标准号 |
中文名称 |
英文名称 |
| ANSI/AHAM DW-1-1992 |
家用洗碟机标准 |
Household Electric Dishwasher Standard |
| ANSI/AHAM ER-1-1986 |
家用电气炉灶 |
Household Electric Ranges |
| ANSI/AHAM FWD-1-1983 |
家用废弃物食物处理器性能测定程序 |
Household Food Waste Disposers, Performance Evaluation Procedure for |
| ANSI/AHAM HLD-1-1991 |
家用滚筒式衣服干燥机性能评定方法 |
Performance Evaluation Procedure for Household Tumble Type Clothes Dryers |
| ANSI/AHAM HLW-1-2002 |
家用洗衣机性能评定方法 |
(Performance Evaluation Procedure for Household Washers ) |
| ANSI/AHAM HRF-1-2002 |
家用电冰箱/家用制冷机 |
(Household Refrigerators/Household Freezers ) |
| ANSI/AHAM HRF-1-2004 |
家用电冰箱/家用制冷机 |
|
| ANSI/AHAM I-1-2005 |
手持式电熨斗 |
|
| ANSI/AHAM RAC-1-1982 |
房间空气调节器 |
Room Air Conditioners |
| ANSI/AHAM TC-1-1984 |
家用垃圾压实机性能评定方法 |
Performance Evaluation Procedure for Household Trash Compactors |
| ANSI/AIAA G-003A-1996 |
标准大气模型的参考指南 |
Guide to Reference and Standard Atmosphere Models |
| ANSI/AIAA G-020-1992 |
航天器重量和动力意外事故的估计和预算指南 |
Guide for Estimating and Budgeting Weight and Power Contingencies for Spacecraft Systems |
| ANSI/AIAA G-031-1992 |
根据采用DoD-Std-2167A的系统知识的更新周期方法 |
Life Cycle Development of Knowledge Based Systems using DoD-Std 2167A |
| ANSI/AIAA G-034-1999 |
标准离子层模型的参考指南 |
Guide to Reference and Standard Ionosphere Models |
| ANSI/AIAA G-035A-2000 |
人性能测量 |
Human Performance Measurements |
| ANSI/AIAA G-043-1992 |
操作原理的文档准备指南 |
Guide for the Preparation of Operational Concept Documents |
| ANSI/AIAA G-057-1994 |
空间发射系统术语指南 |
Guide to Terminology for Space Launch Systems |
| ANSI/AIAA R-004-1992 |
航空与航天飞行器协调系统的推荐规程 |
Recommended Practice for Atmospheric and Space Flight Vehicle Coordinate Systems |
| ANSI/AIAA R-013-1992 |
软件可靠性 |
Software Reliability |
| ANSI/AIAA R-023A-1995 |
个人计算机对空间系统操作的接口的推荐实施规程 |
Recommended Practice for Human Computer Interfaces for Space System Operations |
| ANSI/AIAA R-024-1993 |
空间操作和支持文件编制 |
Space Operations and Support Documentation |
| ANSI/AIAA R-100A-2001 |
部件管理的推荐操作规程 |
Recommended Practice for Parts Management |
| ANSI/AIAA S-001-1991 |
航天结构的标准术语 |
Standard Terminology for Space Structures |
| ANSI/AIAA S-017-1991 |
气动减速器和降落伞图 |
Aerodynamic Decelerator and Parachute Drawings |
| ANSI/AIAA S-061-1998 |
商用发射安全 |
Commercial Launch Safety |
| ANSI/AIHA Z 9.2-2001 |
本地排气系统的操作设计控制基础 |
Design and Operation of Local Exhaust Systems, Fundamentals Governing the |
| ANSI/AIHA Z 9.3-1994 |
喷涂完成操作.设计,结构和通风的安全编码 |
Spray Finishing Operations - Safety Code for Design, Construction, and Ventilation |
| ANSI/AIHA Z 9.4-1997 |
排气系统.磨料送风操作.固定位置封闭的安全操作规程和通风 |
Exhaust Systems - Abrasive Blasting Operations - Ventilation and Safe Practices for Fixed Location Enclosures |
