 |
中文名称 |
英文名称 |
| ANSI Z88.2-1992 |
呼吸保护 |
Respiratory Protection |
| ANSI Z89.1-2003 |
工业用头部保护用品 |
(Industrial Head Protection ) |
| ANSI Z9.3-1985 |
排气系统.喷光漆操作的设计与建造和通风的安全要求 |
Exhaust Systems - Spray Finishing Operations - Safety Code for Design, Construction and Ventilation |
| ANSI Z9.4-1985 |
排气系统.喷砂操作的通风和安全作业 |
Exhaust Systems - Abrasive Blasting Operations - Ventilation and Safe Practices |
| ANSI Z97.1-1984 |
建筑物中窗用玻璃的安全性能规范和测试方法 |
Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test |
| ANSI Z97.1-2004 |
建筑物中窗用玻璃材料的安全性能规范和测试方法 |
|
| ANSI/(AAMA) 001-1992 |
数字控制纤维切割机.数据格式.ANSI/EIA 274-D-1980(R1988)的并行标准 |
Numerically Controlled Fabric Cutting Machines - Data Format - A Companion Standard to ANSI/EIA 274-D-1980 (R1988) |
| ANSI/(AAMA) 292-1993 |
数据交换格式.数据格式 |
Pattern Data Interchange - Data Format |
| ANSI/(NFPA) T 2.12.1-1993 |
液力传动.系统和产品.测量平均稳定状态压力的方法 |
Hydraulic Fluid Power - Systems and Products - Method of Measuring Average Steady-State Pressure |
| ANSI/(NFPA) T 2.12.10-1993 |
液力传动.系统和产品.常规测量,原理和公差 |
Hydraulic Fluid Power - Systems and Products - Testing General Measurement, Principles, and Tolerances |
| ANSI/(NFPA) T 2.13.1 R3-1998 |
工业液力传动系统耐火液体的使用规程 |
Use of Fire-Resistant Fluids for Industrial Hydraulic Fluid Power Systems, Practice for the |
| ANSI/(NFPA) T 2.13.4-1994 |
信息报告.液压用液体的保存,维护和处置推荐规程 |
Information Report - Recommendations for Conservation, Maintenance, and Disposal of Hydraulic Fluids |
| ANSI/(NFPA) T 2.13.5-1991 |
液力传动.工业系统.高水含量液体的操作规程 |
Hydraulic Fluid Power - Industrial Systems - Practice for the Use of High Water Content Fluids |
| ANSI/(NFPA) T 2.13.7 R1-1997 |
液力传动.石油流体.总体调节 |
Hydraulic Fluid Power - Petroleum Fluids - Prediction of Bulk Moduli |
| ANSI/(NFPA) T 2.13.8-1997 |
液力传动.耐火液体.定义,分类和试验 |
Hydraulic Fluid Power - Fire Resistant Fluids - Definitions, Classifications, and Testing |
| ANSI/(NFPA) T 2.24.2-1997 |
液压动力系统.提高密封可信度的方法 |
Hydraulic Fluid Power Systems - Methods to Improve Sealing Reliability |
| ANSI/(NFPA) T 2.30.1-1994 |
液压动力感应器选择的指南 |
Guide for Selection of Fluid Power Pressure Transducers |
| ANSI/(NFPA) T 2.6.1 R2-2000 |
液动件.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动件的压力的碎裂压力额定值的方法 |
Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component |
| ANSI/(NFPA) T 2.9.11-1989 |
液力传动.系统中油样品颗粒含量的测定方法 |
Hydraulic Fluid Power-Method of Determining the Particulate Count of an Oil Sample from a System (Using Liquid Automatic Counters) |
| ANSI/(NFPA) T 2.9.14-1993 |
液力传动.液体污染.重力计方法对固体污染水平的测定 |
Hydraulic Fluid Power - Fluid Contamination - Determination of Solid Contaminant Level by the Gravimetric Method |
| ANSI/(NFPA) T 3.10.17-1995 |
有限寿命液体过滤压力/寿命比.检验压力过滤器受压力外壳的疲劳寿命比率和破损压力比率的方法 |
Finite Life Hydraulic Filter Pressure/Life Rating - Method for Verifying the Fatigue Life Rating and the Burst Pressure Rating of the Pressure Containing Envelope of a Spin-On Hydraulic Filter |
