标准号 |
中文名称 |
英文名称 |
| ANSI/ASTM F 1476-1997 |
管道用装衬垫的机械连接器的性能规范 |
Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ANSI/ASTM F 1494-2001 |
防护服装的相关术语 |
Terminology Relating to Protective Clothing |
| ANSI/ASTM F 1499-2001 |
共挤制复合排水、排污、排气管(DWV)的规范 |
Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DMV) (1) |
| ANSI/ASTM F 1504-1996 |
现有污水管和下水管修复用波纹聚氯乙烯管的规范 |
Specification for Folded Poly (Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
| ANSI/ASTM F 1508-1997 |
用于蒸汽、气体和液体设备的角型减压阀规范 |
Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ANSI/ASTM F 1533-2001 |
变形的聚乙烯内衬规范 |
Specification for Deformed Polyethylene (PE) Liner |
| ANSI/ASTM F 1534M-1996 |
衬垫材料水淋洗后燃烧试验响应特性变化测定的试验方法 |
Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials after Water Leaching |
| ANSI/ASTM F 1545-1996 |
有塑料内衬的铁合金管、配件和法兰的规范 |
Specification for Plastic-Lined Ferrous Metal Pipe, Fittings and Flanges |
| ANSI/ASTM F 1548-1997 |
管道用装衬垫的机械连接件配件的性能规范 |
Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ANSI/ASTM F 1563-2001 |
聚乙烯(PE)燃气管道挤压工具规范 |
Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing |
| ANSI/ASTM F 1567-1997 |
制造的或铸造的自动清洗燃料油和润滑油过滤器规范 |
Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
| ANSI/ASTM F 1577-2002 |
摆动门卡锁的试验方法 |
Test Methods for Detention Locks for Swinging Doors |
| ANSI/ASTM F 1588-1996 |
恒定拉伸载荷连接试验的试验方法 |
Test Method for Constant Tensile Load Joint Test (CTLJT) |
| ANSI/ASTM F 1589-1996 |
塑料管急速破裂扩展临界压力的测定试验方法 |
Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe |
| ANSI/ASTM F 1592-1995 |
隔离用空心金属可视系统试验方法 |
Test Method for Detention Hollow Metal Vision Systems |
| ANSI/ASTM F 1606-1996 |
现存下水道和管道的聚乙烯(PE)内衬变形复原的实施规程 |
Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner |
| ANSI/ASTM F 1637-1997 |
安全行走表面的实施规程 |
Practice for Safe Walking Surfaces |
| ANSI/ASTM F 1643-2002 |
锁销式滑动门锁装置系统的试验方法 |
Test Methods for Detention Sliding Door Locking Device Assembly |
| ANSI/ASTM F 1669M-1997 |
船用电气系统用绝缘监视器规范(米制) |
Specification for Insulation Monitors for Shipboard Electrical Systems (Metric) |
| ANSI/ASTM F 1671-1997 |
用病毒穿透率的试验系统测试防护服材料抗血液携带病原体渗透性的试验方法 |
Test Method for Resistance of Protective Clothing Materials to Penetration by Blood-Borne Pathogens Using Viral Penetration as a Test System |
| ANSI/ASTM F 1673-1996 |
聚偏氟乙烯(PVDF)腐蚀废物排放系统的规范 |
Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
| ANSI/ASTM F 1674-1996 |
联接PVC管用的减震装置的规范 |
Specification for Joint Restraint Products for Use with PVC Pipe |
| ANSI/ASTM F 1677-1997 |
使用便携式可倾斜铰链支杆滑动测试仪(PIAST)的试验方法 |
Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) |
| ANSI/ASTM F 1678-1997 |
使用便携式铰链支杆滑动测试仪(PAST)的测试方法 |
Test Method for Using a Portable Articulated Strut Slip Tester (PAST) |
| ANSI/ASTM F 1685-2000 |
空气或氮系统减压歧管规范 |
Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems |
| ANSI/ASTM F 1698-1996 |
现存排污管和管道修复用聚氯乙烯轮廓条衬里和水泥薄浆的安装实施规程 |
Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ANSI/ASTM F 1716-1997 |
船用软件系统的性能和转换维护用指南 |
Guide for Transition and Performance of Marine Software Systems Maintenance |
| ANSI/ASTM F 1731-2000 |
消防和救援人员制服及其他隔热保护服装的人体测量与尺寸标注的实施规程 |
Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard |
| ANSI/ASTM F 1734-1996 |
为避免聚乙烯燃气管长期受损用挤压工具、管和挤压工序组合的鉴定实施规程 |
Practice for Qualification of a Combination of Squeeze Tool, Pipe and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe |
| ANSI/ASTM F 1741-2002 |
现有排水沟和管道修复用机械螺旋缠绕聚氯乙烯(PVC)内衬管安装的实施规范 |
Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits |
| ANSI/ASTM F 1750-1996 |
彩弹球枪加螺纹推进装置接口规范 |
Specification for Paintball Gun Threaded Propellant Source Interface |
| ANSI/ASTM F 1752-1996 |
射箭弓弦用材料的试验方法 |
Test Method for Archery Bow Component - Cord Material |
| ANSI/ASTM F 1753-1996 |
与箭弓一起使用的单镜头观测镜分类和标记规范 |
Specification for, Classification and Marking of Single Lens Scopes for Use with Archery Bows |
| ANSI/ASTM F 1756-1997 |
舰队管理系统网络实施指南 |
Guide for Implementation of a Fleet Management System Network |
| ANSI/ASTM F 1757-1996 |
计算机系统数字通讯协议指南 |
Guide for Digital Communication Protocols for Computerized Systems |
| ANSI/ASTM F 1759-1997 |
地下高密度聚乙烯人孔实施规程 |
Practice for HDPE Manholes for Subsurface Applications |
| ANSI/ASTM F 1760-2001 |
含有再加工-再生材料的聚氯乙烯无压塑料管规范 |
Specification for Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
| ANSI/ASTM F 1776-2001 |
彩弹球运动用眼部保护装置规范 |
Specification for Eye Protective Devices for Paintball Sports |
| ANSI/ASTM F 1786-1997 |
烤肉炉性能的试验方法 |
Test Method for Performance of Rotisserie Ovens |
| ANSI/ASTM F 1799-1997 |
船上生成废物管理审核的指南 |
Guide for Shipboard Generated Waste Management Audits |
| ANSI/ASTM F 1803-1997 |
基于可控内径的聚氯乙烯封闭异形重力管的规范 |
Specification for Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter |
| ANSI/ASTM F 1804-1997 |
测定牵引装配时聚乙烯气管可允许抗拉荷载的实施规程 |
Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation |
| ANSI/ASTM F 1807-1999 |
Sdr9交联聚乙烯管用的利用卷制铜环的金属内插件规范 |
Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for Sdr9 Cross-Linked Polyethylene (Pex) Tubing |
| ANSI/ASTM F 1833-1997 |
跑鞋后脚运动控制特性对比试验方法 |
Test Method for Comparison of Rearfoot Motion Control Properties of Running |
| ANSI/ASTM F 1836M-1997 |
填料管、尼龙和包装配件规范(米制) |
Specification for Stuffing Tubes, Nylon; and Packing Assemblies (Metric) |
| ANSI/ASTM F 1837M-1997 |
热缩电缆引入密封规范(米制) |
Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ANSI/ASTM F 1870-2001 |
在滞留和校正设备中评定装饰家具着火试验方法的选择指南 |
Guide for Selection of Fire Test Methods for Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| ANSI/ASTM F 1878-1998 |
护航船评价和选择的指南 |
Guide for Escort Vessel Evaluation and Selection |
| ANSI/ASTM F 1887-1998 |
测量棒球和垒球回弹系数的试验方法 |
Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs |
| ANSI/ASTM F 1888-1998 |
棒球和垒球受压位移的试验方法 |
Test Method for Compression-Displacement of Baseballs and Softballs |
| ANSI/ASTM F 1889-1998 |
箭杆平直度测量规范 |
Specification for Straightness Measurement of Arrow Shafts |
| ANSI/ASTM F 1890-2001 |
垒球棒效率测量的试验方法 |
Test Method for Measuring Softball Bat Performance Factor |
| ANSI/ASTM F 1898-2001 |
睡袋易燃性试验方法 |
Test Method for Flammability of Sleeping Bags |
| ANSI/ASTM F 1916-1998 |
拘役用带涂层链节栅栏结构和圆柱的链节栅栏系统的选择规范 |
Specifications for Selecting Chain Link Barrier Systems with Coated Chain Link Fence Fabric and Round Posts for Detention Applications |
| ANSI/ASTM F 1924-2001 |
外直径可控聚乙烯气体分布管及管道系统用塑料机械配件的规范 |
Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| ANSI/ASTM F 1932-1998 |
睡袋纺织纤维回弹力测量的试验方法 |
Test Method for Measuring Sleeping Bag Loft |
| ANSI/ASTM F 1933-1998 |
插图说明背包式或登山用帐蓬触地面积的规范 |
Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent |
| ANSI/ASTM F 1935-2001 |
测量背负或登山帐蓬的峰高试验方法 |
Test Method for Measuring Peak Height of a Backpacking or Mountaineering Tent |
| ANSI/ASTM F 1936-1998 |
现场测量北美足球运动场地减震性能的规范 |
Specification for Shock-Absorbing of North American Football Playing Systems as Measured in the Field |
| ANSI/ASTM F 1961-1999 |
交联聚乙烯(PEX)管用带盘簧的金属机械冷压扩口式管接头规范 |
Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing |
| ANSI/ASTM F 1962-1999 |
包括渡口在内的障碍物下聚乙烯管道更换时最大水平方向打眼的使用指南 |
Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings |
| ANSI/ASTM F 1963-1999 |
敞口式燃气或电的深油煎锅规范 |
Specification for Deep-Fat Fryers, Gas or Electric, Open |
| ANSI/ASTM F 1964-1999 |
压力油炸器和锅状油炸器性能的试验方法 |
Test Method for the Performance of Pressure and Kettle Fryers |
| ANSI/ASTM F 1965-1999 |
台式炉性能的试验方法 |
Test Method for the Performance of Deck Ovens |
| ANSI/ASTM F 1970-2001 |
压力送水系统中使用的聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)专用工程配件或附属品规范 |
Specification for Special Engineered PVC or CPVC Fittings or Appurtenances for Use in Systems Conveying Water Under Pressure |
| ANSI/ASTM F 1973-1999 |
聚乙烯(PE)燃料气分配系统中工厂装配的阳级冒口和过渡配件规范 |
Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems |
| ANSI/ASTM F 1974-2001 |
聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插件规范 |
Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ANSI/ASTM F 1979-1999 |
彩弹球运动用球的规范 |
Specification for Paintballs Used in the Sport of Paintball |
| ANSI/ASTM F 1986-2001 |
冷热饮用水系统用复合管压合配件和压合接头的规范 |
Specification for Composite Pipe Compression Fittings and Compression Joints for Hot and Cold Drinking Water Systems |
| ANSI/ASTM F 1987-2001 |
循环加热系统用2型多层管、压合配件和压合接头的规范 |
Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems |
| ANSI/ASTM F 1994-2000 |
船载固定泡沫灭火系统的试验方法 |
Test Method for Shipboard Fixed Foam Firefighting Systems |
| ANSI/ASTM F 2001-2000 |
开发电子数据库和船舶安全记录用与容器有关的技术信息指南 |