| ANSI/AIHA Z 9.5-1992 |
实验室通风 |
Laboratory Ventilation |
| ANSI/AIHA Z 9.6-1999 |
磨削、抛光和磨擦用排气系统 |
Exhaust Systems for Grinding, Polishing and Buffing |
| ANSI/AIHA Z 9.7-1998 |
工业加工排放系统中出来的空气的重新回收 |
Recirculation of Air from Industrial Process Exhaust Systems |
| ANSI/AIHA Z10-2005 |
职业卫生和安全管理系统 |
|
| ANSI/AIHA Z9.5-2002 |
实验室通风 |
(Laboratory Ventilation ) |
| ANSI/AIIM MS 1-1996 |
字母数字的计算机输出缩微胶片的推荐操作规程.检验和质量控制的操作规程 |
Recommended Practice for Alphanumeric Computer-Output Microforms - Operational Practices for Inspection and Quality Control |
| ANSI/AIIM MS 10-1987 |
整个缩微胶片传送器的缝隙胶粘剂的保护片的粘性 |
Adhesion of Protection Sheet to Aperture Adhesive of Unitized Microfilm Carrier (Aperture Card), Method for Determining |
| ANSI/AIIM MS 11-1987 |
图像管理的信息.缩微胶片盒 |
Information and Image Management - Microfilm Jackets |
| ANSI/AIIM MS 111-1994 |
显微制图技术.在35mm卷轴胶片上缩微印制报纸的标准推荐实施规程. |
Micrographics - Standard Recommended Practice for Microfilming Printed Newspapers on 35mm Roll Microfilm |
| ANSI/AIIM MS 14-1996 |
16mm和35mm卷轴胶片规范 |
Specifications for 16mm and 35mm Roll Microfilm |
| ANSI/AIIM MS 15-1990 |
16mm加工胶片的单芯盒操作限制和尺寸 |
Dimensions and Operational Constraints for Single-Core Cartridge for 16-mm Processed Microfilm |
| ANSI/AIIM MS 17-1992 |
旋转缩微胶片摄象机的试验图 |
Test Chart for Rotary Microfilm Cameras |
| ANSI/AIIM MS 18-1992 |
缩微摄影术.图像胶片的拼接.尺寸和操作限制 |
Micrographics - Splices for Imaged Film - Dimensions and Operational Constraints |
| ANSI/AIIM MS 19-1993 |
缩微版本的识别推荐规程 |
Identification of Microforms, Recommended Practice for |
| ANSI/AIIM MS 23-1998 |
文件的缩微胶片,操作过程,首先产生的银胶质量控制和检验 |
Microfilm of Documents, Operational Procedures/Inspection and Quality Control of First-Generation Silver-Gelatin |
| ANSI/AIIM MS 24-1996 |
用于在35mm缩微胶片上缩微记录工程制图的试验目标 |
Test Target for Use in Microrecording Engineering Graphics on 35-mm Microfilm |
| ANSI/AIIM MS 26-1990 |
35mm行星摄相机(顶灯形)缩微胶片工程绘图亮度统一性测定规程 |
35-mm Planetary Cameras (Top-Light) - Procedures for Determining Illumination Uniformity of Microfilming Engineering Drawings |
| ANSI/AIIM MS 28-1983 |
显微制图学.字母数字COM质量试验幻灯片 |
Micrographics - Alphanumeric COM Quality Test Slide |
| ANSI/AIIM MS 29-1992 |
显微制图学.显微胶片记录设备的芯和轴 |
Micrographics - Cores and Spools for Microfilm Recording Equipment - Dimensions |
| ANSI/AIIM MS 32-1996 |
35mm缩微胶片上工程源文件的显微记录 |
Microrecording of Engineering Source Documents on 35-mm Microfilm |
| ANSI/AIIM MS 34-1990 |
16mm和35mm缩微胶片上使用的卷轴尺寸 |
Dimensions for Reels Used for 16-mm and 35-mm Microfilm |
| ANSI/AIIM MS 37-1988 |
地图材料的缩微摄影技术的推荐实施规程 |
Recommended Practice for Microphotography of Cartographic Materials |