| ANSI/(NFPA) T 3.10.4 R1-1991 |
液力传动.过滤器和分离器.图形符号补充 |
Hydraulic Fluid Power - Filters and Separators - Graphic Symbols Supplement |
| ANSI/(NFPA) T 3.10.5.1 R2-2000 |
液压过滤器/分离器外壳.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动过滤器/分离器的压力的碎裂压力额定值的方法 |
|
| ANSI/(NFPA) T 3.12.10 R2-2000 |
空气管路过滤器、调节器和/或润滑器.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动过滤器、调节器和/或润滑器的压力的碎裂压力额定值的方法 |
|
| ANSI/(NFPA) T 3.12.3 R2-1991 |
气压液动.压力调节器.工业类型 |
Pneumatic Fluid Power - Pressure Regulator - Industrial Type |
| ANSI/(NFPA) T 3.16.2 R1-1997 |
液力传动.非整体工业贮液器的设计 |
Hydraulic Fluid Power - Design for Nonintegral Industrial Reservoirs |
| ANSI/(NFPA) T 3.16.3 R1-1997 |
液力传动.非整体工业动力件的要求 |
Hydraulic Fluid Power - Requirements for Nonintegral Industrial Power Units |
| ANSI/(NFPA) T 3.19.25-1998 |
信息报告.液动系统.密封装置.弹性密封体和排除装置的储存,处理和安装 |
Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation of Elastomeric Seals and Exclusion Devices |
| ANSI/(NFPA) T 3.19.32-1992 |
旋转轴盖型密封件.第2部分:词汇 |
Rotary Shaft Lip Type Seals - Part 2: Vocabulary |
| ANSI/(NFPA) T 3.20.14-1990 |
气动快速反应耦合.塞尺寸 |
Pneumatic Quick-Action Couplings - Plug Dimensions |
| ANSI/(NFPA) T 3.20.15-1991 |
液力传动.快速反应耦合.急流面 |
Hydraulic Fluid Power - Quick-Action Coupling - Flush Face Type |
| ANSI/(NFPA) T 3.20.8 R2-2000 |
速动连接件.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动速动连接件的压力的碎裂压力额定值的方法 |
|
| ANSI/(NFPA) T 3.21.16-1997 |
气压液动.气动产品的通信和标签 |
Pneumatic Fluid Power - Labeling and Communication of Pneumatic Products |
| ANSI/(NFPA) T 3.21.3-1990 |
气压液动.固定件的流动率试验过程和报告方法. |
Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components |
| ANSI/(NFPA) T 3.21.4 R2-2000 |
气动阀.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动气动阀的压力的碎裂压力额定值的方法 |
Pneumatic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pneumatic valve |
| ANSI/(NFPA) T 3.21.8-1990 |
气压液动.反应时间的测量.直接控制阀门 |
Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves |
| ANSI/(NFPA) T 3.28.9 R1-1989 |
液压动力系统和产品.移动部件流动控制.图解方法 |
Fluid Power Systems and Products - Moving Parts Fluid Controls - Method of Diagramming |
| ANSI/(NFPA) T 3.29.2 R2-2000 |
压力开关.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动压力开关的压力的碎裂压力额定值的方法 |
Pressure switch - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pressure switch |
| ANSI/(NFPA) T 3.4.7 R2-2000 |
蓄能器.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动蓄能器的压力的碎裂压力额定值的方法 |
Accumulator - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power accumulator |
| ANSI/(NFPA) T 3.5.14 R1-1997 |
液力传动.直接控制阀门.分界特性的测定方法 |
Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics |
| ANSI/(NFPA) T 3.5.26 R2-2000 |
液压阀.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动液压阀的压力的碎裂压力额定值的方法 |
Hydraulic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power hydraulic valve |
| ANSI/(NFPA) T 3.5.28 R1-1997 |
液力传动.阀门.压力不同的流量特性.测量和记录方法 |
