标准号 |
中文名称 |
英文名称 |
ANSI/ASTM D5623-2004 |
用气相色谱法和硫化选择性检测法测定轻质石油液体中硫化物的试验方法 |
|
ANSI/ASTM D5663-2003 |
包装纸和纸板回收成分确认的指南 |
(Guide for Validating Recycled Content in Packaging Paper and Paperboard ) |
ANSI/ASTM D5672-2003 |
柔性泡沫材料的试验方法.用25-mm (1in.)挠曲法测量压痕力挠度 |
(Test Method for Flexible Cellular Materials--measurement of Indentation Force Deflection Using a 25-mm (1in.) Deflection Technique ) |
ANSI/ASTM D5673-2002 |
采用电感耦合等离子体质谱法测试水中素的方法 |
(Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectometry ) |
ANSI/ASTM D5673-2004 |
采用电感耦合等离子体质谱法测试水中素的试验方法 |
|
ANSI/ASTM D56a-2002 |
用泰格(Tag)密封试验器测定闪点的试验方法 |
(Flash Point by Tag Closed Tester, Method of Test for (05.01, 06.03) ) |
ANSI/ASTM D5704-2004 |
手动传输和主传动轴用润滑油的热稳定性和氧化稳定性评价的试验方法 |
(Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmission and Final Drive Axles (05.03) ) |
ANSI/ASTM D5704-2005 |
评价手动传输和主传动轴用润滑油的热稳定性和氧化稳定性的试验方法 |
|
ANSI/ASTM D5705-2004 |
残留燃料油上气相中测定硫化氢的试验方法 |
|
ANSI/ASTM D5705-2004 |
残留燃料油上气相中测定硫化氢的试验方法 |
(Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase above Residual Fuel Oils (05.03) ) |
ANSI/ASTM D5760-2005 |
人工传输齿轮润滑剂性能规范(05.03) |
|
ANSI/ASTM D5762-2005 |
用船进气化学发光法测定石油和石油产品中氮的试验方法 |
|
ANSI/ASTM D5769-2004 |
用气相色谱/质谱法测定精制汽油中苯、甲苯和总芳香族含量的试验方法 |
|
ANSI/ASTM D5770-2002 |
半定量法微观测定废润滑油酸值的试验方法 |
(Test Method for Semi-Quantitative Micro Determination of Acid Number of Used Lubricating Oils ) |
ANSI/ASTM D5771-2003 |
石油产品始凝点的试验方法.光学检测逐级降温法 |
(Test Method for Cloud Point of Petroleum Products - Optical Detection Stepped Cooling Method ) |
ANSI/ASTM D5771-2004 |
石油产品始凝点的试验方法.光学检测逐级降温法 |
|
ANSI/ASTM D5771-2004 |
石油产品始凝点的试验方法.光学检测逐级降温法 |
|
ANSI/ASTM D5771-2005 |
石油产品始凝点的试验方法.光学检测逐级降温法 |
|
ANSI/ASTM D5772-2003 |
石油产品始凝点的试验方法.线性降温率法 |
(Test Method for Cloud Point of Petroleum Products - Linear Cooling Rate Method ) |
ANSI/ASTM D5772-2004 |
石油产品始凝点的试验方法.线性降温率法 |
|
ANSI/ASTM D5772-2004 |
石油产品始凝点的试验方法.线性降温率法 |
|
ANSI/ASTM D5772-2005 |
石油产品始凝点的试验方法.线性降温率法 |
|
ANSI/ASTM D5773-2003 |
石油产品始凝点的试验方法.恒定降温率法 |
(Test Method for Cloud Point of Petroleum Products - Constant Cooling Rate Method ) |
ANSI/ASTM D5773-2004 |
石油产品始凝点的试验方法.恒定降温率法 |
|
ANSI/ASTM D5773-2005 |
石油产品始凝点的试验方法(恒定降温率法) |
|
ANSI/ASTM D5800-2003 |
用 Noack法评定润滑油蒸发损耗的试验方法 |
(Test Method for Evaporation Loss of Lubricating Oils by the Noack Method ) |
ANSI/ASTM D5800a-2005 |
Noack法测定润滑油的蒸发损失的试验方法 |
|
ANSI/ASTM D5813-2004 |
现场固化的热固性树脂污水管规范 |
|
ANSI/ASTM D5842-2004 |
挥发性测量用燃料的取样和搬运的实施规程 |
|
ANSI/ASTM D5846-2002 |
液压流体和涡轮机油的一般氧化试验试验方法 |
(Test Method for Universal Oxidation Test for Hydraulic Fluids and Turbine Oils ) |
ANSI/ASTM D5847-2002 |
水分析标准试验方法的质量控制规范编写实施规程 |
(Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis ) |
ANSI/ASTM D5857-2002 |
采用ISO协议和方法的聚酯塑料注入和挤压材料的规范 |
(Specification for Propylene Plastic Injection and Extrusion Materials Using ISO Protocol and Methodology ) |
ANSI/ASTM D5862-2004 |
二冲程循环涡轮增压6v92ta柴油发动机机油评价的试验方法 |
|
ANSI/ASTM D5862-2004 |