| ANSI/AIIM MS 37a-1996 |
地图材料的缩微摄影技术的推荐实施规程 |
Recommended Practice for Microphotography of Cartographic Materials |
| ANSI/AIIM MS 38-1995 |
工程制图的缩微记录的推荐实施规程.计算机输出缩微胶片 |
Recommended Practice for the Microrecording of Engineering Graphics - Computer-Output Microfilm |
| ANSI/AIIM MS 4-1987 |
在缩微制图中流程图符号及其使用 |
Flowchart Symbols and Their Use in Micrographics |
| ANSI/AIIM MS 40-1987 |
缩微胶片.计算机辅助检索(CAR)接口命令 |
Microfilm - Computer Assisted Retrieval (CAR) Interface Commands |
| ANSI/AIIM MS 41-1996 |
整体缩微胶片承载器(孔隙,摄相机,拷贝和图像卡片) |
Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards) |
| ANSI/AIIM MS 42-1989 |
信息和图像管理.缩微版本上记录的抹去,删除,改正或增加 |
Information and Image Management - Recommended Practice for the Expungement, Deletion, Correction, or Amendment of Records on Microforms |
| ANSI/AIIM MS 43-1988 |
由文件或由COM复制的质量控制和检验的推荐实施规程 |
Recommended Practice for Operational Procedures/Inspection and Quality Control of Duplicate Microforms of Documents and from COM |
| ANSI/AIIM MS 43a-1991 |
由文件或由COM复制的质量控制和检验的推荐实施规程增补 |
Addendum to Recommended Practice for Operational Procedures/Inspection and Quality Control of Duplicate Microforms of Documents and from COM |
| ANSI/AIIM MS 44-1988 |
图像扫描器的质量控制的推荐实施规程 |
Recommended Practice for Quality Control of Image Scanners |
| ANSI/AIIM MS 46-1996 |
35mm重氮缩微胶片孔隙卡片复制的试验规程 |
Test Procedures for Duplicating 35-mm Diazo Microfilm Aperture Cards |
| ANSI/AIIM MS 48-1990 |
卤化银胶片上缩微公共记录的推荐实施规程 |
Recommended Practice for Microfilming Public Records on Silver-Halide Film |
| ANSI/AIIM MS 49-1993 |
缩微胶片和缩微扫描器的监测质量的推荐实施规程 |
Recommended Practice for Monitoring Quality of Roll Microfilm and Microfiche Scanners |
| ANSI/AIIM MS 5-1992 |
缩微制图的缩微平片 |
Micrographic Microfiche |
| ANSI/AIIM MS 50-1994 |
信息和图像管理标准.标准推荐实施规程.孔隙卡胶片图像扫描器的监测图像质量 |
Standard for Information and Image Management - Standard Recommended Practice - Monitoring Image Quality of Apperture Card Film Image Scanners |
| ANSI/AIIM MS 52-1991 |
用于光学扫描的源文件的要求和特性的推荐实施规程 |
Requirements and Characteristics of Original Documents Intended for Optical Scanning, Recommended Practice for the |
| ANSI/AIIM MS 53-1993 |
图像交换和使用的文件格式.双水平图像文件格式:第1部分 |
File Format for Storage and Exchange of Images - Bi-Level Image File Format: Part 1 |
| ANSI/AIIM MS 54-1993 |
文件图像设备上控制的图形符号 |
Graphic Symbols for Controls on Document Imaging Equipment |
| ANSI/AIIM MS 55-1994 |
图像管理的信息.在电子图形管理环境下图像自动处理用页检索和识别的标准推荐规程 |
Information and Image Management - Standard Recommended Practice for Identification and Indexing of Page Components (Zones) for Automated Processing in an Electronic Image Management (EIM) Environment |
| ANSI/AIIM MS 58-1996 |