Guide for Vessel Related Technical Information for Use in Developing An Electronic Database and Ship Safety Record |
| ANSI/ASTM F 2010-2000 |
通过改进的有孔游戏板试验评定手套灵活性的试验方法 |
Test Method for Evaluation of Glove Dexterity Using a Modified Pegboard Test |
| ANSI/ASTM F 2014-2000 |
管道设备用非增强挤制T形接头规范 |
Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ANSI/ASTM F 2015-2000 |
搭接法兰管端设备规范 |
Specification for Lap Joint Flange Pipe End Applications |
| ANSI/ASTM F 2018-2000 |
使用平应力拉伸样品测定塑料老化时间的试验方法 |
Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens |
| ANSI/ASTM F 2019-2000 |
抽出现场安装的玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)已有管道的实施规程 |
Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ANSI/ASTM F 2021-2000 |
塑料虹吸式屋面排水系统设计和安装的规范 |
Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems |
| ANSI/ASTM F 2022-2001 |
辅助加热器性能的试验方法 |
Test Method for Performance of Booster Heater |
| ANSI/ASTM F 2023-2000 |
交联聚乙烯(PEX)热塑管耐氧化性评定的试验方法 |
Test Method for Evaluating the Oxidative Resistance of PEX Thermoplastic Piping |
| ANSI/ASTM F 2030-2000 |
彩弹球柱体防爆盘组件规范 |
Specification for Paintball Cylinder Burst Disk Assemblies |
| ANSI/ASTM F 2031-2000 |
箭柄静态韧性(劲度)的测量方法 |
Method of Measurement of Arrow Shaft Static Spine (Stiffness) |
| ANSI/ASTM F 2039-2000 |
船上职业卫生与健康和安全保护方案中基本要点指南 |
Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program |
| ANSI/ASTM F 2041-2000 |
彩弹球标记警告规范 |
Specification for Paintball Marker Warnings |
| ANSI/ASTM F 2044-2000 |
液位指示电气设备规范 |
Specification for Liquid Level Indicating Equipment, Electrical |
| ANSI/ASTM F 2045-2000 |
直接和间接读取液位的管形玻璃和塑料观测指示器规范 |
Specification for Indicators, Sight, Liquid Level, Direct/Indirect Reading, Tubular Glass/Plastic |
| ANSI/ASTM F 2046-2000 |
不同转速计规范 |
Specification for Tachometers, Various |
| ANSI/ASTM F 2048-2000 |
防滑试验结果报告的实施规程 |
Practice for Reporting Slip Resistance Test Results |
| ANSI/ASTM F 2053-2000 |
防护服材料的气载粒子渗透试验结果的文献记录指南 |
Guide For Documenting The Results Of Airborne Particle Penetration Testing Of Protective Clothing Materials |
| ANSI/ASTM F 2060-2001 |
冷季维护运动场草皮的指南 |
Guide for Maintaining Cool Season Turfgrasses on Athletic Fields |
| ANSI/ASTM F 2061-2000 |
化学防护服保养和维护说明的实施规程 |
Practice for Chemical Protective Clothing Care and Maintenance Instructions |
| ANSI/ASTM F 2070-2001 |
压力和差动压力电及光纤换能器规范 |
Specification for Transducers, Pressure and Differential Pressure, Electrical and Fiber Optic |
| ANSI/ASTM F 2071-2001 |
位置相近(非接触式)或限值(机械接触式)光纤开关规范 |
Specification for Switch, Position, Proximity (Non-Contact) or Limit (Mechanical Contact), Fiber Optic |
| ANSI/ASTM F 2075-2001 |
置于运动场设备下面和周围的运动场安全表面用工程木纤维规范 |
Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ANSI/ASTM F 2087-2001 |
玻璃纤维编织绳和油绳的包装实施规程 |
Practices for Packing, Fiberglass, Braided, Rope and Wick |
| ANSI/ASTM F 2092-2001 |
燃气或电对流炉规范 |
Specification for Convection Oven Gas or Electric |