二冲程循环涡轮增压6v92ta柴油发动机机油评价的试验方法 |
(Test Method for Evaluation of Engine Oils in the Two-Stroke Cycle Turbo-Supercharged 6v92ta Diesel Engine ) |
ANSI/ASTM D5901-2003 |
航空燃料冻结点的试验方法(自动光学方法) |
(Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) ) |
ANSI/ASTM D5904-2002 |
通过紫外线、过硫酸盐氧化物和薄膜电导率检测对水中全部碳、有机碳和无机碳的试验方法 |
(Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection ) |
ANSI/ASTM D5906-2002 |
表面水纵深测量过程中测量水平位置的指南 |
(Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths ) |
ANSI/ASTM D5927-2003 |
基于ISO 试验方法的热塑性聚酯(TPES)注塑和挤塑材料规范 |
(Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods ) |
ANSI/ASTM D5950-2002 |
石油产品的倾点试验方法(自动倾斜法) |
(Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) ) |
ANSI/ASTM D5966-2002 |
评定轻型柴油发动机中滚轮从动杆防磨损用机油的试验方法 |
(Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine ) |
ANSI/ASTM D5967-2003 |
评价T8型柴油发动机机油的试验方法 |
(Test Method for Evaluation of Diesel Engine Oils in the T8 Diesel Engine ) |
ANSI/ASTM D5968-2004 |
评价柴油发动机机油腐蚀性的试验方法 |
|
ANSI/ASTM D5969-2002 |
在稀释合成海水作用下测定润滑脂防腐性能的试验方法 |
(Test Method for Corrosion Preventive Properties of Lubricating Greases in the Presence of Dilute Synthetic Sea Water Environments ) |
ANSI/ASTM D5969-2005 |
在含稀释合成海水环境下测定润滑脂防腐性能的试验方法 |
|
ANSI/ASTM D5972-2002 |
航空燃料冻结点的试验方法(自动相移法) |
(Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) ) |
ANSI/ASTM D5985-2002 |
石油产品的倾点试验方法(旋转法) |
(Test Method for Pour Point of Petroleum Products (Rotational Method) ) |
ANSI/ASTM D6070-2002 |
预组装的电线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性的试验方法 |
(Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable ) |
ANSI/ASTM D6079-2002 |
用高频往复移动式装置评价柴油燃料润滑性的试验方法 |
(Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) ) |
ANSI/ASTM D6091-2003 |
可忽略校准误差的分析方法用99%95%实验室间检测评估(IDE)实施规范 |
(Practice for 99%/95% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error ) |
ANSI/ASTM D6096-2002 |
90C操作的电线和电缆用聚氯乙烯绝缘规范 |
(Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation ) |
ANSI/ASTM D6099-2003 |
聚氨酯原材料的试验方法:中等酸度至高酸度芳香异氰酸酯酸度的测定 |
(Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates ) |
ANSI/ASTM D6108-2003 |
塑料块材和型材的抗压特性的试验方法 |
(Test Method for Compressive Properties of Plastic Lumber and Shapes ) |
ANSI/ASTM D6109-2003 |
未增强和增强的塑料块材的弯曲特性的试验方法 |
(Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber ) |
ANSI/ASTM D611-2004 |
石油产品和烃类溶剂的混合苯胺点和苯胺点的试验方法 |
|
ANSI/ASTM D6111-2003 |
用位移法测定塑料块材的体密度和比重的试验方法 |
(Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement ) |
ANSI/ASTM D6113-2003 |
使用锥形量热计对包含在电气或光纤电缆中的绝缘材料的着火试验反应特性测定的标准试验方法 |
(Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables ) |
ANSI/ASTM D6121-2004 |
主动双曲面驱动轴用润滑剂在低速和大扭力条件下载荷能力评价的试验方法 |
|
ANSI/ASTM D6121-2004 |
主动双曲面驱动轴用润滑剂在低速和大扭力条件下载荷能力评价的试验方法 |
(Test Method for Evaluation of the Load Carrying Capacity of Lubricants under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles ) |
ANSI/ASTM D6121-2005 |
评价主动双曲面驱动轴用润滑剂在低速和大扭力条件下载荷能力的试验方法 |
|
ANSI/ASTM D613-2005 |