扫描机用的小计算机接口应用的标准推荐实施规程 |
Standard Recommended Practice for Implementation of Small Computer Systems Interface (SCSI-2), (X3.131.1994) for Scanners |
| ANSI/AIIM MS 59-1996 |
在光学数字数据盘上存储信息验证的媒体出错监测和报告技术的标准推荐实施规程 |
Standard Recommended Practice for Media Error Monitoring and Reporting Techniques for Verification of the Information Stored in Optical Digital Data Disks |
| ANSI/AIIM MS 6-1993 |
缩微胶片包装标签 |
Microfilm Packaging Labeling |
| ANSI/AIIM MS 60-1996 |
信息和图像管理.标准.电子折叠交换数据流 |
Information and Image Management - Standard - Electronic Folder Interchange Datastream |
| ANSI/AIIM MS 61-1996 |
文件图像系统中扫描器的应用程序接口 |
Application Programming Interface (API) for Scanners in Document Imaging Systems |
| ANSI/AIIM MS 62-1999 |
具有内部电子形式发生系统的计算机输出缩微胶片记录系统的推荐实施规程.检验和质量控制的操作规程 |
Recommended Practice for COM Recording Systems Having an Internal Electronic Forms Generating System - Operational Practices for Inspection and Quality Control |
| ANSI/AIIM MS 8-1988 |
图像标记检索系统中的文件标记的使用 |
Document Mark (Blip) Used in Image Mark Retrieval Systems |
| ANSI/AIIM MS 9-1987 |
缩微胶片整体传送器的安装区域的厚度的测量方法 |
Thickness of Build-up Area on Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards), Method for Measuring |
| ANSI/AIIM MS 9a-1995 |
缩微胶片整体传送器的安装区域的厚度的测量方法 |
Method for Measuring Thickness of Buildup Area on Unitized Microfilm Carriers (Aperture, Camera, Copy and Image Cards) |
| ANSI/AIIM TR 1-1993 |
计量指南 |
Guidelines for Metrics (NOT AN AMERICAN NATIONAL STANDARD) |
| ANSI/AIM BC 1-1995 |
统一符号规范.编码39 |
Uniform Symbology Specification - Code 39 |
| ANSI/AIM BC 2-1995 |
统一符号规范.5的2交错 |
Uniform Symbology Specification - Interleaved 2-Of-5 |
| ANSI/AIM BC 3-1995 |
统一符号规范.条形码 |
Uniform Symbology Specification - Codabar |
| ANSI/AIM BC 4-1995 |
统一符号规范.128编码 |
Uniform Symbology Specification Code 128 |
| ANSI/AIM BC 5-1995 |
统一符号规范.93编码 |
Uniform Symbology Specification Code 93 |
| ANSI/AIM BC 6-1995 |
统一符号规范.49编码 |
Uniform Symbology Specification - Code 49 |
| ANSI/AIM BC 7-1995 |
统一符号规范.16K编码 |
Uniform Symbology Specification - Code 16K |
| ANSI/AIM BC-10-1997 |
AIM国际技术规范.国际符号规范.最大编码 |
AIM International Technical Specification - International Symbology Specification - MaxiCode |
| ANSI/AIM BC-11-1997 |
AIM国际技术规范.国际符号规范.数据矩阵 |
AIM International Technical Specification - International Symbology Specification - Data Matrix |
| ANSI/AIM BC-12-1998 |
统一符号规范.通道编码 |
Uniform Symbology Specification - Channel Code |
| ANSI/AIM BC-13-1998 |
统一符号规范.Aztec编码 |
International Symbology Specification - Aztec Code |
| ANSI/AISC 341-2002 |
钢结构建筑物的有关地震条款 |
(Seismic Provisions for Structural Steel Buildings ) |