| ANSI/ASTM F 2093-2001 |
搁架式烤炉的性能试验方法 |
Test Method for the Performance of Rack Ovens |
| ANSI/ASTM F 2098-2001 |
保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的试验方法 |
Test Method for Stainless Steel Clamps for Securing SDR9 Cross-Linked Polyethylene (PEX) Tubing to Metal Insert Fittings |
| ANSI/ASTM F 2100-2001 |
医用面罩材料的性能规范 |
Specification for Performance of Materials Used in Medical Face Masks |
| ANSI/ASTM F 2101-2001 |
使用金黄色葡萄球菌的生物气溶胶评定医用面罩材料细菌过滤效果(BFE)的试验方法 |
Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus Aureus |
| ANSI/ASTM F 2106-2001 |
装有发动机的人力蹋车设计和性能特征评定的试验方法 |
Test Method for Evaluating Design and Performance Characteristics of Motorized Treadmills |
| ANSI/ASTM F 2107-2001 |
运动场没有草皮部分的建造和维护指南 |
Guide for Construction and Maintenance of Skinned Areas on Sports Fields |
| ANSI/ASTM F 2115-2001 |
电动踏旋器试验方法 |
Test Method for Motorized Treadmills |
| ANSI/ASTM F 2117-2001 |
球类运动场垂直回弹特性的试验方法.声学测量 |
Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement |
| ANSI/ASTM F 2120-2001 |
测试Treestand负荷能力的实施规程 |
Practice for Testing Treestand Load Capacity |
| ANSI/ASTM F 2121-2001 |
Treestand标签实施规程 |
Practice for Treestand Labels |
| ANSI/ASTM F 2122-2001 |
Treestand和安全设备实施规程 |
Practice for Treestand and Safety Devices |
| ANSI/ASTM F 2123-2001 |
Treestand说明实施规程 |
Practice for Treestand Instructions |
| ANSI/ASTM F 2124-2001 |
梯形Treestand、三角形Treestand和提升木棍负荷能力试验的实施规程 |
Practice for Testing Ladder Treestand, Tripod Treestand and Climbing Stick Load Capacity |
| ANSI/ASTM F 2125-2001 |
Treestand静态稳定性的试验方法 |
Test Method for Treestand Static Stability |
| ANSI/ASTM F 2126-2001 |
Treestand静态负荷能力的试验方法 |
Test Method for Treestand Static Load Capacity |
| ANSI/ASTM F 2127-2001 |
Treestand粘着力的试验方法 |
Test Method for Treestand Adherence |
| ANSI/ASTM F 2128-2001 |
Treestand和反复荷载能力的试验方法 |
Test Method for Treestand and Repetitive Loading Capability |
| ANSI/ASTM F 2130-2001 |
测量防护服材料对液体杀虫剂的排斥性、抑制能力和渗透性的试验方法 |
Test Method for Measure Repellency, Retention, and Penetration of Liquid Pesticide Formulation through Protective Clothing Materials |
| ANSI/ASTM F 2133-2001 |
测定钢制船舱壁和甲板上大的碳氢化合物池点火效果的试验方法 |
Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Marine Bulkheads and Decks, Constructed of Steel |
| ANSI/ASTM F 2135-2001 |
模制排水、污物和通风的短型塑料配件规范 |
Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings |
| ANSI/ASTM F 2138-2001 |
天然气设备用超流量阀规范 |
Specification for Excess Flow Valves for Natural Gas Service |
| ANSI/ASTM F 2140-2001 |
食品保温箱性能的试验方法 |
Test Method for Performance of Hot Food Holding Cabinets |
| ANSI/ASTM F 2141-2001 |
Deli加热箱性能试验方法 |
Test Method for Performance of Hot Deli Cases |
| ANSI/ASTM F 2142-2001 |
抽屉式加热器性能试验方法 |
Test Method for Performance of Drawer Warmers |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com