柴油十六烷值的试验方法 |
|
ANSI/ASTM D6138-2003 |
在动态潮湿环境中测定润滑油脂防腐性的试验方法(EMCOR试验) |
(Test Method for Determination of Corrosion Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test) ) |
ANSI/ASTM D613a-2003 |
柴油十六烷值的试验方法 |
(Test Method for Cetane Number of Diesel Fuel Oil ) |
ANSI/ASTM D6158-2005 |
矿物液压油规范 |
|
ANSI/ASTM D6201-2003 |
进油阀沉积物形成用无铅火花点火发动机燃料的功率计评价试验方法 |
(Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation ) |
ANSI/ASTM D6201-2004 |
进油阀沉积物形成用无铅火花点火发动机燃料的功率计评价用试验方法 |
|
ANSI/ASTM D6202-2002 |
测定载有火花点燃式发动机的小轿车和轻型卡车的汽车发动机油节油效果的试验方法 |
(Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence via Spark Ignition Engine ) |
ANSI/ASTM D6224-2002 |
辅助动力装置用润滑油的使用监测实施规范 |
(Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment ) |
ANSI/ASTM D6299-2002 |
应用统计质量保证技术评估分析测量系统性能的实施规程 |
(Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance ) |
ANSI/ASTM D6300-2003 |
石油产品和润滑剂试验方法中使用的精确度和偏差数据测定的实施规范 |
(Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants ) |
ANSI/ASTM D6300-2004 |
石油产品和润滑剂试验方法中使用的精确度和偏差数据测定的实施规程 |
|
ANSI/ASTM D6301-2003 |
水中可滤和不可滤物质的样品采集实施规程 |
(Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water ) |
ANSI/ASTM D6304-2003 |
利用库仑卡尔.费歇尔滴定法测定石油产品、润滑油、添加剂中水含量的试验方法 |
(Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration ) |
ANSI/ASTM D6304-2004 |
利用库仑卡尔.费歇尔滴定法测定石油产品、润滑油和添加剂中水含量的试验方法 |
|
ANSI/ASTM D6318-2003 |
用棒测法校准回声测深仪的操作规程 |
(Practice for Calibrating a Fathometer Using a Bar Check Method ) |
ANSI/ASTM D6335-2002 |
用热氧化机油模拟试验测定高温沉淀物的试验方法 |
(Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test ) |
ANSI/ASTM D6352-2004 |
用气相色谱法测定174℃-700℃沸腾范围内石油馏份的沸腾范围分布的试验方法 |
(Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range of 174 to 700 C by Gas Chromatography ) |
ANSI/ASTM D6352a-2004 |
用气相色谱法在174 到 700 C沸腾范围间测定石油馏出物沸点范围分布的试验方法 |
|
ANSI/ASTM D6354-2004 |
用于铝生产的碳阴极块的取样计划和芯取样的指南 |
|
ANSI/ASTM D6354-2004 |
用于铝生产的碳阴极块的取样计划和芯取样的指南 |
(Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production ) |
ANSI/ASTM D6371-2005 |
柴油和加热燃料冷却过滤堵塞点的试验方法 |
|
ANSI/ASTM D6375-2005 |
用热重分析仪(TGA)Noack法测定润滑油蒸发损耗的试验方法 |
|
ANSI/ASTM D6377-2004 |
原油蒸气压力测定的试验方法:Vpcrx(膨胀法) |
|
ANSI/ASTM D6378-2004 |
测定石油产品、碳氢化合物和氧化烃类混合物的蒸气压力Vpx的试验方法(三胀法) |
|
ANSI/ASTM D6379-2004 |
测定航空燃料和石油馏份中芳香烃类的标准试验方法.带有反射指数检测的高效液相色谱法 |
|
ANSI/ASTM D6417-2002 |
用毛细管气相色谱法评估机油挥发性的试验方法 |
(Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography ) |
ANSI/ASTM D6424a-2004 |
测定自燃吸气火花点火式飞机发动机燃料辛烷值的操作规程 |
|
ANSI/ASTM D6425a-2002 |
用SRV试验机测量耐特高压(EP)润滑油摩擦和抗磨损特性的试验方法 |
(Test Method for Measuring Friction and Wear Properties of EP Lubricating Oils Using the SRV Test Machine ) |
ANSI/ASTM D6426a-2002 |
测定中间馏出燃料油可过滤性的试验方法 |
(Test Method for Determining Filterability of Middle Distillate Fuel Oils ) |
ANSI/ASTM D6439-2005 |
蒸汽、气体和水电涡轮润滑系统的清洁、冲洗和纯化指南 |
|
ANSI/ASTM D6447-2004 |
用伏安测量分析法测定航空涡轮燃料的氢过氧化物值的试验方法 |
|
ANSI/ASTM D6447-2004 |
用伏安测量分析法测定航空涡轮燃料的氢过氧化物值的试验方法 |
(Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis ) |