| ANSI/AISC 341-2005 |
结构钢建筑物的有关地震条款 |
|
| ANSI/AISC 360-2005 |
结构钢建筑物的规范 |
|
| ANSI/AISC N 690-1994 |
核设施与安全有关的钢结构的设计,生产,建造规范 |
Design, Fabrication, and Erection of Steel Safety-Related Structures for Nuclear Facilities, Specification for the |
| ANSI/AISC N690 Supplement 1-2002 |
核设施用的与安全有关的钢制结构的设计、建造和装配规范 |
(Specification for the Design, Fabrication, and Erection of Steel Safety-Related Structures for Nuclear Facilities ) |
| ANSI/AISC N690-2004 |
核设施用与安全有关的钢结构的设计、生产和建造规范 |
|
| ANSI/AISC N690-2004 |
核设施用与安全有关的钢结构的设计、生产和建造规范 |
|
| ANSI/AISI CFSSPEC-1996 |
冷轧成型钢部件的设计规范1996 |
1996 Specification for the Design of Cold-Formed Steel Structural Members |
| ANSI/AISI COFS/GP-2004 |
冷成型钢结构.一般规定 |
|
| ANSI/AISI COFS/HEADER DESIGN-1a-2001 |
冷成型钢架.横梁的设计 |
Cold-Formed Steel Framing - Header Design |
| ANSI/AISI COFS/HEADER-2004 |
冷成型钢结构.锻造机设计 |
|
| ANSI/AISI COFS/L 99-1-2001 |
冷轧成型钢框架.顶端设计 |
Cold-Formed Steel Framing - Header Design |
| ANSI/AISI COFS/LATERAL-2004 |
冷成形钢框架构筑.侧面设计 |
|
| ANSI/AISI COFS/PM-2001 |
冷成型钢架.用于一两户家庭住所的惯用方法 |
Cold-Formed Steel Framing - Prescriptive Method for One and Two Family Dwellings |
| ANSI/AISI COFS/PMSupplement-2004 |
冷成形钢框架构筑.单户或两户住宅的规范方法.2001版(补充件) |
|
| ANSI/AISI COFS/TRUSS-2002 |
冷成型钢架.桁架设计 |
Cold-Formed Steel Framing - Truss Design |
| ANSI/AISI COFS/TRUSS-2004 |
冷成型钢结构.桁架设计 |
|
| ANSI/AISI COFS/WSD-2004 |
冷成形钢框架构筑.壁柱设计 |
|
| ANSI/AISI/COS TS-6-2004 |
板式和锚式结构试验标准程序 |
|
| ANSI/AISI/COS TS-8-2004 |
固定接缝屋顶系统承重檩条的基本试验方法 |
|
| ANSI/AITC A 190.1-1992 |
木材产品.胶粘结构的层状板 |
Wood Products - Structural Glued Laminated Timber |
| ANSI/AITC A190.1-2002 |
木材产品.胶粘结构的层状板 |
(Wood Products - Structural Glued Laminated Timber ) |
| ANSI/ALI ALIS-2001 |
自动提升机.安装和运行的安全要求 |
Automotive Lifts - Safety Requirements for Installation and Service |
| ANSI/ALI ALOIM-1994 |
自动电梯.操作安全要求,检验和维修 |
Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance |
| ANSI/ALI B 153.1-1990 |
自动升降机.安装,保养和使用的安全要求 |
Automotive Lifts - Safety Requirements for the Construction, Care, and Use |
| ANSI/AMCA 204-1996 |
风扇的平衡质量和振动级别 |
Balance Quality and Vibration Levels for Fans |
| ANSI/AMCA 210-1985 |
风扇额定值的实验测试方法 |
Laboratory Methods of Testing Fans for Rating (also designated ANSI/ASHRAE 51-1985) |
| ANSI/AMCA 240-1996 |
额定正压通风机的实验室测试方法 |
Laboratory Method of Testing Positive Pressure Ventilators for Rating |
| ANSI/AMCA 250-2005 |
测试喷气式烟道风扇性能的实验室方法 |
|
| ANSI/AMCA 330-1986 |
风扇导管内声功率的实验室测试程序 |
Laboratory Method of Testing In-Duct Sound Power Measurement Procedure for Fans (also designated ANSI/ASHRAE 68-1986) |
| ANSI/AMCA 510-2004 |
测定重负荷节气闸的试验方法 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com