Hydraulic Fluid Power - Valves - Pressure Differential-Flow Characteristic - Method of Measuring and Recording |
| ANSI/(NFPA) T 3.5.45-1996 |
液力传动.两孔滑动盒式阀门.容量 |
Hydraulic Fluid Power - Two-Port Slip-In Cartridge Valves - Cavities (Technically equivalent to ISO 7368: 1989) |
| ANSI/(NFPA) T 3.5.46-1990 |
液力传动.阀门.压力释放固定接口 |
Hydraulic Fluid Power - Valves - Pressure Relief Mounting Interface |
| ANSI/(NFPA) T 3.6.29 R2-2000 |
连结杆或螺栓缸.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的连结杆或螺栓缸的压力的碎裂压力额定值的方法 |
|
| ANSI/(NFPA) T 3.6.31 R2-2000 |
伸缩缸和无螺栓端口结构缸.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动伸缩缸和无螺栓端口液压缸的压力的碎裂压力额定值的方法 |
|
| ANSI/(NFPA) T 3.6.37-1991 |
液力传动.气缸.屈曲负载的测定方法 |
Hydraulic Fluid Power - Cylinders - Method for Determining the Buckling Load |
| ANSI/(NFPA) T 3.6.54 R1-1997 |
液力传动.气缸孔.SAE直螺纹O形环和四螺栓法兰孔.ISO直螺纹O形环和四螺栓法兰孔.重载和轻载四方头接棒气缸 |
Hydraulic Fluid Power - Cylinder Ports - SAE Straight Thread O-Ring and Four-Bolt Flange Ports - ISO Straight Thread O-Ring and Four-Bolt Flange Ports - Heavy-Duty and Light-Duty Square Head Tie Rod Cylinders |
| ANSI/(NFPA) T 3.6.59-1993 |
液力传动.气缸.缓冲性能 |
Hydraulic Fluid Power - Cylinders - Cushion Performance |
| ANSI/(NFPA) T 3.6.7 R2-1996 |
流体动力系统和产品.正方形头气缸,固定尺寸 |
Fluid Power Systems and Products - Square Head Industrial Cylinders - Mounting Dimensions |
| ANSI/(NFPA) T 3.9.17 R2-1997 |
液力传动.无源替代泵.马达和整体传输.基本性能数据的试验和表示方法 |
Hydraulic Fluid Power - Positive Displacement Pumps, Motors and Integral Transmissions - Method of Testing and Presenting Basic Performance Data |
| ANSI/(NFPA) T 3.9.2 R3-1998 |
液力传动.定点替代泵和马达.固定法兰和轴末端的识别编码和尺寸 |
Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Dimensions and Identification Code for Mounting Flanges and Shaft Ends |
| ANSI/(NFPA) T 3.9.20-1992 |
液力传动.泵.压力补偿泵的基本性能数据的表示和试验方法 |
Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Pressure Compensated Pumps |
| ANSI/(NFPA) T 3.9.22 R2-2000 |
泵/电动机.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动泵和电动机的压力的碎裂压力额定值的方法 |
Pump/motor - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pump and motor |
| ANSI/(NFPA) T 3.9.31-2-1994 |
液力传动.马达特性的测定.第2部分:起动性 |
Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 2: Startability |
| ANSI/(NFPA) T 3.9.33-1997 |
液力传动.泵.负载感应泵基本性能数据的表示和试验方法 |
Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Load Sensing Pumps |
| ANSI/(NFPA) T3.19.25 R1-2004 |
信息报告.液压系统.密封装置.弹性密封件和隔离装置的存储、搬运和安装 |
|
| ANSI/(NFPA/JIC) T 2.24.1-1991 |
液力传动.固定工业机械的系统标准 |
Hydraulic Fluid Power - Systems Standard for Stationary Industrial Machinery |
| ANSI/AAMA 1002.10-1993 |
窗和滑动玻璃门用防暴风雨产品 |
Insulating Storm Products for Windows and Sliding Glass Doors |
| ANSI/AAMA 101-1993 |
铝和PVC制优质窗和玻璃门 |
Aluminum and Poly(Vinyl Chloride) (PVC) Prime Windows and Glass Doors |
| ANSI/AAMA 1402-1986 |
铝制壁板、拱腹及挑口板的标准规范 |
Standard Specifications for Aluminum Siding, Soffit and Fascia |
| ANSI/AAMA 396-1998 |
数控缝纫机 |