ANSI/ASTM D6448-2004 |
来自废润滑油的工业锅炉燃料规范 |
|
ANSI/ASTM D6469-2004 |
燃料和燃料系统中微生物杂质指南 |
|
ANSI/ASTM D6483-2003 |
T-9柴油机使用的柴油机滑油的评定试验方法 |
(Test Method for Evaluation of Diesel Engine Oils in the T-9 Diesel Engine ) |
ANSI/ASTM D6501-2004 |
卤水中磷酸的试验方法 |
|
ANSI/ASTM D6512-2003 |
实验室间定量评价的实施规程 |
(Practice for Interlaboratory Quantitation Estimate ) |
ANSI/ASTM D6514-2003 |
汽轮机油高温通用氧化试验的试验方法 |
(Test Method for High Temperature Universal Oxidation Test for Turbine Oils (1) ) |
ANSI/ASTM D6557-2004 |
汽车机油防锈特性评价的试验方法 |
|
ANSI/ASTM D6557-2004 |
汽车机油防锈特性评价的试验方法 |
(Test Method for Evaluation of the Rust Preventive Characteristics of Automotive Engine Oils ) |
ANSI/ASTM D6593-2004 |
在低温和低载条件下运行的使用汽油燃料的火花点火式内燃机中抑制沉积物形成用汽车机油评价的试验方法 |
(Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions ) |
ANSI/ASTM D6593-2005 |
评价在低温和低载条件下运行的使用汽油燃料的火花点火式内燃机中抑制沉积物形成用汽车机油的试验方法 |
|
ANSI/ASTM D6594-2004 |
135℃时柴油机油腐蚀性评价的试验方法 |
(Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135oC ) |
ANSI/ASTM D6615-2002 |
喷射B类宽馏分航空涡轮机燃料规范 |
(Specification for Jet B Wide-Cut Aviation Turbine Fuel ) |
ANSI/ASTM D6615-2005 |
喷射B类宽馏分航空涡轮机燃料规范 |
|
ANSI/ASTM D664-2004 |
用电势滴定法测定石油产品酸度值的试验方法 |
|
ANSI/ASTM D665-2004 |
在有水条件下蒸汽涡轮机油防锈特性的试验方法 |
|
ANSI/ASTM D665-2004 |
在有水条件下蒸汽涡轮机油防锈特性的试验方法 |
(Rust-Preventing Characteristics of Steam-Turbine Oil in the Presence of Water, Method of Test for (05.01) ) |
ANSI/ASTM D6708-2004 |
测量某种材料相同特性的两种试验方法间预期一致性的提高和统计评定的实施规程 |
|
ANSI/ASTM D6709-2004 |
序列VIII火花点火发动机中汽车机油评价的试验方法(CLR油试验发动机) |
(Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) ) |
ANSI/ASTM D6710-2002 |
烃基淬火油评价指南 |
(Guide for Evaluation of Hydrocarbon-Based Quench Oil ) |
ANSI/ASTM D6732-2002 |
用石墨炉原子吸收光谱测定法测定喷气发动机燃料中铜含量的试验方法 |
(Test Method for the Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry ) |
ANSI/ASTM D6735-2002 |
测量矿物焙烧排气源中的气体氯化物和氟化物的试验方法. 撞击器方法 |
(Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources - Impinger Method ) |
ANSI/ASTM D6748a-2002 |
测定由Phenalenes和Phenalenones存在而产生的中间馏出燃料的潜在不稳定性的试验方法.便携式光谱仪的快速测 |
(Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones. Rapid Method by Portable Spectrophotometer ) |
ANSI/ASTM D6749-2002 |
石油产品的倾点试验方法(自动空气压力法) |
(Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) ) |
ANSI/ASTM D6750-2002 |
评估高速单缸柴油发动机中机油的试验方法.1k程序(0.4%燃料硫)和1n程序(0.4%燃料硫) |
(Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - 1k Procedure (0.4% Fuel Sulfur) and 1n Procedure (0.04% Fuel Sulfur) ) |
ANSI/ASTM D6750-2005 |
评价高速单缸柴油发动机机油的试验方法.1k程序(0.4%燃料硫)和1n程序(0.04%燃料硫) |
|
ANSI/ASTM D6751-2004 |
蒸馏燃料用生物柴油燃料(B100)混合材料的临时规范 |
|
ANSI/ASTM D6751-2004 |
蒸馏燃料用生物柴油燃料(B100)混合材料的临时规范 |
(Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels ) |
ANSI/ASTM D6756-2002 |
使用便携式光谱检测仪测定红染料污染浓度和估算柴油和加热油的 ASTM色彩的试验方法 |
(Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer ) |
ANSI/ASTM D6777-2002 |
测定三氯乙烯的相对硬度的试验方法 |
(Test Method for Relative Rigidity of Poly(Vinyl Chloride) (PVC) Siding ) |