Numerically Controlled Fabric Sewing Machines |
| ANSI/AAMI AT 6-1991 |
自体输注装置 |
Autologous Transfusion Devices |
| ANSI/AAMI BE78-2002 |
医疗设施的生物评定.第10部分:刺激作用和致敏作用试验 |
(Biological Evaluation of Medical Devices - Part 10: Tests for Irritation and Sensitization ) |
| ANSI/AAMI BF 7-1989 |
血液输注微生物过滤器 |
Blood Transfusion Micro-Filters |
| ANSI/AAMI BF64-2002 |
白细胞减数分裂过滤器 |
(Leukocyte Reduction Filters ) |
| ANSI/AAMI BP 22-1994 |
血压传导器 |
Blood Pressure Transducers |
| ANSI/AAMI DF 2-1996 |
心脏去纤颤器装置 |
Cardiac Defibrillator Devices |
| ANSI/AAMI DF 39-1993 |
自动去纤颤器和远程控制去纤颤器 |
Automatic External Defibrillators and Remote-Control Defibrillators |
| ANSI/AAMI DF80-2003 |
医疗电气设备.第2-4部分:心脏去纤颤器安全性的特殊要求(包括自动化的外部去纤颤器) |
(Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiac defibrillators (including automated external defilrillators) ) |
| ANSI/AAMI EC 11R-1991 |
诊断用心电图记录装置 |
Diagnostic Electrocardiographic Devices |
| ANSI/AAMI EC 12-1991 |
一次性ECG电极 |
Disposable ECG Electrodes |
| ANSI/AAMI EC 13-1992 |
心脏监测仪,心率仪和警报 |
Cardiac Monitors, Heart Rate Meters, and Alarms |
| ANSI/AAMI EC 38-1994 |
可移动的心电诊断仪 |
Ambulatory Electrocardiographs |
| ANSI/AAMI EC 53-1995 |
ECGA电缆和线 |
ECG Cables and Wires |
| ANSI/AAMI EC 57-1998 |
心律和窦性心动过速部分测量法的结果检验和报告 |
Testing and Reporting Performance Results of Cardiac Rhythm and ST Segment Measurement Algorithms |
| ANSI/AAMI EC 71-2001 |
计算机辅助的心电图描计术的标准通信协议 |
Standard Communications Protocol for Computer-Assisted Electrocardiography |
| ANSI/AAMI ES 1-1993 |
医疗装置的安全电流限值 |
Safe Current Limits for Electromedical Apparatus |
| ANSI/AAMI HE 48-1993 |
医疗装置设计的优选规程和人因素工程指南 |
Human Factors Engineering Guidelines and Preferred Practices for the Design of Medical Devices |
| ANSI/AAMI HF 18-1993 |
电子外科装置 |
Electrosurgical Devices |
| ANSI/AAMI ID 26-1992 |
注射装置 |
Infusion Devices |
| ANSI/AAMI ID 54-1996 |
肠饲喂连接器和适配器 |
Enteral Feeding Set Connectors and Adapters |
| ANSI/AAMI II 36-1997 |
婴儿恒温箱 |
Infant Incubators |
| ANSI/AAMI II 51-1996 |
运输型婴儿保育箱 |
Transport Infant Incubators |
| ANSI/AAMI NS 14-1995 |
可植入的脊柱刺激器 |
Implantable Spinal Cord Stimulators |
| ANSI/AAMI NS 15-1995 |
可植入的外周神经刺激器 |
Implantable Peripheral Nerve Stimulators |
| ANSI/AAMI NS 28-1988 |
颅内压力监测装置 |
Intracranial Pressure Monitoring Devices |
| ANSI/AAMI NS 4-1985 |
经皮电刺激的神经刺激器 |
Transcutaneous Electrical Nerve Stimulators |
| ANSI/AAMI PAC 49-1993 |
紧急起搏插入系统 |
Pacemaker Emergency Intervention System |
| ANSI/AAMI RD 16-1996 |
先用血液透析器 |
First-Use Hemodialyzers |
| ANSI/AAMI RD 17-1994 |
血液透析血管接管 |
Hemodialyzer Blood Tubing |
| ANSI/AAMI RD 47-1993 |
血液透析器的再应用 |
Reuse of Hemodialyzers |
| ANSI/AAMI RD 5-1992 |
血液透析系统 |
Hemodialysis Systems |
| ANSI/AAMI RD 62-2001 |
血液透析应用的水处理设备 |
Water Treatment Equipment for Hemodialysis Applications |
| ANSI/AAMI RD17-2005 |
血液透析器血液导管 |
|
| ANSI/AAMI RD17/A1-2002 |
人造肾血管.修改件1 |
(Hemodialyzer Blood Tubing-Amendment 1 ) |
| ANSI/AAMI RD47-2002 |
血液透析器的再使用 |
(Reuse of Hemodialyzers ) |
| ANSI/AAMI RD47:2002/A1-2003 |
血液透析器的重复使用.修改件1 |
(Reuse of Hemodialyzers Amendment 1 ) |
| ANSI/AAMI RD5-2003 |
血液透析系统 |
(Hemodialysis Systems ) |
| ANSI/AAMI SP 10-1992 |
电子的或自动的血压计 |
Electronic or Automated Sphygmomanometers |
| ANSI/AAMI SP 10A-1996 |
电子的或自动的血压计 |
Electronic or Automated Sphygmonanometers |
| ANSI/AAMI SP 9-1994 |
非自动血压计 |
Non-Automated Sphygmomanometers |
| ANSI/AAMI SP10-2002 |
手工、电子或自动血压计 |
(Manual, Electronic, or Automated Sphygmomanometers ) |
| ANSI/AAMI ST 19-1985 |
保健机构饱和蒸汽灭菌过程的生物指示器 |
Biological Indicators for Saturated Steam Sterilization Processes in Health Care Facilities |
| ANSI/AAMI ST 21-1986 |
保健机构环氧乙烷灭菌过程的生物指示器 |
Biological Indicators for Ethylene Oxide Sterilization Processes in Health Care Facilities |
| ANSI/AAMI ST 24-1992 |
用于保健机构的一般用途的环氧乙烷自动灭菌器和无菌源 |
Automatic, General-Purpose Ethylene Oxide Sterilizers and Ethylene Oxide Sterilant Sources Intended for Use in Health Care Facilities |
| ANSI/AAMI ST 33-1996 |
保健机构中环氧乙烷灭菌和蒸气灭菌用可再次使用的硬质灭菌容器的使用和选择指南 |
Guidelines for the Selection and Use of Reusable Rigid Sterilization Container Systems for Ethylene Oxide Sterilization and Steam Sterilization in Health Care Facilities |
| ANSI/AAMI ST 34-1991 |
工业灭菌处理中环氧乙烷和蒸气灭菌生物指示器的使用指南 |
Guideline for the Use of Ethylene Oxide and Steam Biological Indicators in Industrial Sterilization Processes |
| ANSI/AAMI ST 35-1996 |
保健机构和非门诊单位医疗装置的生物净化和安全处理 |
Safe Handling and Biological Decontamination of Medical Devices in Health Care Facilities and in Nonclinical Settings |
| ANSI/AAMI ST 37-1996 |
火焰灭菌.立即使用的病人护理蒸气灭菌 |
Flash Sterilization - Steam Sterilization of Patient Care Items for Immediate Use |
| ANSI/AAMI ST 40-1992 |
牙科和医疗机构的台式干热(加热的空气)灭菌和无菌性 |
Table-Top Dry Heat (Heated Air) Sterilization and Sterility Assurance in Dental and Medical Facilities |
| ANSI/AAMI ST 41-1992 |
良好的医院操作规程.环氧乙烷灭菌和蒸气灭菌的保障 |
Good Hospital Practice, Ethylene Oxide Sterilization and Sterility Assurance |
| ANSI/AAMI ST 42-1998 |
非卧床护理,医疗和牙科机构,办公室护理的蒸气灭菌和灭菌保证 |
Steam Sterilization and Sterility Assurance in Office-Based, Ambulatory-Care, Medical and Dental Facilities |
| ANSI/AAMI ST 43-1993 |
良好的医院操作规程:环氧乙烷气体.通风推荐规程和安全使用 |
Good Hospital Practice: Ethylene Oxide Gas - Ventilation Recommendations and Safe Use |
| ANSI/AAMI ST 44-1992 |
BIER/EO气体容器 |
BIER/EO Gas Vessels |
| ANSI/AAMI ST 45-1992 |
BIER/蒸气容器 |
BIER/Steam Vessels |
| ANSI/AAMI ST 46-1993 |
良好的医院操作规程:蒸气灭菌和灭菌保证 |
Good Hospital Practice: Steam Sterilization and Sterility Assurance |
| ANSI/AAMI ST 50-1995 |
干热(加热空气)灭菌器 |
Dry Heat (Heated Air) Sterilizers |
| ANSI/AAMI ST 55-1997 |
台式蒸气灭菌器 |
Table-Top Steam Sterilizers |
| ANSI/AAMI ST 58-1996 |
保健机构中戊二醛产品的安全使用和处理 |
Safe Use and Handling of Glutaraldehyde-Based Products in Health Care Facilities |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com